Title: Antminer overclocking advice Post by: Travis726 on January 07, 2018, 01:07:27 AM I picked up an old s5 a while back.
Right now I have it set at 375, getting 1.3-1.4 GH/s. One chain seems to max out at about 57 degrees, and the other one about 10 degrees cooler (chain 1 is the hotter of the two). Is the difference in heat normal? Or should I maybe pull it apart and give it a good cleaning? Right now I am running it with the stock fan, with the blue wire removed to disable PWN as I heard stories of them frying when they loose internet. Im assuming they fixed that via firmware, but I prefer the fan maxed anyway. I also have one of these on order that will arrive tomoorw for the pull on a push/pull setup Looks like it should work pretty well. https://www.amazon.com/gp/product/B009OWRMZ6/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 My question is when overclocking, is my main concern to watch the heat and hardware errors and if they are acceptable I can still crank it up? EDIT: Im using a 980 watt server power supply model number "DPS980CBA" |