Bitcoin Forum

Hi,
Trying to mine Litecoin using my NVIDIA GeForce GTX 550 Ti and getting the following error when trying to mine using GUIScript. Settings are:

Host: ltc-stratum.kattare.com
Port: 3333
Username: x.x
Password x
I just chose GPU defaults for 5750, probably should change that.
Use Stratum: Yes

Any help appreciated, I've updated graphics drivers too.

2013-08-18 16:38:36: Listener for "Default": [2013-08-18 16:38:33] Started cgminer 2.11.3
2013-08-18 16:38:36: Listener for "Default": [2013-08-18 16:38:33] Error -1: Getting Device IDs (num)
2013-08-18 16:38:36: Listener for "Default": [2013-08-18 16:38:33] ADL found less devices than opencl!
2013-08-18 16:38:36: Listener for "Default": [2013-08-18 16:38:33] There is possibly more than one display attached to a GPU
2013-08-18 16:38:36: Listener for "Default": [2013-08-18 16:38:33] Use the gpu map feature to reliably map OpenCL to ADL
2013-08-18 16:38:36: Listener for "Default": [2013-08-18 16:38:33] WARNING: Number of OpenCL and ADL devices did not match!
2013-08-18 16:38:36: Listener for "Default": [2013-08-18 16:38:33] Hardware monitoring may NOT match up with devices!
2013-08-18 16:38:36: Listener for "Default": [2013-08-18 16:38:33] Probing for an alive pool
2013-08-18 16:38:36: Listener for "Default": (1s):0.000 (avg):0.000h/s | Q:1  A:0  R:0  HW:0  E:0%  U:0.0/m
2013-08-18 16:38:38: Listener for "Default": [2013-08-18 16:38:36] Error: clEnqueueReadBuffer failed error -5. (clEnqueueReadBuffer)
2013-08-18 16:38:38: Listener for "Default": [2013-08-18 16:38:36] GPU 0 failure, disabling!
2013-08-18 16:38:38: Listener for "Default": [2013-08-18 16:38:36] Thread 0 being disabled
2013-08-18 16:38:38: Listener for "Default": (1s):0.000 (avg):0.000h/s | Q:1  A:0  R:0  HW:0  E:0%  U:0.0/m
2013-08-18 16:38:40: Listener for "Default": (1s):0.000 (avg):0.000h/s | Q:1  A:0  R:0  HW:0  E:0%  U:0.0/m
2013-08-18 16:38:42: Listener for "Default": (1s):0.000 (avg):0.000h/s | Q:1  A:0  R:0  HW:0  E:0%  U:0.0/m

Thanks!