Bitcoin Forum

Bitcoin => Mining software (miners) => Topic started by: DolleTeam on January 27, 2018, 02:03:43 PM



Title: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: DolleTeam on January 27, 2018, 02:03:43 PM
Dear community,

Website: http://www.dollemizer.com

I'm here to tell you that we made the Dollemizer875 Version to adjust your S9, S9i or T9 miner (Tested).
With this Upgrade, you will experience a new interface to adjust your miner settings and get more hash rate or less power usage.
We have tested these versions on various S9, S9i, and T9 miners and can say they work very stable compared to other firmware out there.  


DOWNLOAD FIRMWARE: (improved Firmware boosted up to 875 MHz!)

- Europe version: https://drive.google.com/open?id=1TdsON3q9WQUN-4G_OXRKP91k4dhYYmw0
- USA version: https://drive.google.com/open?id=1jyQ_XjlLJA0YN34KYPF7SFXuFws1x8qX
- China Version: https://drive.google.com/open?id=1DUTrVImPhqV4_tWmAUP9pDkWWKVofpGm
- Canada Version: https://drive.google.com/open?id=14CiW7_NV_zM2Aky5OEBMb5RLBgKz0rRp
- Singapore Version: https://drive.google.com/open?id=1x8WbHVI-oO-c46_Oq7TcnbSgX8y-sq74

Choose the version which is closest to your region for the best experience!

Join our Twitter for the latest updates about our progress. https://twitter.com/dollemizer



How to upgrade your Antminer

  •  Download the firmware
  •  Go to your Antminer interface (IP-address of your Antminer)
  •  Navigate to “System” -> “Upgrade” page https://ibb.co/ensOZy]Upgrade Page
  •  Click on Choose file at “Flash new firmware image” https://ibb.co/cjBHuy
  •  Select the firmware “Lite or Basic” you just downloaded. https://ibb.co/eBZsSJ
  •  Click “Flash image”
  •  Click “Yes” in the popup
  •  Wait 1-5 minutes for the firmware upgrade
  •  IMPORTANT DO NOT:  Do not power off the miner or unplug the ethernet cable during the firmware upgrade.



    Next versions to come will include:

    -Asic Boost
    -Higher adjustment settings (1000 Mhz) (Update> Soon 1175 MHz)
    -Fan Speed Optimization
    -Disable Fans
    -Remove Antbleed inside the BMminer
    -Autotune configuration
    -Full control for each chain

    Please let us know what extra features we should implement as well in your opinion down below in the comment.
    And join our Slack channel:Join Dollemizer Slack Channel (https://join.slack.com/t/dollemizer/shared_invite/enQtMzkxOTcwODI4OTE4LWJiYjk2OTk2MTI2Nzg3MzY5YzMzOThiZTY2Y2NjMmRiODY5MDU1ZDFjNjc5MzM1ZDY3YTM3OGUyMjZmYjA0MzQ)

    If you face any issue's don't hesitate to contact us on Bitcointalk or slack. Our team will take a look at it and resolve the incident.


    Please make sure u know what you're doing. The software will allow you to make huge changes to your machine which if not used correctly might bring damage to it.
    We take no responsibility or liability for any damages including. This software comes with a small build in fee of 1,9%.

    We thank you for supporting our quest for better mining capabilities for everyone!

    The Dolleteam!


    REVIEW:

    Guntis V from Mineshop.eu is reviewing our product and explains it in detail: Youtube-Video (https://www.youtube.com/watch?v=gB3cBV2JpqU)


Title: Re: [NEWS] Antminer S9 CUSTOM FIRMWARE!
Post by: Likai31197 on January 28, 2018, 01:45:48 PM
Will it be open source? And does this implement any new efficiencies, or does it just provide extra controls? Also will there be a fee associated (like the BlissZ firmware for the D3)?

I would like to learn more about this. If there is any benefit to running this firmware, I can get a massive amount of hashrate on this. PM me if you can (you are not accepting messages right now).
I can provide detailed testing data on all makes and models of antminers produced within the past year and a half or so. Anything between 11TH and 14TH models, including all (if not most) hashboard makes (L1, L1D, L3, V4, V5, V6, C). I can also test Awesome Miner compatibility.

Features of use would be voltage and frequency control, first and foremost. Any other minor efficiencies would also be appreciated.
Odd suggestion would be web-panel control of the NTP settings. Right now they are using the public ntp pool by default, and there's lots of oddball sites that are connected to. The date information has proven to be fairly incorrect lately, and some machines exchange abnormal amounts of packets with these random servers. I randomly came across one that belonged to a Satan worshipper IRC that miners were connecting to for NTP and exchanging an unusual amount of packets on the regular (10x or more from a normal ntp response).  Just looks sketchy.

An auto-adjust function would be very useful as well, for frequency and voltage. For people who operate at extremely low temperatures, having an auto-adjust option would be useful for finding a safe overclock setting without all the manual setting of each machine.

Likewise it would be neat if an automatic fallback setting was implemented, so if temperatures begin to rise too much to operate, and the miner is presently overclocked, it will return to factory settings until temperatures reach a low threshold again. This in conjunction with the last suggestion would actually be really useful.


Title: Re: [NEWS] Antminer S9 CUSTOM FIRMWARE!
Post by: does on January 28, 2018, 07:10:29 PM
what kind of difference in hashrate do u see between the 2 (ur firmware vs BM one)

and what kind of changes would u want to do that u dont have at the moment with BM firmware

BM firmware is open source isnt it?? ( i remmber bleed ant vuln.. which they reply it was open source)


Title: Re: [NEWS] Antminer S9 CUSTOM FIRMWARE!
Post by: fanatic26 on January 29, 2018, 06:46:10 PM
Odd suggestion would be web-panel control of the NTP settings. Right now they are using the public ntp pool by default, and there's lots of oddball sites that are connected to. The date information has proven to be fairly incorrect lately, and some machines exchange abnormal amounts of packets with these random servers. I randomly came across one that belonged to a Satan worshipper IRC that miners were connecting to for NTP and exchanging an unusual amount of packets on the regular (10x or more from a normal ntp response).  Just looks sketchy.

I have had NTP flooding problems on my network due to the large number of miners that I run. What I ended up doing was running an NTP server in house and using my ASA to reroute all NTP traffic to the internal server. This and an in house dns server really took the strain off of my security devices because these miners do make an insane number of NTP requests.


Title: Re: [NEWS] Antminer S9 CUSTOM FIRMWARE!
Post by: dolleminer on January 30, 2018, 03:02:28 PM
Will it be open source? And does this implement any new efficiencies, or does it just provide extra controls? Also will there be a fee associated (like the BlissZ firmware for the D3)?

I would like to learn more about this. If there is any benefit to running this firmware, I can get a massive amount of hashrate on this. PM me if you can (you are not accepting messages right now).
I can provide detailed testing data on all makes and models of antminers produced within the past year and a half or so. Anything between 11TH and 14TH models, including all (if not most) hashboard makes (L1, L1D, L3, V4, V5, V6, C). I can also test Awesome Miner compatibility.

Features of use would be voltage and frequency control, first and foremost. Any other minor efficiencies would also be appreciated.
Odd suggestion would be web-panel control of the NTP settings. Right now they are using the public ntp pool by default, and there's lots of oddball sites that are connected to. The date information has proven to be fairly incorrect lately, and some machines exchange abnormal amounts of packets with these random servers. I randomly came across one that belonged to a Satan worshipper IRC that miners were connecting to for NTP and exchanging an unusual amount of packets on the regular (10x or more from a normal ntp response).  Just looks sketchy.

An auto-adjust function would be very useful as well, for frequency and voltage. For people who operate at extremely low temperatures, having an auto-adjust option would be useful for finding a safe overclock setting without all the manual setting of each machine.

Likewise it would be neat if an automatic fallback setting was implemented, so if temperatures begin to rise too much to operate, and the miner is presently overclocked, it will return to factory settings until temperatures reach a low threshold again. This in conjunction with the last suggestion would actually be really useful.

Hello Lakai31197,

I am a part of Dolleteam, Sorry for the late reaction. Last days we are quite busy with Antminer S9.

Our first goal what we want to achieve is:
1. Voltage control
2. Frequency control
3. Fan control
4. Tweaking tab on the web-interface
5. Bring CGminer back.

We also going to try different overclocking / under volt. With the D3 we also get better numbers than the stock version.
When we are finished with our goals we will take a look at the NTP settings and find coding what will improve the S9 hashrate.
Also, we will delete every malicious coding inside of the Antminer see Antbleed, Call-home, Auto factory default, Kill miner and many more.

Right now we are able to control the voltage by coding but still in testing phase. Adjust the frequency is already working as it should be.
We work right now on Bmmminer we have seen that CGminer is not stable yet on Bitmain firmware. We will work on that in the next phase


Title: Re: [NEWS] Antminer S9 CUSTOM FIRMWARE!
Post by: DolleTeam on January 30, 2018, 05:32:11 PM
Dear community,

Like Dolle said we are verry bussy. I will try to keep you guys updated from time to time.

Right now we are able to undervolt / controll fanspeed and set freqencys on the S9 miner. We are testing multiple machines to see what settings are "safe" in normal opperation so we can adjust the web interface in such way the risks will stay to a minimum to the users. About the BMminer, yes Bitmain did a verry good job at putting some "Bitmain beneficial" software into the BMminer and the OS itselve as well.
I wont go into details about those things for now. All i can tell so far is that Bitmain is getting more and more creative to avoid people making there own software for their miners, atleast for their sha256 miners.

@ fanatic26, thanks for the NTP tip. We will work on that as well after we finish the product!
@Likai31197, we are not sure yet what the results will be when we finish the product, Right now we had the S9 running at 15.5 TH/s. This was just to see how fast we could go, our testing phase isnt done yet. Our first goal is more TH/s with less power and no more shady software inside.


Title: Re: [NEWS] Antminer S9 CUSTOM FIRMWARE!
Post by: DarkPoe on February 01, 2018, 04:34:01 PM
Do you guys know if this would work on T9s?


Title: Re: [NEWS] Antminer S9 CUSTOM FIRMWARE!
Post by: HoleShot on February 02, 2018, 03:45:05 PM
This is awesome.

Please let me know if you can also disable the fan so it can be unequipped.

Can one control board handle more than 3 hash boards. It looks like there's space for many more.



Title: Re: [NEWS] Antminer S9 CUSTOM FIRMWARE!
Post by: Likai31197 on February 03, 2018, 03:07:30 PM
Automatic reboot on ASIC failure or low hashrate would be useful as well. It has been my experience that quite a few S9 models shut down hashboards for inexplicable reasons, and they do not return until manually rebooted.

Also, do you folks have any means of direct contact? Who is working on this exactly? I would like to send an inquiry but your new accounts are not accepting messages.


Title: Re: [NEWS] Antminer S9 CUSTOM FIRMWARE!
Post by: LavaJack on February 03, 2018, 04:52:39 PM
Automatic reboot on ASIC failure or low hashrate would be useful as well. It has been my experience that quite a few S9 models shut down hashboards for inexplicable reasons, and they do not return until manually rebooted.

Also, do you folks have any means of direct contact? Who is working on this exactly? I would like to send an inquiry but your new accounts are not accepting messages.

This has also happened to me.


Title: Re: [NEWS] Antminer S9 CUSTOM FIRMWARE!
Post by: DolleTeam on February 06, 2018, 12:22:35 PM
@DarkPoe, I do not think it will work on the T9. We don't have a T9.

@HoloShot, Yes we can disable the fan. We are not testing the hardware. We focus first on the firmware. In the later phase, we are able to test if we can run more blades on 1 S9. I think it will work since there is 1 slot available.

@Likai31197, Yes we are working on auto reboot when one of the chips or board will fail. We also build in an auto reboot when the temps goes to high.


Title: Re: [NEWS] Antminer S9 CUSTOM FIRMWARE!
Post by: DarkPoe on February 06, 2018, 03:16:12 PM
@DolleTeam,

I am not trying to bash you in any way, as I have 40 S9's and I will delightfully test your firmware, but just saying, IIRC, T9s are just S9s with overvoltaje and less capable chips, which could just be IMHO some tweaks on the parameters... Anyway, I am saying this cuz I have a T9 which gets hot during the day and can only work through the night so I might just as well use it as a guinea pig for this


Title: Re: [NEWS] Antminer S9 CUSTOM FIRMWARE!
Post by: HoleShot on February 06, 2018, 08:44:56 PM
Thanks for answering everyone's questions.

I want the firmware as soon as possible. It would be the best way for me to control the miner for my cooling project.


Title: Re: [NEWS] Antminer S9 CUSTOM FIRMWARE!
Post by: vonRau on February 10, 2018, 06:40:01 AM
Could you offer me any software or modified firmware that gives me the possibility to remove the fans?
I want to run the S9 with immerse cooling and the 3M Novec liquid requires removed fans.

It is urgent and we would pay for your service!


Title: Re: [NEWS] Antminer S9 CUSTOM FIRMWARE!
Post by: vonRau on February 14, 2018, 06:52:46 AM
I am running my S9´s in liquid paraffin and the Chip temperature is stabil 35°C
Even I am cooling that much my energy consumption is not dropping down. I need about 1300 W
Our air-cooled S9´s are running with Chip temperatures of 60°C (ambient temperature is 6°C) at 1390 W.

question/need: I want to remove the 2 fans - how is it possible without booting error?

question/need: how is it possible to increase the frequency to get for example 16 TH/s?

question/need: how is the ratio V (Volt) to frequency

Please support us, we would pay for your kind service.


Title: Re: [NEWS] Antminer S9 CUSTOM FIRMWARE!
Post by: Sandal_Hat on February 16, 2018, 02:43:06 PM
If u design one, can perhaps not have a dev fee that charges by mining to a dev pool. This is because the S9 takes up to 20mins to switch pools. It would be inefficient.


Title: Re: [NEWS] Antminer S9 CUSTOM FIRMWARE!
Post by: aaroncross on February 19, 2018, 09:10:19 PM
This ever going to be available?


Title: Re: [NEWS] Antminer S9 CUSTOM FIRMWARE!
Post by: NotFuzzyWarm on March 09, 2018, 04:55:58 PM
Are you going to support ASICBOOST ?
Have you even read the technicals about what AB is? Apparently not.
AB requires the hardware - chips - to have different circuitry to handle the AB functions. It is not just software...


Title: Re: [NEWS] Antminer S9 CUSTOM FIRMWARE!
Post by: aaroncross on March 10, 2018, 01:23:25 PM
So I take it this is a dead post and project.. Thats a real bummer.


Title: Re: [NEWS] Antminer S9 CUSTOM FIRMWARE!
Post by: rifleman74 on March 11, 2018, 08:10:29 PM
So I take it this is a dead post and project.. Thats a real bummer.

This went over about as well as a wet fart. 


Title: Re: [NEWS] Antminer S9 CUSTOM FIRMWARE!
Post by: jfaubin on March 21, 2018, 08:05:27 PM
Hi Dolle Team,

Do you have a good news from your custom Firmware?

Thanks!

J-F



Moderator's note: This post was edited by frodocooper to remove an unnecessary quote.


Title: Re: [NEWS] Antminer S9 CUSTOM FIRMWARE!
Post by: FatAnt on April 06, 2018, 12:38:11 AM
We have developed a tuning to switch off Fans (for immersed cooling systems), set MHz and set mV
Maximum possible hashrate (depending on your basic ASIC quality) is about 19-21 TH/s
questions?

Does your firmware work on all versions of S9's?  Is it available to order?  At what price?



Moderator's note: This post was edited by frodocooper to correct erroneous quote formatting.


Title: Re: [NEWS] Antminer S9 CUSTOM FIRMWARE!
Post by: vonRau on April 07, 2018, 05:07:09 AM
Does your firmware work on all versions of S9's?  Is it available to order?  At what price?

This firmware runs on all S9 machines. You can order. Send me PM.



Moderator's note: This post was edited by frodocooper to trim the quote from FatAnt.


Title: Re: [NEWS] Antminer S9 CUSTOM FIRMWARE!
Post by: chucklaw on April 07, 2018, 09:12:04 AM
I am interested in your firmware, but I can’t pm u. Can u pm me for the details?


Title: Re: [NEWS] Antminer S9 CUSTOM FIRMWARE!
Post by: vonRau on April 07, 2018, 11:04:51 AM
I am interested in your firmware, but I can’t pm u. Can u pm me for the details?

please send me a mail - see the symbol below my username


Title: Re: [NEWS] Antminer S9 CUSTOM FIRMWARE!
Post by: vonRau on April 07, 2018, 02:00:07 PM
please send me a mail - see the symbol below my username

viennacalling@me.com


Title: Re: [NEWS] Antminer S9 CUSTOM FIRMWARE!
Post by: ForumMan on April 12, 2018, 02:34:29 PM
Dear community,

Like Dolle said we are verry bussy. I will try to keep you guys updated from time to time.

Right now we are able to undervolt / controll fanspeed and set freqencys on the S9 miner. We are testing multiple machines to see what settings are "safe" in normal opperation so we can adjust the web interface in such way the risks will stay to a minimum to the users. About the BMminer, yes Bitmain did a verry good job at putting some "Bitmain beneficial" software into the BMminer and the OS itselve as well.
I wont go into details about those things for now. All i can tell so far is that Bitmain is getting more and more creative to avoid people making there own software for their miners, atleast for their sha256 miners.

Is it work fine on S9 with 13,5 THs builded in autumn 2017?
This solution from this forum didnt work in real testing:
https://bitcointalk.org/index.php?topic=2809499.msg34536940#msg34536940

May I test it on one of my miners?


Title: Re: [NEWS] Antminer S9 CUSTOM FIRMWARE!
Post by: vonRau on April 12, 2018, 03:35:08 PM
Is it work fine on S9 with 13,5 THs builded in autumn 2017?
This solution from this forum didnt work in real testing:
https://bitcointalk.org/index.php?topic=2809499.msg34536940#msg34536940

May I test it on one of my miners?

How many miner do you run?
My minimum quantity to sell is 100 upgrades.
There are lots to change in the miner´s file system and I have to exchange the bmminer.
Finally you are able to set MHz, mV and are able to unplug the fans ....
It is fully functional and running without HW errors



Moderator's note: This post was edited by frodocooper to remove a nested quote.


Title: Re: [NEWS] Antminer S9 CUSTOM FIRMWARE!
Post by: titans00983 on April 13, 2018, 08:00:48 AM
How many miner do you run?
My minimum quantity to sell is 100 upgrades.
There are lots to change in the miner´s file system and I have to exchange the bmminer.
Finally you are able to set MHz, mV and are able to unplug the fans ....
It is fully functional and running without HW errors

Can you share results of your firmware?

On average, what % increase in hashrate will the firmware produce?

A 13.5TH machine could potentially achieve what hashrate?

What are the affects on fanspeeds and temps? Etc

Very interested but would like to know what, if any, successful results the firmware has achieved.



Moderator's note: This post was edited by frodocooper to remove nested quotes.


Title: Re: [NEWS] Antminer S9 CUSTOM FIRMWARE!
Post by: vonRau on April 13, 2018, 07:45:23 PM
Can you share results of your firmware?

On average, what % increase in hashrate will the firmware produce?

A 13.5TH machine could potentially achieve what hashrate?

What are the affects on fanspeeds and temps? Etc

Very interested but would like to know what, if any, successful results the firmware has achieved.

13,5 TH miner achieves between 19,5 - 20,5 TH/s
BUT this is mandatory to a submerged cooling system and a 2800W PSU
Power consumption is about 2,5kW @ 20TH/s
Fan - OFF
temperatur is up to your needs: we can regulate it between 50°C and 110°C
All temp settings are running without any HW errors



Moderator's note: This post was edited by frodocooper to remove nested quotes.


Title: Re: [NEWS] Antminer S9 CUSTOM FIRMWARE!
Post by: ccgllc on April 14, 2018, 12:43:39 AM
13,5 TH miner achieves between 19,5 - 20,5 TH/s
BUT this is mandatory to a submerged cooling system and a 2800W PSU
Power consumption is about 2,5kW @ 20TH/s
Fan - OFF
temperatur is up to your needs: we can regulate it between 50°C and 110°C
All temp settings are running without any HW errors

So 2500 watts for 20Th = 125 watts/TH right?  A normal 13.5 S9 draws ~1452 watts for about 108 watts/TH.  So running at that speed decreases efficiency about 16%, and requires submerged cooling.  Other than bragging rights and maybe noise control, why would one want to do this?


Title: Re: [NEWS] Antminer S9 CUSTOM FIRMWARE!
Post by: vonRau on April 14, 2018, 12:53:38 AM
So 2500 watts for 20Th = 125 watts/TH right?  A normal 13.5 S9 draws ~1452 watts for about 108 watts/TH.  So running at that speed decreases efficiency about 16%, and requires submerged cooling.  Other than bragging rights and maybe noise control, why would one want to do this?

I do not know what your mining facility is looking alike, but modern data centers are cooled and that needs energy.
For example: a room with 60m3 (similar to one 40" sea container) equipped with 100 units of S9 is regular heated with 150kW.
That means you have to get rid of the heat produced. Assume you would not open the windows and the ambient temperature would be 25°
(which is the reference temperature of the energy efficiency of any electronic), the 100 units of S9 would let increase the temperature of
that room up to 120°C within minutes. Finally you have to blow out that heat with big fans and try to cool down.

Such cooling system needs lots of kW. In average air cooled mining farms need about 25-35% of their total energy costs for cooling. And the result is hot air released to the atmosphere ....

We are exchanging the heat with water and that could be used pretty easy and is way cheaper than old fashioned air cooling.

by the way: as energy is only 10-35% of the revenue, increase of TH is increase of profit. You will never increase TH that much without liquid cooling!



Moderator's note: This post was edited by frodocooper to remove a nested quote.


Title: Re: [NEWS] Antminer S9 CUSTOM FIRMWARE!
Post by: ccgllc on April 14, 2018, 01:37:07 AM
I do not know what your mining facility is looking alike, but modern data centers are cooled and that needs energy.
For example: a room with 60m3 (similar to one 40" sea container) equipped with 100 units of S9 is regular heated with 150kW.
That means you have to get rid of the heat produced. Assume you would not open the windows and the ambient temperature would be 25°
(which is the reference temperature of the energy efficiency of any electronic), the 100 units of S9 would let increase the temperature of
that room up to 120°C within minutes. Finally you have to blow out that heat with big fans and try to cool down.

Such cooling system needs lots of kW. In average air cooled mining farms need about 25-35% of their total energy costs for cooling. And the result is hot air released to the atmosphere ....

We are exchanging the heat with water and that could be used pretty easy and is way cheaper than old fashioned air cooling.

by the way: as energy is only 10-35% of the revenue, increase of TH is increase of profit. You will never increase TH that much without liquid cooling!

My mining facility currently has about 125 S9s in it and is air cooled, similar to the way Yahoo data centers do it.  I recirculate hot aisle air in the winter to keep the cold aisle around 55F.  The rest of the heat, and all of it during warmer seasons, is vented out the top of the roof by natural convection.  Only fans other than the recirculating one are those on the miners, plus two small units at the top of the cold aisle that exhaust any accumulated hot air at the ceiling of that aisle.  e.g. My facility was designed for mining, its not a retrofitted data center.

Water cooling is efficient, in terms of extracting heat, but your still releasing it into the environment.  Any hot water you eject is either going into a ground loop and heating the soil, or into a stream and heating that water with associated environmental impacts (reduced oxygen capacity of the water until it radiates the extra heat to the atmosphere for you).  Hopefully your using a closed ground loop.


Title: Re: [NEWS] Antminer S9 CUSTOM FIRMWARE!
Post by: vonRau on April 14, 2018, 03:50:48 AM
My mining facility currently has about 125 S9s in it and is air cooled, similar to the way Yahoo data centers do it.  I recirculate hot aisle air in the winter to keep the cold aisle around 55F.  The rest of the heat, and all of it during warmer seasons, is vented out the top of the roof by natural convection.  Only fans other than the recirculating one are those on the miners, plus two small units at the top of the cold aisle that exhaust any accumulated hot air at the ceiling of that aisle.  e.g. My facility was designed for mining, its not a retrofitted data center.

Water cooling is efficient, in terms of extracting heat, but your still releasing it into the environment.  Any hot water you eject is either going into a ground loop and heating the soil, or into a stream and heating that water with associated environmental impacts (reduced oxygen capacity of the water until it radiates the extra heat to the atmosphere for you).  Hopefully your using a closed ground loop.

interesting how you are keeping even in winter only with natural convection the air that cool. And more interesting how that works in summer. The building size is a factor and the region as well. I know farms in Iceland, but that isn't smart as everybody knows. We designed a solution for maximum mobility, easy to roll out and possible to be placed everywhere at places with cheap energy.



Moderator's note: This post was edited by frodocooper to remove a nested quote.


Title: Re: [NEWS] Antminer S9 CUSTOM FIRMWARE!
Post by: star_anise on April 23, 2018, 07:50:54 PM
Bitmain's GitHub provides enough code to build your own bmminer, and that means enough code to hack your own bmminer.

Voltage can go as low as 7.94V or as high as 9.43V. So yes, you can undervolt, and it remains stable but not full speed.

Data points: 13.5TH S9 @ 575MHz fixed frequency and 8.4V gives me a consistent 12.05TH/s. Same hardware @ 600MHz and 8.55V gives me 12.7TH/s. These are both significant undervolts; a stock 13.5TH/s S9 at fixed frequency will take 9.00V.


Title: Re: [NEWS] Antminer S9 CUSTOM FIRMWARE!
Post by: vonRau on April 25, 2018, 04:17:00 PM
strange:

I was just testing your info: 575MHz, 840mV, 12,4 GH/s (ideal) - 12,2 GH/S (RT)

And I was testing that: 600MHz, 840mV, 12,9 GH/s (ideal) - 12,6 GH/s (RT)

Finally at 631MHz, 865mV, 13,5 GH/s (ideal) - 13,5 GH/s (RT)


Title: Re: [NEWS] Antminer S9 CUSTOM FIRMWARE!
Post by: star_anise on April 25, 2018, 05:45:47 PM
What S9 batch did you get? You said 631MHz, so auto-tune, but at what stock speed? You may just have better hardware than I do. I can only get 12.2TH/s @ 600MHz, 840mV.

I'm on North American electrical, so staying under 1440W total power is critical to me.


Title: Re: [NEWS] Antminer S9 CUSTOM FIRMWARE!
Post by: vonRau on April 25, 2018, 06:20:44 PM
I testet it on a March 2018 Batch - it is a 13,5 TH S9
No, I selectet 631MHz, as I know, that this is 13,5 TH in total. Stock speed??? There is no "stock speed", there is usually "autotune" and the controller board is checking, which avarage of frequency each hashing board (chain) with the 63 ASICS is able to perform to reach maximum 13,5 TH.
If you have read the bmminer source code, you will have recognized, that the firmware is limiting the possible hashingrate with a maximum of 13,5 TH. So any increase of defined parameter which would lead to a higher hashing rate is not possible.



Title: Re: [NEWS] Antminer S9 CUSTOM FIRMWARE!
Post by: star_anise on April 25, 2018, 07:51:27 PM
Your stock speed is 13.5TH/s. There are 14TH/s auto-tune machines out there, after all.


Title: Re: [NEWS] Antminer S9 CUSTOM FIRMWARE!
Post by: vonRau on April 25, 2018, 10:11:53 PM
so what?
even 14TH machines are running the same firmware and the results with same freq/mV are same as well .....
ASIC chips are same make, same foundry but different quality (which is a normal matter of production process).


Title: Re: [NEWS] Antminer S9 CUSTOM FIRMWARE!
Post by: HELIUM_COIN on June 03, 2018, 06:46:18 AM
@ DolleTeam, please update, I see another company selling firmware online now BTW.
Any firmware for the s9i or t9+? 
Thanks, he's the site I am seeing from a youtube link.

https://goprasoft.de


Title: Re: [NEWS] Antminer S9 CUSTOM FIRMWARE!
Post by: mindtrip on June 07, 2018, 05:17:25 PM
are you willing to provide a vouch copy for review? I would review and post my experiences here on the forum


Title: Re: [NEWS] Antminer S9 CUSTOM FIRMWARE!
Post by: vonRau on June 07, 2018, 05:19:38 PM
no, it is not for free and it is not "custom firmware" - so no open source. sorry


Title: Re: [NEWS] Antminer S9 CUSTOM FIRMWARE!
Post by: mindtrip on June 07, 2018, 06:13:10 PM
I only suggest it as a newbie here to have a forum member test the software and do a write up about it small cost to help others feel comfortable in buying your software


Title: Re: [NEWS] Antminer S9 CUSTOM FIRMWARE!
Post by: mindtrip on June 07, 2018, 06:13:40 PM
If your not interested thats fine with me just offering as I have done it for other new forum members offering services or software


Title: Re: [NEWS] Antminer S9 CUSTOM FIRMWARE!
Post by: vonRau on June 07, 2018, 06:25:19 PM
thx, that is very kind, but my "system" is already deployed on some thousand S9 and S9i miners.
myself I am owning 2000 S9/S9i and 400 A3 - so no more proof and/or reference needed.


Title: Re: [NEWS] Antminer S9 CUSTOM FIRMWARE!
Post by: mindtrip on June 07, 2018, 09:19:52 PM
I understand its deployed but if your trying to sell it here your going to have a hard time without some good merit here. Good luck


Title: Re: [NEWS] Antminer S9 CUSTOM FIRMWARE!
Post by: vonRau on June 07, 2018, 09:40:23 PM
no need. I am happy how it is. ;)


Title: Re: [NEWS] Antminer S9 CUSTOM FIRMWARE!
Post by: vonRau on June 12, 2018, 08:45:57 AM
mail me pls @ viennacalling@me.com


Title: Re: [NEWS] Antminer S9 CUSTOM FIRMWARE!
Post by: Brewins on June 16, 2018, 10:54:20 PM
I understand its deployed but if your trying to sell it here your going to have a hard time without some good merit here. Good luck

OP, I woud love to give the firmware a try as well.

I love this picture of you Mindtrip  ;).

http://i.imgur.com/EA1i6iu.jpg (http://i.imgur.com/EA1i6iu.jpg)


Title: Re: [NEWS] Antminer S9 CUSTOM FIRMWARE!
Post by: fanatic26 on June 21, 2018, 06:46:30 PM
dolleteam was last active June 4th but has not posted since early February. Why are you guys still barking up this obviously dead tree?


Title: Re: [NEWS] Antminer S9 CUSTOM FIRMWARE!
Post by: vonRau on June 21, 2018, 06:49:05 PM
maybe dolle did not find any solution - but I solved it ;)


Title: Re: [NEWS] Antminer S9 CUSTOM FIRMWARE! [Release date: 01-07-2018 ll 12:00 +1GMT]
Post by: DolleTeam on June 29, 2018, 11:42:31 PM
The mining software will be released @ 02-07-2018 ll 12:00 +1GMT


Title: Re: Dollemizer ASICBOOST Comming! [New custom s9, s9i, t9 Firmware upgrade]
Post by: DolleTeam on July 01, 2018, 03:22:43 PM
Thank you guys for your patience!

We took a long time to make sure it all works the way we wanted and burned additional hashing boards  ;D

The 1st versions are out there and ready for use. We still keep up our work and are dedicated to implementing Asic Boost so
we can all mine just like Bitmain itself!

@darkpoe This software will work with the T9. u can either ramp it up to 13,5 Th in normal settings or use the Wattage/hash sweet spot of 600Feq/850Mv.
We have a ratio above 10gh/s per watt with that setting.

we will keep you updated (more frequently  ;) ) on our current progress.

Happy mining,

The DolleTeam.


Title: Re: Dollemizer ASICBOOST Comming! [New custom s9, s9i, t9 Firmware upgrade]
Post by: vonRau on July 01, 2018, 03:30:29 PM
how to get your software for testing?


Title: Re: Dollemizer ASICBOOST Comming! [New custom s9, s9i, t9 Firmware upgrade]
Post by: DolleTeam on July 01, 2018, 03:59:11 PM
how to get your software for testing?

Download it from the google drive link in the main post. or click on this link https://drive.google.com/file/d/1NZrfQHqfnHrAgtFYASJx7c4HUrrF--oU/view
Open Antminer.
Click Upgrade Firmware and wait.

Congratulations. You can test the software.


Title: Re: Dollemizer ASICBOOST Comming! [New custom s9, s9i, t9 Firmware upgrade]
Post by: vonRau on July 01, 2018, 04:16:49 PM
we are running in liquid cooling system - is there an option to switch off fans?


Title: Re: Dollemizer ASICBOOST Comming! [New custom s9, s9i, t9 Firmware upgrade]
Post by: vonRau on July 01, 2018, 04:33:45 PM
S9 miners March Batch and S9i miners May Batch are not accepting Basic.tar


Title: Re: Dollemizer ASICBOOST Comming! [New custom s9, s9i, t9 Firmware upgrade]
Post by: DolleTeam on July 01, 2018, 04:41:35 PM
S9 miners March Batch and S9i miners May Batch are not accepting Basic.tar

Thanks for this information.

Is the lite version running?


Title: Re: Dollemizer ASICBOOST Comming! [New custom s9, s9i, t9 Firmware upgrade]
Post by: vonRau on July 01, 2018, 04:43:01 PM
with the link only Basic is to download


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: DolleTeam on July 01, 2018, 04:47:58 PM
Dear VonRau,

Please see the updated first Post. There is a light version available.

We will look into your inquiry and create a new firmware batch,

If you could please post a screenshot of the output you get after flashing, that would improve our ability to hep you.

Kind Regards,

DolleTeam


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: vonRau on July 01, 2018, 04:54:11 PM
Incorrect firmware!!!

Code:
Content-type: text/html

<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<meta http-equiv="Content-Script-Type" content="text/javascript" />
<meta http-equiv="cache-control" content="no-cache" />
<link rel="stylesheet" type="text/css" media="screen" href="/css/cascade.css" />
<!--[if IE 6]><link rel="stylesheet" type="text/css" media="screen" href="/css/ie6.css" /><![endif]-->
<!--[if IE 7]><link rel="stylesheet" type="text/css" media="screen" href="/css/ie7.css" /><![endif]-->
<!--[if IE 8]><link rel="stylesheet" type="text/css" media="screen" href="/css/ie8.css" /><![endif]-->
<script type="text/javascript" src="/js/xhr.js"></script>
<script type="text/javascript" src="/js/jquery-1.10.2.js"></script>
<script type="text/javascript" src="/js/json2.min.js"></script>
<script>
function f_submit_reboot() {
setTimeout(function(){
window.location.href="/index.html";
}, 120000);

jQuery.ajax({
url: '/cgi-bin/reset_conf.cgi',
type: 'GET',
dataType: 'json',
timeout: 30000,
cache: false,
data: {},
success: function(data) {
},
error: function() {
}
});
}
function f_submit_goback() {
window.location.href="/upgrade.html";
}
</script>
<title>Ant Miner</title>
</head>
<body class="lang_en" onload="f_submit_reboot();">
<p class="skiplink">
<span id="skiplink1"><a href="#navigation">Skip to navigation</a></span>
<span id="skiplink2"><a href="#content">Skip to content</a></span>
</p>
<div id="menubar">
<h2 class="navigation"><a id="navigation" name="navigation">Navigation</a></h2>
<div class="clear"></div>
</div>
<div id="menubar" style="background-color: #0a2b40;">
<div class="hostinfo" style="float:left;with:500px;">
<img src="/images/antminer_logo.png" width="92" height="50" alt="" title="" border="0" />
</div>
<div class="clear"></div>
</div>
<div id="maincontainer">
<div id="tabmenu">
<div class="tabmenu1">
<ul class="tabmenu l1">
<li class="tabmenu-item-status active"><a href="/index.html">System</a></li>
<li class="tabmenu-item-system"><a href="/cgi-bin/minerConfiguration.cgi">Miner Configuration</a></li>
<li class="tabmenu-item-network"><a href="/cgi-bin/minerStatus.cgi">Miner Status</a></li>
<li class="tabmenu-item-system"><a href="/network.html">Network</a></li>
</ul>
<br style="clear:both" />
<div class="tabmenu2">
<ul class="tabmenu l2">
<li class="tabmenu-item-system"><a href="/index.html">Overview</a></li>
<li class="tabmenu-item-system"><a href="/administration.html">Administration</a></li>
<li class="tabmenu-item-admin"><a href="/monitor.html">Monitor</a></li>
<li class="tabmenu-item-packages"><a href="/kernelLog.html">Kernel Log</a></li>
<li class="tabmenu-item-startup active"><a href="/upgrade.html">Upgrade</a></li>
<li class="tabmenu-item-crontab"><a href="/reboot.html">Reboot</a></li>
</ul>
<br style="clear:both" />
</div>
</div>
</div>
<div id="maincontent">
<noscript>
<div class="errorbox">
<strong>Java Script required!</strong><br /> You must enable Java Script in your browser or LuCI will not work properly.
</div>
</noscript>
<h2><a id="content" name="content">System Upgrade Successed</a></h2>
<fieldset class="cbi-section" id="cbi_apply_bmminer_fieldset" style="display:block">
<img src="/resources/icons/loading.gif" alt="Loading" style="vertical-align:middle" />
<span id="cbi-apply-bmminer-status">Rebooting System ...<br />&nbsp;<br />(please wait for 120 seconds)</span>
</fieldset>
<div class="clear"></div>
</div>
</div>
<div class="clear"></div>
<div style="text-align: center; bottom: 0; left: 0; height: 1.5em; font-size: 80%; margin: 0; padding: 5px 0px 2px 8px; background-color: #918ca0; width: 100%;">
<font style="color:#fff;">Copyright &copy; 2013-2014, Bitmain Technologies</font>
</div>
</body>
</html>


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: DolleTeam on July 01, 2018, 05:01:56 PM
Dear VonRau,

thanks for the fast reply.

Please try to download the firmware again. It could be a download issue.

In addition to that, we will provide a version 2, and you can try that out as well.

Kind Regards,
DolleTeam


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: vonRau on July 01, 2018, 05:03:15 PM
please contact me consulting@raunegger.com


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: bitsolutions on July 01, 2018, 10:52:56 PM
Where can I find the GPL source code for this firmware?


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: DolleTeam on July 02, 2018, 01:33:25 AM
Thank you for your interest.

If you could please specify your request, that would be very helpful.


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: RadekG2 on July 02, 2018, 03:17:27 PM
I still do not understand why we should pay fee, when another FW with the same functionality is available for free?! Your FW can set only voltage and frequency, for the cost of fee, so where is the advance?

For those who want to keep it fanless I can compile their version for free also.

here is it:

https://bitcointalk.org/index.php?topic=4491904.0


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: DolleTeam on July 02, 2018, 06:05:08 PM
I still do not understand why we should pay fee, when another FW with the same functionality is available for free?! Your FW can set only voltage and frequency, for the cost of fee, so where is the advance?

For those who want to keep it fanless I can compile their version for free also.

here is it:

https://bitcointalk.org/index.php?topic=4491904.0

Hi RadekG2,

We could hide the fee in the program so no one would even notice... I'm not surprised if someone already does that.
Instead, we choose to be transparent and ask a very low fee. We just released our 1st version of the firmware which does include the important features 90% of us want.
Our focus lies on implementing Asic Boost for the masses, so not just Bitmain gets the sick hashes but we all do.
That said, we hope ppl support our mission by using our firmware and by doing so improvs there own mining efficiency as well.

Last but not least, our software is tested on multiple machines, does work as it should. And those miners with versions not compatible yet will be checked out and we will make sure they can benefit from it as well!

The Dolleteam!


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: dutchlincoln on July 02, 2018, 06:20:10 PM
only thing i worry about is temperatures....
How well are temperatures under control with asicboost?

how well can hashrate be upgraded without higher tempratures?


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: vonRau on July 02, 2018, 06:37:37 PM
the magic word is "liquid cooled"

"https://www.facebook.com/plugins/post.php?href=https%3A%2F%2Fwww.facebook.com%2Fchristian.raunegger%2Fphotos%2Fa.1579970482112859.1073741827.269892599787327%2F1579970555446185%2F%3Ftype%3D3&width=500"

we sell that system.

1x 20" Container - 250kW rated power hosts 108 miner
1x 40" Container - 810kW rated power hosts 324 miner

"https://www.facebook.com/plugins/post.php?href=https%3A%2F%2Fwww.facebook.com%2Fchristian.raunegger%2Fphotos%2Fa.269893516453902.55475.269892599787327%2F1556608344449073%2F%3Ftype%3D3&width=500"


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: dutchlincoln on July 02, 2018, 07:43:46 PM
the magic word is "liquid cooled"

"https://www.facebook.com/plugins/post.php?href=https%3A%2F%2Fwww.facebook.com%2Fchristian.raunegger%2Fphotos%2Fa.1579970482112859.1073741827.269892599787327%2F1579970555446185%2F%3Ftype%3D3&width=500"

we sell that system.

1x 20" Container - 250kW rated power hosts 108 miner
1x 40" Container - 810kW rated power hosts 324 miner

"https://www.facebook.com/plugins/post.php?href=https%3A%2F%2Fwww.facebook.com%2Fchristian.raunegger%2Fphotos%2Fa.269893516453902.55475.269892599787327%2F1556608344449073%2F%3Ftype%3D3&width=500"

Its looking very nice, but a tad unnessecerily complicated.
Why not start with smaller units?

i think there's a serious market for approx. 10-20 miners.
In winter its possible to put in a heat exchanger also, and use the heat for central heating and hot water, making ROI even better...


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: DolleTeam on July 02, 2018, 07:47:31 PM
only thing i worry about is temperatures....
How well are temperatures under control with asicboost?

how well can hashrate be upgraded without higher tempratures?

Hi Dutchlincoln,

Asicboost will adjust the way your miner calculates, nothing will be changed on volts or hertz. This way the temps will be around the same. (as far as we have seen on our testing rigs)

P.s. (srry for the dutch) Mooie koelkast met geluidsfoam! ;)

Groeten,

The Dolleteam!


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: vonRau on July 02, 2018, 07:52:14 PM
we are selling small units as well


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: dutchlincoln on July 02, 2018, 08:46:44 PM
we are selling small units as well

Highly interested. Tell me more...  ;D


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: dutchlincoln on July 02, 2018, 08:51:41 PM
Hi Dutchlincoln,

Asicboost will adjust the way your miner calculates, nothing will be changed on volts or hertz. This way the temps will be around the same. (as far as we have seen on our testing rigs)

P.s. (srry for the dutch) Mooie koelkast met geluidsfoam! ;)

Groeten,

The Dolleteam!

Thanks Dolle!
Ik post wat meer foto's als ik klaar ben, hoop eind van deze week.

PM me anders even over de mogelijkheden als je wilt, ik ben wel benieuwd eerlijk gezegd.


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: DolleTeam on July 02, 2018, 09:01:59 PM
we are selling small units as well

I Also would like to know more. If @dutchinno can join slack. So we can pick up the info as well. And would like to know more about your project as well @dutch



Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: dutchlincoln on July 03, 2018, 07:53:46 PM
What would really be nice is if you can set it the other way around: Set a max chip temp and throttle the miner up to that temp. Sun is shining? less TH. Mother-in-law visiting? 25Th! ;D ;D


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: vonRau on July 03, 2018, 08:05:21 PM
?? you checked it like that or it is your wish?


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: dutchlincoln on July 03, 2018, 08:08:29 PM
wish.


A few hours a day in summer i just cant control the temp enough yet to alway be on the safe side. Would be nice if you can set that temperature so they throttle back a bit. At evening and night when temps are lower, they can hash higher.


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: piscess16 on July 03, 2018, 09:10:29 PM
Hi Dollemizer the developer fee is "1.9%" or "9%"

and the FW can support T9+ or not ?


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: DolleTeam on July 03, 2018, 09:30:23 PM
Dear Piscess16,

the Miner will mine in the first 4 Minutes for our fee. Then it will mine for 200 Minutes on your pools and will continue from there.

This is equivalent of ~ 1.96 % of the Mining time. (4/204)

For the T9+, we haven't done testing on a T9+, the T9 is very efficient and might be comparable.

Thank you for your question,


Your
DolleMiner
Team


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: DolleTeam on July 04, 2018, 01:18:16 AM
Incorrect firmware!!!

[...]

This happens when your connection is interrupted to the miner during upload. It is recommended to be connected via LAN Cable to the network you are flashing firmware to.


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: piscess16 on July 04, 2018, 03:33:37 AM
Dear Piscess16,

the Miner will mine in the first 4 Minutes for our fee. Then it will mine for 200 Minutes on your pools and will continue from there.

This is equivalent of ~ 1.96 % of the Mining time. (4/204)

For the T9+, we haven't done testing on a T9+, the T9 is very efficient and might be comparable.

[...]

so total is 1 day around 28 min, total fee is around 2% right ?

Hi i have testing update the T9+ FW, but have the error cant to running, so your team can support the T9+ on future?

Code:
Miner Type = T9+
AsicType = 1387
real AsicNum = 18
use critical mode to search freq...
get PLUG ON=0x07003f0e
Find hashboard on Chain[1]
Find hashboard on Chain[2]
Find hashboard on Chain[3]
Find hashboard on Chain[8]
Find hashboard on Chain[9]
Find hashboard on Chain[10]
Find hashboard on Chain[11]
Find hashboard on Chain[12]
Find hashboard on Chain[13]
set_reset_allhashboard = 0x0000ffff
chain[1] PIC jump to app
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[1]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[1]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[1]!
Check chain[1] PIC fw version=0xff
chain[1] PIC need restore ...


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: DolleTeam on July 04, 2018, 11:09:12 AM
so total is 1 day around 28 min, total fee is around 2% right ? That is correct.

Hi i have testing update the T9+ FW, but have the error cant to running, so your team can support the T9+ on future?

[...]

We are right now working on that. The T9+ has a different PIC and requires a different bmminer. We will publish the tested version as soon as it is stable on our side for more than 24 hours.

DolleTeam


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: Artemis3 on July 04, 2018, 06:22:30 PM
Do you support the R4?


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: DolleTeam on July 05, 2018, 08:50:52 AM
Do you support the R4?

This software is tested on T9 and S9. We dont have a version for R4 yet.

Kind Regards,

DolleTeam


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: admidiral on July 05, 2018, 01:36:18 PM
what does lite and basic different ? fees, setting interface, etc ?


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: piscess16 on July 05, 2018, 02:40:13 PM
We are right now working on that. The T9+ has a different PIC and requires a different bmminer. We will publish the tested version as soon as it is stable on our side for more than 24 hours.

DolleTeam

So the T9+ also can overclock ? and the testing the overclock is until how many hashrate ?


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: DolleTeam on July 05, 2018, 07:45:37 PM
what does lite and basic different ? fees, setting interface, etc ?

The difference between lite and basic version are the settings, Basic will provide you with more functionality than the Lite version.

The Dolleteam.


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: DolleTeam on July 05, 2018, 07:48:12 PM
So the T9+ also can overclock ? and the testing the overclock is until how many hashrate ?

Yes, the T9 will also work with this firmware, and hash rates are similar to the S9! So the upgrade for the T9 will be bigger than the S9!

The Dolleteam.


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: piscess16 on July 06, 2018, 01:49:12 AM
Yes, the T9 will also work with this firmware, and hash rates are similar to the S9! So the upgrade for the T9 will be bigger than the S9!

The Dolleteam.

Sorry, i mean is T9 Plus 10.5t~


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: elliott123 on July 06, 2018, 12:23:06 PM
How to you revert back to stock.

I have reinstalled the bitmain firmware but the index page has still got the dollemizer logo on it.

Please Advise


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: AriesIV10 on July 06, 2018, 12:53:59 PM
How to you revert back to stock.

I have reinstalled the bitmain firmware but the index page has still got the dollemizer logo on it.

Please Advise

Can you paperclip it for 10 sec?  This should set it back to it's original settings.


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: elliott123 on July 06, 2018, 01:28:40 PM
Can you paperclip it for 10 sec?  This should set it back to it's original settings.

I tried this also but the dollemizer home screen on the miner was still there


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: W15ER69 on July 06, 2018, 02:41:48 PM
On S9 temp on chip is not working (


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: DolleTeam on July 06, 2018, 06:47:21 PM
Thanks for that information.

We will have a look into that.


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: DolleTeam on July 06, 2018, 06:50:10 PM
I tried this also but the dollemizer home screen on the miner was still there

Just clear your cache. F5 helps most of the time.


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: DolleTeam on July 06, 2018, 07:18:16 PM
I tried this also but the dollemizer home screen on the miner was still there

It would be important to know the reason for your switch back to stock clockings. If you could provide us with a short insight on why you choose the stock firmware over our product we would really appreciate that.

Kind Regards,

DolleTeam


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: DolleTeam on July 06, 2018, 09:48:11 PM
Can you paperclip it for 10 sec?  This should set it back to it's original settings.

AriesIV10,

thanks for helping out here.

Kind Regards,

DolleTeam


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: DolleTeam on July 06, 2018, 11:25:38 PM
On S9 temp on chip is not working (

Hi W15ER69,

this can happen due to an update of the pic program of your miner.

Please contact us directly through our slack channel, so we can elaborate that issue further.


Kind Regards,
DolleTeam


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: DolleTeam on July 07, 2018, 03:15:43 AM
Thanks for pointing that out,

however, under that post you will find the comments, that:

ITS NOT !
i tried installing this on some of my miners and while it shows its mining on status, it mines on other pools...
and he changed the ssh password too...

So this seems not like a very transparent software to us.

We tried it for a short period and had issues.

DolleTeam


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: pilalove on July 09, 2018, 12:49:45 PM
Dear Dolleteam,

Callcu fee:
- 13.5T, up date firm to 14T. But fee = 0.266T, so Net hash = 14T - 0.266T = 13.734T
- 14T, up date to 1.5T. Fee = 0.275T, Net hash = 14.22T.

Could you set fee about 1%, i think it is good.

Best regards,
John


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: Dodgymon on July 09, 2018, 01:42:41 PM
I tried this on an Antminer T9+ and it is not hashing.
I am getting this error "Logic Version   T9+-nopreheat"

I have flashed back to factory firmware and reset to defaults and still no luck.
Also restored from a backup and still nothing.



Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: robyzoa on July 10, 2018, 09:25:40 AM
I tried this on an Antminer T9+ and it is not hashing.
I am getting this error "Logic Version   T9+-nopreheat"

I have flashed back to factory firmware and reset to defaults and still no luck.
Also restored from a backup and still nothing.

Same here, but my T9+ is hashing at 3,5 TH/s.

Has anyone found a solution?


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: knukko on July 10, 2018, 09:46:59 AM
When will the ASICBOOST version be available? We have A LOT of S9's to run your firmware.


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: taserz on July 10, 2018, 09:45:34 PM
I tried it with T9+, and it is not hashing. Eventough I reset it and installed Bitmain firmware.

Sounds like his firmware cooked you t9+


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: rperus on July 10, 2018, 10:54:11 PM
Dear Piscess16,

the Miner will mine in the first 4 Minutes for our fee. Then it will mine for 200 Minutes on your pools and will continue from there.

This is equivalent of ~ 1.96 % of the Mining time. (4/204)

For the T9+, we haven't done testing on a T9+, the T9 is very efficient and might be comparable.

Thank you for your question,


Your
DolleMiner
Team

Hi,

I installed Dollemizer in a T9+. Unfurtenately, it did not work my hashrate is zero. I tried to uninstalled an reinstall Bitmain´s firmware, but the hashrate is still zero, it is not possible to uninstall the software. What can I do the Antminer is new, and I lost the warranty.


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: vincl on July 11, 2018, 01:01:56 PM
Hi,

I installed Dollemizer in a T9+. Unfurtenately, it did not work my hashrate is zero. I tried to uninstalled an reinstall Bitmain´s firmware, but the hashrate is still zero, it is not possible to uninstall the software. What can I do the Antminer is new, and I lost the warranty.

did you try a reset?


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: rperus on July 11, 2018, 03:00:18 PM
did you try a reset?

I tried to reset it  several times the 3 ways that Bitmain says I wait 20 minutes and upgrade to the latest version of the firmware. I don't know if I should send the whole antminre to Bitmain, ask for a control board or I can fix it.


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: Dodgymon on July 11, 2018, 03:48:18 PM
You can just buy a new control board from Bitmain. I am 99% sure you can reload the software from an SD card just like you can if you brick an L3+
I personally just ordered a new control board $60 USD + postage


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: rperus on July 11, 2018, 04:14:29 PM
You can just buy a new control board from Bitmain. I am 99% sure you can reload the software from an SD card just like you can if you brick an L3+
I personally just ordered a new control board $60 USD + postage

Thanks for the answer, I have been trying to reload the software from an SD card, but in  https://shop.bitmain.com/support.htm?pid=007201604120945219855QObfk20066C

there is no instructions on how to do it.


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: Evan on July 11, 2018, 09:19:14 PM
I do the math and it seems @1.9% I would need to get more hash then this upgrade gives for it to be profitable.


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: rz66 on July 12, 2018, 03:44:27 PM
Thanks for the answer, I have been trying to reload the software from an SD card, but in  https://shop.bitmain.com/support.htm?pid=007201604120945219855QObfk20066C

there is no instructions on how to do it.

very simply you just need to write onto the SD and insert SD into control board, these should help:

How to insert SD card into antminer (this is a D3 same thing)
https://www.youtube.com/watch?v=Tbub6Jyx974

installing firmware antminer through SD card
https://www.youtube.com/watch?v=UQhYFrJaq0E


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: rperus on July 12, 2018, 04:05:23 PM
very simply you just need to write onto the SD and insert SD into control board, these should help:

How to insert SD card into antminer (this is a D3 same thing)
https://www.youtube.com/watch?v=Tbub6Jyx974

installing firmware antminer through SD card
https://www.youtube.com/watch?v=UQhYFrJaq0E

I appreciate your answer, the problem there is no .IMG file for the T9+, or at least I do not know how to create it. Bitmain send this to me:

"Unfortunately, your requested tutorial is not available that flashing by SD card is not supported by Antminer T9+. If the issue is not resolved after attempting the other methods listed, please carefully follow these instructions to create a Repair ticket and ship the whole machine back to us: https://shop.bitmain.com/repairGuide"

Even Though they have have the files to do it (no instructions) in : https://shop.bitmain.com/support.htm?pid=007201604120945219855QObfk20066C

----
My main problem I cant send it to repair cuz I installed Dollemizer and lost the warranty, and it is too expensive to send it (almost as a new T9+)


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: DolleTeam on July 14, 2018, 08:18:42 PM
When will the ASICBOOST version be available? We have A LOT of S9's to run your firmware.

We got some T9+ miners in our possession right now and will fix a software version for that miner as well!

Keep updated with our progress and follow us @Twitter: #Dollemizer


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: m3hm3t on July 15, 2018, 05:17:22 PM
I tried your firmware but unfortunately need to be develop with more configuration options.. I didn't satisfied with this fw.. Sorry.


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: bitsolutions on July 15, 2018, 10:42:16 PM
Thank you for your interest.

If you could please specify your request, that would be very helpful.

The cgminer source code (cgminer/bmminer) is GPLv3 licensed which requires you provide the source code upon request.


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: Dodgymon on July 16, 2018, 02:07:29 AM
You can just buy a new control board from Bitmain. I am 99% sure you can reload the software from an SD card just like you can if you brick an L3+
I personally just ordered a new control board $60 USD + postage

I just tried a different control board and still the same error
"T9+_fixed450_noPreHeat_test"


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: DolleTeam on July 18, 2018, 08:43:40 AM
@dodgymon, Our software is not compatible with T9+. We are working on it.

@Evan, We also work to improve the hash rate. We keep the 1,9% fee as standard. Our team is working hard to improve the hash rate.

@rperus, You can switch back to bitmain firmware. There is a reset button. Hold it for 10 seconds. If it won't bring you back to stock firmware you also can hold the button (The one you can check wich IPaddress your antminer has) for 10 seconds.

 


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: DolleTeam on July 18, 2018, 09:02:18 AM
The cgminer source code (cgminer/bmminer) is GPLv3 licensed which requires you provide the source code upon request.

The GPLv3 states that you need to show us that you run our software and then we can send you the source code. We do not have to make the source code public.
If you would like the source code, send us that you are running our software and share your contact details.


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: rperus on July 18, 2018, 02:03:36 PM
@dodgymon, Our software is not compatible with T9+. We are working on it.

@Evan, We also work to improve the hash rate. We keep the 1,9% fee as standard. Our team is working hard to improve the hash rate.

@rperus, You can switch back to bitmain firmware. There is a reset button. Hold it for 10 seconds. If it won't bring you back to stock firmware you also can hold the button (The one you can check wich IPaddress your antminer has) for 10 seconds.

There are 3 different ways to reset it the Ip report button, the reset hole and within the software. I did those 3 methods several times, Bitmain does not support reset it from the SD card anymore.

I also tried to install Bitmain's Las firmware and my backup, but Dollemizer software is still there.

Iclear the cache of the browser, but dollemizer is still there.


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: elliott123 on July 18, 2018, 02:57:58 PM
There are 3 different ways to reset it the Ip report button, the reset hole and within the software. I did those 3 methods several times, Bitmain does not support reset it from the SD card anymore.

I also tried to install Bitmain's Las firmware and my backp up, but Dollemizer software is still there.

I also cannot get back to stock. Cant even SSH into my miner after I reinstalled the Bitmain Firmware. The standard credentials are root as user and admin as the password. Im getting Access Denied using those credentials.

Dollemizer please advise asap!


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: taserz on July 19, 2018, 12:43:49 AM
I also cannot get back to stock. Cant even SSH into my miner after I reinstalled the Bitmain Firmware. The standard credentials are root as user and admin as the password. Im getting Access Denied using those credentials.

Dollemizer please advise asap!

How do you feel you installed someones firmware that changes the ssh password so it can only mine for them now.

Try to hold down the ip button while powering it on for 5-10 seconds or until it reboots itself while powering on and that should restore factory defaults.


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: rperus on July 19, 2018, 03:00:05 AM
How do you feel you installed someones firmware that changes the ssh password so it can only mine for them now.

Try to hold down the ip button while powering it on for 5-10 seconds or until it reboots itself while powering on and that should restore factory defaults.

Hi, I have the same problem and tried that, and other 2 methods.

Please try these three methods to reset your machine: https://enforum.bitmain.com/bbs/topics/3957
Then load the firmware from this page: https://shop.bitmain.com/support.htm?pid=00720161126080548570Q2tDBXAH065D

The 4th method would be to flashing from the SD card, but bitmain no longer support it, so there is no instructions to do it to a T9+


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: Pirozhkov on July 19, 2018, 05:10:00 PM
I also cannot get back to stock. Cant even SSH into my miner after I reinstalled the Bitmain Firmware. The standard credentials are root as user and admin as the password. Im getting Access Denied using those credentials.

Dollemizer please advise asap!

Can you come in here? IP_MINER/upgrade.html
If you can try this:
1. https://file.bitmain.com/shop-bitmain/download/s9_fix_upgrade.tar.gz
2. Next upgrade - https://file.bitmain.com/shop-bitmain/download/Antminer-S9-all-201705031838-650M-user-Update2UBI-NF.tar.gz OR THIS https://file.bitmain.com/shop-file-server/firmwares/Antminer%20S9/Firmware/00720170428120943064Xx38xD7Y0683/Antminer-S9-all-201711171757-autofreq-user-Update2UBI-NF.tar.gz


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: elliott123 on July 21, 2018, 09:44:28 AM
Can you come in here? IP_MINER/upgrade.html
If you can try this:
1. https://file.bitmain.com/shop-bitmain/download/s9_fix_upgrade.tar.gz
2. Next upgrade - https://file.bitmain.com/shop-bitmain/download/Antminer-S9-all-201705031838-650M-user-Update2UBI-NF.tar.gz OR THIS https://file.bitmain.com/shop-file-server/firmwares/Antminer%20S9/Firmware/00720170428120943064Xx38xD7Y0683/Antminer-S9-all-201711171757-autofreq-user-Update2UBI-NF.tar.gz

Thanks I have managed to SSH back into my miner


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: coinhicken on July 23, 2018, 04:33:59 PM
So the fee is totally out of balance on this firmware. I have been running for 21 hours and these are my results.

748 shares mined to my pools.

1394 shares mined to dev fee pools.

That's more like a 150% fee...

I mean I can manually remove the dev fee pool using the cgminer api and it works fine. But I don't mind the dev fee if its as advertised.

Are there fixes coming for this?


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: taserz on July 24, 2018, 01:04:54 AM
So the fee is totally out of balance on this firmware. I have been running for 21 hours and these are my results.

748 shares mined to my pools.

1394 shares mined to dev fee pools.

That's more like a 150% fee...

I mean I can manually remove the dev fee pool using the cgminer api and it works fine. But I don't mind the dev fee if its as advertised.

Are there fixes coming for this?

Did you not read the thread. They take most of your hashing power and they changed your ssh password.


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: coinhicken on July 24, 2018, 03:02:39 AM
Did you not read the thread. They take most of your hashing power and they changed your ssh password.

I actually installed the firmware on a few different machines and never has the ssh password get changed. I'm not sure what the point would even be for them to change the ssh password... its a piece of cake to change back to stock. My guess is if people are getting the ssh password changed it was a bug.

I'm more concerned about the methodology for pool swapping to mine the dev fee.


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: taserz on July 24, 2018, 06:32:21 AM
I actually installed the firmware on a few different machines and never has the ssh password get changed. I'm not sure what the point would even be for them to change the ssh password... its a piece of cake to change back to stock. My guess is if people are getting the ssh password changed it was a bug.

I'm more concerned about the methodology for pool swapping to mine the dev fee.

Just use my firmware no dev fee and it does the exact same thing.


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: coinhicken on July 24, 2018, 02:57:03 PM
Just use my firmware no dev fee and it does the exact same thing.

I probably should. But yours is not a true firmware unless I missed something. It's simply a miner replacement. I will have to write my own management script to modify my little 7 machine farm. It's not a huge deal I just don't have tons of time to work on it at the moment.


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: zacocity on July 25, 2018, 03:29:02 PM
@coinhicken
What things do you need in the firmware?


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: coinhicken on July 25, 2018, 09:02:21 PM
@coinhicken
What things do you need in the firmware?

Good question. Mostly I would like to lower my power usage and heat a little bit. And the auto balance stuff is nice for that. Yes, I can do that all manually but Its a lot of work to do manually. And If I'm going to do that I might as well compile my own firmware from the bitmain source.

Also, anything that locks down the ssh account is a big no. Since I have a remote management system that I wrote that uses ssh to change config and check stats.


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: taserz on July 26, 2018, 02:06:57 AM
I probably should. But yours is not a true firmware unless I missed something. It's simply a miner replacement. I will have to write my own management script to modify my little 7 machine farm. It's not a huge deal I just don't have tons of time to work on it at the moment.

It will take you less than 10 minutes to do it to 7 machines. I am working on making it flashable but I rather make it better before making it flashable. Currently mine does everything this one does and more with no dev fee. Hell if there was to be a feed it would be so much smaller than this dude hijacking everyone's machines.

Also this guys firmware is only a modification of bmminer and your ssh password I took a look ;)


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: x3aklili on July 26, 2018, 04:16:20 PM
my T9+ is dead because of your wrong firmware also i revert back to original bitmain firmware but fails .

no any reset method work.

now what should i do ?



Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: tim-bc on July 26, 2018, 05:31:39 PM
my T9+ is dead because of your wrong firmware also i revert back to original bitmain firmware but fails .

no any reset method work.

now what should i do ?

If you are still covered by the Bitmain warranty you might be able to get a new one


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: x3aklili on July 26, 2018, 09:32:57 PM
your FW has been compleated killed my 2 boards!  i just bought my T9+ 3 days ago.

now i don't know how i can kill you Dollemizer as you killed my machine.

Code:
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-gb190cb0-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #57 SMP PREEMPT Fri Dec 9 14:49:22 CST 2016
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 27800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 258048
[    0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map e6fd8000
[    0.000000]   Normal zone: 1520 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 194560 pages, LIFO batch:31
[    0.000000]   HighMem zone: 496 pages used for memmap
[    0.000000]   HighMem zone: 63488 pages, LIFO batch:15
[    0.000000] PERCPU: Embedded 8 pages/cpu @e6fc0000 s9088 r8192 d15488 u32768
[    0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 256528
[    0.000000] Kernel command line: noinitrd mem=1008M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 884148K/1032192K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 148044K reserved, 253952K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06d1374   (6949 kB)
[    0.000000]       .init : 0xc06d2000 - 0xc0705380   ( 205 kB)
[    0.000000]       .data : 0xc0706000 - 0xc074cf78   ( 284 kB)
[    0.000000]        .bss : 0xc074cf84 - 0xc078d9fc   ( 259 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to f0004000
[    0.000000] zynq_clock_init: clkc starts at f0004100
[    0.000000] Zynq clock init
[    0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000303] ps7-ttc #0 at f0006000, irq=43
[    0.000614] Console: colour dummy device 80x30
[    0.000651] Calibrating delay loop... 1332.01 BogoMIPS (lpj=6660096)
[    0.090248] pid_max: default: 32768 minimum: 301
[    0.090472] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.090494] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.092634] CPU: Testing write buffer coherency: ok
[    0.092981] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.093040] Setting up static identity map for 0x4c4af8 - 0x4c4b50
[    0.093266] L310 cache controller enabled
[    0.093286] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.171030] CPU1: Booted secondary processor
[    0.260224] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.260357] Brought up 2 CPUs
[    0.260377] SMP: Total of 2 processors activated.
[    0.260385] CPU: All CPU(s) started in SVC mode.
[    0.261034] devtmpfs: initialized
[    0.263442] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.264647] regulator-dummy: no parameters
[    0.271918] NET: Registered protocol family 16
[    0.274179] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.276445] cpuidle: using governor ladder
[    0.276458] cpuidle: using governor menu
[    0.283839] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.285351] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.285365] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.285480] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xf0080000
[    0.307462] bio: create slab <bio-0> at 0
[    0.308864] vgaarb: loaded
[    0.309560] SCSI subsystem initialized
[    0.310762] usbcore: registered new interface driver usbfs
[    0.310935] usbcore: registered new interface driver hub
[    0.311200] usbcore: registered new device driver usb
[    0.312005] media: Linux media interface: v0.10
[    0.312159] Linux video capture interface: v2.00
[    0.312395] pps_core: LinuxPPS API ver. 1 registered
[    0.312406] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.312527] PTP clock support registered
[    0.312890] EDAC MC: Ver: 3.0.0
[    0.313912] Advanced Linux Sound Architecture Driver Initialized.
[    0.316740] DMA-API: preallocated 4096 debug entries
[    0.316754] DMA-API: debugging enabled by kernel config
[    0.316840] Switched to clocksource arm_global_timer
[    0.336826] NET: Registered protocol family 2
[    0.337796] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.337891] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.338050] TCP: Hash tables configured (established 8192 bind 8192)
[    0.338110] TCP: reno registered
[    0.338129] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.338181] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.338453] NET: Registered protocol family 1
[    0.338818] RPC: Registered named UNIX socket transport module.
[    0.338831] RPC: Registered udp transport module.
[    0.338839] RPC: Registered tcp transport module.
[    0.338848] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.338861] PCI: CLS 0 bytes, default 64
[    0.339302] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.341323] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.342719] bounce pool size: 64 pages
[    0.343629] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.343839] msgmni has been set to 1486
[    0.344616] io scheduler noop registered
[    0.344629] io scheduler deadline registered
[    0.344667] io scheduler cfq registered (default)
[    0.356803] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.356823] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.480746] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    1.053349] console [ttyPS0] enabled
[    1.057627] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to f0068000
[    1.065237] [drm] Initialized drm 1.1.0 20060810
[    1.082158] brd: module loaded
[    1.091508] loop: module loaded
[    1.100928] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.106680] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.114592] libphy: XEMACPS mii bus: probed
[    1.119146] ------------- phy_id = 0x3625e62
[    1.123882] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.132633] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.139296] ehci-pci: EHCI PCI platform driver
[    1.146508] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.153338] usbcore: registered new interface driver usb-storage
[    1.160201] mousedev: PS/2 mouse device common for all mice
[    1.166292] i2c /dev entries driver
[    1.173241] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.178782] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.184654] Xilinx Zynq CpuIdle Driver started
[    1.189555] sdhci: Secure Digital Host Controller Interface driver
[    1.195649] sdhci: Copyright(c) Pierre Ossman
[    1.200016] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.206796] mmc0: no vqmmc regulator found
[    1.210885] mmc0: no vmmc regulator found
[    1.246857] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.255551] usbcore: registered new interface driver usbhid
[    1.261059] usbhid: USB HID core driver
[    1.265766] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.272065] nand: Micron MT29F2G08ABAEAWP
[    1.276029] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.281981] Bad block table found at page 131008, version 0x01
[    1.288209] Bad block table found at page 130944, version 0x01
[    1.294258] 3 ofpart partitions found on MTD device pl353-nand
[    1.300044] Creating 3 MTD partitions on "pl353-nand":
[    1.305129] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.313173] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.320491] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.329416] TCP: cubic registered
[    1.332650] NET: Registered protocol family 17
[    1.337362] Registering SWP/SWPB emulation handler
[    1.343301] regulator-dummy: disabling
[    1.347663] UBI: attaching mtd1 to ubi0
[    1.734313] UBI: scanning is finished
[    1.746150] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.753230] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.759993] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.766656] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.773535] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.779515] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.786622] UBI: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 862493722
[    1.795578] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.804796] UBI: background thread "ubi_bgt0d" started, PID 1080
[    1.804801] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.808779] ALSA device list:
[    1.808782]   No soundcards found.
[    1.825634] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[    1.957626] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    1.963558] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    1.972689] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    1.982574] UBIFS: reserved for root: 0 bytes (0 KiB)
[    1.987613] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 2A24A8E1-2021-4A54-8A4E-D8E294AE00E5, small LPT model
[    2.027697] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.079822] devtmpfs: mounted
[    2.082930] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[    3.229537] random: dd urandom read with 0 bits of entropy available
[    3.856877]
[    3.856877] bcm54xx_config_init
[    4.466873]
[    4.466873] bcm54xx_config_init
[    8.467697] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[    8.473784] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[   23.648077] In axi fpga driver!
[   23.651144] request_mem_region OK!
[   23.654536] AXI fpga dev virtual address is 0xf01fe000
[   23.659675] *base_vir_addr = 0xc510
[   23.674414] In fpga mem driver!
[   23.677707] request_mem_region OK!
[   23.681220] fpga mem virtual address is 0xf3000000
[   24.456883]
[   24.456883] bcm54xx_config_init
[   25.086884]
[   25.086884] bcm54xx_config_init
[   29.087735] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[   29.093750] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 1070.665169] random: nonblocking pool is initialized
This is XILINX board. Totalram:       1039794176
Detect 1GB control board of XILINX
DETECT HW version=8000c510
miner ID : 815255ce2c008814
Miner Type = T9+
AsicType = 1387
real AsicNum = 18
use critical mode to search freq...
get PLUG ON=0x07003f0e
Find hashboard on Chain[1]
Find hashboard on Chain[2]
Find hashboard on Chain[3]
Find hashboard on Chain[8]
Find hashboard on Chain[9]
Find hashboard on Chain[10]
Find hashboard on Chain[11]
Find hashboard on Chain[12]
Find hashboard on Chain[13]
set_reset_allhashboard = 0x0000ffff
chain[1] PIC jump to app
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[1]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[1]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[1]!
Check chain[1] PIC fw version=0xff
chain[2] PIC jump to app
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[2]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[2]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[2]!
Check chain[2] PIC fw version=0xff
chain[3] PIC jump to app
Check chain[3] PIC fw version=0x90
Chain[1] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
chain[1]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
has freq in PIC, will disable freq setting.
chain[1] has freq in PIC and will jump over...
Chain[1] has core num in PIC
Chain[2] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
chain[2]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
has freq in PIC, will disable freq setting.
chain[2] has freq in PIC and will jump over...
Chain[2] has core num in PIC
Chain[3] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
chain[3]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
has freq in PIC, will disable freq setting.
chain[3] has freq in PIC and will jump over...
Chain[3] has core num in PIC
has freq in PIC, will disable freq setting.
chain[8] has freq in PIC and will jump over...
Chain[8] has core num in PIC
has freq in PIC, will disable freq setting.
chain[9] has freq in PIC and will jump over...
Chain[9] has core num in PIC
has freq in PIC, will disable freq setting.
chain[10] has freq in PIC and will jump over...
Chain[10] has core num in PIC
has freq in PIC, will disable freq setting.
chain[11] has freq in PIC and will jump over...
Chain[11] has core num in PIC
has freq in PIC, will disable freq setting.
chain[12] has freq in PIC and will jump over...
Chain[12] has core num in PIC
has freq in PIC, will disable freq setting.
chain[13] has freq in PIC and will jump over...
Chain[13] has core num in PIC
get PIC voltage=11 on chain[1], value=870
get PIC voltage=11 on chain[2], value=870
get PIC voltage=11 on chain[3], value=870
get PIC voltage=11 on chain[8], value=870
get PIC voltage=11 on chain[9], value=870
get PIC voltage=11 on chain[10], value=870
get PIC voltage=11 on chain[11], value=870
get PIC voltage=11 on chain[12], value=870
get PIC voltage=11 on chain[13], value=870
dsPIC33EP16GS202_pic_heart_beat failed on Chain[1]!
dsPIC33EP16GS202_pic_heart_beat failed on Chain[1]!
dsPIC33EP16GS202_pic_heart_beat failed on Chain[1]!
dsPIC33EP16GS202_pic_heart_beat failed on Chain[2]!
dsPIC33EP16GS202_pic_heart_beat failed on Chain[2]!
dsPIC33EP16GS202_pic_heart_beat failed on Chain[2]!
set_reset_allhashboard = 0x00000000
chain[8] temp offset record: 1,0,0,0,0,0,37,28
chain[8] temp chip I2C addr=0x98
chain[8] has no middle temp, use special fix mode.
chain[10] temp offset record: 1,0,0,0,0,0,37,28
chain[10] temp chip I2C addr=0x98
chain[10] has no middle temp, use special fix mode.
chain[12] temp offset record: 1,0,0,0,0,0,37,28
chain[12] temp chip I2C addr=0x98
chain[12] has no middle temp, use special fix mode.
dsPIC33EP16GS202_pic_heart_beat failed on Chain[1]!
dsPIC33EP16GS202_pic_heart_beat failed on Chain[1]!
dsPIC33EP16GS202_pic_heart_beat failed on Chain[1]!
dsPIC33EP16GS202_pic_heart_beat failed on Chain[2]!
dsPIC33EP16GS202_pic_heart_beat failed on Chain[2]!
dsPIC33EP16GS202_pic_heart_beat failed on Chain[2]!
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL

--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
search freq for 1 times, completed chain = 9, total chain num = 9
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1723 root       0:00 grep bmminer

bmminer not found, restart bmminer ...
This is user mode for mining
Detect 1GB control board of XILINX
Miner Type = T9+
Miner compile time: Fri Nov 24 23:19:16 EST 2017 type: Antminer T9+set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 815255ce2c008814
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[5] speed=6120
get fan[2] speed=4440
get fan[5] speed=6120
get fan[2] speed=4440
get fan[5] speed=6120
chain[1] PIC jump to app
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[1]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[1]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[1]!
Check chain[1] PIC fw version=0xff
Chain[1] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
chain[1]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
Chain[J2] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J2] test patten OK temp=-1
chain[2] PIC jump to app
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[2]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[2]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[2]!
Check chain[2] PIC fw version=0xff
Chain[2] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
chain[2]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
Chain[J3] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J3] test patten OK temp=-1
chain[3] PIC jump to app
Check chain[3] PIC fw version=0x90
Chain[3] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
chain[3]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
Chain[J4] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J4] test patten OK temp=-1
Chain[J9] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J9] test patten OK temp=-1
Chain[J10] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J10] test patten OK temp=-1
Chain[J11] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J11] test patten OK temp=-1
Chain[J12] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J12] test patten OK temp=-1
Chain[J13] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J13] test patten OK temp=-1
Chain[J14] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J14] test patten OK temp=-1
Chain[J2] will use voltage=930 [1] to open core
set_Voltage_S9_plus_plus_BM1387_54 failed on Chain[1]!

set_Voltage_S9_plus_plus_BM1387_54 failed on Chain[1]!

set_Voltage_S9_plus_plus_BM1387_54 failed on Chain[1]!

Chain[J3] will use voltage=930 [1] to open core
set_Voltage_S9_plus_plus_BM1387_54 failed on Chain[2]!

set_Voltage_S9_plus_plus_BM1387_54 failed on Chain[2]!

set_Voltage_S9_plus_plus_BM1387_54 failed on Chain[2]!

Chain[J4] will use voltage=930 [1] to open core
Chain[J9] will use voltage=930 [1] to open core
Chain[J10] will use voltage=930 [1] to open core
Chain[J11] will use voltage=930 [1] to open core
Chain[J12] will use voltage=930 [1] to open core
Chain[J13] will use voltage=930 [1] to open core
Chain[J14] will use voltage=930 [1] to open core
Chain[J2] orignal chain_voltage_pic=11 value=870
Chain[J3] orignal chain_voltage_pic=11 value=870
Chain[J4] orignal chain_voltage_pic=11 value=870
Chain[J9] orignal chain_voltage_pic=11 value=870
Chain[J10] orignal chain_voltage_pic=11 value=870
Chain[J11] orignal chain_voltage_pic=11 value=870
Chain[J12] orignal chain_voltage_pic=11 value=870
Chain[J13] orignal chain_voltage_pic=1 value=930
Chain[J13] will use backup chain_voltage_pic=870 [11]
Chain[J13] get working chain_voltage_pic=11
Chain[J14] orignal chain_voltage_pic=1 value=930
Chain[J14] will use backup chain_voltage_pic=870 [11]
Chain[J14] get working chain_voltage_pic=11
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
T9+ try get asic num for the 1 time
Chain[J2] has 0 asic
set_reset_allhashboard = 0x0000ffff
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
set_reset_allhashboard = 0x00000000
T9+ try get asic num for the 2 time
Chain[J2] has 0 asic
set_reset_allhashboard = 0x0000ffff
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
set_reset_allhashboard = 0x00000000
T9+ try get asic num for the 3 time
Chain[J2] has 0 asic
set_reset_allhashboard = 0x0000ffff
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
set_reset_allhashboard = 0x00000000
T9+ try get asic num for the 4 time
Chain[J2] has 0 asic
set_reset_allhashboard = 0x0000ffff
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
set_reset_allhashboard = 0x00000000
T9+ try get asic num for the 5 time
Chain[J2] has 0 asic
set_reset_allhashboard = 0x0000ffff
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
set_reset_allhashboard = 0x00000000
T9+ try get asic num for the 6 time
Chain[J2] has 0 asic
Chain[J4] has core num in PIC
Chain[J13] has core num in PIC
Chain[J14] has core num in PIC
miner total rate=3539GH/s fixed rate=3500GH/s
read PIC voltage=930 on chain[3]
Chain:3 chipnum=18
Chain[J4] voltage added=0.0V
Chain:3 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:3 max freq=575
Chain:3 min freq=575

read PIC voltage=930 on chain[12]
Chain:12 chipnum=18
Chain[J13] voltage added=0.0V
Chain:12 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:12 max freq=575
Chain:12 min freq=575

read PIC voltage=930 on chain[13]
Chain:13 chipnum=18
Chain[J14] voltage added=0.0V
Chain:13 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:13 max freq=575
Chain:13 min freq=575


Miner fix freq ...
read PIC voltage=930 on chain[3]
Chain:3 chipnum=18
Chain[J4] voltage added=0.0V
Chain:3 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:3 max freq=575
Chain:3 min freq=575

read PIC voltage=930 on chain[12]
Chain:12 chipnum=18
Chain[J13] voltage added=0.0V
Chain:12 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:12 max freq=575
Chain:12 min freq=575

read PIC voltage=930 on chain[13]
Chain:13 chipnum=18
Chain[J14] voltage added=0.0V
Chain:13 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:13 max freq=575
Chain:13 min freq=575

max freq = 575
set baud=1
Chain[J13] PIC temp offset=1,0,0,0,0,0,37,28
chain[12] temp chip I2C addr=0x98
chain[12] has no middle temp, use special fix mode.
Chain[J13] chip[0] use PIC middle temp offset=0 typeID=55
New offset Chain[12] chip[0] local:30 remote:34 offset:26
Chain[J13] chip[0] get middle temp offset=26 typeID=55
open core on chain[3] [12] [13]...
set voltage=870 on chain[3], the real voltage=870
Chain[J4] set working voltage=870 [11]
setStartTimePoint total_tv_start_sys=322 total_tv_end_sys=323
restartNum = 2 , auto-reinit enabled...
do read_temp_func once...
do check_asic_reg 0x08

get RT hashrate from Chain[3]: (asic index start from 1-18)
Asic[01]=61.0690 Asic[02]=66.2360 Asic[03]=67.0240 Asic[04]=61.4040 Asic[05]=65.1960 Asic[06]=66.6890 Asic[07]=64.3400 Asic[08]=62.3440
Asic[09]=62.7300 Asic[10]=65.0110 Asic[11]=65.3300 Asic[12]=64.4410 Asic[13]=66.4880 Asic[14]=62.2930 Asic[15]=64.9610 Asic[16]=66.9570
Asic[17]=71.0850 Asic[18]=69.2560

get RT hashrate from Chain[12]: (asic index start from 1-18)
Asic[01]=70.2620 Asic[02]=68.5680 Asic[03]=70.3460 Asic[04]=63.3000 Asic[05]=63.7860 Asic[06]=67.6450 Asic[07]=66.7060 Asic[08]=65.3970
Asic[09]=69.8770 Asic[10]=59.9110 Asic[11]=69.7420 Asic[12]=67.3260 Asic[13]=59.8440 Asic[14]=62.6460 Asic[15]=68.0980 Asic[16]=67.0920
Asic[17]=65.2800 Asic[18]=64.3070

get RT hashrate from Chain[13]: (asic index start from 1-18)
Asic[01]=64.3570 Asic[02]=66.5710 Asic[03]=69.9770 Asic[04]=66.9910 Asic[05]=70.0280 Asic[06]=66.1520 Asic[07]=67.5450 Asic[08]=61.0520
Asic[09]=63.3670 Asic[10]=68.5850 Asic[11]=62.8640 Asic[12]=69.1220 Asic[13]=60.5990 Asic[14]=63.4510 Asic[15]=63.5010 Asic[16]=67.4440
Asic[17]=63.7530 Asic[18]=67.3600
Check Chain[J4] ASIC RT error: (asic index start from 1-18)
Check Chain[J13] ASIC RT error: (asic index start from 1-18)
Check Chain[J14] ASIC RT error: (asic index start from 1-18)
Done check_asic_reg
do read temp on Chain[12]
Chain[12] Chip[1] TempTypeID=55 middle offset=26
Chain[12] Chip[1] local Temp=69
Chain[12] Chip[1] middle Temp=83
Special fix Chain[12] Chip[1] middle Temp = 84
Done read temp on Chain[12]
set FAN speed according to: temp_highest=69 temp_top1[PWM_T]=69 temp_top1[TEMP_POS_LOCAL]=69 temp_change=1 fix_fan_steps=0
FAN PWM: 86
read_temp_func Done!
CRC error counter=24078

here half of my miner is S9 plus

and half of it is t9+

after i reverted back to original t9+ bitmain firmware. it seems you put something on firmware like hardware lock to prevent made change on your fucking scam Firmware. and by now my machine have only 3.5Th/s

and it seems my 2 boards was burned because of your missed up !
all 4 ways reset has been fails

warranty has been void and who will be responsible?


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: xxcsu on July 27, 2018, 12:23:49 AM

You should read the whole topic before installing some junk firmware on your miner !

warranty has been void and who will be responsible?

I know its not helping you at all, but :
The answer to your question is : ONLY YOU !



Title: Re: [NEWS] Antminer S9 CUSTOM FIRMWARE!
Post by: tim-bc on July 29, 2018, 03:07:18 PM
@DarkPoe, I do not think it will work on the T9.
Incorrect firmware!!!
I still do not understand why we should pay fee, when another FW with the same functionality is available for free?! Your FW can set only voltage and frequency, for the cost of fee, so where is the advance?
and the FW can support T9+ or not ?
For the T9+, we haven't done testing on a T9+
Hi i have testing update the T9+ FW, but have the error cant to running
How to you revert back to stock. I have reinstalled the bitmain firmware but the index page has still got the dollemizer logo on it.
I tried this on an Antminer T9+ and it is not hashing.
I am getting this error "Logic Version   T9+-nopreheat"

I have flashed back to factory firmware and reset to defaults and still no luck.
Also restored from a backup and still nothing.
I tried it with T9+, and it is not hashing. Eventough I reset it and installed Bitmain firmware.
Sounds like his firmware cooked you t9+
I installed Dollemizer in a T9+. Unfurtenately, it did not work my hashrate is zero. I tried to uninstalled an reinstall Bitmain´s firmware, but the hashrate is still zero, it is not possible to uninstall the software. What can I do the Antminer is new, and I lost the warranty.
The cgminer source code (cgminer/bmminer) is GPLv3 licensed which requires you provide the source code upon request.
You can just buy a new control board from Bitmain. I am 99% sure you can reload the software from an SD card just like you can if you brick an L3+
I personally just ordered a new control board $60 USD + postage
I just tried a different control board and still the same error
"T9+_fixed450_noPreHeat_test"
Our software is not compatible with T9+.
There are 3 different ways to reset it the Ip report button, the reset hole and within the software. I did those 3 methods several times, Bitmain does not support reset it from the SD card anymore.

I also tried to install Bitmain's Las firmware and my backup, but Dollemizer software is still there.

Iclear the cache of the browser, but dollemizer is still there.
I also cannot get back to stock. Cant even SSH into my miner after I reinstalled the Bitmain Firmware. The standard credentials are root as user and admin as the password. Im getting Access Denied using those credentials.
So the fee is totally out of balance on this firmware. I have been running for 21 hours and these are my results.

748 shares mined to my pools.

1394 shares mined to dev fee pools.

That's more like a 150% fee...

I mean I can manually remove the dev fee pool using the cgminer api and it works fine. But I don't mind the dev fee if its as advertised.

Are there fixes coming for this?
Did you not read the thread. They take most of your hashing power and they changed your ssh password.
my T9+ is dead because of your wrong firmware also i revert back to original bitmain firmware but fails . no any reset method work.
your FW has been compleated killed my 2 boards!  i just bought my T9+ 3 days ago.

now i don't know how i can kill you Dollemizer as you killed my machine.

...

after i reverted back to original t9+ bitmain firmware. it seems you put something on firmware like hardware lock to prevent made change on your fucking scam Firmware. and by now my machine have only 3.5Th/s

and it seems my 2 boards was burned because of your missed up !
all 4 ways reset has been fails

warranty has been void and who will be responsible?


Title: Re: [NEWS] Antminer S9 CUSTOM FIRMWARE!
Post by: taserz on July 29, 2018, 05:51:19 PM
Yeah a bunch of us are trying to undo what dollemizer firmware did to this guy. They label their firmwar as working on a T9+ but state the have never tested it. Amongst reviewing some of the code with darval you can't have the firmware flash for the s9 and t9 they use a different number of chips amongst other things. So far we made a bmminer if you have an unflashed dollemizer t9 that should work but really darval is this guys real hope to flash the pic.


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: thecryptoprick on July 30, 2018, 03:45:57 PM
This software comes with a small built-in fee of 1,9%.

the Miner will mine in the first 4 Minutes for our fee. Then it will mine for 200 Minutes on your pools and will continue from there.

This is equivalent of ~ 1.96 % of the Mining time. (4/204)

Um, yeah no thanks...


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: x3aklili on August 01, 2018, 01:02:39 PM
your dollemizer burn my T9+ and not release the pach to recover it. my PICs FW now get error.
i was reset it many time but it won't revert back to original bitmain Firmware.
God Damn your guys


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: numnutz2009 on August 01, 2018, 01:08:11 PM
So the fee is totally out of balance on this firmware. I have been running for 21 hours and these are my results.

748 shares mined to my pools.

1394 shares mined to dev fee pools.

That's more like a 150% fee...

I mean I can manually remove the dev fee pool using the cgminer api and it works fine. But I don't mind the dev fee if its as advertised.

Are there fixes coming for this?

to be fair ur post is misleading. the share count isnt the number u should look at. u can if the diff of each share is the same between both pools but some have a much higher diff so u cant compare one to the other.

either way i wouldnt use this firmware. folks should have known the same firmware used on s9's shouldnt be used with the t9 versions. i dont really consider this part their fault even if they said it might work with the t9 model. its well known that the models are completely different and have different power requirements and firmware configs. it sucks that it happened but take this as a chance to learn and be sure to read up on the machines ur plannin on moddin via software and hardware.

if u want to force the old firmware back onto the machine use the antminer manager app that bitmain has on their site. it seems to get around the wrong firmware error when flashing custom firmware images. just download the app and the official firmware for ur model miner and connect to it using the app. u have to import the firmware u downloaded to the apps repo but u can figure that stuff out. i have used this to force flash miners that wouldnt accept the official update so i know it works but i havent used this threads custom firmware but it should have the same result.


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: taserz on August 01, 2018, 04:11:28 PM
to be fair ur post is misleading. the share count isnt the number u should look at. u can if the diff of each share is the same between both pools but some have a much higher diff so u cant compare one to the other.

either way i wouldnt use this firmware. folks should have known the same firmware used on s9's shouldnt be used with the t9 versions. i dont really consider this part their fault even if they said it might work with the t9 model. its well known that the models are completely different and have different power requirements and firmware configs. it sucks that it happened but take this as a chance to learn and be sure to read up on the machines ur plannin on moddin via software and hardware.

if u want to force the old firmware back onto the machine use the antminer manager app that bitmain has on their site. it seems to get around the wrong firmware error when flashing custom firmware images. just download the app and the official firmware for ur model miner and connect to it using the app. u have to import the firmware u downloaded to the apps repo but u can figure that stuff out. i have used this to force flash miners that wouldnt accept the official update so i know it works but i havent used this threads custom firmware but it should have the same result.

That won't fix a hashboard pic programmed for a different miner from a malicious firmware update aka this firmware here.


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: numnutz2009 on August 01, 2018, 06:33:50 PM
That won't fix a hashboard pic programmed for a different miner from a malicious firmware update aka this firmware here.

hes sayin he cant revert to the original firmware. that can mean 2 things...either the board firmware or the controller firmware. if he is havin issues flashin the controller i provided a way around that. alot of miners wont let u go back from a modded version unless you force it and since he kinda left it open to assumption i thought i would pass that info along. he can also try flashin it to see if it also forces flashin of the board firmware too. its not like he has ne thing to lose but as it sits they dont work.

what i find confusin is 2 boards dont work for him...if the firmware did in fact kill his boards all of them would be dead not just some of them.


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: bitsolutions on August 02, 2018, 04:55:15 AM
The GPLv3 states that you need to show us that you run our software and then we can send you the source code. We do not have to make the source code public.
If you would like the source code, send us that you are running our software and share your contact details.

I've never heard of a GPLv3 requirement to run it(if there is one please point me to the specific line in the GPLv3 license), GPLv3 requirements are based on distribution of the software(ie downloading it) not running it. You can contact me via PM.
Here's proof I downloaded it:

Code:
$ shasum -a 256 Dollemizer875-USA.gz
ee4386b018901799c205788bf0fb15db21b1599e4c4bf3a0d2e6abdd1d618d7e  Dollemizer875-USA.gz


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: taserz on August 02, 2018, 08:42:43 AM
I've never heard of a GPLv3 requirement to run it(if there is one please point me to the specific line in the GPLv3 license), GPLv3 requirements are based on distribution of the software(ie downloading it) not running it. You can contact me via PM.
Here's proof I downloaded it:

Code:
$ shasum -a 256 Dollemizer875-USA.gz
ee4386b018901799c205788bf0fb15db21b1599e4c4bf3a0d2e6abdd1d618d7e  Dollemizer875-USA.gz

This is true GPL requirements are based off distribution NOT usage. Requesting source code or thread being closed.


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: nokapol on August 03, 2018, 10:29:25 AM
Low hashrate and not temperature monitoring.
http://dl4.joxi.net/drive/2018/08/03/0013/1525/910837/37/231f0acad1.png


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: fanatic26_ on August 07, 2018, 09:58:33 PM
Its been common knowledge for YEARS not to mess with bitmains firmware yet you people are bricking your units left and right for no good reason at all. Pushing these machines past the rated hash rate decreases efficiency and eats away at any extra profits you think you are squeezing out of the machine.

Just plug your miner in and run it the way it was built to run. Stop being stupid and letting greed take you down a wrong path.


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: minefarmbuy on August 07, 2018, 10:05:09 PM
Its been common knowledge for YEARS not to mess with bitmains firmware yet you people are bricking your units left and right for no good reason at all. Pushing these machines past the rated hash rate decreases efficiency and eats away at any extra profits you think you are squeezing out of the machine.

Just plug your miner in and run it the way it was built to run. Stop being stupid and letting greed take you down a wrong path.

It's weird. Sometimes the hard way is the best way to learn. Asics aren't gpu's their CPU's that will burn your house down. Enjoy.

Always love me a fanatic post though. Need people like you around. Balance in the force and what not. 


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: taserz on August 08, 2018, 02:52:56 AM
It's weird. Sometimes the hard way is the best way to learn. Asics aren't gpu's their CPU's that will burn your house down. Enjoy.

Always love me a fanatic post though. Need people like you around. Balance in the force and what not.  

Meh this is just a shit firmware. If you do it right you can keep the efficiency curve the same without blowing away your profits and profit more


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: Kossack on August 08, 2018, 10:51:01 AM
I did the same to my T9+ but the firmware wiped all 3 of my boards!

Has anyone got a PIC hex code of the T9+ hashboard for a manual reprogram using a pickit3?


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: Gabrics on August 08, 2018, 01:16:24 PM
This firmware works for me so far(S9, will try on a T9). A few questions I have:

- Do you guys have a thermal protection limit? I mean do you stop mining if chips are getting too hot? If yes at what temperature?

- According to the docs I found AsicBoost should give ~25% extra hashrate. The hashrate increase I can reproduce only coming from different frequency (on Slush). If I get this right I should see higher hashrates at stock frequency. Is this actually working?

Thanks


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: taserz on August 08, 2018, 02:44:08 PM
This firmware works for me so far(S9, will try on a T9). A few questions I have:

- Do you guys have a thermal protection limit? I mean do you stop mining if chips are getting too hot? If yes at what temperature?

- According to the docs I found AsicBoost should give ~25% extra hashrate. The hashrate increase I can reproduce only coming from different frequency (on Slush). If I get this right I should see higher hashrates at stock frequency. Is this actually working?

Thanks

It's just marketing you cant add asic boost to an S9. He just wants you to use his firmware to take a dev fee.


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: Gabrics on August 08, 2018, 07:32:48 PM
Thanks, that's what I though too. As far as I get you need AsicBoost ASIC which is not "no asic boost"/normal compatible.

Still adjustable Mhz and voltage is a nice add-on. But flat out price would be better as slush always alert when this FW switches to "self mining".


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: zacocity on August 09, 2018, 11:33:56 AM
everyone who has a broken T9+ can feel free to contact me over PM or Discord or Telegram


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: Instatic on August 15, 2018, 12:09:38 AM
is this working for S9j ?


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: vonRau on August 15, 2018, 06:29:08 AM
is this working for S9j ?

Our software is running stable on S9j


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: taserz on August 15, 2018, 10:30:59 PM
Our software is running stable on S9j

Someone posted in the discord group that it broke their S9J and they had to send it back to bitmain.


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: vonRau on August 16, 2018, 05:36:46 AM
Someone posted in the discord group that it broke their S9J and they had to send it back to bitmain.

Are you sure?
S9j??
I rather believe it was a T9+, but anyway, why should it break with our software? You exactly know, that changes in the shell can easily set back to default.
I testet it with several miner types: e.g. I flashed D3 firmware on my X3 and A3. Sure, did not work, but when flashed the original FW from Bitmain´s download website, the miner was like "new".


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: sahinkod on August 19, 2018, 03:33:54 PM
hi @DolleTeam  ı m problem

Code:
Chain[J6] PIC temp offset=62,0,0,0,0,0,35,28
Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[5] chip[244] local:8 remote:9 offset:27
Chain[J6] chip[244] get middle temp offset=27 typeID=55
Chain[J6] chip[136] use PIC middle temp offset=28 typeID=01
Warning: Chain[J6] has no temp offset in PIC! will fix it
New offset Chain[5] chip[244] local:8 remote:9 offset:27
Chain[J6] chip[244] get middle temp offset=27 typeID=55
Chain[J7] PIC temp offset=62,0,0,0,0,0,35,28
Chain[J7] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[6] chip[244] local:7 remote:8 offset:27
Chain[J7] chip[244] get middle temp offset=27 typeID=55
Chain[J7] chip[136] use PIC middle temp offset=28 typeID=00
Warning: Chain[J7] has no temp offset in PIC! will fix it
New offset Chain[6] chip[244] local:7 remote:8 offset:27
Chain[J7] chip[244] get middle temp offset=27 typeID=55
Chain[J8] PIC temp offset=62,0,0,0,0,0,35,28
Chain[J8] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[7] chip[244] local:7 remote:8 offset:27
Chain[J8] chip[244] get middle temp offset=27 typeID=55
Chain[J8] chip[136] use PIC middle temp offset=28 typeID=00
Warning: Chain[J8] has no temp offset in PIC! will fix it
New offset Chain[7] chip[244] local:7 remote:8 offset:27
Chain[J8] chip[244] get middle temp offset=27 typeID=55
Chain[J6] set working voltage=800 [245]
Chain[J7] set working voltage=800 [245]
Chain[J8] set working voltage=800 [245]
setStartTimePoint total_tv_start_sys=86 total_tv_end_sys=87
restartNum = 2 , auto-reinit enabled...
Fatal Error: Fan lost!
Fatal Error: Fan lost!
Fatal Error: Fan lost!
Fatal Error: Fan lost!
do read_temp_func once...
do check_asic_reg 0x08

get RT hashrate from Chain[5]: (asic index start from 1-63)

get RT hashrate from Chain[6]: (asic index start from 1-63)

get RT hashrate from Chain[7]: (asic index start from 1-63)
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Asic[25]=131.030000
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Asic[29]=131.030000
Asic[57]=123.966000
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Asic[26]=131.181000
Asic[51]=123.966000
Done check_asic_reg
do read temp on Chain[5]
Chain[5] Chip[62] TempTypeID=55 middle offset=27
read failed, old value: Chain[5] Chip[62] local Temp=13
read failed on Chain[5] Chip[62] middle Temp old value:16
Done read temp on Chain[5]
do read temp on Chain[6]
Chain[6] Chip[62] TempTypeID=55 middle offset=27
read failed, old value: Chain[6] Chip[62] local Temp=16
read failed on Chain[6] Chip[62] middle Temp old value:28
Done read temp on Chain[6]
do read temp on Chain[7]
Chain[7] Chip[62] TempTypeID=55 middle offset=27
read failed, old value: Chain[7] Chip[62] local Temp=11
read failed on Chain[7] Chip[62] middle Temp old value:11
Done read temp on Chain[7]
set FAN speed according to: temp_highest=28 temp_top1[PWM_T]=28 temp_top1[TEMP_POS_LOCAL]=16 temp_change=0 fix_fan_steps=0
FAN PWM: 0
read_temp_func Done!
CRC error counter=39

I'm oily cooling.My devices do not have a fan.What is the reason for not working ? Help me:) Have a nice day


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: tim-bc on August 20, 2018, 12:08:07 PM
I'm oily cooling.My devices do not have a fan.What is the reason for not working ? Help me:) Have a nice day

In the code you posted you can see the error "Fatal Error: Fan lost!" four times. So, you need to either fake the fan input with some hardware timer or recompile your firmware to not check for fans.


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: taserz on August 20, 2018, 02:50:49 PM
In the code you posted you can see the error "Fatal Error: Fan lost!" four times. So, you need to either fake the fan input with some hardware timer or recompile your firmware to not check for fans.

my s9 firmware remove fan check.


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: ragga on August 27, 2018, 09:07:47 PM
me too got the board killer firmware, and had 2 boards die, sent them back for repair, and was told they were not fixable. cost £39 to send and now they want $120 to return.
but i think it might be a pic problem, may be replace or reprograme, may look into it if i get my boards back.
Quote
(MYRIG)

Aug 16, 15:39 MDT
Hi John,

We apologize but the T9+ boards are not fixable this time. We will just ship the boards back to you. But you need to have an account to pay for the return shipping.

Please go to https://panel.myrig.com/login to register  an account. In this way we can create an invoice for you to process payment.
Then please go to Myrig.com and click on the person icon on the top right corner to log in and save your shipping address

Thank you

Quote
(MYRIG)

Aug 24, 13:59 MDT
Hello,

It will cost $120.00 to ship to this address internationally from Denver to UK please let me know if you would like us to invoice you for shipping!

Thank you


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: rfsystemshungary on September 16, 2018, 12:17:42 PM
Hi,
i have 3  S9 13,5Th, work fine your soft, actually summer mode 830mV/512MHz.
Good work,

but i have T9+ , and of course i temporarily kill him the machine.

Code:
Find hashboard on Chain[1]
Find hashboard on Chain[2]
Find hashboard on Chain[3]
Find hashboard on Chain[8]
Find hashboard on Chain[9]
Find hashboard on Chain[10]
Find hashboard on Chain[11]
Find hashboard on Chain[12]
Find hashboard on Chain[13]
set_reset_allhashboard = 0x0000ffff
chain[1] PIC jump to app
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[1]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[1]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[1]!
Check chain[1] PIC fw version=0xff
chain[1] PIC need restore ...
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[1]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[1]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[1]!
After restore: chain[1] PIC fw version=0xff
chain[1] PIC need restore ...

Please temporarily originally silence bitmain soft for T9+,
maybe 550MHz...

Thanks!

best regards

Imre
from Hungary


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: x3aklili on September 16, 2018, 08:05:23 PM
they are scam dude.


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: thierry4wd on September 19, 2018, 09:33:53 PM
Hi,
i have 3  S9 13,5Th, work fine your soft, actually summer mode 830mV/512MHz.
Good work,

but i have T9+ , and of course i temporarily kill him the machine.

[...]

Please temporarily originally silence bitmain soft for T9+,
maybe 550MHz...

Thanks!

best regards

Imre
from Hungary

Please see my post (https://bitcointalk.org/index.php?topic=5032987.0) ;)


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: Andartis on September 24, 2018, 08:50:30 AM
Is dollemizer the only firmware that allows configuring each chip individually?


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: taserz on September 24, 2018, 10:00:59 AM
Is dollemizer the only firmware that allows configuring each chip individually?

IT doesn't let you configure each chip


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: Andartis on September 24, 2018, 10:42:59 AM
IT doesn't let you configure each chip

How can I get something like this: https://youtu.be/xF2WrPiztyI?t=27


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: maxmad on September 26, 2018, 12:43:47 AM
This is another custom firmware allows to change frequency for each chip.

https://www.picclickimg.com/00/s/MTE0NlgxNjAw/z/BaQAAOSwQ2JbahZ3/$/Antminer-S9-Custom-Firmware-_57.jpg (https://www.picclickimg.com/00/s/MTE0NlgxNjAw/z/BaQAAOSwQ2JbahZ3/$/Antminer-S9-Custom-Firmware-_57.jpg)


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: taserz on September 26, 2018, 02:20:21 AM
This is another custom firmware allows to change frequency for each chip.

https://www.picclickimg.com/00/s/MTE0NlgxNjAw/z/BaQAAOSwQ2JbahZ3/$/Antminer-S9-Custom-Firmware-_57.jpg (https://www.picclickimg.com/00/s/MTE0NlgxNjAw/z/BaQAAOSwQ2JbahZ3/$/Antminer-S9-Custom-Firmware-_57.jpg)

That has a 7% dev fee...


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: maxmad on September 26, 2018, 02:25:42 PM
not sure if it's 7%....

can't find any info, thread or website for this...


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: taserz on September 26, 2018, 03:51:43 PM
not sure if it's 7%....

can't find any info, thread or website for this...

It has been discussed in this forum many times just not this thread. The dev didn't put that as a disclaimer on purpose.


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: mikeywith on September 28, 2018, 09:59:20 PM
I am not starting to test this  Dollemizer Firmware against bitmain's . setting the  frequency, same pool , same room , just about same everything on each miner.

i will put them on a test for 3 days and then compare the results of both " average temps " as well as " hash rate reported by the pool".

now unless the Dollemizer Firmware gives a better "something" then I do not see a need for someone to pay fees just for a better looking firmware.

i will report back once my results are final.


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: danielyap on October 01, 2018, 09:04:46 AM
That has a 7% dev fee...

How do we detect if there's a Dev fee or not?


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: dutchlincoln on October 02, 2018, 03:34:29 PM
does this work with T9+ as well? (10.5TH)


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: fanatic26_ on October 02, 2018, 09:03:09 PM
does this work with T9+ as well? (10.5TH)

How is it possible to read this thread and still ask a question like this?

The answer is nobody should ever use this firmware. Its trash and bricks machines, has hidden fees, and who knows what else. There are much better options out there.


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: dutchlincoln on October 03, 2018, 07:52:10 AM
How is it possible to read this thread and still ask a question like this?

The answer is nobody should ever use this firmware. Its trash and bricks machines, has hidden fees, and who knows what else. There are much better options out there.

well, maybe due the fact that this fw indeed has bricked one t9, but there are also t9's ocd as well,and it is still stated in the first post???


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: Dodgymon on October 04, 2018, 09:43:10 AM
If you bothered to read the thread it has bricked a lot more than one T9+


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: mikeywith on October 09, 2018, 08:49:13 PM
I am not starting to test this  Dollemizer Firmware against bitmain's . setting the  frequency, same pool , same room , just about same everything on each miner.

i will put them on a test for 3 days and then compare the results of both " average temps " as well as " hash rate reported by the pool".

now unless the Dollemizer Firmware gives a better "something" then I do not see a need for someone to pay fees just for a better looking firmware.

i will report back once my results are final.

so been testing  a lil more than 3 days :D. so far as for temps i see no difference, but reported hash rate is slightly better on  "Dollemizer"  , the pool shows around " 0.72 TH" more per miner.


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: mikeywith on November 07, 2018, 04:11:05 AM
the Miner will mine in the first 4 Minutes for our fee. Then it will mine for 200 Minutes on your pools and will continue from there.

This is equivalent of ~ 1.96 % of the Mining time. (4/204)

i noticed my S9 mines to your pool for much more than 4 mins. actually for 7 minutes. ! so how do you justify this?


Title: Re: Dollemizer Firmware ASICBOOST Comming! [custom s9, s9i, t9 Firmware upgrade]
Post by: dutchlincoln on November 07, 2018, 06:08:13 PM
i noticed my S9 mines to your pool for much more than 4 mins. actually for 7 minutes. ! so how do you justify this?

not....
Its just a lie.. Dev fee is a lot higher..  :D