|
Title: How to power 6 pin riser? Post by: BitcfinderNot on February 15, 2018, 02:23:22 PM I have a 6 pins riser.
From my extra CPU (Corsair RM750x) goes to cables (6(2) and a 8 pin) to the GPU (GTX 1080 ti turbo) How could I Power the riser. One cable is 8 pin(one pin seems empty). Could I put this end in the PSU and the other end 6(2) in the 6 pin riser? Many thanx for any advise. Title: Re: How to power 6 pin riser? Post by: Druiz287 on February 15, 2018, 03:32:01 PM All of my risers have the 6-pin slot soldered in the board, but they’ve come with the adapters for SATA power. I run 10 GPUs with powered risers but never more than 2 risers per SATA cable. Did yours not come with this kind of adapter?
Title: Re: How to power 6 pin riser? Post by: fanatic26 on February 15, 2018, 04:28:49 PM I run 10 GPUs with powered risers but never more than 2 risers per SATA cable. This guy is doing it right. All of the people that claim the SATA connections will melt try to run too many on a single psu chain. If you limit yourself to 2 sata riser connections per PSU cable run you will be fine. Title: Re: How to power 6 pin riser? Post by: edwardceng on February 17, 2018, 10:55:34 AM Yes, you can do your scheme, it's okay with one hole empty. or else, you can buy SATA to 6 Pins connector and use it for powering your riser. You can keep your rig safe (when you are using SATA) to keep limited SATA power likes a few comment above me.
|