|
Title: Ethernet Port has no lights, no IP Post by: DustinRW85 on March 03, 2018, 12:27:32 AM So, I've set up many Antminer S9's and curious if I have maybe a couple bad apples? 2 of my miners that arrived power up just fine, have all green lights, but the Ethernet slot does not light up and I cannot acquire an IP. I've done the troubleshooting 101, reset the miner to default, ensured the network cord works, and the port from my switch is confirmed working.
There is very limited information pertaining to this problem and curious if anyone has experienced this as well, and possibly found a resolution? Thanks in advance. Title: Re: Ethernet Port has no lights, no IP Post by: SGMPhil on March 03, 2018, 01:22:43 PM This really sounds like a cable issue - either that or the ethernet port on the miner is dead. I would try a new ethernet cable - use a new one or one that is working on another miner.
Title: Re: Ethernet Port has no lights, no IP Post by: HoleShot on March 04, 2018, 04:47:26 AM If that doesn't work, I'd swap the controller with a known working controller.
|