|
Title: Mixing different speed hardware in the same miner Post by: volosator on October 01, 2013, 07:22:08 PM I have BFL single and about 20 of ASICMiner sticks. They hash on a different machines. It turns out that one of the hosts has a hardware issue and keeps rebooting and hanging.
I mine on Slush's pool, they recently introduced that new vardiff feature (i.e. the share diff would depend on the actual hashing speed) What would happen if I move ASICMiner USB Sticks to the same machine as my Single runs on? BFGMiner will detect them all and hash, it is out of question. Is difficulty of 69 bad for USB miners - it would take hours before they solve anything? Will I get a lot of stale shares? Please advice! Title: Re: Mixing different speed hardware in the same miner Post by: volosator on October 01, 2013, 09:32:31 PM another words I'm trying to assign specific miners to a specific pool and have multiply pool connections
Title: Re: Mixing different speed hardware in the same miner Post by: ScaryHash on October 01, 2013, 10:39:17 PM I used to run my graphics card and the USB block erupters, and bfg miner or cg miner handled it just fine.
I've seen screenshots of usb erupters and bfl jalepeno machines, so if it's a decent stable machine, it should handle it just fine. That way, you can tear up the other machine and figure out what's wrong it it (reinstall operating system, whatever it takes). Saves on power bills too. Title: Re: Mixing different speed hardware in the same miner Post by: Trongersoll on October 01, 2013, 10:40:51 PM the difficulty for your USB would be determined by the sum of their total hashing power anyway. There is no problem with putting them on the same machine. Basically the difficulty is determined for each worker you have in the pool based on the worker's input. this is just to cut down on communications traffic and doesn't affect how efficiently the individual inputs run.
If it helps, just think of your BFL as having like having 15 - 20 usb miners inside it on one card. |