Print Page - Open-air cases for ASICMiner backplane and blades

Title: Open-air cases for ASICMiner backplane and blades
Post by: Spotswood on November 26, 2013, 06:20:52 AM

For Sale - Open air cases for ASICMiner backplane and blades.

As pictured, the case is $90 (plus shipping from NH, US). PayPal only.

Subtract $12.50 if you only want one support beam. Subtract $18 if you don't want the twelve metal tabs to attach fans (3x 120mm or 2x 140/200mm) to the case. +$5 for extra tall posts for stacking.

http://i715.photobucket.com/albums/ww153/Spotswood_/ASICMiner%20tray/ASICMinerTrayC-640_zpsba2adfc8.jpg (http://s715.photobucket.com/user/Spotswood_/media/ASICMiner%20tray/ASICMinerTrayC-640_zpsba2adfc8.jpg.html)

http://i715.photobucket.com/albums/ww153/Spotswood_/ASICMiner%20tray/ASICMinerTrayA-640_zpsc8c5c32f.jpg (http://s715.photobucket.com/user/Spotswood_/media/ASICMiner%20tray/ASICMinerTrayA-640_zpsc8c5c32f.jpg.html)

The top corners of the blades are secured to the case via custom plastic brackets.

Two posts with rubber bumpers help secure the PSU.

Send me an email (rchomiczewski at gmail.com) to purchase.

Title: Re: [FS] Open-air case for ASICMiner backplane and blades
Post by: xzempt on November 26, 2013, 08:21:15 AM

amazing job! ;D

Title: Re: [FS] Open-air case for ASICMiner backplane and blades
Post by: btchellas on November 26, 2013, 09:09:02 AM

One of the best i ve ever seen

What type of material have you used ?
Aluminium ?

Title: Re: [FS] Open-air case for ASICMiner backplane and blades
Post by: Spotswood on November 26, 2013, 12:52:01 PM

Quote from: btchellas on November 26, 2013, 09:09:02 AM

One of the best i ve ever seen

What type of material have you used ?
Aluminium ?

Thanks.

Yes, all aluminum. ;D

Title: Re: [FS] Open-air case for ASICMiner backplane and blades
Post by: caminilegroup on November 26, 2013, 02:40:53 PM

What all is included as far as mounting the board to the case and the blades to the tabs?

Michael

Title: Re: [FS] Open-air case for ASICMiner backplane and blades
Post by: Spotswood on November 26, 2013, 02:43:44 PM

Quote from: caminilegroup on November 26, 2013, 02:40:53 PM

What all is included as far as mounting the board to the case and the blades to the tabs?

Michael

All fasteners are included i.e. standoffs, bolts, nuts, etc.

Title: Re: [FS] Open-air case for ASICMiner backplane and blades
Post by: BryanK on November 26, 2013, 02:44:44 PM

Sent PM and email :)
Thanks

Title: Re: [FS] Open-air case for ASICMiner backplane and blades
Post by: rammy2k2 on November 26, 2013, 02:52:28 PM

looks damn nice !

Title: Re: [FS] Open-air case for ASICMiner backplane and blades
Post by: caminilegroup on November 26, 2013, 02:58:52 PM

Quote from: Spotswood on November 26, 2013, 02:43:44 PM

Quote from: caminilegroup on November 26, 2013, 02:40:53 PM

What all is included as far as mounting the board to the case and the blades to the tabs?

Michael

All fasteners are included i.e. standoffs, bolts, nuts, etc.

Cool, I sent you an email. Just forgot to ask about that. Regards to my email, I only need the blade tabs for one side. My blade only has a hole on one side for mounting. Guess they wanted to save that extra .50 :D

Title: Re: [FS] Open-air cases for ASICMiner backplane and blades
Post by: sebdude420 on November 26, 2013, 05:40:18 PM

add me to queue please. thanks.

Title: Re: [FS] Open-air cases for ASICMiner backplane and blades
Post by: hayseed on November 27, 2013, 05:40:14 PM

Im in for one.

sending pm

Title: Re: [FS] Open-air cases for ASICMiner backplane and blades
Post by: BigJon901 on November 29, 2013, 04:39:34 PM

Why are you not accepting BTC for these? ???

Title: Re: [FS] Open-air cases for ASICMiner backplane and blades
Post by: DallasMiner on November 30, 2013, 03:04:23 AM

What's the turnaround time on these? And I second the "why not take BTC" question. :)

Title: Re: [FS] Open-air cases for ASICMiner backplane and blades
Post by: ssateneth on November 30, 2013, 05:36:33 AM

I'd rather pay fiat. I don't want to be the guy that paid thousands of BTC for a pizza then a couple years later missed out on being a millionaire.

Title: Re: [ON HOLD] Open-air cases for ASICMiner backplane and blades
Post by: caminilegroup on December 12, 2013, 03:48:01 PM

Title: Re: [ON HOLD] Open-air cases for ASICMiner backplane and blades
Post by: ssateneth on December 12, 2013, 05:02:22 PM

Hmm, I wondered if you could plug fans into the asicminer blade raw terminals. I guess you can. It's unfortunate that you only have 4 blades though. Seems like a waste of an open air case :/

Title: Re: [ON HOLD] Open-air cases for ASICMiner backplane and blades
Post by: hayseed on December 14, 2013, 02:15:49 AM

Quote from: caminilegroup on December 12, 2013, 03:48:01 PM

Got mine in yesterday and it looks great. With the fans in a push pool configuration, I can actually touch the asic chip's now.

I would space the blades apart till you get more blades.

What fans were those? Link please.

I myself had planned on using the screw terminals by the PS connection to feed fans.

Title: Re: [ON HOLD] Open-air cases for ASICMiner backplane and blades
Post by: hayseed on December 14, 2013, 02:18:53 AM

I PM'ed you before and after the thread opened. Am I an the order queue?

Thanks

Title: Re: [ON HOLD] Open-air cases for ASICMiner backplane and blades
Post by: Spotswood on December 14, 2013, 03:17:46 AM

Quote from: hayseed on December 14, 2013, 02:18:53 AM

I PM'ed you before and after the thread opened. Am I an the order queue?

Thanks

Yep.

Title: Re: [ON HOLD] Open-air cases for ASICMiner backplane and blades
Post by: hayseed on December 14, 2013, 05:28:58 AM

Quote from: Spotswood on December 14, 2013, 03:17:46 AM

Quote from: hayseed on December 14, 2013, 02:18:53 AM

I PM'ed you before and after the thread opened. Am I an the order queue?

Thanks

Yep.

Thanks, Let me know when I'm up.

Title: Re: [ON HOLD] Open-air cases for ASICMiner backplane and blades
Post by: BigJon901 on December 14, 2013, 05:40:13 AM

Add me to q also.

Title: Re: [ON HOLD] Open-air cases for ASICMiner backplane and blades
Post by: caminilegroup on December 16, 2013, 03:09:08 AM

Got the fans on ebay http://www.ebay.com/itm/270964546597?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649

I was originally going to use the terminals by the power supply but had a change of heart when putting it together. The fans all together are right at 1 amp, I will probably move it to the terminals later once I get some more heat shrink tubing.

The spacing works out perfectly keeping them cool, if I don't get more blades next month I'll space them out some.

It is sad I only have 4 blades right now, you can send me a few, lol

I noticed the blade being tilted a little after I took the picture, it has been fixed.

I have to say, I love this case, all 6 fans running is nice and quiet, no more box fan keeping them cool.

Title: Re: [ON HOLD] Open-air cases for ASICMiner backplane and blades
Post by: hayseed on December 16, 2013, 04:33:52 AM

Quote from: caminilegroup on December 16, 2013, 03:09:08 AM

It is sad I only have 4 blades right now, you can send me a few, lol

Ive only 3 :-( 4th is en route and hopefully not lost in the holiday shipping rampage.

Just when I had resource's lined up for 2 more, jealous car went "cough cough".

Title: Re: [ON HOLD] Open-air cases for ASICMiner backplane and blades
Post by: caminilegroup on December 16, 2013, 04:05:11 PM

I spaced out the blades today, I'll mess with the power for the fans later.

https://lh6.googleusercontent.com/-K0ed8PEIeDs/Uq8is5RHSLI/AAAAAAAAQeo/JJnvmSv-wno/s0/IMG_0814.JPG

Bitcoin Forum

Economy => Computer hardware => Topic started by: Spotswood on November 26, 2013, 06:20:52 AM