|
Title: How to enable/activate inactive cards on Linuxcoin? Post by: nopan on August 06, 2011, 06:20:18 PM The subject is the question:
I have two cards installed in a Linuxcoin machine. The two cards are a 5850 and a 5770. The 5850 is installed in the first 16x pcie slot, the 5770 with a 100% working riser in the second (1x) pcie slot. The Mainboard is an Asus K8V-XE, Bios version is 0401. Console output: user@linuxcoin:~$ AMDOverdriveCtrl -h INF: Nr. of Adapters: 5 INF: Adapter index: 0, active, ID:8819696, ATI Radeon HD 5800 Series INF: Adapter index: 1, inact., ID:8819696, ATI Radeon HD 5800 Series INF: Adapter index: 2, inact., ID:8819696, ATI Radeon HD 5800 Series INF: Adapter index: 3, inact., ID:8819696, INF: Adapter index: 4, inact., ID:8819696, Usage: AMDOverdriveCtrl [-h] [-b] [-a] [-c <num>] [-i <num>] [profile name]... If i install the 5770 in the first pcie slot it works, then i got two adapters, index 0 as active and index 1 as inactive. I have some linux experience but no experience at all with mining bitcoins on linux or Linuxcoin. Any idea? Title: Re: How to enable/activate inactive cards on Linuxcoin? Post by: hetprint on August 09, 2011, 05:35:10 AM m also facing the same problem...
Only 1 adapter is active and others are showing as inactive adapter, active one is working fine. mother board MSI 990FXA GD - 80 3 Radeon 5850 cards 3 slots PCI-E x16, x8,x8 OS Linux Coin Headless Title: Re: How to enable/activate inactive cards on Linuxcoin? Post by: peterpiper on August 09, 2011, 11:42:15 AM Have you got a video card dongle on the cards to activate them? Or what driver version are you using?
Title: Re: How to enable/activate inactive cards on Linuxcoin? Post by: leeloulee on August 09, 2011, 07:28:51 PM Ive never used linux but my windows I have to put a dummy plug on each card
Title: Re: How to enable/activate inactive cards on Linuxcoin? Post by: troc on August 09, 2011, 08:37:58 PM Do they have enough power ?
What does an lspci show ? Dummy interfaces aren't necessary in linux. Title: Re: How to enable/activate inactive cards on Linuxcoin? Post by: pixilated8 on August 09, 2011, 08:52:25 PM I've got two 5830's.
Code: user@linuxcoin:~$ AMDOverdriveCtrl --help I can also view the cards with aticonfig Code: user@linuxcoin:~$ sudo aticonfig --lsa Are you sure the PCIe x1 slot is working properly? See http://blog.zorinaq.com/?e=42 (http://blog.zorinaq.com/?e=42) for shorting pins for presence detection (scroll down to "Down-plugging x16 Cards in x1 Connectors"). Also, try Code: sudo aticonfig --initial --adapters=all Title: Re: How to enable/activate inactive cards on Linuxcoin? Post by: hetprint on August 10, 2011, 02:16:12 AM aticonfig gives following
Code: user@linuxcoin:~$ sudo aticonfig --lsa also tried Code: sudo aticonfig --initial --adapter=all my PCI -e slots are x16, x8, x8 , x4 so I have put 3 cards in x16,x8,x8 slots. Slots x8 and x4 has the same size as x16, so 5850 cards fit directly into slots without any converter. is there anything wrong with the card alignments? Any help please ? Title: Re: How to enable/activate inactive cards on Linuxcoin? Post by: Crypt_Current on August 24, 2011, 04:21:28 PM I'm having this exact same problem with 2x 5830 in Linuxcoin...
aticonfig shows both adapters, but... AMDOverdriveCtrl shows ONLY ONE as being "active" How do I "activate" the other??????? Title: Re: How to enable/activate inactive cards on Linuxcoin? Post by: Dorkslayz on August 24, 2011, 05:26:11 PM You could switch to windows, Could it be that one is x16 and the other is x1?
Title: Re: How to enable/activate inactive cards on Linuxcoin? Post by: Crypt_Current on August 25, 2011, 05:04:17 AM You could switch to windows, Could it be that one is x16 and the other is x1? I can't switch to windows because I can't afford it right now. I just wish one of the seemingly myriad users of linuxcoin would see this thread and just reply to it already. There's obviously people that use linuxcoin that have more than one GPU working under it. A little help would be nice. Title: Re: How to enable/activate inactive cards on Linuxcoin? Post by: f6wgycbedb on September 05, 2011, 02:50:10 PM Check your xorg.conf file to see if it has set up both cards to be activated. Normally, fglrx does this automatically at boot-up, but it can get confused. This seems to happen when you add new cards, or remove old ones. Similarly when you run aticonfig --initial --adapater=all, it can also get confused.
In any case, if you still have problems, please attach your xorg.conf file. Title: Re: How to enable/activate inactive cards on Linuxcoin? Post by: ovidiusoft on September 05, 2011, 03:07:08 PM Run this in a terminal window:
Code: $ head /etc/X11/xorg.conf You should see something like this: Code: Section "ServerLayout" If so, and aticonfig --list-adapters shows both cards, then it's active, so try to start a miner on it. Title: Re: How to enable/activate inactive cards on Linuxcoin? Post by: Crypt_Current on September 05, 2011, 05:33:34 PM This problem has been solved. I just use Phoenix miner now instead of GUIminer.
I issued the AMDOverdriveCtrl -help and found that both cards were indeed active, it was just that GUIminer would not use both of them for some reason. I'm getting more MH/s with Phoenix and the phatk kernel anyway :P ;) :D |