Title: [ANN] Technobit HEX16A2 - 16 chip Avalon Gen2 board Post by: marto74 on January 26, 2014, 09:09:59 PM -----------------------------------------------------------
Title: [ANN] Technobit HEX16A2 - 16 chip Avalon Gen2 board Post by: marto74 on January 26, 2014, 10:35:27 PM Here is CGminer patch and dd-wrt cgminer build
http://technobit.eu/index.php?controller=attachment&id_attachment=30 (http://technobit.eu/index.php?controller=attachment&id_attachment=30) Windows drivers http://technobit.eu/index.php?controller=attachment&id_attachment=9 (http://technobit.eu/index.php?controller=attachment&id_attachment=9) Windows HEXminer software http://technobit.eu/index.php?controller=attachment&id_attachment=29 (http://technobit.eu/index.php?controller=attachment&id_attachment=29) Specs 16 chip board Hash rate - about 24 Gh/s overclocked 16 bit PIC controller 2 line power suply Voltage controled by command in the software/firmware USB connector molex 4 pin power connector The concept is just like our HEX16A and HEX16B , boards http://s24.postimg.org/6kkfkyc1d/angle.png (http://postimg.org/image/6kkfkyc1d/) http://s24.postimg.org/hvn39biwh/Top.png (http://postimg.org/image/hvn39biwh/) http://s17.postimg.org/4h70v52az/13_GHs.png (http://postimg.org/image/4h70v52az/) http://s17.postimg.org/hcf0hwhkb/IMG_20131110_093542.jpg (http://postimg.org/image/hcf0hwhkb/) http://s17.postimg.org/4wiao5o8b/IMG_20131110_093601.jpg (http://postimg.org/image/4wiao5o8b/) The first test board is here To be assembled and test begining of next week Will be on sale soon price about 129 EUR excluding the Gen2 Avalon chips , including heatsink and fan Title: [ANN] Technobit HEX8A1 - 6/8 chip Coincraft A1 board Post by: marto74 on January 26, 2014, 10:37:19 PM Specs
8 (6) chip board (if A1 gets too power hungry) Hash rate - about 320 (240) Gh/s overclocked in turbo mode 16 bit PIC controller 6 line power suply Voltage controled by command in the software/firmware USB connector 2 x 6 pin PCI-e power connectors http://s29.postimg.org/doxs2qp9v/front.png (http://postimg.org/image/doxs2qp9v/) http://s29.postimg.org/g4zlgl7cj/ortogonal.png (http://postimg.org/image/g4zlgl7cj/) 3 chips hashing @ 200 mhz and 25 GH/s each http://s14.postimg.org/vrm8amjb1/75_GHs_CCA1.jpg (http://postimg.org/image/vrm8amjb1/) http://s27.postimg.org/aqnb16llr/20140111_145332.jpg (http://postimg.org/image/aqnb16llr/) http://s27.postimg.org/5qput8fz3/20140111_145340.jpg (http://postimg.org/image/5qput8fz3/) http://s27.postimg.org/5gic9w1cv/20140111_145346.jpg (http://postimg.org/image/5gic9w1cv/) Here is the preliminary look of the miner with cooling http://s27.postimg.org/rxjree3qn/20140119_191324.jpg (http://postimg.org/image/rxjree3qn/) http://s27.postimg.org/mpz6gugkv/20140119_191428.jpg (http://postimg.org/image/mpz6gugkv/) http://s27.postimg.org/hora8kfov/20140119_191450.jpg (http://postimg.org/image/hora8kfov/) http://s24.postimg.org/fy6nnajk1/90_GHs_CCA1.jpg (http://postimg.org/image/fy6nnajk1/) Title: Re: Technobit products News,Updates,Support - SELF MODERATED Post by: southerngentuk on January 27, 2014, 12:33:03 AM Let all face a bit of reality. Marto please confirm that are boards have NOT been produced yet. Please confirm to the best of your knowledge when you expect production to take place. Please be honest.. Will you provide answers here, that you have ignored in your other threads. Title: Re: Technobit products News,Updates,Support - SELF MODERATED Post by: marto74 on January 27, 2014, 12:34:57 AM Let all face a bit of reality. Marto please confirm that are boards have NOT been produced yet. Please confirm to the best of your knowledge when you expect production to take place. Please be honest.. Will you provide answers here, that you have ignored in your other threads. to be shipped tommorow This is except orders got in January Title: Re: Technobit products News,Updates,Support - SELF MODERATED Post by: southerngentuk on January 27, 2014, 12:48:06 AM All left Hex16A are packed to be shipped tommorow This is except orders got in January Can you PM me a tracking number tomorrow please. I'll update this thread when i receive it. Title: Re: Technobit products News,Updates,Support - SELF MODERATED Post by: volosator on January 27, 2014, 01:33:07 AM Let all face a bit of reality. Marto please confirm that are boards have NOT been produced yet. Please confirm to the best of your knowledge when you expect production to take place. Please be honest.. Will you provide answers here, that you have ignored in your other threads. to be shipped tommorow This is except orders got in January Not acceptable. I asked for refund. I want my chips back AND bitcoins I paid you AND postage. I mailed my chips back in 2013-11-04! Now they are useless pretty much. Now, if this gets deleted - I promise to spend a bitcoin or 2 on google ads to make sure that everybody knows what technobit.eu is and how good their customer service. Title: Re: Technobit products News,Updates,Support - SELF MODERATED Post by: marto74 on January 27, 2014, 01:44:34 AM Your boards are assembled and packed.
If we try to disassemble the chips we can destroy them. And do you know when the chips were received here? And do you understand that PCB are populated in batches? SO shipment tomorrow and no refund. You can start trolling like the other one too. Best Martin P.S. I checked your order You paid only 2 EUR for packing. Your boards are about 4 kg package. Please organize your transport You have our shipping address it is a pickup too. Title: Re: Technobit products News,Updates,Support - SELF MODERATED Post by: volosator on January 27, 2014, 02:28:03 AM Nope. You had your chance. I should have received the boards by mid December 2013. I'm not putting 42Gh/s on the network @ 600W at that difficulty.
Title: Re: Technobit products News,Updates,Support - SELF MODERATED Post by: marto74 on January 27, 2014, 08:02:47 AM Nope. You had your chance. I should have received the boards by mid December 2013. I'm not putting 42Gh/s on the network @ 600W at that difficulty. Any wayYou have the address Your order is ready packed. It is up to you . NO refund in any case Title: Re: Technobit products News,Updates,Support - SELF MODERATED Post by: southerngentuk on January 27, 2014, 08:55:02 AM Nope. You had your chance. I should have received the boards by mid December 2013. I'm not putting 42Gh/s on the network @ 600W at that difficulty. Assuming that you have 6 boards and shipping is imminent I would be willing to buy your order for say 0.35 BTC on the condition that Marto can combine the shipping at minimum extra coast and in reasonable time. I know that's not what you paid but we have all lost here. With Respect SouthernGentUK Title: Technobit products News,Updates,Support - SELF MODERATED Post by: Zich on January 27, 2014, 09:32:49 AM Nice, new thread ;)
Title: Re: Technobit products News,Updates,Support - SELF MODERATED Post by: Jeffrey on January 27, 2014, 09:48:49 AM I was hoping this could be a thread with information about new products and updates on software and perhaps some guides. But too bad, it's already cluttered with people asking about existing orders.
Can't that be moved back to the thread about the actual product? Title: Re: Technobit products News,Updates,Support - SELF MODERATED Post by: southerngentuk on January 27, 2014, 09:53:41 AM I was hoping this could be a thread with information about new products and updates on software and perhaps some guides. But too bad, it's already cluttered with people asking about existing orders. Can't that be moved back to the thread about the actual product? With all due respect there is much outstanding business to be dealt with that has not been dealt with in those threads. Edit : Martin is more than welcome to remove my posts once he has provided my tracking number, to reduce the clutter in the thread. Title: Re: Technobit products News,Updates,Support - SELF MODERATED Post by: rammy2k2 on January 27, 2014, 10:40:24 AM im curious to see what marto has to say about this
Title: Re: Technobit products News,Updates,Support - SELF MODERATED Post by: jdot007 on January 27, 2014, 11:02:51 AM I was hoping this could be a thread with information about new products and updates on software and perhaps some guides. But too bad, it's already cluttered with people asking about existing orders. Can't that be moved back to the thread about the actual product? With all due respect there is much outstanding business to be dealt with that has not been dealt with in those threads. Edit : Martin is more than welcome to remove my posts once he has provided my tracking number, to reduce the clutter in the thread. EXACTLY, Marto can I pretty please have a status on my order KKCKPSKWR Title: Re: Technobit products News,Updates,Support - SELF MODERATED Post by: marto74 on January 27, 2014, 11:18:37 AM Soo
It is too much. I'm not going to refund this troll in any case.If I do then every troll that have spare time will be able to win. After a few requests the moderators keep silent. I do not have time to clear the tread every 5 minutes. For now I will just ignore. Everybody use PM for questions, sorry. Anouncments will be made on our blog in technobit.eu Best Martin Title: Re: Technobit products News,Updates,Support - SELF MODERATED Post by: alfabitcoin on January 27, 2014, 11:42:01 AM Soo Marto, trolling is one thing from no apperent reason, however some of your costomers have indeed legit claims and no other way to get issue fixed. If you continue with delay and ignore messages, then this will happen again.It is too much. I'm not going to refund this troll in any case.If I do then every troll that have spare time will be able to win. After a few requests the moderators keep silent. I do not have time to clear the tread every 5 minutes. For now I will just ignore. Everybody use PM for questions, sorry. Anouncments will be made on our blog in technobit.eu Best Martin It looks bad on you really. Remember, you have make a wrong first, did not do what you promised and ignored issues. Fix this so everybody can move one. If user has a legit reason to be upset because you ignore him, why you think hes trolling and continue to sturb the issue. I am sure that mods would remove trolling post withot backing up their claims. Its not about winning. You have obligation to your customers and that is all. You just can not say, oh, i wont issue refund becasue of numerous angry post of users who has legit reason to be upset and angry. Title: Re: [ANN] Technobit HEX16A2 - 16 chip Avalon Gen2 board Post by: marto74 on January 27, 2014, 09:21:31 PM Dear,
Troll, I hope you are well. your sending is on it's way to you. 2 pieces HEX miners tested and programmed. You order is fulfilled so please stop this. You got what you paid for. The sending is insured so in case of damaged packaging , please let us konw. Happy trolling Best Regards: Technobit. p.s. I'm just wondering how long until some moderator happens to react. Title: Re: Technobit products News,Updates,Support - SELF MODERATED Post by: marto74 on January 27, 2014, 09:23:44 PM Soo It is too much. I'm not going to refund this troll in any case. You are the Scammer, not me! Where is my money? Title: Re: [ANN] Technobit HEX16A2 - 16 chip Avalon Gen2 board Post by: ZenkoSS on January 27, 2014, 11:02:18 PM Hi Martin, Just wondering if your able to refund me for my order SIDTAPHFB 2013-11-11
Dont know if you will see this due to the major spammer Simon Title: Re: Technobit products News,Updates,Support - SELF MODERATED Post by: Gator-hex on January 27, 2014, 11:29:48 PM There are exclusions to the EU right to withdrawal!
Quote 3. Unless the parties have agreed otherwise, the consumer may not exercise the right of withdrawal provided for in paragraph 1 in respect of contracts: http://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=CELEX:31997L0007:en:NOT- for the supply of goods or services the price of which is dependent on fluctuations in the financial market which cannot be controlled by the supplier, - for the supply of goods made to the consumer's specifications or clearly personalized or which, by reason of their nature, cannot be returned or are liable to deteriorate or expire rapidly, Title: Re: [ANN] Technobit HEX16A2 - 16 chip Avalon Gen2 board Post by: Zich on January 28, 2014, 12:47:41 AM New patch for cgminer 3.11.0 + TL-MR3020 image r39404 Download (http://www.megafileupload.com/en/file/493742/0-1-8-rar.html)
or patch only b535bc08267aef90511afff23cb9ec48c4a6a704.patch (https://www.dropbox.com/s/t1rgvsvd6qxjga5/b535bc08267aef90511afff23cb9ec48c4a6a704.patch) Title: Re: [ANN] Technobit HEX16A2 - 16 chip Avalon Gen2 board Post by: sgrunger on January 28, 2014, 12:52:18 AM I have 32 HEX16A2 boards from Technobit.
What is the best and safest way to power them? I had planned that a PSU CX750 from Corsair would power 10 in my opinion, but it is clearly insufficient.. :( Title: Re: [ANN] Technobit HEX16A2 - 16 chip Avalon Gen2 board Post by: Zich on January 28, 2014, 01:16:25 AM I have 32 HEX16A2 boards from Technobit. What is the best and safest way to power them? I had planned that a PSU CX750 from Corsair would power 10 in my opinion, but it is clearly insufficient.. :( Based on CX750 spec, 12 V rail can supply 62 A. One HEX16A2 use about 9 A. So 1 unit PSU only able to supply 6 board of HEX16A2. And please noted that one modular molex power cable can only sustain 1 hex16A2. Title: Re: [ANN] Technobit HEX16A2 - 16 chip Avalon Gen2 board Post by: Zich on January 28, 2014, 03:49:50 AM TPLINK TL-MR3020 flashed with latest image that support HEX8A1
http://s3.postimg.org/utferczxf/hex8.jpg (http://postimg.org/image/72g198zq7/full/) Title: Re: [ANN] Technobit HEX16A2 - 16 chip Avalon Gen2 board Post by: loshia on January 28, 2014, 04:37:15 AM TPLINK TL-MR3020 flashed with latest image that support HEX8A1 Morning, if can you tell me reported speed with nanos?http://s3.postimg.org/utferczxf/hex8.jpg (http://postimg.org/image/72g198zq7/full/) It should be back to normal. No more dupes also the chip1 should be ok of hexa2 ;) Title: Re: [ANN] Technobit HEX16A2 - 16 chip Avalon Gen2 board Post by: Zich on January 28, 2014, 05:22:29 AM Morning, if can you tell me reported speed with nanos? It should be back to normal. No more dupes also the chip1 should be ok of hexa2 ;) Morning too loshia ;D Yes, nanos speed back to normal :D But i can not run it along with other in TL-MR3020, one nano hash rate become low after few minute. Maybe hub issue :D Yup, no more dupe & chip1 is hashing normally ;D Title: Re: [ANN] Technobit HEX16A2 - 16 chip Avalon Gen2 board Post by: loshia on January 28, 2014, 05:32:23 AM Morning, if can you tell me reported speed with nanos? It should be back to normal. No more dupes also the chip1 should be ok of hexa2 ;) Morning too loshia ;D Yes, nanos speed back to normal :D But i can not run it along with other in TL-MR3020, one nano hash rate become low after few minute. Maybe hub issue :D Yup, no more dupe & chip1 is hashing normally ;D I do have two nanos + 5 hexa on single tplink and never had an issue there Title: Re: [ANN] Technobit HEX16A2 - 16 chip Avalon Gen2 board Post by: Zich on January 28, 2014, 05:55:28 AM Morning, if can you tell me reported speed with nanos? It should be back to normal. No more dupes also the chip1 should be ok of hexa2 ;) Morning too loshia ;D Yes, nanos speed back to normal :D But i can not run it along with other in TL-MR3020, one nano hash rate become low after few minute. Maybe hub issue :D Yup, no more dupe & chip1 is hashing normally ;D I do have two nanos + 5 hexa on single tplink and never had an issue there Yeah ;) Title: Re: [ANN] Technobit HEX16A2 - 16 chip Avalon Gen2 board Post by: marto74 on January 28, 2014, 06:19:50 AM Hi Martin, Just wondering if your able to refund me for my order SIDTAPHFB 2013-11-11 HIDont know if you will see this due to the major spammer Simon I see you are outside the window. OK I'll try today best Martin Title: Re: [ANN] Technobit HEX16A2 - 16 chip Avalon Gen2 board Post by: awgilyas on January 28, 2014, 08:09:39 AM I have 32 HEX16A2 boards from Technobit. What is the best and safest way to power them? I had planned that a PSU CX750 from Corsair would power 10 in my opinion, but it is clearly insufficient.. :( Based on CX750 spec, 12 V rail can supply 62 A. One HEX16A2 use about 9 A. So 1 unit PSU only able to supply 6 board of HEX16A2. And please noted that one modular molex power cable can only sustain 1 hex16A2. 7 if they run at 92W each. But I'm pushing it atm. lol (20-21Gh/s if anyone's asking) Title: Re: [ANN] Technobit HEX16A2 - 16 chip Avalon Gen2 board Post by: Zich on January 28, 2014, 08:11:30 AM I have 32 HEX16A2 boards from Technobit. What is the best and safest way to power them? I had planned that a PSU CX750 from Corsair would power 10 in my opinion, but it is clearly insufficient.. :( Based on CX750 spec, 12 V rail can supply 62 A. One HEX16A2 use about 9 A. So 1 unit PSU only able to supply 6 board of HEX16A2. And please noted that one modular molex power cable can only sustain 1 hex16A2. 7 if they run at 92W each. Put I'm pushing it atm. lol :'( :'( :'( Title: Re: [ANN] Technobit HEX16A2 - 16 chip Avalon Gen2 board Post by: awgilyas on January 28, 2014, 09:33:09 AM Title: Re: [ANN] Technobit HEX16A2 - 16 chip Avalon Gen2 board Post by: Zich on January 28, 2014, 09:41:18 AM :o :o :o Title: Re: Technobit products News,Updates,Support - SELF MODERATED Post by: southerngentuk on January 28, 2014, 09:41:00 PM I was hoping this could be a thread with information about new products and updates on software and perhaps some guides. But too bad, it's already cluttered with people asking about existing orders. Can't that be moved back to the thread about the actual product? With all due respect there is much outstanding business to be dealt with that has not been dealt with in those threads. Edit : Martin is more than welcome to remove my posts once he has provided my tracking number, to reduce the clutter in the thread. feel free to clean. Title: Re: [ANN] Technobit HEX16A2 - 16 chip Avalon Gen2 board Post by: Jeffrey on January 29, 2014, 09:56:30 AM I've ordered and received a couple of these miners. First order was from the "week 1/2 december shipment" batch, the others were from the "december shipment" batch.
From this last batch, one of the miners is acting weird. It's connected via a molex plug to a Corsair 430CX PSU, no other devices attached to the PSU (so plenty of power I'd say). Via USB connected to a raspberry, running the patched CGminer found on the technobit site. When using the recommended settings (1500Mhz, 1.000volt) it starts hashing at 22-23GH/s but after about 2 hours the speed drops to only 6GH/s. Reconnecting the miner and starting it again gives the same behavior. I've tested some other settings, and the most stable now seems to be 1300Mhz and about 1.2 volts. With this it still drops in speed but it seems a bit more stable (it takes longer to drop). The fan is blowing and the heatsink doesn't feel extremely hot. Also tested it on another PSU but still the same behavior. Any ideas? Title: Re: [ANN] Technobit HEX16A2 - 16 chip Avalon Gen2 board Post by: Zich on January 29, 2014, 10:42:00 AM I've ordered and received a couple of these miners. First order was from the "week 1/2 december shipment" batch, the others were from the "december shipment" batch. From this last batch, one of the miners is acting weird. It's connected via a molex plug to a Corsair 430CX PSU, no other devices attached to the PSU (so plenty of power I'd say). Via USB connected to a raspberry, running the patched CGminer found on the technobit site. When using the recommended settings (1500Mhz, 1.000volt) it starts hashing at 22-23GH/s but after about 2 hours the speed drops to only 6GH/s. Reconnecting the miner and starting it again gives the same behavior. I've tested some other settings, and the most stable now seems to be 1300Mhz and about 1.2 volts. With this it still drops in speed but it seems a bit more stable (it takes longer to drop). The fan is blowing and the heatsink doesn't feel extremely hot. Also tested it on another PSU but still the same behavior. Any ideas? That sound like over setting on frequency but 1500 is still on stable range. I had similar result while trying frequency 1600 but never happen with 1500. With frequency 1500 you could give 1100mv. And You could try frequency 1400 with 1060mv. Title: Re: [ANN] Technobit HEX16A2 - 16 chip Avalon Gen2 board Post by: Jeffrey on January 29, 2014, 11:53:04 AM Thanks for the advice, I'll try those settings.
Can it have to do with cgminer or the raspberry? Title: Re: [ANN] Technobit HEX16A2 - 16 chip Avalon Gen2 board Post by: Zich on January 29, 2014, 11:54:11 AM Thanks for the advice, I'll try those settings. Can it have to do with cgminer or the raspberry? I guess no :) Title: Re: [ANN] Technobit HEX16A2 - 16 chip Avalon Gen2 board Post by: btcminer84 on January 29, 2014, 10:14:37 PM The scammer marto74 (Technobiteu) has deleted my customer account on Technobit.eu and I got nothing!
Plus I don't received the refund I asked on 2013-12-09 for. Title: Re: [ANN] Technobit HEX16A2 - 16 chip Avalon Gen2 board Post by: ZenkoSS on January 29, 2014, 11:39:32 PM HI Martin
I have PM'd you my Paypal address for you to send the refund to, for my order SIDTAPHFB 2013-11-11. Simon Title: Re: [ANN] Technobit HEX16A2 - 16 chip Avalon Gen2 board Post by: ZenkoSS on January 31, 2014, 01:08:10 PM Martin are you ever going to refund me for my order which was placed on 11th November?
SIDTAPHFB 2013-11-11 Title: Re: [ANN] Technobit HEX16A2 - 16 chip Avalon Gen2 board Post by: joeventura on January 31, 2014, 03:04:55 PM Martin are you ever going to refund me for my order which was placed on 11th November? SIDTAPHFB 2013-11-11 If you also have been scammed by this business go here and make an entry in his TRUST so that others will not be taken in by him. https://bitcointalk.org/index.php?action=trust;u=84195 |