Title: ReUse of ZTEX FPGA 1.15y Boards - profitable LTC Mining (Guide) Post by: bitcoinminer42 on January 30, 2014, 02:49:52 PM Hi Forum,
in the past I had some ZTEX FPGA Boards to mine BTC. Now i reactivated them using LTC Mining. And hey... it's profitable ;-) (approx. 64kHs/1.15y-board) Step-by-step guide for Linux systems: (<xxx> are placeholders ;-) 1. check out cgminer git clone https://github.com/ckolivas/cgminer.git 2. get version 3.1.1 git checkout v3.1.1 3. checkout FPGA Litecoin Miner git clone https://github.com/kramble/FPGA-Litecoin-Miner.git 4. copy patch to cgminer cp experimental/Ztex-1-15y/cgminer-3.1.1/* <your cgminer base path> 5. copy binary to cgminer bitstreams (override original) cp experimental/Ztex-1-15y/ztex_ufm1_15y1-ltc-v04-1core-ucf-46-fmax-46.bit <your cgminer base path>/bitstreams/ztex_ufm1_15y1.bit 6. configure cgminer ./autogen.sh CFLAGS="-O2" ./configure --enable-ztex --enable-icarus --enable-scrypt --disable-opencl 7. compile and install cgminer make sudo make install tested with ubuntu 12.04 and 2 original ZTEX 1.15y2 boards WARNING: may damage your board... (i run it since 3 days without probs...) more informations: cgminer v3.1.1: https://github.com/ckolivas/cgminer/blob/v3.1.1/README cgminer patch: https://github.com/kramble/FPGA-Litecoin-Miner/blob/master/experimental/Ztex-1-15y/cgminer-3.1.1/README.txt Title: Re: ReUse of ZTEX FPGA 1.15y Boards - profitable LTC Mining (Guide) Post by: bitcoinminer42 on January 30, 2014, 09:10:00 PM now running a bunch of ZTEX 1.15y2 boards (hopefully) without problems.
each board takes approx. 24W/64kHs edit: heatsinks remains cold. maybe i could try a fanless run :-) Title: Re: ReUse of ZTEX FPGA 1.15y Boards - profitable LTC Mining (Guide) Post by: bitcoinminer42 on February 01, 2014, 08:25:30 PM one of them will run this night without fans. tomorrow i'll see stats about hashing power and report them ;-)
Title: Re: ReUse of ZTEX FPGA 1.15y Boards - profitable LTC Mining (Guide) Post by: poohbah on February 01, 2014, 08:55:33 PM At 64kh, isn't it better to just ebay them? I'm showing a payback period of >290 days, assuming zero difficulty increases...
Title: Re: ReUse of ZTEX FPGA 1.15y Boards - profitable LTC Mining (Guide) Post by: tokyoghetto on February 01, 2014, 09:21:39 PM where can I buy these boards used?
Title: Re: ReUse of ZTEX FPGA 1.15y Boards - profitable LTC Mining (Guide) Post by: DAoneNonlyG on February 01, 2014, 09:43:37 PM where can I buy these boards used? got 5 ztex quads (1 with only 3 cores working), 19 ztex singles and 10 enterpoint cm1... located in germany... pn if intressted... Title: Re: ReUse of ZTEX FPGA 1.15y Boards - profitable LTC Mining (Guide) Post by: bitcoinminer42 on February 04, 2014, 07:42:28 PM one of them will run this night without fans. tomorrow i'll see stats about hashing power and report them ;-) running fanless without any problems nor overheating At 64kh, isn't it better to just ebay them? I'm showing a payback period of >290 days, assuming zero difficulty increases... at this time it's not profitable to sell SPARTAN-6 boards as they are more worth than people are willing to pay. if someone want to buy... PN me with your offer Title: Re: ReUse of ZTEX FPGA 1.15y Boards - profitable LTC Mining (Guide) Post by: johnfox on April 01, 2014, 03:45:23 PM Hi,
I'm trying to get this running on my ztex 1.15y fpga boards and I'm getting following invalid nonce errors: [2014-04-01 17:42:23] ZTEX 0015-01-08-3: entering poll loop [2014-04-01 17:42:23] ZTEX 0015-01-08-1: entering poll loop [2014-04-01 17:42:23] ZTEX 0015-01-08-2: checkNonce failed for 0181301E hash7 1488598D [2014-04-01 17:42:23] ZTEX 0015-01-08-2: exit 0181301E [2014-04-01 17:42:23] ZTEX 0015-01-08-4: checkNonce failed for 0180D945 hash7 52440EE0 [2014-04-01 17:42:23] ZTEX 0015-01-08-4: exit 0180D945 [2014-04-01 17:42:23] ZTEX 0015-01-08-2: entering poll loop [2014-04-01 17:42:23] ZTEX 0015-01-08-3: checkNonce failed for 0180E45E hash7 683B6788 [2014-04-01 17:42:23] ZTEX 0015-01-08-3: exit 0180E45E [2014-04-01 17:42:23] ZTEX 0015-01-08-4: entering poll loop [2014-04-01 17:42:23] ZTEX 0015-01-08-1: checkNonce failed for 0180EE33 hash7 9752A937 [2014-04-01 17:42:23] ZTEX 0015-01-08-1: exit 0180EE33 [2014-04-01 17:42:23] ZTEX 0015-01-08-3: entering poll loop [2014-04-01 17:42:23] ZTEX 0015-01-08-1: entering poll loop I have forced the frequency to 100MHz (lowest setting possible) and still getting this. Anyone have and idea where to look? thx a lot Title: Re: ReUse of ZTEX FPGA 1.15y Boards - profitable LTC Mining (Guide) Post by: gtraah on April 01, 2014, 03:50:17 PM now running a bunch of ZTEX 1.15y2 boards (hopefully) without problems. each board takes approx. 24W/64kHs edit: heatsinks remains cold. maybe i could try a fanless run :-) 64KH? hmmmm I think its more profitable to by those AUD-$45 : LTC/BTC Usb Dual miners 70KHs and it uses much less power than 24w Even that it will probably make u 2 cents a day << Just a guesstimate lol |