Bitcoin Forum

After I try to send the tokens, I get this error "(error_36) Input address is not checksummed. What does that mean?" and does not send tokens. Has anyone encountered this problem? can anyone knows the solution.

I can not create a new account since I have money on my balance that I want to withdraw

It should work, though the address you are sending it shows not checksummed. Try verifying the address of where you are going to send the tokens or verify it to the ICO may some encounter this problem that maybe is a problem with the contract.

Pro tip: If you don't know what OP is talking about, don't post nonsenses. You are not helping by shitposting here.

The wallet simply does not send the transaction to any address. When I click to generate a transaction in response, I do not get any response. What you offer does not help because I already did it does not help

Double check everything.

Take a screenshot of your "Send" page and post it here.

Have you tried to change the network from the default one(myetherwallet.com), to other networks?

I just sent the token and it worked. Double check before you send the token, address you want to send the token and set gas price. make sure everything is correct.

Man I just tried now with default settings network sending a token from my wallet to another one and everything was fine... did you solve your problem?

I look at this issue, because I have never experienced, hopefully there can be a solution.
because so far I have not and have not experienced the most because of the gas is less.

Is your account balance not showing? some users who can not generate transactions on MEW usually have that problem, MEW is working to fix this problem, the solution just need to be patient and try to generate transactions in a few moments

Read tutoring on YouTube, there are some factors why we can't send out our token to exchange or other wallet, one is that you don't have coin to gas it during transaction, second is that you have to put the right data on the box like the amount of coin and its right symbol...

Read here: (https://bitcointalk.org/index.php?topic=2291123.0)

Just try it sometime if its work. Otherwise, you may try the support and seek their help to fix your issue. I also didn't experienced this sort of problem but If I'm in your position I will try my luck again and see how it goes. Goodluck.

thanks for the help of his links, hopefully can help and clarify the circumstances that have happened, success always

I think this problem you may face due to occur any problem with your contract. Again less gas causes such issue too. Give everything a second check or use the default settings for transaction.

I would suggest you to go for some tutorials and article related to this on the internet. Probably not having sufficient coins to gas during the time of transaction may lead you to face such complexity.

I think it often happens in Myetherwallet may be maintenance but do not worry it will not be long. But if long you should not panic your coin will not disappear.

I have never experienced anything like that but with a link provided I can learn and may be useful too, hopefully it could be a settlement.

Every Ethereum address has two versions. One version has some letters as uppercase characters and the other version doesn’t.

As an example:

◾Non-checksummed version: 0xdecaf9cd2367cdbb726e904cd6397edfcae6068d
◾Checksummed version: 0xDECAF9CD2367cdbb726E904cD6397eDFcAe6068D

Even though both addresses use the same charachters and lead to the same place, the checksummed address is more accurate in determing if the address is a correct one.

Even though you can still use the non-checksummed address, it is recommended to use a checksummed address so that the payment gateway (MEW or an Exchange) can determine if the address you want to send the funds to is real.

Source: https://cryptobulls.info/error_36-input-address-not-checksummed

Everything works fine, check the address to which you want to send tokens or ETH. Check the number of characters. And most importantly pay attention to the address bar in your browser. Because there is a possibility that you are not on that site.

It's working, and it has always been working. Perhaps there's something wrong with the address. Try verify the address you're sending to is valid. Check the contract address as well. I'm sure it will work out.

Myetherwallet has really some problems this days. I think they are on maintenance or something? But whatever it is, I hope myetherwallet will be fixed soon. I also have the same problem as yours by the way, so I think Myetherwallet is the problem.

This error appears because the ETH address you would like to send coins to is not checksummed.
4 Simple Steps to transform an ETH address into a Checksummed one
Step 1: Head to etherscan.io
Step 2: Input the address you’re interested in viewing into the search field
Step 3: You will be taken to a page for the address, with balances and a list of transactions
Step 4: At the top of the page, see the checksummed version with capital letters included

more  information here (https://cryptobulls.info/error_36-input-address-not-checksummed)

you can try to change the node you're connected to in the top-right to Ether scan's node, I’ll fix the issue since the mew node is experiencing some issues.

maybe because the balance that is in your wallet does not meet the requirements,
but until now often happens like that. and must be repeated until a few new times can be tokens that we will send to the wallet that we will address..!!

This or the address is incorrect where you want to send your tokens or this token is frozen and cannot be sent

Every eth has two versions: Checksummed and non-checksummed. first go to etherscan.io, Input the address, You’ll be taken to a page for address, at the top see the checksummed version with capital letters and you can copy that into your address.

It could be that the address is incorrectly formatted or you don't pay enough fees, or it could be a problem with the site. :-\ :-\ :-\

I think you have some problems in your account or setting system cause I can't find any other reason for this, so my advice will be to check the setting system and follow the tutorial properly if you face this kind of issues further in the future ,there is no need to be panic

You should be able to send the transaction if the address is not checked sum. Do you have at least 0.001 ETH in your account for the gas fees?

I actually used myetherwallet to send token on the same day. I think the problem is that the token is locked and its not possible to send out a locked token.

yes, I also heard about this problem,   :'( but it is perfectly fine now I hope the user will be supportive regrading these kinds of issues cause it is a online based process and your account system also can be responsible for this, whatever the reason is I really hope we don't have to face it again.

Hello!
I have not encountered such a case.
However, through the search on gg, I found the article you may need.
https://cryptobulls.info/error_36-input-address-not-checksummed

Myetherwallet does not transaction in any address. I think if you double click the problem then the solution might be. Even then, you can take a screenshot of the problem and post it here.

I have not experienced this before as a matter of fact, i sent out many transactions yesterday and today and didn't encounter such a thing, maybe you should check to make sure you are on the right site, also you can change your browser and clear all your browser cache, i believe it should work fine.

Sometimes it happens, try to generate another transaction again, it will work. happened to me so many times but it sends the token.check also your gas fee

I think the problem is more about erc-20 huge traffic across the ethereum wallet, and you just have to chill and wait for the network to get resolved in due time

do not panic, do not try phishing sites
stay confident and calm always.

It would be better if they made a screen and showed what they write to you. You either incorrectly enter the address of the recipient, or you have no ETH in your account to pay the transaction.

Maybe the tokens you are going to send is still locked by the ICO. You should wait for it or maybe your internet connection is slow. Better try it any way around to confirm the problem.

When you send a token from wallet to market, make sure you set the gas fee automatically. Gas arrangements often make the transaction process error.

maybe it just server problem. I tried to check and it absolutely fine.   ::) Try to double check again hopefully now it will work.

Yes, I experienced this situation last time I processed to send my token. In the upper right side of myetherwallet.com website there's a Network ETH(Myetherwallet.com and try it to change into ETH (infura.io) and please check also your gas price to avoid an error. Hoping that my suggestion will help on your problem.

Yups,this is happened for how many times that many issues about myetherwallet .

I have been experienced same thing once but i just tried and tried for maybe whole day then it works,lateri found that it was a maintenance,i guess myetherwallet should make an advisory everytime theres a trouble on their site for the user not to rattle by this issues

maybe it's just a verification error, I recommend checking the email

Look through Etherscan, and search for your preference. Put the address there and you will see page for the address with the balance in it and transactions made so far. If needed contact their help desk line and team for further insight and support.

I didn't face this type of problem. maybe it just network error. If you face this problem , in that time maybe authority fix the problem. try again hopefully it will work now.

I believe it will work definitely. Please double check everything. Try to verifying your address  where you want to send the tokens  or you can also verified it by ico. ICO may come across this problem. I think it maybe  problem with contract

Last month one of my friend also faced this problem. Then he cames out from this difficulties by helped of some experts. So, by  getting help from experts can make it solved.

I think you should try checking etherscan.io where you will be asked the address you want to see. Put the address there and you will see page for the address with the balance in it and transactions made so far. There will be an option available where you can see checksummed version. If it doesn't help, contact their support.

I think I normally I see such a thing in myetherwallet when I copy and paste address on the address bar, but it doen't stop me from sending the my transactions, I suggest you ignore the error and try to send and see if it will go through.

I experience this issue on sending token in some exchange but as long as the address was correct nothing to worry you must proceed on it just try if it is work because when i proceed it was working on me so better to try it and have a gas high for the transaction don't mind the error just continue.

You can try etherscan io. Put your account details there and you will be taken to a page where you can see checksummed version. Other than this solution, there can be problem with the address you are putting on their website. Sometimes, this problem happens due to entering wrong address.

You should check if you have entered the correct address or not. Sometimes, the address being wrong shows such error message. There can be problem with GAS running out too. If you are too confused then I think you should contact their support system immediately.

 :-\ maybe it just server problem. I tried to check and it absolutely fine. Try to double check again hopefully now it will work. I look at this issue, because I have never experienced,  ::) hopefully there can be a solution. because so far I have not and have not experienced the most because of the gas is less.   :-\

Maybe it will work after verify the address. Try to verify the address where you are sending this. Or verify this to ICO. 

I had problems with purse like, I changed the server (on the upper right you can change) and successfully went

Try changing the server that you are using on the website, as that could be the problem. Also you might want to check if you have enough ethereum on your wallet for the gas prices as tokens tend to take a bit more gas then ethereum does. Once both of these things are set, I am certain that you will no longer have the problem of not being able to send.

I'm also getting this error but my wallet manage to send tokens to the address where I sent it to, just be sure the wallet you are sending tokens is correct and you have enough funds for the gas, it's better to use desktop wallet or hardwallet to send your tokens.

That was the problem. As I understand from your message. As I understand you had a mistake on your side, you misused your wallet. I assume you've already figured it out.

I also got problem like this, when i send tokens to my newly created wallet from exchange site, it will always show the errors in my phone, so i decided to use my loptop to make sure that the error can fix into another device and its work on my laptop. The problem is the gas limit and not the check sum error. Because in laptop it will automatically change the gas limit, while in phone is not so i cannot send token.

The tokens don't get sent to whichever address you want to send to. Try verifying the address, and after that double check everything and send it. If it still doesn't work then try communicating with the help centre.

I never had any problems with this wallet and everything always came on time. Most likely it is a failure in the system, do not worry

Sometime, I also have the same case. Then, I exit my brower and sign in Metamask again and do transaction normally. You should try to do as me

I sometimes see the address is not checksummed error when you first input the address field, as you go on to complete the remaining fields in the transaction such as token to send and amount, Gas for transaction then once all the fields have been completed and you Generate the transaction it disappears and has no effect on your tx.

Always good to check the receiving address in etherscan.io and verify it is real.

It's probably just a small system error. Do not worry about this, it is a very good wallet for storing all funds

Maybe the GAS you use is a little, so the results are like that.
Try to increase your GAS to increase your ERC20 token transaction.

And it could also be that the network is full and maintenance.

You need to make sure that you filled out all of the required fields or else the transaction will not go through. Also you should check to make sure that you have enough gas to make the transaction. Sending tokens tends to take more gas then sending eth so you might want to increase the gas price. Or maybe it is juts a system error.

There are few common problems with my ether wallet and you need just to be patient with you looking for frequently asked questions and then most likely you will find the answer to your issue.