Bitcoin Forum

Sounds promising, I would be interested to hear some independent users' experiences who tried out the beta version.

1) Are there any fees involved ?

2) Is there a watchdog function in place to monitor hashrates, gpu's etc. and restart the pc / msi / miners in case of any problems ?

3) Profitability comparisons vs using a miner directly or another aggregate service like Nicehash...

Good Luck

Thanks for the interest...check out discord...I believe we have alpha testers on...we have only released beta.

1) 1.6% dev fees...one minute an hour that we take in one lump amount of 24 minutes in 24 hours...look at what we are developing and you can see this is very low considering what we are offering.

2) Yes, you have all of that taken care of...talk to the devs in discord for more info...if a card is sick and it will restart the miner and can reset the pc.

3) It's always better to mine directly...however, our pools can pay about 15% over NH, but we added more features to get profit switching miners over to new/custom coins.

There is no more BAT files...all you need to program is the algo/username wallet add/mining url...you are up and running

I don`t understand. You have invented new Mining Control? Or new zpool? Or Nicehash? I dont see anything new and dony understand what profit can i get by using it.

We created the fastest mining platform out there. We have taken away the BAT files and everything is programmed for you. This is the simplest miner that you will use and the fastest.

We have almost all algos, the fastest miners available, and took away programming

We also have profit switching and created a guide to move from profit switching to mining coins directly that will increase your profits.

I have done very well creating my mining farm...I have tried multiple softwares...I found these two awesome developers and funded their project...This was built around me wanting to control multiple rigs, being able to switch coins instantly, and simple to use interface.

They created this remarkable beast, that I want to share with the world. If you try it (watch our tutorial video) you will not go back to the old bat files or some large corporation that is destroying the crypto community.

Im using this since it was zPoolminer.
Essentially its a really simplified tool to get into mining. It uses pools like zpool or zergpool and switches to the most profitable algorithm automatically.
What is really nice, especially for new miners, is that you can add custom coins. So as long as new coins dont use any new algo, you can just put in all the needed values (wallet, pool, algo) and start mining, without creating tons of batch files.

And if you dont have time to look for new coins, there is also the coins called "admin coins", which are updated frequently.

With the website all your settings also get stored, so you can easily copy them to multiple rigs or restore them in case something happens.

In the end of the day it just makes everything easier and more accesible. oh, and did i mention that the devs listen to your feature requests really carefully? thats actually the thing i like the most :)

Is there an interval that you can set so that it doesn't switch too often. With other solutions of this type, I find it really annoying when the program has to switch constantly from one algo to another.

The other question is how the initial testing is performed. Is there a lengthy initialization period until all possible algos are checked against your hardware?

Yes there is. You can switch by time (minimum mining time before switching...mixed rigs and control different times for both AMD and NVIDIA) and also switch by percentage...I set mine at 15% if I am profit switching between new coins.

The initial Benchmarking (I'm guessing that is what you mean) is minimal (no benchmark necessary for custom/admin coins). We have added stock benchmarks to most cards AMD and NVIDIA. Which allows you to start mining immediately (watch our video). As more and more people benchmark new cards, we will keep an average in the system. But once you benchmark the cards once...it's in the system and you never have to do again.

NVIDIA ccminer has auto adjust, no reason to benchmark these again...might want to make sure you benchmark T-Rex, Cryptodredge, and Z-enemy as they are the fastest miners for the algos they have...just make sure they are being used when profit switching.

AMD these do not have auto adjusting...you may have to benchmark all of your cards if they are not in the system...but once they are benchmarked, you gave those results to everyone with those cards...so we are trying to completely eliminate benchmarking while still offering accuracy.

Our next version after this we will be taking benchmarking almost completely out of the system as we are working on a new idea to benchmark your cards while mining any algorithm...this will be explained in later versions though.

Try us out..you will love it

Yes, that's what I meant.

Great to have a user friendly setup. I'm sure everyone, and especially newbies will appreciate this.

I'm currently on hold with mining, but next time I power up my GPUs, I will try you solution. By the way, 1.6% dev fees is less than some of your competition.

Thank you, I really do think you will like what you see...and if you don't, talk to us, we can add new features to our miner...we just need input from you to tell us what to add.

Yes, we aren't trying to make a fortune off of people...we do well in our own mining. We just are tired of NH and AM hurting our crypto by massive dumps in exchanges...if people new how easy it was to mine coins directly, we could all make much more money.

Everyone wants ease, there is no doubt profit switching is set up and walk away...but you are giving most of your income to a huge corporation...that in turn destroys the value and hurts us all while also contributing to the decline of trust in the crypto world.
We wanted to make a miner simple to use, cheap to use, and profitable.

I think we did.

I am catching non stop errors and issues with being stable or not responding.  Followed directions exactly as the youtube videos

Can you join discord and we can walk you through easier? I would be very interested to know what is happening.

What is your interests? Dev fee?

Nicehash doesn’t dump coins on exchanges.  They are a marketplace for renting hashrate.  Miners are paid in the rental fees that were already in BTC.  What the renters of that hashrate do with their coins has nothing to do with Nicehash.  Pools like zpool, zergpoog, are the ones who dump on the exchanges.

What does the acronym “AM” mean in your post?

Sounds promising indeed + very positive signal that you funded this project for this reason!

Awesome miner

But yes, NH does dump...that's how they pay you in btc... they massively dump

pools like zpool, zergpool and such give the option to mine coins directly and receive that coin...gives you more options, gives you control of your money.

1.6% taken out in one lump sum in 24 hours...so one minute every hour...we mine for 24 min at one time.

This is very minimal for what we are trying to offer and do...our goal is to not make a fortune off of this, but to increase value in the crypto world by offering better tools to build.

We are currently working with him to solve this issue.

NEW BETA...BUG IN SYSTEM THAT WAS FOUND THAT WOULD CAUSE SYSTEM TO CRASH....THANKS TO @LARZ AND @GHOSTING FOR HELPING TO LOCATE AND SQUASH!

If you had this issue, please download new beta!

I think you are confused about what Awesome Miner does.  It is a convenient way to manage your mining rigs.  If you choose to profit switch at pools that dump, then that is not AM’s fault.  You can certainly use AM to mine individual coins, and even “profit switch” individual coin pools, but that’s not dumping...  that is riding the profitability wave to gain more coins.  If you choose to sell than, again... that is not AM’s fault.


What exchange do they dump on?



I’m not so sure that most people use zpool or zergpool to mine individual coins.  You certainly can do that, but that is not the prevailing use-case.  By the way, you can use AM to mine individual coins on zpool and zergpool and many others.

You are correct in what you are saying...Let me be more specific,

Nicehash has all of the power...they mine a coin and destroy the small time miner...their algo switching capabilities are like no other and they can almost sense when the difficulty is about to lower...then they jump on a coin and raise the difficulty by a crazy amount leaving us miners to repair and sometimes we can be sitting for a while because the chain is stuck.

This gives the renter more power than the owner of the miner...this affects pool luck and many more issues in a matter of minutes of them being on a coin. Their patrons end up with coin and then it is dumped consistently...however...I'm not blaming NH...it's a great system but goes against what bitcoin stands for...One PC One vote.

Our goal is to make mining easy enough to allow the ability for a transition from profit switching to mining directly.

This means...we needed to add profit switching pools to our platform...but every where in our platform tries to get you to mine directly...we want to make it easy. We also make sure everyone knows you can get paid in different currencies on these pools.

What we offer for this transition is an easy guide to mine new coins...we have an admin section to where we give you the links to the wallets and discord and website to where you just have to input your wallet address...we try to offer other options to get away from the profit switching.

Most of know that profit switching is done because it's simple. you can walk away and leave it alone...what if it was just as easy to mine custom coins? This would give power back to the miner.

I have a lot of rigs...I'm not looking to get rich off this program...I'm looking to help people understand that mining directly is more beneficial, which in turn is more beneficial for the average miner...people are okay with a 1080ti making a dollar a day on profit...because it's easy...they don't know that the same gpu could make 30 times that in a day...we do have to go through a crazy amount of scam coins...but the 10% pay a fortune.

We just want people to know that their rigs are more powerful then just leaving on something like NH.

I applaud your intention.  How does anyone know that by using Hash-Kings that they will be mining the most profitable coin?  Do you have any side-by-side comparisons with identical rigs mining with Hash-Kings versus Nicehash, or just using a profit-switching pool like zpool or zergpool?

Thank you!

I will do a side by side comparison shot...let me work on that...great idea!

We have around 10 different profit pools to choose from which most can be paid out in different currencies and we encourage you to try and mine away from btc auto exchange.

Most pools will charge you a fee for using them, and then another fee to auto-exchange to btc...we are doing our best to get people to understand that more money is in direct mining, if we make it easy for you to mine directly then you should try it.

It can be just as simple mining new coins...the only difficult part is then learning to exchange to btc...we are working on a quicker solution. This is why we have admin coins. Admin coins are coins that have a good website, good announcement page, and an active community in discord. We will also be adding quick links to exchanges for these coins.

The most important thing is we have an active discord where our team is involved with answering questions. If you have a questions about exchanges, coins to mine, advice on when to sell...we are right behind you and will help you grow your mining business.

This is not about making Hash-Kings rich...this is about making mining profitable again by helping people understand the power that they have, even one gpu has power...DO NOT GIVE THIS POWER TO CORPORATIONS...Use this power to help us build a profitable community and continue to protect the integrity of what Bitcoin was really about!

We have some new things coming out soon...stay tuned

I will do believe in your product after you publish the result of working rig with WTM top and H-K2.0 for a day or a few.

I'll tell you what...I could post almost any result...how about you post one? If you do, I would give you 30 days on our program dev free...I could almost guarantee that you will like what you see. Remember it's still beta but you will see that we are close to being far superior than most other miners.

So this is my challenge to you...2 parts! next 5 days.

you do side by side comparison between NH and us...then you come to discord for a couple days and I tell you what coins to mine by use of our admin coins.

This will be the result...you will see us around 5 to 15% higher depending on day.
I will be over 30% higher by use of just admin coins with coins on the market.

300% higher by use of new coins (but this is pre-exchange so you won't know for a couple months, so really hard to test this one).

I have done extremely well in this mining venture by learning market trends and analytics of companies...I'm not always right by any means...but I'm pretty good. This program does everything that I did to make a decent living off this. These developers were creating something beautiful before I funded the project...I just added a little insight into how I am able to make money in this market.

Why do I want to do this? Why would I want others to profit off of mining direct more than profit-switching pools?

Mining pools and large corporations are hurting the integrity of what bitcoin is...if people started mining directly then we all could make 10 to 20 times more money from exchanges. It's easy to do...it doesn't cost you anything...who cares about our measly 1.6% if you are making a lot more?

I don't think we will win this battle...but I do want to do my part to start the revolt against them. I want our currency to stay decentralized...One PC One Vote...put the power back into miners hands...where one gpu could turn into 100 gpus in a few months with work and patience. It takes discipline to live broke while spending thousands on equipment. I spend more on my electric bill than I do my mortgage.

Why not show how easy it is to make good money mining? Why not build an honest community wanting to help build each other's mining business. I'm not competing with you, I want to help you...I want people to know it's just as easy to make money without sources like NH.

It is just a question of luck and knowledge/feeling when it is right moment to sell.

Yes it is...it's a lot of luck...but it's also moving around your rigs alot...it's understanding the difficulty adjustments...However, I think there is a few more things that we can offer to really help miners...so we are adding a few more features real quick and should be done today. So look out for our new beta coming!

I presume you would agree that most people, even the most involved miners, are looking for a fire and forget kind of solution, where the rigs are working on their behalf with

minimal to no maintenance for weeks and months even... Is there a way where we can just set the program to mine the most promising coins (the developers' top picks etc.)

without us having to manually interfere all the time ?.. I certainly don't want to be checking discord channels regularly for the latest gossip on what's the hottest coin, I would

just like to see those coins mined and already transferred to my account (and even converted to BTC at favorable prices without ridiculous commissions)...

This is the exact kind of input we are seeking and funnily enough that was a topic this morning. I wish you would join discord and give us some more ideas.

The question is logic...how can we create an algorithm that gives the user control while still having simplicity on mining directly. We have some ideas and are looking into implementing one. Which I will discuss after we test a few times and make sure it's possible.

We are looking at being able to automatically create wallets but we don't want to have any access to these...we don't want them on our system at all...we never want to be vulnerable to an attack on our users. Right now we are implementing...if you change wallet information online (we only hold receive keys, mining url, and mining password), it will alert on the platform that a coin was changed...that way if your password was taken and someone tried to change to their wallet info online...it would alert you on the platform.

We are also considering putting a new coin or a news alert on the platform to where you can see what is new and worth mining.

We have developers wanting to continue to build the easiest platform that will allow people to transition into mining directly with the ability to leave for weeks at a time...but we need input.

Thank you for taking the time to post and hope I answered your question,
James

We may have a solution! We are currently testing something that will do everything you just asked...I'll let you know if it works!

1.15.0.3 released small bug fix relating to devfee. This Version will require you to delete the database.sqlite file if you are upgrading.
https://bitbucket.org/hashkings/beta/downloads/

NVIDIA only:

Just announced in zerg, zpool discord that only z-enemy and ccminer are working correctly on their phi2 stratum please disable others if profit switching.

I have tried this miner; there are some questions:
1. Why for one rig of 7 gtx 1080 ti miner startes 3 different algo (with low proffit 0,2$ per card)?
2. Why for the same card miner trying to start algo twise - two windows for the same card.
3. Why miner uses t-rex 5.1 instead 5.7?
4. Why for zpool (supported algos only) benchmarking launches 68 algos?

I am not a free tester, so I will wait for real product.

Let me see if I can answer a couple...but do agree that there seems to be an issue.

1) it can take a few minutes for the miners to adjust and switch to correct algo...how many pools are you using? values can change rapidly within 24 hours...you should average about 15% higher than NH in a given day.

2) this is an issue we have to find...I haven't been able to replicate...does two miners actually open or is it just on platform screen? Possibly one showing 0 hashrate?

3) We have to use a version of miners that report the api in a certain way...Trex is an awesome miner but we need a version that works well...as they update newer version to include an api that we can use, we will update.

4) I'm not sure what you mean...are you asking why there are 68 algos in zpool? or are you saying there are algos there that shouldn't be?

We are are really trying to create something special and appreciate your input very much.

Thanks,
James

I'm only an amateur miner at best but I'm confused a bit about some of the terminology.

1. What are admin/custom coins?
2. If miner switches algos or coins automatically, in what do I get paid? (you mentioned NH dumping to convert to BTC, that wouldn't happen here?)
3. I'm philosphically being the idea, but how does this decentralize mining, isn't this essentially another pool?
4. Would there be minimum rig specs to make this worth it?

Thanks.

Wonderful questions and thank you for taking the time to ask.

1) Admin coins are coins that have been voted on by administration and other users. These are coins that have good websites, announcements, active community in discord. These are new coins though...there is a risk but we try to minimize that risk as much as possible. We set everything up for you: you just have to click on the download wallet link and insert your wallet address, we already put the mining url and algorithm in.

Custom coins is what we call a coin that is not in our system...we don't force you to mine a certain coin or even certain algos. You can easily mine coin directly for far greater profits than profit switching. You only have to enter: the algo, mining url, wallet address...that's it. Our discord channel can help you understand how to mine directly.

2) We have several different profit switching pools that you can use in our system...they pay out in a multitude of currencies...Let me be very clear here, profit switching pools are part of the problem, however, we highly recommend using these pools and getting paid in different currencies. This in essence stops them from dumping that coin and forces them to hold to give to the miners mining it. Giving you the power to help the system.

Giving you an example...I'm currently losing a lot of profit mining HTH coin. I am mining on profit switching pool to help slow down their dumping on that coin. I like the coin a lot, so I am giving my vote to have a pool not dump that coin. (does this make sense?, hard concept to relay)

3) We are considering coming out with a pool but that is for another topic as our pool will be very different and I cannot explain the differences just yet. The second answer is in line with this. YOU CAN GET PAID IN BTC, BUT WE RECOMMEND PEOPLE TO CONSIDER GETTING PAID IN OTHER CURRENCIES on these pools.

The whole goal is to slow the constant dumping onto exchanges....There is a way to have profit switching without causing the dumps...we highly encourage this and it is more profitable. You may have to hold a little longer before exchanging to btc but you can do 3 to 20 times greater. The bull run is around the corner, don't put your trust only in btc...even if you had some btc...how much would it have to increase for you to double your money? You can mine coins right now that are at 1 sat...these can jump to 3 sats once every couple months.

4) no min rig spec at all (one big one...we are Windows only, no Linux support just yet...let us get the bugs out of windows first)...we are trying to show that anyone can build a mining business in this economy if they stop thinking mining directly is difficult...it isn't, it's easy. One gpu can become two or three, can become 10 rigs...if you have the tools to help.

I hope this answers your questions. We are passionate about this project and hope others come and help us build it...We are looking for insight, we want your ideas. We have great developers, let's use them to build something to help our industry.

If you have any more questions, please let me know,
James

1. I mean I have 7 gtx 1080 ti and miner decided: for one launches BTX with 0,2$ per card, for the other - shunk and neoscrypt. They are the same gtx 1080 ti!
4. I choose zpool and there are not 68 algos there. For what miner is benchmarking 68?

I believe we are currently working with you in discord...hopefully we can find a resolution.

Thanks for taking the time,
James

We want to thank several of our beta testers that helped us!

We were able to update the new cryptodredge miners and they work well.

Please download new beta

This has to be a fresh install, everything in folder must be deleted.

If you already inserted wallet information, please sign in online and get an api key to insert in program...then push save and close and verify it's online.

With new install you will have to download all miners again.

When starting push settings and enter your api key, rig name, rig type. Click save and close.

Click update server and all of your wallets will be there.

Thank you and we apologize but this was out of our control as the miners themselves had the issue,
James

Awesome Good Stuff!  I'm working on adding cryptodredge to AIOMiner tonight.  Seems people like it, so many damn miners to keep up with.  Good luck with your guys project!

Thanks and on your project as well!

As requested,

https://www.youtube.com/watch?v=9ZpQRUYLBwA

NiceHash vs Hash-Kings

Remember though, there are many more options than just profit switching with our miner!

DISABLE HSR...HSR GOING THROUGH A FORK AND THERE WILL NO LONGER BE HSR

I'm not sure why bitcointalk took down our post showing NH vs HK but they did

These are some comparisons between NH and HK

Just a few comparison of algo speeds vs nicehash

algo                       nh                     HK
neoscrypt          1.4MH/s            1.39MH/s
lyra2REv2         66.74MH/s        78.37MH/s
x11 Gost           11.38MH/s        16.2 MH/s
Blake2s               5.9GH/s            7.2GH/s
Skunk                 50.91MH/s        52.3MH/s
Lyra2z               2.9MH/s               3.8MH/s
x16r                   13MH/s                17MH/s

We are so much more than profit switching...with almost every GPU algorithm, we welcome you to try and also become involved in giving ideas to make this even better!

DO NOT POST BALANCE SHEETS WITH API KEYS IN THEM

Whomever was going to send that post on NH vs HK you are spreading your btc out too much...I wouldn't pick so many pools! Just some advice...but I see it's working for good for you!

What? Nicehash does not dump. They pay you in BTC because their customers pay them in BTC + fee to rent hash.

I have answered this many times and will do so again. Nicehash is indirectly dumping by giving more power to renters then to the owners of the mining equipment. When nicehash jumps on a coin the coins difficulty raises tremendously, sometimes even stopping the chain in it's tracks for hours. Leaving the actual miner with less power than the NH renters. This in turn makes it more feasible to rent hashpower than to buy your own rigs. Yes, as I have said many many times, NH is not directly dumping on the exchanges, but they come with so much power that the coin is by large margins going to the renter which with no overhead, is dumping the coin. (this is absolutely a fact...we miners understand this and are always looking for a way around NH).

Auto profit pools directly dump the coin...This entire project is about showing you how easy it is to control your own future. Control when you sell the coin, when you hold the coin. Give you the options!

We must change this...Bring the power back to the owners of the equipment.

You went all the way back to that comment but you missed my very next one explaining?

It seems the latest Windows update is causing some issues with the platform...if you have this issue to where you cannot open the platform, follow these steps:

Get an online account! This way you don't have to re-enter your addresses!
Then make sure your api key is in settings and push save and close
open up the folder where HashKings is and delete your config folder
restart HK open settings and input your api again, save and close
click on update server data button
all information is restored and you can continue mining!

Apologies on this, we are working on a solution

In mining, I highly recommend taking windows update off...updates can always cause issues with any software!

What comparison? Different miners? Everyone can use better miners than nicehash.
What I see is rather bad soft. It downloaded 1Gb+ of miners. On nvidia only rig it downloaded a bunch of useless sgminer and other amd-only miners. For what reason? Than it just hang because of hang hardware monitoring driver and didn't even gave no option not to use it.

Thanks for your comment...let me see if I can help

Yes...every one receives the same miners because we have a lot of mixed rigs out there...it's approx 800MB worth of miners. We will be putting out an option later to limit the downloads to your rigs but our main concern is getting bugs out of the system.

The hanging, I'm unsure and would be happy to help you troubleshoot to get it up and running so you can see the value of our program and then do a review.

One thing though...yes, the comparison is due to our miners...but the speeds are accurate. If you have faster miners than NH you will make more than NH. What are you saying here? That we can't claim to have faster speeds because we use different miners? But our speeds are faster, by a wide margin.

I would be more than happy to help you with any issues in our software...but if you choose not to want to work it out, that's fine also, we will inform everyone when we have a stable version. However, I've been using this with no issues and am doing very well.

Let us know if we can help.

Thanks,
James

We use libreHardwareMonitor which is the most maintained fork of the old OpenHardwareMonitor. However I have been seeing a lot of reports of people that have lower end CPU's like a G4400 getting hung so I am planning to remove hardware monitoring in one of the upcoming beta releases until we can develop a better in house solution.

I mean that anyone can also use faster miners with nicehash and get better results also. But the point is that comparing hashrate of algoswitching soft is ridiculous. Miners are compared by hashrate. But you present it as if your soft was a miner.

I apologize you feel that way...If you look at our announcement it explains what miners we are using...yes, we are the platform that brings the miners together and allows for easy programming of the miners.

All you have to do is insert mining url, algorithm, wallet...then push start...no more BAT files needed and all your information is stored on a server so that it can be transferred to all rigs with a click of a button.

Thanks for your input, we are working to make this much better...but it's pretty good now!

Thanks,
James

I also want to mention that we are far more than just a profit switching platform...we want people to have easy ability to mine coins directly. Our main goal is to have a software that makes it easier to not only mine directly but also walk through the steps to exchange (we are working on this part)

We also recommend that if you do profit switching that you try and get paid in different currency than just BTC...we just want everyone to have all the options available to mine any coin.

You'd better look at your competitors. Many of them give the ability to mine directly. For example HashAuger is much more user friendly. Also can mine custom coins and include them in profit switching algo. MinerControl also can do the same. AwsomeMiner - the same and also has some kind of "server" part. HiveOS has great userfriendly and stylish server part - but it's linux and has it's drawbacks for ordinary miner. Especially in profitswitching terms - not "out of the box".
For the moment - you definetly need at least a UI designer - yours is not good at all. Even pdf has colors that tear out my eyes.
Miners also are obsolete in your soft. Latest versions gave nice improvements. The idea to download all of them in a zip (nicehash way) is not good at all. Redownload each time whole zip, when 1 or 2 were changed?

We definitely know our competition and if you can't see the difference and I haven't expressed it enough in our comments, I don't think this is an achievable debate. I appreciate your criticism and we are working on several of what you mentioned. I can only guess you haven't really been through our system or you would see the difference.

Can I ask have you really tried the software? From what I read, you gave up after it hung on you...it seems you are missing some information on our miner. I could be wrong though...you seem to be concerned on visual appearance and while agree that is important and we are working on it...our energy is going into the operation of our software, when we get bugs out we will work on a new GUI as stated from our CEO Cryptominer.

I do not mind your criticism, actually I appreciate it. Right now though visual aspects are the least of our concerns...but will become a priority when bugs are out of system.

Thanks again,
James

1) Again you speak about your soft as a miner.
2) There is a difference between soft for geeks and userfriendly one. Nicehash made NH2 much more simple then previous version. Simplicity of usage is important anyway. Also there are different requests from small motherhouse miners and owners of dozens/hundreds of rigs.

I did use the term miner and possibly that is where you got confused...It is a platform but miner just comes out naturally I guess. Yes simplicity is very important and we are working on it...but it is pretty simple right now.

Try it, if you can't get it working, let me know I'll help...try it a few hours get the feel of it...it is pretty simple to use!

Great to hear! Thank you!

Come join us in discord if you haven't already and join in on the fun!

Hey people, listen up... even if you don't use the software, this is a good place to be and these are the people you want to in the community.  Can't do it now but one of the first things I'll be doing this afternoon: joining the Discord server.

Even if you are not a miner, this is a great way to learn about new coins and to learn about new coins from people who know what to look for.  It won't 'just' be the website or team analysis but also algorithm selection and planned coin supply and distribution models. 

I've learned a lot about mining since 2013 but I'm only recently delving more into new coin strategies and I look forward to what tips and tricks I may learn here.

Oh, and I do plan to use the software after joining the discord and learning some more about it.

Thank you very much for these comments...did you visit our discord? I'm just wondering as it seems you have a lot of insight on what we are trying to do...we appreciate the words and will do whatever we can to help build a strong community of miners that want to help each other grow their business!

I frequently join discord servers.  Today is the first I've learned of this project and I'm not in a system where I can access discord.  But I will join later today.

Good to have you on board for now! I think you will be very happy with what you see!

so here's my 2 cents on hash-kings, their software, and their team/community.

//BTCBTCDISCLAIMER: CRYPTO NOOBBTCBTC//

first lets talk team/community. i jumped in the discord pretty much as soon as i heard about this project to see what it was all about. i had been having an issue regarding miners recognizing AMD cards. James, their COO, really made it his mission to help me figure out what was going on. he must have spent 3-4 hours trying to figure out what was going on. As a brand new member to their community, that really speaks volumes about the character of their organization and the future their trying to build. their chief software dev was personally helping me debug some issues i was having. great guys and a great community that anyone, new or experienced, could jump right in and be part of the group.

Software-wise, using this stuff will make you say, "where have you been all my life?!" But seriously, the mining software is super easy to use, they have pretty much any algorithm you could want to mine, setup is smooth and painless and here's the best part. The hash rates are better. noticeably better.

So i urge you, even if you're unsure, come join the discord. hang out for a bit, see what these guys are all about. you wont be disappointed. let the community speak for them, and i think you'll stick around too.

I know exactly who you are lol...Thank you so much...I'm glad we got your rig working!

His problem wasn't with our software, he had a rig that he couldn't get any miner to read his cards...we worked with him to fix the rig and now it's mining well on our platform. Thank you for giving us the chance to be a part of your success!

New Beta!!!!

Delete your bin folders, internal folders, and a file called database.sqlite before installing!

New Miners, need new bins. Need new internal folders. x16r ccminer and crypto dredge should be autobenchmarked while mining. The benchmark process is using the most complex algorithm it can. So it will look a lot different than x16r trex which is now using actual mining to average the hashrate for the benchmark.

Also testing stability on more than 6gpu rig.

Thanks for the detailed answers. I will continue looking at this. I have to wait a little while before my current mining reaches minimum payment threshold before I change over to something else. This looks promising.

If you have any issues, please join us in discord and I would be happy to help.

Thanks and good luck!

Your COPY enabled algos from one card to another seems to not be working...thoughts?

I'll test that...I've used it several times so unless something has changed, then it should work.

I'm guessing you are talking about right clicking on the card and then using the copy section...remember, this will not work if you are mining though...you have to stop the mining process

I retested and made sure it was not mining and that function isn't working...The only version I've tried is the latest beta release

I had to stop last night during benchmarking since after 40 mins the rig was at 30/114. Rig has 10 1080 Ti EVGA SC2 and pentium G3900 with 8 GB ram. I am planning to give it a try later today. Is there a shortcut or ways to bypass benchmarking? Maybe use GPU specific known settings?

With 1080's you shouldn't have to benchmark at all...were they not filled in for you?

They will automatically adjust as you are mining

I just tried to and it worked fine...if/when you are on next please join me in discord and let's get this issue solved

I tried but got a message need benchmarking for at least 2 algos before mining can start.

When you have time, come into discord and I can help you through any issues/process you would like

We just added new algorithms that hasn't been benchmarked by anyone yet...I'm benchmarking now so hopefully you won't have to benchmark any new algo after today.

you doing very well..

Thank you very much!

Yes James is right we did add a few new algorithms, to speed up the process uncheck all but one card in benchmarking then benchmark that 1 card. Once that card finishes you can right click on the disabled cards and copy the benchmarks from the one that benchmarked. Then re-enable the other cards and you should be good to go.

Thanks Crypto for stepping in!

We are coming closer and closer to Stable version. We fixed visual bugs and miner window bugs. We are now entering into changing our GUI to simplify and for aesthetic changes.

If you are experiencing any issues please share with us in Discord!