Bitcoin Forum

Bitcoin => Mining support => Topic started by: squall1066 on March 05, 2014, 03:37:48 PM



Title: gridseed setup help
Post by: squall1066 on March 05, 2014, 03:37:48 PM
Hiya, first off, I have read the guides here on gridseed, My problem is a little unique, If anyone can help me, I would be thankful.

I have received 10 units of the 5-chip units and a "wiibox" controller.

I have set up one unit on a molex to barrel connector on a 750w thermaltake silver PSU and it is spinning up lovely, I have powered up the controller using a phone charger (5v @ 0.7Amp)

I can log on to the controller but however see this.

http://i1242.photobucket.com/albums/gg522/squall1066/wiibox_zps3d21d7af.png

I dont understand a word of it, However, I used google translate and found out that the green boxes say "no btc/ltc miner attached"

I have the unit plugged directly in to the usb on the controller.

The green light on the miner flashes about every other second for a second, There is a red light comes on for a few min then off for a few min?

any thoughts plz guys?


Title: Re: gridseed setup help
Post by: squall1066 on March 05, 2014, 11:29:57 PM
Dont worry, I used the windows approach by miaviator.