Title: [Reference] May 2019 "Multi-Level" menu values
Post by: tim-bc on July 17, 2019, 07:39:34 PM
Disclaimer : 2019 firmware versions disable SSH access.So during my journey to automate configuration of miners using set_miner_conf.cgi rather than SSH, I found that the drop-down efficiency menu on the configuration page has some numerical values which you need to know in order to construct the data from scratch: 1 : Normal
228 : HashRate+2.0TH/S
227 : HashRate+1.5TH/S
226 : HashRate+1.0TH/S
225 : HashRate+0.5TH/S
250 : HashRate Unchanged-Lower Voltage
241 : HashRate-0.5TH/S
242 : HashRate-1.0TH/S
243 : HashRate-1.5TH/S
244 : HashRate-2.0TH/S
245 : HashRate-2.5TH/S
246 : HashRate-3.0TH/S
240 : Low Power Enhanced Mode So the data string to set to enhanced LPM (on default pools) would look something like this (*colons should be encoded as %3A* notice the 240 at the end): _ant_pool1url=stratum.antpool.com:3333&_ant_pool1user=antminer_1&_ant_pool1pw=123&_ant_pool2url=stratum.antpool.com:443&_ant_pool2user=antminer_1&_ant_pool2pw=123&_ant_pool3url=stratum.antpool.com:25&_ant_pool3user=antminer_1&_ant_pool3pw=123&_ant_nobeeper=false&_ant_notempoverctrl=false&_ant_fan_customize_switch=false&_ant_fan_customize_value=&_ant_freq=&_ant_asic_boost=false&_ant_low_vol_freq=false&_ant_economic_mode=false&_ant_multi_level=240 For example, in bash I can put this data into the $data variable, and send it to set_miner_conf.cgi like so (with $1 = ip and $2 = web password): curl --anyauth --user root:$2 -i -H "Accept: application/json" -H "Content-Type:application/json" -X POST -d "$data" "http://$1/cgi-bin/set_miner_conf.cgi" Lastly, sometimes you may only want to change the efficiency mode without altering the pools. No need to hardcode the pools, you can get them from the miner even when API is down. By using mapfile, you will preserve empty fields, such as blank passwords or no third pool: $ mapfile -t pools < <(curl -s --anyauth --user root:$2 $1/cgi-bin/minerConfiguration.cgi | grep -e '"url' -e '"user' -e '"pass' | cut -d ":" -f2- | cut -d '"' -f2)
$ printf '%s\n' "${pools[@]}"
stratum.antpool.com:3333
antminer_1
123
stratum.antpool.com:443
antminer_1
123
stratum.antpool.com:25
antminer_1
123
Title: Re: [Reference] May 2019 "Multi-Level" menu values
Post by: s3binator on August 03, 2019, 04:15:13 PM
So I wanted to contribute by showing how I did this using requests, but I have a little snag EDIT: FIXED. Everything works except for the working mode never updates. The config file that is loaded when loading the configuration page gives No matter what I place into the '_ant_multi_level' field, it's always blank, and this forces Working Mode to be set to Normal via the get_miner_conf javascript function. I unpacked the newest firmware, and found the set_miner_config.cgi file. It looks like this: #!/bin/sh
#set -x
ant_pool1url=
ant_pool1user=
ant_pool1pw=
ant_pool2url=
ant_pool2user=
ant_pool2pw=
ant_pool3url=
ant_pool3user=
ant_pool3pw=
ant_nobeeper=
ant_notempoverctrl=
ant_fan_customize_value=
ant_fan_customize_switch=
ant_freq=
ant_voltage=
ant_asic_boost=
ant_low_vol_freq=
ant_economic_mode=
ant_low_vol=
ant_input=`cat /dev/stdin`
ant_tmp=${ant_input//&/ }
i=0
for ant_var in ${ant_tmp}
do
ant_var=${ant_var//+/ }
ant_var=${ant_var//%23/#}
ant_var=${ant_var//%24/$}
ant_var=${ant_var//%25/%}
ant_var=${ant_var//%26/&}
ant_var=${ant_var//%2C/,}
ant_var=${ant_var//%2B/+}
ant_var=${ant_var//%3A/:}
ant_var=${ant_var//%3B/;}
ant_var=${ant_var//%3C/<}
ant_var=${ant_var//%3D/=}
ant_var=${ant_var//%3E/>}
ant_var=${ant_var//%3F/?}
ant_var=${ant_var//%40/@}
ant_var=${ant_var//%5B/[}
ant_var=${ant_var//%5D/]}
ant_var=${ant_var//%5E/^}
ant_var=${ant_var//%7B/\{}
ant_var=${ant_var//%7C/|}
ant_var=${ant_var//%7D/\}}
ant_var=${ant_var//%2F/\/}
#ant_var=${ant_var//%22/\"}
#ant_var=${ant_var//%5C/\\}
case ${i} in
0 )
ant_pool1url=${ant_var/_ant_pool1url=/}
;;
1 )
ant_pool1user=${ant_var/_ant_pool1user=/}
;;
2 )
ant_pool1pw=${ant_var/_ant_pool1pw=/}
;;
3 )
ant_pool2url=${ant_var/_ant_pool2url=/}
;;
4 )
ant_pool2user=${ant_var/_ant_pool2user=/}
;;
5 )
ant_pool2pw=${ant_var/_ant_pool2pw=/}
;;
6 )
ant_pool3url=${ant_var/_ant_pool3url=/}
;;
7 )
ant_pool3user=${ant_var/_ant_pool3user=/}
;;
8 )
ant_pool3pw=${ant_var/_ant_pool3pw=/}
;;
9 )
ant_nobeeper=${ant_var/_ant_nobeeper=/}
;;
10 )
ant_notempoverctrl=${ant_var/_ant_notempoverctrl=/}
;;
11 )
ant_fan_customize_switch=${ant_var/_ant_fan_customize_switch=/}
;;
12 )
ant_fan_customize_value=${ant_var/_ant_fan_customize_value=/}
;;
13 )
ant_freq=${ant_var/_ant_freq=/}
;;
14 )
ant_voltage=${ant_var/_ant_voltage=/}
;;
15 )
ant_asic_boost=${ant_var/_ant_asic_boost=/}
;;
16 )
ant_low_vol_freq=${ant_var/_ant_low_vol_freq=/}
;;
17 )
ant_economic_mode=${ant_var/_ant_economic_mode=/}
;;
18 )
ant_low_vol=${ant_var/_ant_multi_level=/}
;;
esac
i=`expr $i + 1`
done
echo "{" > /config/bmminer.conf
echo "\"pools\" : [" >> /config/bmminer.conf
echo "{" >> /config/bmminer.conf
echo "\"url\" : \"${ant_pool1url}\"," >> /config/bmminer.conf
echo "\"user\" : \"${ant_pool1user}\"," >> /config/bmminer.conf
echo "\"pass\" : \"${ant_pool1pw}\"" >> /config/bmminer.conf
echo "}," >> /config/bmminer.conf
echo "{" >> /config/bmminer.conf
echo "\"url\" : \"${ant_pool2url}\"," >> /config/bmminer.conf
echo "\"user\" : \"${ant_pool2user}\"," >> /config/bmminer.conf
echo "\"pass\" : \"${ant_pool2pw}\"" >> /config/bmminer.conf
echo "}," >> /config/bmminer.conf
echo "{" >> /config/bmminer.conf
echo "\"url\" : \"${ant_pool3url}\"," >> /config/bmminer.conf
echo "\"user\" : \"${ant_pool3user}\"," >> /config/bmminer.conf
echo "\"pass\" : \"${ant_pool3pw}\"" >> /config/bmminer.conf
echo "}" >> /config/bmminer.conf
echo "]" >> /config/bmminer.conf
echo "," >> /config/bmminer.conf
echo "\"api-listen\" : true," >> /config/bmminer.conf
echo "\"api-network\" : true," >> /config/bmminer.conf
echo "\"api-groups\" : \"A:stats:pools:devs:summary:version\"," >> /config/bmminer.conf
echo "\"api-allow\" : \"A:0/0,W:*\"," >> /config/bmminer.conf
if [ "${ant_nobeeper}" = "true" ]; then
echo "\"bitmain-nobeeper\" : "true"," >> /config/bmminer.conf
fi
if [ "${ant_notempoverctrl}" = "true" ]; then
echo "\"bitmain-notempoverctrl\" : "true"," >> /config/bmminer.conf
fi
if [ "${ant_fan_customize_switch}" = "true" ]; then
echo "\"bitmain-fan-ctrl\" : "true"," >> /config/bmminer.conf
echo "\"bitmain-fan-pwm\" : \"${ant_fan_customize_value}\"," >> /config/bmminer.conf
fi
echo "\"bitmain-use-vil\" : "true"," >> /config/bmminer.conf
echo "\"bitmain-freq\" : \"${ant_freq}\"," >> /config/bmminer.conf
#if [ "${ant_asic_boost}" = "true" ]; then
# echo "\"bitmain-close-asic-boost\" : true," >> /config/bmminer.conf
#fi
if [ "${ant_low_vol_freq}" = "true" ]; then
echo "\"bitmain-close-low-vol-freq\" : true," >> /config/bmminer.conf
fi
if [ "${ant_economic_mode}" = "true" ]; then
echo "\"bitmain-economic-mode\" : true," >> /config/bmminer.conf
fi
echo "\"bitmain-low-vol\" : \"${ant_low_vol}\"," >> /config/bmminer.conf
echo "\"bitmain-voltage\" : \"0706\"" >> /config/bmminer.conf
echo "}" >> /config/bmminer.conf
sync &
sleep 1s
# cp /www/pages/cgi-bin/minerConfiguration2.cgi /www/pages/cgi-bin/minerConfiguration.cgi -f
sync
/etc/init.d/bmminer.sh restart >/dev/null 2>&1
sleep 5s
echo "ok"
It seems like the code I provide below should work. Are there any suggestions or thoughts? Note: The URLEncode line below my dictionary converts the dictionary into the same format as Tim's data. EDIT: There was one field missing '_ant_voltage', in both Tim's and my data payload. This missing field caused the set_miner_conf.cgi bash script to improperly read what was sent after the '_ant_freq' field. I have updated the code below to working code, along with a working payload for curl.from requests.auth import HTTPDigestAuth
import requests
import urllib.parse
ip = 'ip'
url = 'http://' + ip + '/cgi-bin/set_miner_conf.cgi'
data = {}
data['_ant_pool1url'] = 'url1'
data['_ant_pool1user'] = 'user1'
data['_ant_pool1pw'] = 'x'
data['_ant_pool2url'] = 'url2'
data['_ant_pool2user'] = 'user2'
data['_ant_pool2pw'] = 'x'
data['_ant_pool3url'] = 'url3'
data['_ant_pool3user'] = 'user3'
data['_ant_pool3pw'] = 'x'
data['_ant_nobeeper'] = 'false'
data['_ant_notempoverctrl'] = 'false'
data['_ant_fan_customize_switch'] = 'false'
data['_ant_fan_customize_value'] = ''
data['_ant_freq'] = ''
data['_ant_voltage'] = ''
data['_ant_asic_boost'] = 'false'
data['_ant_low_vol_freq'] = 'false'
data['_ant_economic_mode'] = 'false'
data['_ant_multi_level'] = '240'
payload = urllib.parse.urlencode(data)
r = requests.post(url, auth=HTTPDigestAuth('root', 'root'), data=payload)
The payload is the string: _ant_pool1url=url1&_ant_pool1user=user1&_ant_pool1pw=x&_ant_pool2url=url2&_ant_pool2user=user2&_ant_pool2pw=x&_ant_pool3url=url3&_ant_pool3user=user3&_ant_pool3pw=x&_ant_nobeeper=false&_ant_notempoverctrl=false&_ant_fan_customize_switch=false&_ant_fan_customize_value=&_ant_freq=&_ant_voltage=&_ant_asic_boost=false&_ant_low_vol_freq=true&_ant_economic_mode=false&_ant_multi_level=240
The above string can be used with curl, as shown by Tim in the original post.
Title: Re: [Reference] May 2019 "Multi-Level" menu values
Post by: tim-bc on August 21, 2019, 10:25:51 PM
updated the code below to working code, along with a working payload for curl.[/b]
EDIT: There was one field missing '_ant_voltage'
Thanks for catching that! I actually discovered that I had left out _ant_voltage shortly after, at first I had tested changing from Enhanced -> Normal so I simply assumed everything worked. I should have posted back here earlier, but unfortunately I've had to take a break from mining for the moment, until we launch a new facility. To make up for it I'd like to share the bash script I've got for this so far. #!/bin/bash
# Antminer configuration via web portal
# Argument1 = IP Address
# Argument2 = Web Password
if timeout 1 ping -c 1 $1 &> /dev/null
then
# Check firmware version
version=$(curl -s --anyauth --user root:$2 $1/cgi-bin/get_system_info.cgi | jq '.system_filesystem_version')
echo "Firmware Version: $version"
# Get current pool settings
names=(_ant_pool1url _ant_pool1user _ant_pool1pw _ant_pool2url _ant_pool2user _ant_pool2pw _ant_pool3url _ant_pool3user _ant_pool3pw _ant_nobeeper _ant_notempoverctrl _ant_fan_customize_switch _ant_fan_customize_value _ant_freq _ant_voltage _ant_asic_boost _ant_low_vol_freq _ant_economic_mode _ant_multi_level)
mapfile -t pools < <(curl -s --anyauth --user root:$2 $1/cgi-bin/minerConfiguration.cgi | grep -e '"url' -e '"user' -e '"pass' | cut -d ":" -f2- | cut -d '"' -f2)
pools+=('false') #nobeeper
pools+=('false') #notempoverctrl
pools+=('false') #fan_customize_switch
pools+=('') #fan_customize_value
pools+=('') #freq
pools+=('0706') #voltage
# Nov 2018 ends here
pools+=('false') #asic_boost
pools+=('false') #low_vol_freq
pools+=('false') #economic_mode
# Dec 2018 ends here
pools+=('240') #multi_level
# Set configuration
data=$(for ((i=0; i< "${#names[@]}"; i++)) do printf "%s=%s&" "${names[$i]}" "${pools[$i]}"; done)
data=$(echo "${data%?}" | sed 's/:/%3A/g')
curl --anyauth --user root:$2 -i -H "Accept: application/json" -H "Content-Type:application/json" -X POST -d "$data" "http://$1/cgi-bin/set_miner_conf.cgi"
else
echo "EXIT: Miner offline"
fi
Also I'm wondering if anyone knows what "economic_mode" is and/or if it does anything. It is present in the Dec 2018 & May 2019 payloads and there's also a hidden checkbox for it on the configuration cgi page. Doesn't seem to do anything as far as I can tell.
|