Title: bitcoin.exe/bitcoind.exe on win32 and more than 9 miners Post by: spiccioli on November 15, 2011, 08:02:50 PM Hi all,
is there someone here using bitcoin as a server on win32 to solo mining with more than 9 miners? I'm trying, but it dies after a few hours/minutes with an exception. This is on a windows xp pc. Any help appreciated. spiccioli. Title: Re: bitcoin.exe/bitcoind.exe on win32 and more than 9 miners Post by: jkminkov on November 21, 2011, 04:56:49 PM I had no problems with 10 miners/about 4Ghash/s with server ip put in DMZ, read some logs, it could be memory failure, overheating cpu, bad NIC, bad NIC drivers, missconfigured router, lack of free space on c:
Title: Re: bitcoin.exe/bitcoind.exe on win32 and more than 9 miners Post by: spiccioli on November 21, 2011, 05:20:04 PM I had no problems with 10 miners/about 4Ghash/s with server ip put in DMZ, read some logs, it could be memory failure, overheating cpu, bad NIC, bad NIC drivers, missconfigured router, lack of free space on c: Hi, it always dies inside boost library, I've put a screenshot here https://bitcointalk.org/index.php?topic=51567.msg614525#msg614525 I can't find anything usefull inside log file, this is what it writes Code: MainFrameRepaint It says "cancel: Required operation is not supported by object shown". Best regards. spiccioli. ps. No problems whatsoever with cpu, space on disk, network drivers. Title: Re: bitcoin.exe/bitcoind.exe on win32 and more than 9 miners Post by: jkminkov on November 21, 2011, 11:07:18 PM I was running 0.3.2x something, but 10 to 20 connections is too low, no idea how v0.4.0 is done, but I was getting like at least 50 to 70 at a time
Title: Re: bitcoin.exe/bitcoind.exe on win32 and more than 9 miners Post by: bitlane on December 26, 2011, 05:50:09 AM Does this maybe have something to do with the XP 10 half-open TCP/IP connection limit ?
Apply one of the many available (re-branded LVLord scripts or whatever) TCP/IP Patches and nuke the 10 half-open limit and up it to 100 (or something close to that) and see if that helps. What does your bitcoin.conf file look like ? What is the MAX RPC Connection limit ? RPC Timeout Value ? My 'Solo Server' is also a Windows box, but in Server 2008 32bit flavour and I run 15+ cards, with 2-3 threads per card (using CGMiner) to it without any problems, although it took me some time to fine tune things - but it works great now. Start with the basics above and make sure all bases are covered. Title: Re: bitcoin.exe/bitcoind.exe on win32 and more than 9 miners Post by: spiccioli on December 27, 2011, 02:48:40 PM Does this maybe have something to do with the XP 10 half-open TCP/IP connection limit ? Apply one of the many available (re-branded LVLord scripts or whatever) TCP/IP Patches and nuke the 10 half-open limit and up it to 100 (or something close to that) and see if that helps. What does your bitcoin.conf file look like ? What is the MAX RPC Connection limit ? RPC Timeout Value ? My 'Solo Server' is also a Windows box, but in Server 2008 32bit flavour and I run 15+ cards, with 2-3 threads per card (using CGMiner) to it without any problems, although it took me some time to fine tune things - but it works great now. Start with the basics above and make sure all bases are covered. Hi bitlane, no, it is not the 10 half-open tcp/ip connection limit, I did increase that limit to 256 with no differences at all. You can see my .conf file here: https://bitcointalk.org/index.php?topic=51567.msg614525#msg614525 In the end I installed a linux PC and now everything works ok. Thanks. spiccioli. |