|
Title: Trouble setting up RX 470 rig with simplemining OS and Hive OS - error 0xc000022 Post by: velma on May 27, 2020, 06:50:27 PM I have a rig with Prime z270-a motherboard
I'm putting RX 470 cards on it, but having trouble. For the overclocking in Simplemining OS, I set Core MHz to 1050, Memory MHz to 1950 and Core undervolt to 900. Powerstage is set at 6 and minimum fan speed is 70%. I'm also using two separate power supplies that are linked together. The 1000 watt PSU is running five cards, and a 450 W PSU is operating two cards. When I try just one card with no other cards in a single PCI-E slot, it will drop the wattage to 35W and the heat will spike to 85°C. I had card number one in PCI slot number one and it worked for 24 hours just fine. I try hooking up the first two cards and one of them will drop to 35 W and give me the heat spike. I just hooked up cards 2, 3 and four and had been working fine. I tried number five and received a message saying that my keyboard was not detected and it wouldn't work. I pulled card 5 off and now I'm getting an error 0xc0000225. 2, 3 and 4 cards were working and now it is giving me an error. If I pull the cards off, it goes back to my screen to go to the bios. Just to note: I received this error before when I tried another motherboard. I was also using an SSD drive and was using Hive OS. I switched to another motherboard and a USB and Simplemining OS, but just received this error and having the same issues where wattage drops and the heat spikes. I have also tried just running the 1000 W PSU by itself. I don't know what to do. If anyone has suggestions I would appreciate it. Title: Re: Trouble setting up RX 470 rig with simplemining OS and Hive OS - error 0xc000022 Post by: rikuu on May 28, 2020, 03:10:20 PM is the heat spike always hapening on the same card?
Regarding not being able to connect more than 4 GPUs, is the BIOS option "encode above 4G" enabled? How do you set the voltage on the GPUs? Title: Re: Trouble setting up RX 470 rig with simplemining OS and Hive OS - error 0xc000022 Post by: P00P135 on May 28, 2020, 04:20:50 PM Do you get these errors when you don't OC and undervolting them?
Title: Re: Trouble setting up RX 470 rig with simplemining OS and Hive OS - error 0xc000022 Post by: Broomey on May 28, 2020, 08:36:54 PM Hey. Sorry to hear about your temp and crashing issues.. :(
It does sound hardware related and not software though. I would suggest to strip it right back. I personally use PiMP OS, but that shouldn't matter for this testing. Try booting it with just 1 gpu (not the 35w one) and 1 psu connected. Try making sure you have either the standard Rom, or only PBE One-Click mod ONLY. As rikuu said, ditch the undervolting for now. Tune later. Try a little more conservative setting, maybe 1025 and 1900? I have some 4gb rx470's (Hynix mem), running only PBE1C, 1025, 2025, NO UNDERVOLT, and getting 28.2mh/s@52w on ETH. If you try the above.. run it for a day or 2 to see temps and stability.. then add a card. Slowly slowly.. you'll get to the bottom of it. :) When you do find the issue and your rig's running stable.. then you play a little with undervolting to maximise your return. Best of luck.. happy mining! |