|
Title: Control Multiple Antminer S1s with Minepeon!!! Post by: tripppn on April 06, 2014, 06:19:28 PM Figured it out!!! :D
I've seen other people asking if it's possible and we got it working. So many people have tried using the "--http-port 8330" at the end of the setting code but would only get rejects. Simply change "http" to "stratum" so "--stratum-port 8330" point your antminers at the Pi's IP address with port 8330 and use a different worker name for each S1 and that's it. worker/pw doesn't matter what you use just have a different worker name for each. Hope this helps out someone. Title: Re: Control Multiple Antminer S1s with Minepeon!!! Post by: tripppn on April 07, 2014, 02:50:30 AM Oh... almost forgot... You have to be using the newer firmware on the S1
Title: Re: Control Multiple Antminer S1s with Minepeon!!! Post by: mojacho on April 08, 2014, 02:38:25 PM Where I can get the new firmware for s1?
|