Title: Slush's Pool only shows a quarter of my Hash power! Post by: jasonsteer on May 02, 2014, 09:27:38 AM Hi All
I have a pair of antminers plugged into my pc using bfgminer connecting to slush's pool all is running well at 4Ghash's. i then decided to buy two Antminer u2's and a raspbery pi with mine peon installed (did it yesturday) i also used bfg miner on minepeon, everything is working great showing 4Ghas/s on the Pi. however when i made a second wroker in slush's pool for my new minepeon device it only shows 900 Mhash/s over 24 hours instead of 4000 Mhas/s here is a screen shot of my mine peon: http://www.her-best.co.uk/Images/Capture2.png Here is the screenshot for Slush's Pool: http://www.her-best.co.uk/Images/Capture1.png can anyone tell me if i have done somthing wrong (its wroker 2 BTW) Title: Re: Slush's Pool only shows a quarter of my Hash power! Post by: jasonsteer on May 02, 2014, 09:46:39 AM Ok, I think i may have amade a school boy error. ;D
It may be because my usb hub is not pulling enough amps, i will investigate and report back later. Title: Re: Slush's Pool only shows a quarter of my Hash power! Post by: zetaray on May 02, 2014, 10:45:58 AM Your hashrate is constant, but not all hashes are successful. Pools estimate your hashrate from your successful shares. So, if you are unlucky, your reported hashrate can be a lot lower than your actual hashrate
Title: Re: Slush's Pool only shows a quarter of my Hash power! Post by: GodfatherBond on May 06, 2014, 01:29:58 AM Just wait some time and it give correct number. |