Title: Help me mine optimally with these cards! Post by: ragingazn628 on January 27, 2012, 05:26:28 AM Hey guys,
I've been using CGMiner and it's been great so far. I need help with the drivers / tweaks and what not so I can get the best out of my hardware for the best hashrate possible. I have the following hardware: Phenom II X4 830 Asus Crosshair IV Extreme (5 PCI-E slots) Cooler Master 1300W Hybrid Silent OCZ LE 100GB 7970 5970 5870 6950 6950 I have the following settings for the bat file: Quote cd C:\Users\Bitcoin\Desktop\cgminer-2.1.2-win32 start /affinity 1 cgminer -o pit.deepbit.net:8332 -u xxx -p xxx -v 2 -w 256 -g 4 -k phatk --gpu-memclock 300 --auto-fan --temp-target 69 -I 9 Now as for the drivers I believe I have the following: Catalyst 11.12 OpenGL 6.14.10.11318 - And I don't even know what SDK I have or what I need to use. The amdocl64.dll version is 10.0.831.4 -- I can't tell what SDK version that is. I would appreciate any help if possible! Thanks! Title: Re: Help me mine optimally with these cards! Post by: ssateneth on January 27, 2012, 06:05:14 AM 831.4 is SDK 2.6. It's required for 7970. It is also complete garbage for 5xxx and 6xxx as far as maintaining good mhash/j because fastest 2.6 speeds run best at about 1ghz memory, which consumes a lot of power; You could remedy this by installing 2.1 + 2.6 together, but that also leaves your 6950's high and dry. I'm not sure if its possible to install 2.1 + 2.5 + 2.6 because 2.5 + 2.6 would share the same install location.
Also, currently only DiabloMiner is the only miner that best supports GCN architecture (7970). 11.12/12.1 driver is really your only choice, since any prior versions won't support 7970. Title: Re: Help me mine optimally with these cards! Post by: jake262144 on January 27, 2012, 08:57:15 AM There is a problem with how Windows looks up libraries, though: if one is already present in memory it will be used system-wide by default, without doing any look-ups.
Unfortunately, I have no windows-powered rigs and don't need the downtime required for swapping them hard drives out and dabbling with Windows. Still, I would gladly help if a bounty was offered. Just a handful of Bitcoins if I'm successful, to reimburse me for the downtime-caused revenue loss and the necessity of subjecting my rig to Redmond-based software ;) Interested? Title: Re: Help me mine optimally with these cards! Post by: ragingazn628 on January 27, 2012, 10:34:08 PM How do I know if SDK 2.1 is installed or not? I Installed ati-stream-sdk-v2.1-vista-win7-64.exe from ATI's website.
Title: Re: Help me mine optimally with these cards! Post by: ssateneth on January 28, 2012, 02:34:45 AM How do I know if SDK 2.1 is installed or not? I Installed ati-stream-sdk-v2.1-vista-win7-64.exe from ATI's website. reboot your system first. sometimes 2.1 detection is wonky then run something called gpu caps viewer, google it if you dont 100% know you have it go to opencl tab. the very top dropbox should have 2 options if you have 2 sdks installed. 2.1 is called ATI stream. 2.6 will have a version number of something like 831.4. 2.5 will have like 793 or something, starts with a 7. Title: Re: Help me mine optimally with these cards! Post by: ragingazn628 on January 28, 2012, 04:45:47 AM How do I know if SDK 2.1 is installed or not? I Installed ati-stream-sdk-v2.1-vista-win7-64.exe from ATI's website. reboot your system first. sometimes 2.1 detection is wonky then run something called gpu caps viewer, google it if you dont 100% know you have it go to opencl tab. the very top dropbox should have 2 options if you have 2 sdks installed. 2.1 is called ATI stream. 2.6 will have a version number of something like 831.4. 2.5 will have like 793 or something, starts with a 7. Thanks and CGMiner will auto detect and use SDK 2.1? Title: Re: Help me mine optimally with these cards! Post by: ssateneth on January 28, 2012, 10:37:58 AM How do I know if SDK 2.1 is installed or not? I Installed ati-stream-sdk-v2.1-vista-win7-64.exe from ATI's website. reboot your system first. sometimes 2.1 detection is wonky then run something called gpu caps viewer, google it if you dont 100% know you have it go to opencl tab. the very top dropbox should have 2 options if you have 2 sdks installed. 2.1 is called ATI stream. 2.6 will have a version number of something like 831.4. 2.5 will have like 793 or something, starts with a 7. Thanks and CGMiner will auto detect and use SDK 2.1? No idea, never used it. If its anything like diablominer though, it'll iterate through all opencl platforms and devices, so if you have 4 cards and 2 sdk's, it'll run 8 miners: half on 2.1 sdk and the other half on whatever other sdk you have installed; you'll likely need to specify what platform/devices to use. |