Bitcoin Forum

Alternate cryptocurrencies => Mining (Altcoins) => Topic started by: djm34 on June 19, 2014, 08:07:26 PM



Title: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: djm34 on June 19, 2014, 08:07:26 PM
Hi,

I have released a version of sgminer which allows to mine X11 and X13 coins using 14.6 amd drivers.

As it has been noticed some times ago, with 14.6 drivers almost double the hashrate of groestl algorithm and substantially increases the hashrate of any algo using groestl such as X11, X13, Nist5 (talkcoin).

However with 14.6 drivers some algos (in particular X11 and X13) stopped working completely.
This release fix the problem. This release is based on lasybear sgminer release.

You can find the source at:  https://github.com/djm34/sph-sgminer_x11mod
windows binaries at:  https://mega.co.nz/#!0d9xjagT!H-K3q-XcyHIGEPcPQOKPcW7sdvh8cAaAmHqNRP09zBg


This version supports these kernels (and some others... but need to be checked though)

* X11mod  (-k x11mod)
* X13mod   (-k x13mod)
* Nist5      (-k nist5)   (talkcoin)
* Quark coins (-k quarkcoin)
* Animecoin (-k animecoin )

I didn't modify the original marucoin and darkcoin kernel are they are slower and some improvement on the quark/anime kernel should be expected soon)

In terms of speed, it was tested so far only on my R9 290x:
With X11mod, I get 5.4MHash/s
With X13mod, I get 3.75MHash/s  (which is not terrible compared to nvidia cards)
With Nist5, I get 15.8MHash/s (more details can be found on talkcoin thread)

If you find this work useful please donate at these addresses:  

BTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze
TAC: TuqNvPoQxghHfzwnPpAxSTiYoN6FM8LM5p
DRK: XpeLYbqdqdC6FM51EPT1XsfXRG8TLqXEbe






Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: djm34 on June 19, 2014, 08:36:32 PM
sorry wrong thread...  ;D


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: kqpahv on June 19, 2014, 10:18:04 PM
Great work man  ;) Even though I am not fan of x11 or x13 it's still great to see improvements made to AMD miners  ;)


A R9 280x gets the following numbers:

x11 - 4.05Mhash @ 1080Mhz
x13 - 2.9Mhash  @ 1080Mhz


Energy consumption seems to be the same as before: ~90W per card @ 1020Mhz/ 0.9Mv.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: minerpools on June 19, 2014, 10:36:30 PM
Awesome! I'm updating drivers on my rigs. Thanks man!


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: captainbluff on June 19, 2014, 10:40:26 PM
Has anyone checked for any hidden hash redirect?


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: vindyne8 on June 19, 2014, 11:09:30 PM
Hrmm. Constant spam of cards going idle, waiting for work from pools, work resuming. i am sure I am doing something wrong, I usually am, anyone else having this issue?


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: captainbluff on June 19, 2014, 11:37:19 PM
Hrmm. Constant spam of cards going idle, waiting for work from pools, work resuming. i am sure I am doing something wrong, I usually am, anyone else having this issue?

Yep I get the same messages.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: minerpools on June 19, 2014, 11:47:28 PM
I can confirm they're working (compiled on a modified version of linux), I'm getting 3.8mh for each 280x. It rose from 2.1mh...
Amazing work man!


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: vindyne8 on June 19, 2014, 11:50:32 PM
I can confirm they're working (compiled on a modified version of linux), I'm getting 3.8mh for each 280x. It rose from 2.1mh...
Amazing work man!

Absolutely big hash rate increase. I just need to figure out the work stop/start thing and should be good to go. If I do figure it out, will post it.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: captainbluff on June 20, 2014, 12:58:38 AM
Has anyone checked for any hidden hash redirect?

Anyone???


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: sling00 on June 20, 2014, 02:16:46 AM
Could you post settings for 280x/290 or 290x? Trying my settings that worked well on the original mod miner, not working well on this one.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: ShaDou on June 20, 2014, 02:37:34 AM
run perfect on my rig.thanks for ur great work.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: charmees on June 20, 2014, 05:29:54 AM
is this suppose to have any increase in mining speed also?

r9 270 still getting ~1600kh on x13
                         ~2070kh on x11
same as with previous sgminers


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: marklin on June 20, 2014, 07:16:42 AM
6xxxand5xxx?


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: kozmos on June 20, 2014, 08:30:55 AM
@djm34

Thank you a lot for this great sgminer  :)

I fixed the idle/work resuming problem.

This is the download link for the fixed miner: https://mega.co.nz/#!ZsJTALQI!qDh9jCWULjabTDPYq0K4fZamdZrPwot7m7AAfTEOJPQ (https://mega.co.nz/#!ZsJTALQI!qDh9jCWULjabTDPYq0K4fZamdZrPwot7m7AAfTEOJPQ)


I also opened a new thread (just in case) some will not notice this comment and the fixed version of the miner: https://bitcointalk.org/index.php?topic=658975.msg7412560#msg7412560


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: Kablam on June 20, 2014, 09:18:41 AM
@kozmos

sounds great that you fixed it can you let us know what you did or just add the fix it to the github repository so linux users like me can get it running? ;)

thx

Kablam


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: Kablam on June 20, 2014, 09:37:42 AM
@djm34

nice work man.

can you please share your 290x settings? i have a 290x tri-x and a 290 tri-x and im not getting the same performance as you im getting 5k on the 290x.

first card is a 290 second 290x

http://i.imgur.com/fVqLE56.png


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: ShXnot on June 20, 2014, 09:46:29 AM
hey guys,
anyone care to share setting for 7950 and 280x please
thanks in advance


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: kozmos on June 20, 2014, 09:53:44 AM
@kozmos

sounds great that you fixed it can you let us know what you did or just add the fix it to the github repository so linux users like me can get it running? ;)

thx

Kablam
you are welcome :)

I did nothing more than adding the latest AMD_APP_SDK 2.9, used the exact github source djm34 mentioned in his first post, recompiled the miner and made sure it supports AMD OpenCL.



Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: kozmos on June 20, 2014, 09:59:16 AM
hey guys,
anyone care to share setting for 7950 and 280x please
thanks in advance

Try this: http://pastebin.com/4vS1gw8e


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: Kablam on June 20, 2014, 10:07:22 AM
@kozmos

ok thx man then i dont have think more about that ;)

runns fine on pimp for me with 14.6 drivers


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: djm34 on June 20, 2014, 10:35:32 AM
@kozmos

sounds great that you fixed it can you let us know what you did or just add the fix it to the github repository so linux users like me can get it running? ;)

thx

Kablam
you are welcome :)

I did nothing more than adding the latest AMD_APP_SDK 2.9, used the exact github source djm34 mentioned in his first post, recompiled the miner and made sure it supports AMD OpenCL.

ok thanks, that's certainly mean I need to check my mingw install... (I have installed several other packages for compiling other stuffs, I will have to check that)


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: kozmos on June 20, 2014, 10:48:07 AM
@kozmos

sounds great that you fixed it can you let us know what you did or just add the fix it to the github repository so linux users like me can get it running? ;)

thx

Kablam
you are welcome :)

I did nothing more than adding the latest AMD_APP_SDK 2.9, used the exact github source djm34 mentioned in his first post, recompiled the miner and made sure it supports AMD OpenCL.

ok thanks, that's certainly mean I need to check my mingw install... (I have installed several other packages for compiling other stuffs, I will have to check that)
Thanks to you in the first place..

btw I noticed something about 14.6bta driver, the GPU and Memory frequencies remain the same (default card's values) whatever you try to play with it via msi afterburner or directly within the miner conf. file.

It is me or is it a general thing with this driver??


Edit: the hashrate is the same at any given GPU/Memery value.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: ShXnot on June 20, 2014, 12:31:45 PM
hey guys,
anyone care to share setting for 7950 and 280x please
thanks in advance

Try this: http://pastebin.com/4vS1gw8e
thanks mate  :)


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: dark8011 on June 20, 2014, 12:39:21 PM
will U please come up with a miner which can improve 5xxx/6xxx AMD cards?
thanks a lot


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: becker on June 20, 2014, 12:50:49 PM
Anyone have good 7970 settings tried the 7950, and 280x settings given in the pastebin above, but crashes.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: thefrog on June 20, 2014, 01:19:55 PM
Linux version, build from source, with the Latest beta linux drivers and the modded sph-sgminer, and the latest ADL-SDK work too.

from 3.2 to 4.1 per 280x with same config.



Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: thedeath89 on June 20, 2014, 02:03:59 PM
this is no use for r9 270/270x , right ?


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: barryzand on June 20, 2014, 02:10:40 PM
will U please come up with a miner which can improve 5xxx/6xxx AMD cards?
thanks a lot

big fat +1... Im not getting more hashes then with the lasybear version and the old drivers...

running 10x 5870 and 5x 6950.. would be nice if you can fix one for us  :)


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: oktay50000 on June 20, 2014, 03:22:16 PM
any guide for installing this sgminer  on pimp??


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: Pelk on June 20, 2014, 03:32:15 PM
Working great for me thx to geren27 and djm34 :P

http://i.imgur.com/BJm3lyG.png


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: Anonymousg64 on June 20, 2014, 09:26:02 PM
crashes gpu driver then pc hangs

2x Powercolor r9 290 PCS+

running windows 7 32bit
AMD APP SDK 2.9
AMD driver 14.6

sgminer.conf
Code:
"intensity" : "19",
"vector" : "2",
"worksize" : "512",
"kernel" : "x13mod",
"lookup-gap" : "0",
"thread-concurrency" : "24550",
"gpu-engine" : "1050, 1030",
"gpu-memclock" : "1500",
"gpu-powertune" : "20",
"gpu-vddc" : "0",
"gpu-threads" : "1",
"gpu-fan" : "100"


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: fra55 on June 20, 2014, 09:51:37 PM
Well man I got a lot of errors with this miner...

1- Failed to resolve Address:Port (never happened before)

2- Getaddrinfo in setup_Stratum_socket<> returned 10109: impossible to find the specified class

3- I can only make one card to work (card n.1, an Asus 280x) and not my card n.0 (Amd 6850), with sphsgminer both cards were working

It seems like the miner does not read my .bat file, which is:

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
setx DISPLAY 0
sgminer -k x11mod -o stratum+tcp://drkpool.com:3333 -u fra55.1 -p x -I 18,17 -w 128,256 -g 1,2 --shaders 960,2048 --no-submit-stale --lookup-gap 2,2

What's wrong? No hashrate increase was noticed


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: -Blueraiven- on June 20, 2014, 11:07:09 PM
this is no use for r9 270/270x , right ?

Yes tried it on 270x too.. No increase on hashrate.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: shadow3277 on June 20, 2014, 11:10:54 PM
this is no use for r9 270/270x , right ?

Yes tried it on 270x too.. No increase on hashrate.

Are you guys running the 14.6 drivers? I received an increase of +1Mhs on my 270x's running x11.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: fortheson on June 20, 2014, 11:13:22 PM
is this work for 7850?


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: SolarFox on June 20, 2014, 11:58:41 PM
this is no use for r9 270/270x , right ?

Yes tried it on 270x too.. No increase on hashrate.

No increase in speed at all...  280x


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: 42davidsmith42 on June 21, 2014, 12:11:42 AM
@kozmos

ok thx man then i dont have think more about that ;)

runns fine on pimp for me with 14.6 drivers

How did you get 14.6 drivers on pimp? I thought the latest only comes with 14.4


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: Madcat71 on June 21, 2014, 12:29:41 AM
How did u get it into PiMP, have 2 riggs one win7 with 280Xś and 1 with 4 290ś and PiMP, no problems with the new drivers on win7, but i have no clue how to get it running on Pimp ( latest version 14,4 )


@djm34

nice work man.

can you please share your 290x settings? i have a 290x tri-x and a 290 tri-x and im not getting the same performance as you im getting 5k on the 290x.

first card is a 290 second 290x

http://i.imgur.com/fVqLE56.png




Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: lobo13hf on June 21, 2014, 12:32:39 AM
Can anyone share the settings for 290s non x??? X11/X13...


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: 42davidsmith42 on June 21, 2014, 12:41:55 AM
How did u get it into PiMP, have 2 riggs one win7 with 280Xś and 1 with 4 290ś and PiMP, no problems with the new drivers on win7, but i have no clue how to get it running on Pimp ( latest version 14,4 )


@djm34

nice work man.

can you please share your 290x settings? i have a 290x tri-x and a 290 tri-x and im not getting the same performance as you im getting 5k on the 290x.

first card is a 290 second 290x

http://i.imgur.com/fVqLE56.png




What settings are you running to get 4500kh on a 290? I'm struggling to get 3500.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: wmr1988 on June 21, 2014, 02:21:56 AM
Weird......

I tried 14.4 AND 14.6 beta on
MSI 7850, on Windows 8.0 - Not a single bit of performance increase vs. sphminer mod

Anyone know what's the problem?


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: 42davidsmith42 on June 21, 2014, 02:30:27 AM
Weird......

I tried 14.4 AND 14.6 beta on
MSI 7850, on Windows 8.0 - Not a single bit of performance increase vs. sphminer mod

Anyone know what's the problem?

Did you delete and recreate the .bin files?


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: wmr1988 on June 21, 2014, 02:58:31 AM
Weird......

I tried 14.4 AND 14.6 beta on
MSI 7850, on Windows 8.0 - Not a single bit of performance increase vs. sphminer mod

Anyone know what's the problem?

Did you delete and recreate the .bin files?

Wuh Im on windows. I thought the installer just overwrites the files.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: MTJ151 on June 21, 2014, 04:50:24 AM
Well, tried it out on 14.6 driver and was getting accepted shares. Which I was not woth any other version of sgminer with 14.6

However, it appears that there maybe a problem with the drivers because if you check GPU-Z you will notice that the clock speeds don't change meaning you always running on default clocks.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: jakecrow on June 21, 2014, 05:00:19 AM
So 14.6 drivers seem to lock clock speeds for some people (not me, who knows why). If you tried 14.6 and your clocks are locked I have a very easy fix for you. The bins I created below are made with 14.6 drivers, but will work fine with 14.4 installed. So, keep using (or revert to) 14.4, download this new miner, copy these bins into its folder and you should be good to go. Note these are standard settings, 8192 TC, 256 worksize, etc. These were made for a 280x, sorry I have no other cards to make bins with but some other nice person out there with other cards can do that.

Anyways link here (it's just the bins, don't worry):

https://mega.co.nz/#!5ZZ3QATZ!Tw3htWW-b-rCK0K8q9zC3Gd5eMqY5VSXS4hD4fUgYfg (https://mega.co.nz/#!5ZZ3QATZ!Tw3htWW-b-rCK0K8q9zC3Gd5eMqY5VSXS4hD4fUgYfg)

Thanks a lot for your work on this new miner. I haven't run it long yet but the speed improvement is real. ~4.3 on X11 and ~3.1 on X13, for a 280x.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: mika1977 on June 21, 2014, 07:47:45 AM
this bin for R270 https://dl.dropboxusercontent.com/u/58576741/x11modPitcairnglg2tc8128w256l4.bin (https://dl.dropboxusercontent.com/u/58576741/x11modPitcairnglg2tc8128w256l4.bin) work fine with me 40% up


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: thefrog on June 21, 2014, 07:59:51 AM
this is no use for r9 270/270x , right ?

Yes tried it on 270x too.. No increase on hashrate.

No increase in speed at all...  280x

are you sure you run 14.6 (or latest beta on linux ?)

+1MHs / 280x on my side. and Server sees it too.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: thefrog on June 21, 2014, 08:01:43 AM
Weird......

I tried 14.4 AND 14.6 beta on
MSI 7850, on Windows 8.0 - Not a single bit of performance increase vs. sphminer mod

Anyone know what's the problem?

Did you delete and recreate the .bin files?

Wuh Im on windows. I thought the installer just overwrites the files.

The .bin files are created on start of sgminer. you should delete them (I do delete them prior to sgminer start everytime).


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: bullus on June 21, 2014, 08:16:10 AM
So 14.6 drivers seem to lock clock speeds for some people (not me, who knows why). If you tried 14.6 and your clocks are locked I have a very easy fix for you. The bins I created below are made with 14.6 drivers, but will work fine with 14.4 installed. So, keep using (or revert to) 14.4, download this new miner, copy these bins into its folder and you should be good to go. Note these are standard settings, 8192 TC, 256 worksize, etc. These were made for a 280x, sorry I have no other cards to make bins with but some other nice person out there with other cards can do that.

Anyways link here (it's just the bins, don't worry):

https://mega.co.nz/#!5ZZ3QATZ!Tw3htWW-b-rCK0K8q9zC3Gd5eMqY5VSXS4hD4fUgYfg (https://mega.co.nz/#!5ZZ3QATZ!Tw3htWW-b-rCK0K8q9zC3Gd5eMqY5VSXS4hD4fUgYfg)

Thanks a lot for your work on this new miner. I haven't run it long yet but the speed improvement is real. ~4.3 on X11 and ~3.1 on X13, for a 280x.

Thanks, will test the bins for x13 7950, should be the same as 280x(256,8192) i think.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: wmr1988 on June 21, 2014, 08:39:27 AM
Weird......

I tried 14.4 AND 14.6 beta on
MSI 7850, on Windows 8.0 - Not a single bit of performance increase vs. sphminer mod

Anyone know what's the problem?

Did you delete and recreate the .bin files?

Wuh Im on windows. I thought the installer just overwrites the files.

The .bin files are created on start of sgminer. you should delete them (I do delete them prior to sgminer start everytime).

Yes I've deleted them. I tried both 14.4 and 14.6 beta but for some strange reason, it gives almost the EXACT hashrate as the last sph-sgminer with x11-mod kernal.



Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: cryptoangel on June 21, 2014, 08:41:36 AM
Weird......

I tried 14.4 AND 14.6 beta on
MSI 7850, on Windows 8.0 - Not a single bit of performance increase vs. sphminer mod

Anyone know what's the problem?

Did you delete and recreate the .bin files?

Wuh Im on windows. I thought the installer just overwrites the files.

The .bin files are created on start of sgminer. you should delete them (I do delete them prior to sgminer start everytime).

Yes I've deleted them. I tried both 14.4 and 14.6 beta but for some strange reason, it gives almost the EXACT hashrate as the last sph-sgminer with x11-mod kernal.



Yeah, I also got no improvement on my 280x.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: Walrusbonzo on June 21, 2014, 08:43:22 AM
Windows 8.1 here with a 7950.

Went from 2.6MH/s to 3.6MH/s.  ;D


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: -Blueraiven- on June 21, 2014, 08:44:58 AM
Do 14.6 drivers capable to run 6 GPU's in win8.1? I've already tried to install but only 5 GPU's are running okay, can't get rid of code 43 error for the 6th gpu. Any clue?


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: atp1916 on June 21, 2014, 08:54:54 AM
Do 14.6 drivers capable to run 6 GPU's in win8.1? I've already tried to install but only 5 GPU's are running okay, can't get rid of code 43 error for the 6th gpu. Any clue?

https://litecointalk.org/index.php?topic=11761.0

Link doesn't appear to be working for the 14.6 modded .infs.  Perhaps someone will come along with a mirror.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: Dowper on June 21, 2014, 08:59:33 AM
this bin for R270 https://dl.dropboxusercontent.com/u/58576741/x11modPitcairnglg2tc8128w256l4.bin (https://dl.dropboxusercontent.com/u/58576741/x11modPitcairnglg2tc8128w256l4.bin) work fine with me 40% up

2850KH/s with this .bin and 14.4 drivers. 30% improvement for me, with the old miner - 2200KH/s.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: cryptoangel on June 21, 2014, 09:06:43 AM
Anyone have a .bin file for HD 6970 currently getting 1.6mhs.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: Eastwind on June 21, 2014, 09:20:28 AM
So 14.6 drivers seem to lock clock speeds for some people (not me, who knows why). If you tried 14.6 and your clocks are locked I have a very easy fix for you. The bins I created below are made with 14.6 drivers, but will work fine with 14.4 installed. So, keep using (or revert to) 14.4, download this new miner, copy these bins into its folder and you should be good to go. Note these are standard settings, 8192 TC, 256 worksize, etc. These were made for a 280x, sorry I have no other cards to make bins with but some other nice person out there with other cards can do that.

Anyways link here (it's just the bins, don't worry):

https://mega.co.nz/#!5ZZ3QATZ!Tw3htWW-b-rCK0K8q9zC3Gd5eMqY5VSXS4hD4fUgYfg (https://mega.co.nz/#!5ZZ3QATZ!Tw3htWW-b-rCK0K8q9zC3Gd5eMqY5VSXS4hD4fUgYfg)

Thanks a lot for your work on this new miner. I haven't run it long yet but the speed improvement is real. ~4.3 on X11 and ~3.1 on X13, for a 280x.

I used this bin and it increase my 7970 card hash rate from 2500 to 3200MH/s.

Is it possible for you to create a X13 bin?


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: gmerk on June 21, 2014, 09:55:07 AM

This worked for me:
14.4 or previous -> DDU -> 14.6 -> make your .bins (lots of them  :) ) -> DDU -> 14.4 -> enjoy...

I use a 7790 (seven-seven-nine-zero, a bit weak I know, but only ~70W).
With 14.6 it went from 1.2MH/s to 1.8MH/s but with locked memory clock (core clock not locked).
I removed 14.6, kept the .bin files, reinstalled 14.4 and everything is fine.
If I recreate the .bin with 14.4 I get my old low hashrates again...

Yesterday, someone said something about putting 14.6 opencl files (dlls?) in sgminer folder, and then compile the bin files (start sgminer).
I tried a bit, but couldn't figure it out...



Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: barryzand on June 21, 2014, 10:16:34 AM
I really would like a version wich helps improvement on the HD5xxx and HD6xxx cards....  ::)


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: majkel_94 on June 21, 2014, 10:18:59 AM
I really would like a version wich helps improvement on the HD5xxx and HD6xxx cards....  ::)
Have you tried installing 14.6 beta drivers and they compiling bins for 5xxx? ;)

I have this cards too but my rig is far far away, so I can't install drivers remote and I'm waiting for Cypress and Juniper bins :P


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: hero18688 on June 21, 2014, 10:25:17 AM
Can you add jackpot coin kernel and tweak it ;) Right now it looks terrible compared to 750ti


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: nicquehen on June 21, 2014, 10:27:42 AM
I would like too for jackpot :)


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: hero18688 on June 21, 2014, 10:43:05 AM
I see waiting and resuming message times with this version.Did you guys  see that?
http://i.imgur.com/kXLyVcU.png


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: shadow3277 on June 21, 2014, 10:45:13 AM
I see waiting and resuming message times with this version.Did you guys  see that?
http://i.imgur.com/kXLyVcU.png

There's a re-compiled version that fixes it.

https://bitcointalk.org/index.php?topic=658975.0


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: barryzand on June 21, 2014, 11:01:24 AM
I really would like a version wich helps improvement on the HD5xxx and HD6xxx cards....  ::)
Have you tried installing 14.6 beta drivers and they compiling bins for 5xxx? ;)

I have this cards too but my rig is far far away, so I can't install drivers remote and I'm waiting for Cypress and Juniper bins :P

already did of course... no increase compared too lasybears version on 14.4


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: djm34 on June 21, 2014, 11:03:18 AM
I would like too for jackpot :)
actually I am working on it, however the result isn't that good at the moment.
However using the current jackpot-miner with 14.6 drivers gives already a little boost

by the way I have updated the op with a windows binaries which works correctly.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: jakecrow on June 21, 2014, 12:05:24 PM
So 14.6 drivers seem to lock clock speeds for some people (not me, who knows why). If you tried 14.6 and your clocks are locked I have a very easy fix for you. The bins I created below are made with 14.6 drivers, but will work fine with 14.4 installed. So, keep using (or revert to) 14.4, download this new miner, copy these bins into its folder and you should be good to go. Note these are standard settings, 8192 TC, 256 worksize, etc. These were made for a 280x, sorry I have no other cards to make bins with but some other nice person out there with other cards can do that.

Anyways link here (it's just the bins, don't worry):

https://mega.co.nz/#!5ZZ3QATZ!Tw3htWW-b-rCK0K8q9zC3Gd5eMqY5VSXS4hD4fUgYfg (https://mega.co.nz/#!5ZZ3QATZ!Tw3htWW-b-rCK0K8q9zC3Gd5eMqY5VSXS4hD4fUgYfg)

Thanks a lot for your work on this new miner. I haven't run it long yet but the speed improvement is real. ~4.3 on X11 and ~3.1 on X13, for a 280x.

I used this bin and it increase my 7970 card hash rate from 2500 to 3200MH/s.

Is it possible for you to create a X13 bin?

It's already in there :)


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: cryptoangel on June 21, 2014, 12:28:48 PM
I see waiting and resuming message times with this version.Did you guys  see that?
http://i.imgur.com/kXLyVcU.png

Yeah, I also keep getting that. Any update fix DJM34?.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: Kablam on June 21, 2014, 12:30:58 PM
How did u get it into PiMP, have 2 riggs one win7 with 280Xś and 1 with 4 290ś and PiMP, no problems with the new drivers on win7, but i have no clue how to get it running on Pimp ( latest version 14,4 )


@djm34

nice work man.

can you please share your 290x settings? i have a 290x tri-x and a 290 tri-x and im not getting the same performance as you im getting 5k on the 290x.

first card is a 290 second 290x

http://i.imgur.com/fVqLE56.png




Im using pimp 1.5.51-14.6b testing if you go to #PiMP on freenode irc and ask for the testing image someone will give you a dl link
im one of the testers...

Kablam


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: Kablam on June 21, 2014, 12:37:43 PM
How did u get it into PiMP, have 2 riggs one win7 with 280Xś and 1 with 4 290ś and PiMP, no problems with the new drivers on win7, but i have no clue how to get it running on Pimp ( latest version 14,4 )


@djm34

nice work man.

can you please share your 290x settings? i have a 290x tri-x and a 290 tri-x and im not getting the same performance as you im getting 5k on the 290x.

first card is a 290 second 290x

http://i.imgur.com/fVqLE56.png




What settings are you running to get 4500kh on a 290? I'm struggling to get 3500.

ok i tweaked my cards a little more and this is what i get now
http://i.imgur.com/N00UhpT.png

the cards are sapphire tri-xes and im using TC 10240 for the 290 and 11264 for the 290x
rawintensity 131072 g2 w 128 gpucore 1050 memmory 1100 to get what ou see on the smal pic above

Kablam


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: djm34 on June 21, 2014, 12:52:49 PM

[/quote]
I see waiting and resuming message times with this version.Did you guys  see that?
http://i.imgur.com/kXLyVcU.png

Yeah, I also keep getting that. Any update fix DJM34?.
The binaries were updated in the OP today and they should get rid of this problem


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: restless on June 21, 2014, 12:58:08 PM
On 5850 and 6970 there is improvement with 14.6 opencl files
5850 now makes 900+KH on x13, 6970 is above 1400.
I used the version from https://bitcointalk.org/index.php?topic=658975.0, initially I reported no speed up, but I had messed bat/conf files.
Tested under 13.12 with opencl files from 14.6 copied into sgminer folder and deleting all bins


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: intotherain on June 21, 2014, 01:14:46 PM
got 4.400 my r9 280x toxic. thank you. :-*


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: aadje93 on June 21, 2014, 01:37:37 PM
got zlib1.dll missing error on 14.4 In the other thread 14.4 whql is anounced, i downloaded the 14.4 on normal amd driver site so i suppose its the whql version.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: ticoti on June 21, 2014, 03:27:35 PM
great,my hashrate increased, but i don't really know if WU has increased effectively too


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: BITCOINDENMARK on June 21, 2014, 04:05:47 PM
got 4.400 my r9 280x toxic. thank you. :-*

Is that on windows 32 or 64 ?  (Does it mater, using 32/64?)


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: gmerk on June 21, 2014, 04:11:39 PM
On 5850 and 6970 there is improvement with 14.6 opencl files
5850 now makes 900+KH on x13, 6970 is above 1400.
I used the version from https://bitcointalk.org/index.php?topic=658975.0, initially I reported no speed up, but I had messed bat/conf files.
Tested under 13.12 with opencl files from 14.6 copied into sgminer folder and deleting all bins

I found the opencl files in AMD folder inside \Packages\Drivers\Display\WB6A_INF\B171094 (after decompressing the 14.6 driver package without installing it, or with 7zip)
I don't know which are needed, so I copied everything that had "opencl" or "amdocl" in the filename into the sgminer folder (8 files, dlls & exes).
Deleted all previous bins, and now it's even better (+3%) than using the bins from 14.6 (I have 14.4 drivers installed).





Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: BITCOINDENMARK on June 21, 2014, 04:18:05 PM
On 5850 and 6970 there is improvement with 14.6 opencl files
5850 now makes 900+KH on x13, 6970 is above 1400.
I used the version from https://bitcointalk.org/index.php?topic=658975.0, initially I reported no speed up, but I had messed bat/conf files.
Tested under 13.12 with opencl files from 14.6 copied into sgminer folder and deleting all bins

What/where are the opencl files ? - I would like to try the same  :)


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: ClutchThese on June 21, 2014, 04:55:02 PM
Hi,

I have released a version of sgminer which allows to mine X11 and X13 coins using 14.6 amd drivers.

As it has been noticed some times ago, with 14.6 drivers almost double the hashrate of groestl algorithm and substantially increases the hashrate of any algo using groestl such as X11, X13, Nist5 (talkcoin).

However with 14.6 drivers some algos (in particular X11 and X13) stopped working completely.
This release fix the problem. This release is based on lasybear sgminer release.

You can find the source at:  https://github.com/djm34/sph-sgminer_x11mod
windows binaries at:  https://mega.co.nz/#!hZUAzQDQ!GrLynWXGP5wFIiDmFpXnTiXV-AI_bkXEFfQrJpbwF1o

This version supports these kernels (and some others... but need to be checked though)

* X11mod  (-k x11mod)
* X13mod   (-k x13mod)
* Nist5      (-k nist5)   (talkcoin)
* Quark coins (-k quarkcoin)
* Animecoin (-k animecoin )

I didn't modify the original marucoin and darkcoin kernel are they are slower and some improvement on the quark/anime kernel should be expected soon)

In terms of speed, it was tested so far only on my R9 290x:
With X11mod, I get 5.4MHash/s
With X13mod, I get 3.75MHash/s  (which is not terrible compared to nvidia cards)
With Nist5, I get 15.8MHash/s (more details can be found on talkcoin thread)

If you find this work useful please donate at these addresses:  

BTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze
TAC: TuqNvPoQxghHfzwnPpAxSTiYoN6FM8LM5p
DRK: XpeLYbqdqdC6FM51EPT1XsfXRG8TLqXEbe






is the link broken? i can't download this miner....


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: cryptoangel on June 21, 2014, 04:58:42 PM

Anyone know any steps to get my 6970 hashing faster on X11?, currently at 1.6mhs.

Link looks down.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: ClutchThese on June 21, 2014, 04:59:42 PM
https://mega.co.nz/#!hZUAzQDQ!GrLynWXGP5wFIiDmFpXnTiXV-AI_bkXEFfQrJpbwF1o (https://mega.co.nz/#!hZUAzQDQ!GrLynWXGP5wFIiDmFpXnTiXV-AI_bkXEFfQrJpbwF1o)

Works fine.

Anyone know any steps to get my 6970 hashing faster on X11?, currently at 1.6mhs.

All i'm getting is a black ball with 4 white dots going round and round.... nothing ever downloads.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: cryptoangel on June 21, 2014, 05:00:28 PM
https://mega.co.nz/#!hZUAzQDQ!GrLynWXGP5wFIiDmFpXnTiXV-AI_bkXEFfQrJpbwF1o (https://mega.co.nz/#!hZUAzQDQ!GrLynWXGP5wFIiDmFpXnTiXV-AI_bkXEFfQrJpbwF1o)

Works fine.

Anyone know any steps to get my 6970 hashing faster on X11?, currently at 1.6mhs.

All i'm getting is a black ball with 4 white dots going round and round.... nothing ever downloads.


Yeah i got that after a while, just deleted that comment :).


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: oktay50000 on June 21, 2014, 05:40:16 PM
updated github too? fixed for linux?


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: thcmakaveli on June 21, 2014, 05:43:13 PM
The link doesnt work for me as well  ???


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: oktay50000 on June 21, 2014, 05:45:20 PM
@djm34

Thank you a lot for this great sgminer  :)

I fixed the idle/work resuming problem.

This is the download link for the fixed miner: https://mega.co.nz/#!ZsJTALQI!qDh9jCWULjabTDPYq0K4fZamdZrPwot7m7AAfTEOJPQ (https://mega.co.nz/#!ZsJTALQI!qDh9jCWULjabTDPYq0K4fZamdZrPwot7m7AAfTEOJPQ)


I also opened a new thread (just in case) some will not notice this comment and the fixed version of the miner: https://bitcointalk.org/index.php?topic=658975.msg7412560#msg7412560

where can i find linux version of fixed miner?


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: restless on June 21, 2014, 06:43:44 PM
On 5850 and 6970 there is improvement with 14.6 opencl files
5850 now makes 900+KH on x13, 6970 is above 1400.
I used the version from https://bitcointalk.org/index.php?topic=658975.0, initially I reported no speed up, but I had messed bat/conf files.
Tested under 13.12 with opencl files from 14.6 copied into sgminer folder and deleting all bins

What/where are the opencl files ? - I would like to try the same  :)
as in post above
Quote
I found the opencl files in AMD folder inside \Packages\Drivers\Display\WB6A_INF\B171094 (after decompressing the 14.6 driver package without installing it, or with 7zip)
I don't know which are needed, so I copied everything that had "opencl" or "amdocl" in the filename into the sgminer folder (8 files, dlls & exes).


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: Vampiro4L on June 21, 2014, 07:41:28 PM
can somebody write up complete instructions how to upgrade bamt 1.6 to this version?


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: binkshurts on June 21, 2014, 07:48:43 PM
This makes nvidia irrelevant again


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: barryzand on June 21, 2014, 08:06:43 PM
On 5850 and 6970 there is improvement with 14.6 opencl files
5850 now makes 900+KH on x13, 6970 is above 1400.
I used the version from https://bitcointalk.org/index.php?topic=658975.0, initially I reported no speed up, but I had messed bat/conf files.
Tested under 13.12 with opencl files from 14.6 copied into sgminer folder and deleting all bins

What/where are the opencl files ? - I would like to try the same  :)
as in post above
Quote
I found the opencl files in AMD folder inside \Packages\Drivers\Display\WB6A_INF\B171094 (after decompressing the 14.6 driver package without installing it, or with 7zip)
I don't know which are needed, so I copied everything that had "opencl" or "amdocl" in the filename into the sgminer folder (8 files, dlls & exes).


I will try this in a few hours... thnx for sharing


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: bullus on June 21, 2014, 08:15:43 PM
On 5850 and 6970 there is improvement with 14.6 opencl files
5850 now makes 900+KH on x13, 6970 is above 1400.
I used the version from https://bitcointalk.org/index.php?topic=658975.0, initially I reported no speed up, but I had messed bat/conf files.
Tested under 13.12 with opencl files from 14.6 copied into sgminer folder and deleting all bins

What/where are the opencl files ? - I would like to try the same  :)
as in post above
Quote
I found the opencl files in AMD folder inside \Packages\Drivers\Display\WB6A_INF\B171094 (after decompressing the 14.6 driver package without installing it, or with 7zip)
I don't know which are needed, so I copied everything that had "opencl" or "amdocl" in the filename into the sgminer folder (8 files, dlls & exes).


I will try this in a few hours... thnx for sharing

For me it was C:\AMD\AMD-Catalyst-14.6-Beta-V1.0-Windows-May23\Packages\Drivers\Display\WB6A_INF\B172153 and copied the 8 files, but no increase 6970.
Am I not using the correct beta drivers?


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: ClutchThese on June 21, 2014, 08:27:01 PM
can anyone write instructions on how to download the miner? :/

dat mega upload is OP... i can't figure it out.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: oktay50000 on June 21, 2014, 08:37:29 PM
still getting waiting frrom pools ???


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: volodzya on June 21, 2014, 08:46:30 PM
On 5850 and 6970 there is improvement with 14.6 opencl files
5850 now makes 900+KH on x13, 6970 is above 1400.
I used the version from https://bitcointalk.org/index.php?topic=658975.0, initially I reported no speed up, but I had messed bat/conf files.
Tested under 13.12 with opencl files from 14.6 copied into sgminer folder and deleting all bins

I found the opencl files in AMD folder inside \Packages\Drivers\Display\WB6A_INF\B171094 (after decompressing the 14.6 driver package without installing it, or with 7zip)
I don't know which are needed, so I copied everything that had "opencl" or "amdocl" in the filename into the sgminer folder (8 files, dlls & exes).
Deleted all previous bins, and now it's even better (+3%) than using the bins from 14.6 (I have 14.4 drivers installed).





hi @qmerk , @restless

I have 14.4, took 8 files ( amd_opencl32.dll, amd_opencl64.dll, amdocl.dll, amdocl_as32.exe, amdocl_as64.exe, amdocl_ld32.exe, amdocl_ld64.exe, amdocl64.dll) from 14.6 and put into sgminer folder, but no gain compared to lazybear's release in mining x11. tried few of the sgminer versions produced by djm34, including the initial one on the first page of the thread.

Could you please dump your sgminer config or command line parameters, whichever may be relevant.
Or if possible, could you also share the bin files generated by sgminer.

p.s. with lazybear's release & 14.4 driver & opencl files I get around 2180 kh/s mining x11 per each slightly overclocked 6970, have few of these in the rig.

Code:
{
"kernel" : "x11mod",
"intensity" : "21",
"worksize" : "128",
"lookup-gap" : "2"
}


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: bullus on June 21, 2014, 08:51:52 PM
On 5850 and 6970 there is improvement with 14.6 opencl files
5850 now makes 900+KH on x13, 6970 is above 1400.
I used the version from https://bitcointalk.org/index.php?topic=658975.0, initially I reported no speed up, but I had messed bat/conf files.
Tested under 13.12 with opencl files from 14.6 copied into sgminer folder and deleting all bins

I found the opencl files in AMD folder inside \Packages\Drivers\Display\WB6A_INF\B171094 (after decompressing the 14.6 driver package without installing it, or with 7zip)
I don't know which are needed, so I copied everything that had "opencl" or "amdocl" in the filename into the sgminer folder (8 files, dlls & exes).
Deleted all previous bins, and now it's even better (+3%) than using the bins from 14.6 (I have 14.4 drivers installed).





hi @qmerk , @restless

I have 14.4, took 8 files ( amd_opencl32.dll, amd_opencl64.dll, amdocl.dll, amdocl_as32.exe, amdocl_as64.exe, amdocl_ld32.exe, amdocl_ld64.exe, amdocl64.dll) from 14.6 and put into sgminer folder, but no gain compared to lazybear's release in mining x11. tried few of the sgminer versions produced by djm34, including the initial one on the first page of the thread.

Could you please dump your sgminer config or command line parameters, whichever may be relevant.
Or if possible, could you also share the bin files generated by sgminer.

p.s. with lazybear's release & 14.4 driver & opencl files I get around 2180 kh/s mining x11 per each slightly overclocked 6970, have few of these in the rig.

Code:
{
"kernel" : "x11mod",
"intensity" : "21",
"worksize" : "128",
"lookup-gap" : "2"
}

What clocks is your 6970 running at?

950/1375 ~2300kh/s with an older binfile..no increase seen with the new 14.6miner and or cl files


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: volodzya on June 21, 2014, 08:56:23 PM
Quote

What clocks is your 6970 running at?

950/1375 ~2300kh/s with an older binfile..no increase seen with the new 14.6miner and or cl files

899/1399 :)


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: oktay50000 on June 21, 2014, 09:03:05 PM
you guys are okay?
are you getting waiting for work from pools with fixed version??
its annoying when it wants to start
i need to restart sgminer several times to get it to work
some times getting black screen on miner too ???


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: rudarSRB on June 21, 2014, 09:04:29 PM
Works like a charm ;)


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: smtn512 on June 21, 2014, 09:06:54 PM



I found the opencl files in AMD folder inside \Packages\Drivers\Display\WB6A_INF\B171094 (after decompressing the 14.6 driver package without installing it, or with 7zip)
I don't know which are needed, so I copied everything that had "opencl" or "amdocl" in the filename into the sgminer folder (8 files, dlls & exes).
Deleted all previous bins, and now it's even better (+3%) than using the bins from 14.6 (I have 14.4 drivers installed).

Did this... 14.4 drivers with 14.6 opencl files in sgminer folder. Msi 7790s up from 1.17mh to 1.62mh. Sapphire 270s up from 2mh to 2.72mh. If anyone is interested in my configs I'll post them upon request.

I use a 7790 (seven-seven-nine-zero, a bit weak I know, but only ~70W).
With 14.6 it went from 1.2MH/s to 1.8MH/s but with locked memory clock (core clock not locked).
I removed 14.6, kept the .bin files, reinstalled 14.4 and everything is fine.
If I recreate the .bin with 14.4 I get my old low hashrates again...



Yes these little things are great power savers, and they run so cool...wish I had bought more last December when they were .1btc each. I'm very curious to know whats in your 1.8mh config...


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: oktay50000 on June 21, 2014, 09:07:00 PM
Works like a charm ;)

mine works like charm too mate but...
have you checked graph on after burner for hickups?
you dont have waiting for pool message???
can yougive me link of sgminer you are using?
i am using 14.6 beta and sgminer fixed


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: oktay50000 on June 21, 2014, 09:19:11 PM
i upgraded my farm with this miner and driver to 14.6
linux rigs works fine for some time and then droping hash rate after waiting work ....

windows is better but sometimes getting waitin for work

any fix for linux
?


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: volodzya on June 21, 2014, 10:09:20 PM
@bullus,

can you post your config ?


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: bullus on June 21, 2014, 10:38:06 PM
@bullus,

can you post your config ?
Code:

],
"kernel" : "x11mod",
"api-allow" : "W:127.0.0.1",
"api-listen" : true,
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "28",
"failover-only" : true,
"kernel-path" : "/usr/local/bin",
"log" : "5",
"queue" : "1",
"scan-time" : "7",
"scrypt" : true,
"shares" : "0",
"failover-switch-delay" : "10",
"gpu-threads" : "2",
"gpu-dyninterval" : "7",
"gpu-engine" : "0",
"gpu-fan" : "55",
"gpu-platform" : "0",
"gpu-memclock" : "0",
"gpu-memdiff" : "0",
"gpu-powertune" : "8",
"gpu-vddc" : "0",
"intensity" : "18",
"temp-target" : "75",
"temp-overheat" : "85",
"temp-cutoff" : "95",
"temp-hysteresis" : "3",
"vectors" : "1",
"worksize" : "64",
"lookup-gap" : "0",
"shaders" : "1536",
"thread-concurrency" : "8000",
"no-pool-disable" : true,
"device" : "0"
}
6970@950/1375~2300kh/s x11


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: volodzya on June 21, 2014, 11:22:57 PM
@bullus,

can you post your config ?
Code:

],
"kernel" : "x11mod",
"api-allow" : "W:127.0.0.1",
"api-listen" : true,
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "28",
"failover-only" : true,
"kernel-path" : "/usr/local/bin",
"log" : "5",
"queue" : "1",
"scan-time" : "7",
"scrypt" : true,
"shares" : "0",
"failover-switch-delay" : "10",
"gpu-threads" : "2",
"gpu-dyninterval" : "7",
"gpu-engine" : "0",
"gpu-fan" : "55",
"gpu-platform" : "0",
"gpu-memclock" : "0",
"gpu-memdiff" : "0",
"gpu-powertune" : "8",
"gpu-vddc" : "0",
"intensity" : "18",
"temp-target" : "75",
"temp-overheat" : "85",
"temp-cutoff" : "95",
"temp-hysteresis" : "3",
"vectors" : "1",
"worksize" : "64",
"lookup-gap" : "0",
"shaders" : "1536",
"thread-concurrency" : "8000",
"no-pool-disable" : true,
"device" : "0"
}
6970@950/1375~2300kh/s x11

how many cards do you have in the rig ? are all 6970 ? what cpu / ram have you ?

p.s. thnx for the reply


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: Spacewide on June 21, 2014, 11:58:50 PM
Hello

Sharing my x11 .bat for 5x R9 280X RoyalQueen Club3D.
4.45mh/s

Code:
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
sgminer.exe -k x11mod -o stratum+tcp://eu.wafflepool.com:3331 -u xxx -p 0.16 -I 18,18,17,18,18 -w 256 --thread-concurrency 8192 --lookup-gap 2 -g 2 --gpu-engine 1150,1150,1150,1150,1150 --gpu-memclock 1500,1500,1500,1500,1500 --auto-fan --gpu-fan 55-85 --temp-cutoff 80 --temp-overheat 76 --temp-target 73 --no-submit-stale --no-pool-disable --api-listen --api-allow W:127.0.0.1

Runs like a tank.

G3220 intel CPU
8GB Ram
64GB SSD
Asrock BTC H81
x R9 280X RoyalQueen Club3D.


The api-listen and api-allow localhost is implemented to work with http://cgminermonitor.com, so obsolete.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: innergy on June 22, 2014, 05:30:49 AM
@djm34

Thank you a lot for this great sgminer  :)

I fixed the idle/work resuming problem.

This is the download link for the fixed miner: https://mega.co.nz/#!ZsJTALQI!qDh9jCWULjabTDPYq0K4fZamdZrPwot7m7AAfTEOJPQ (https://mega.co.nz/#!ZsJTALQI!qDh9jCWULjabTDPYq0K4fZamdZrPwot7m7AAfTEOJPQ)


I also opened a new thread (just in case) some will not notice this comment and the fixed version of the miner: https://bitcointalk.org/index.php?topic=658975.msg7412560#msg7412560

The fixed miner is not available anymore.
Could someone re-upload it. Thanks.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: gmerk on June 22, 2014, 05:56:35 AM



I found the opencl files in AMD folder inside \Packages\Drivers\Display\WB6A_INF\B171094 (after decompressing the 14.6 driver package without installing it, or with 7zip)
I don't know which are needed, so I copied everything that had "opencl" or "amdocl" in the filename into the sgminer folder (8 files, dlls & exes).
Deleted all previous bins, and now it's even better (+3%) than using the bins from 14.6 (I have 14.4 drivers installed).

Did this... 14.4 drivers with 14.6 opencl files in sgminer folder. Msi 7790s up from 1.17mh to 1.62mh. Sapphire 270s up from 2mh to 2.72mh. If anyone is interested in my configs I'll post them upon request.

I use a 7790 (seven-seven-nine-zero, a bit weak I know, but only ~70W).
With 14.6 it went from 1.2MH/s to 1.8MH/s but with locked memory clock (core clock not locked).
I removed 14.6, kept the .bin files, reinstalled 14.4 and everything is fine.
If I recreate the .bin with 14.4 I get my old low hashrates again...



Yes these little things are great power savers, and they run so cool...wish I had bought more last December when they were .1btc each. I'm very curious to know whats in your 1.8mh config...

I have a gigabyte 7790 with 1Gb GDDR5. Core @1150 Mem @1200 (for less heat)
I'm getting 1.830 MH/s and 0.027 WU/m (currently at fractalcoin)
This is my conf. It's nothing special...

Code:
]
,
"xintensity" : "100",
"vectors" : "1",
"worksize" : "128",
"kernel" : "x11mod",
"thread-concurrency" : "8000",
"lookup-gap" : "2",
"gpu-threads" : "4",
"gpu-engine" : "1150",
"gpu-memclock" : "1200",
"queue" : "2",
"scan-time" : "4",
"expiry" : "8",
"no-pool-disable" : true,
"failover-only" : true
}

TC doesn't play such important role as in scrypt. I also use 8192 or 2048, without any significant change.
Memory clock also doesn't affect my rate much, so I keep it low to drop the temps.
You can also try more threads (6 or 8 ).
Q/S/E  based mostly on the coin and pool and my experience/hope/illusion/paranoia...

Update: After a full day of mining, the memory clock is again stuck at stock speed (1500).
I restarted the miner but its still stuck. I'm using djm34 version.
I switched to kozmos version (with bins from 14.6), and the clock is again working ok.
I think this is getting too confusing for me to follow...

From what I've read so far, it seems series 5xxx & 6xxx don't benefit as much by 14.6 or the new miners.

Update2:
If the 14.6 opencl files are in sgminer folder, when I run sgminer, mem clock gets stuck @ stock freq.
If I remove them (after I make the bins), then mem clock acts normal. Weird or not, it works.
I've tried this with both djm34 & kozmos versions for both x11 and x13...



Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: MacHead2006 on June 22, 2014, 07:09:26 AM
When I try to ./configure new miner in PIMP (14.6) I got: no OpenCL found at the end of ./configure
I have downloaded 14.6 drivers and updated pimp 1.5.5.-14.4, but all was ok with prev. version of djm34 (nist5 mod) miner.

Any ideas ?
maybe copy any files from somewhere ? I see some copy win files but dont know what to do in Linux.  :-X


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: Kablam on June 22, 2014, 08:03:52 AM
When I try to ./configure new miner in PIMP (14.6) I got: no OpenCL found at the end of ./configure
I have downloaded 14.6 drivers and updated pimp 1.5.5.-14.4, but all was ok with prev. version of djm34 (nist5 mod) miner.

Any ideas ?
maybe copy any files from somewhere ? I see some copy win files but dont know what to do in Linux.  :-X

i think you have the wrong opencl verison or adl sdk after updating your drivers you have to manully delete and reinstall that.

no need to reinvent the wheel...

go to #pimp on irc freenode and ask for the 14.6b image of pimp and you dont have to do it yourself there is a workign image allrdy.

Kablam


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: MacHead2006 on June 22, 2014, 08:39:27 AM
http://files.getpimp.org/pimp-testing/

that was a link.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: aadje93 on June 22, 2014, 09:08:49 AM
Does anybody have a fix for zlib1.dll error. Can't find a solution on google to fix it. Dont know from which package it is :(

EDIT:

Found it in sgminer_x11mod version ;)

thanks man, hashing @ 3,9 now instead of 3,1 on 7950's. Hope this is also more stable, x11_mod had alot of "sgminer stopped working"

Imagine, i came from 1,93 on magicOS (magicpool ubuntu mining os) to 3.1 on the x11_mod and now 3,90. It insane!!


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: kangjunzi on June 22, 2014, 09:31:24 AM
@bullus,

can you post your config ?
Code:

],
"kernel" : "x11mod",
"api-allow" : "W:127.0.0.1",
"api-listen" : true,
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "28",
"failover-only" : true,
"kernel-path" : "/usr/local/bin",
"log" : "5",
"queue" : "1",
"scan-time" : "7",
"scrypt" : true,
"shares" : "0",
"failover-switch-delay" : "10",
"gpu-threads" : "2",
"gpu-dyninterval" : "7",
"gpu-engine" : "0",
"gpu-fan" : "55",
"gpu-platform" : "0",
"gpu-memclock" : "0",
"gpu-memdiff" : "0",
"gpu-powertune" : "8",
"gpu-vddc" : "0",
"intensity" : "18",
"temp-target" : "75",
"temp-overheat" : "85",
"temp-cutoff" : "95",
"temp-hysteresis" : "3",
"vectors" : "1",
"worksize" : "64",
"lookup-gap" : "0",
"shaders" : "1536",
"thread-concurrency" : "8000",
"no-pool-disable" : true,
"device" : "0"
}
6970@950/1375~2300kh/s x11
Great, this is a good step towards even better community.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: Kablam on June 22, 2014, 10:23:14 AM
http://www.xxxxxxx.xxx/xxxx/

that was a link.


dont publish that link here there was reason for you to go to the irc channel and ask for it!
the 1.5.51-14.6b image isnt public since there is some bugs on it like sgminer 5 not working....

 :-\


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: BITCOINDENMARK on June 22, 2014, 10:27:24 AM
got 4.400 my r9 280x toxic. thank you. :-*

Is that on windows 32 or 64 ?  (Does it mater, using 32/64?)


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: bullus on June 22, 2014, 11:11:23 AM
@bullus,

can you post your config ?
Code:

],
"kernel" : "x11mod",
"api-allow" : "W:127.0.0.1",
"api-listen" : true,
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "28",
"failover-only" : true,
"kernel-path" : "/usr/local/bin",
"log" : "5",
"queue" : "1",
"scan-time" : "7",
"scrypt" : true,
"shares" : "0",
"failover-switch-delay" : "10",
"gpu-threads" : "2",
"gpu-dyninterval" : "7",
"gpu-engine" : "0",
"gpu-fan" : "55",
"gpu-platform" : "0",
"gpu-memclock" : "0",
"gpu-memdiff" : "0",
"gpu-powertune" : "8",
"gpu-vddc" : "0",
"intensity" : "18",
"temp-target" : "75",
"temp-overheat" : "85",
"temp-cutoff" : "95",
"temp-hysteresis" : "3",
"vectors" : "1",
"worksize" : "64",
"lookup-gap" : "0",
"shaders" : "1536",
"thread-concurrency" : "8000",
"no-pool-disable" : true,
"device" : "0"
}
6970@950/1375~2300kh/s x11

how many cards do you have in the rig ? are all 6970 ? what cpu / ram have you ?

p.s. thnx for the reply

This rig is only 1x 6970 (gamepc)

intel cpu 2600K
8gb mem
Asus Maximus IV
win8.1

Other rig with 4x7950 + 1x6970 is hashing the same for the 6970.

G3220 intel CPU
8GB Ram
Asrock BTC H81
win8.1


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: DedRes on June 22, 2014, 12:04:26 PM
Hi, guys.
Hi
I'm a newbie in mining and I'd highly appreciate some help with the sgminer on win7
For some reason I'm unable to get connected to any pool (I tried several).
Drivers are 14.6

And here's how it runs:

D:\ISR\sgminer_14.6_fixed\kernel>setx GPU_MAX_ALLOC_PERCENT 100
SUCCESS: Specified value was saved.
D:\ISR\sgminer_14.6_fixed\kernel>setx GPU_USE_SYNC_OBJECTS 1
SUCCESS: Specified value was saved.
D:\ISR\sgminer_14.6_fixed\kernel>
D:\ISR\sgminer_14.6_fixed\kernel>..\sgminer.exe --kernel x11mod -g 1 -w 128 -I 18 -o stratum+tcp://west01.us.trademybit.com:4440 -u xxxxxx.1 -p x --no-submit-stale --verbose

--text-only
[13:54:16] Started sgminer 4.1.0
[13:54:17] CL Platform 0 vendor: Advanced Micro Devices, Inc.
[13:54:17] CL Platform 0 name: AMD Accelerated Parallel Processing
[13:54:17] CL Platform 0 version: OpenCL 1.2 AMD-APP (1526.3)
[13:54:17] Platform 0 devices: 1
[13:54:17]      0       Caicos
[13:54:17] Number of ADL devices: 1
[13:54:18] ATI ADL Overdrive5 API found.
[13:54:18] ATI ADL Overdrive6 API found.
[13:54:18] Found 4 ADL adapters
[13:54:18] ADL index 0, id 321458240 - BIOS partno.: BR41330.001, version: 013.0
09.000.010, date: 2011/07/20 06:08
[13:54:18] GPU 0 assigned: iAdapterIndex:0 iPresent:1 strUDID:PCI_VEN_1002&DEV_6760&SUBSYS_161E103C&REV_00_4&2179970E&0&0008A iBusNumber:1 iDeviceNumber:0 iFunctionNumber:0

iVendorID:1002 name:AMD Radeon HD 7400M Series
[13:54:18] ADL index 1, id 321458240 - BIOS partno.: BR41330.001, version: 013.0
09.000.010, date: 2011/07/20 06:08
[13:54:18] ADL index 2, id 321458240 - BIOS partno.: BR41330.001, version: 013.0
09.000.010, date: 2011/07/20 06:08
[13:54:18] ADL index 3, id 321458240 - BIOS partno.: BR41330.001, version: 013.0
09.000.010, date: 2011/07/20 06:08
[13:54:18] GPU 0 AMD Radeon HD 7400M Series hardware monitoring enabled
[13:54:18] ADL GPU 0 is Adapter index 0 and maps to adapter id 321458240
[13:54:18] GPU 0 BIOS partno.: BR41330.001, version: 013.009.000.010, date: 2011/07/20 06:08
[13:54:18] Failed to ADL_Overdrive5_FanSpeed_Get for default value
[13:54:18] Init GPU thread 0 GPU 0 virtual GPU 0
[13:54:18] CL Platform vendor: Advanced Micro Devices, Inc.
[13:54:18] CL Platform name: AMD Accelerated Parallel Processing
[13:54:18] CL Platform version: OpenCL 1.2 AMD-APP (1526.3)
[13:54:18] List of devices:
[13:54:18]      0       Caicos
[13:54:18] Selected 0: Caicos
[13:54:18] Kernel x11mod is experimental.
[13:55:15] Initialising kernel x11mod.cl with bitalign, 1 vectors and worksize 128
[13:55:15] initCl() finished. Found Caicos
[13:55:15] Probing for an alive pool
[13:55:15] Testing Pool 0
[13:55:25] Waiting for work to be available from pools.
[13:55:25] Setting GPUs to idle performance.
[13:55:58] Closing socket for stratum Pool 0
[13:56:15] No servers were found that could be used to get work from.
[13:56:15] Please check the details from the list below of the servers you have input
[13:56:15] Most likely you have input the wrong URL, forgotten to add a port, or  have not set up workers
[13:56:15] Pool: 0  URL: stratum+tcp://west01.us.trademybit.com:4440  User: xxxxxx.1  Password: x
[13:56:15] No servers could be used! Exiting.


Where am I wrong with that?
Thanks in advance


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: Hank.H on June 22, 2014, 12:42:12 PM
i encountered some issues with this 14.4 fixed version.

I downgraded to 14.4 but when i ran it, only 1 GPU work.

like :

GPU0 : OFF
GPU1 : 100%
GPU2 : OFF
GPU3 : OFF

Any ideas ?  :'(

thx

(4x R9 290)


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: rustybeamer on June 22, 2014, 01:16:42 PM
Thanks to all concerned (too many posts to quote).

Took my MSI R9 290 from 3.7 to 4.99Mh/s on x11.

 Used the method of extracting (but not installing) the 14.6 AMD package, copying the 8 required files from the AMD/AMD-Catalyst-14.6-Beta-V1.0-Windows-May23/Packages/Drivers/Display/WB6A-INF/B172153 folder and putting them in the sgminer folder with any previous bins removed before starting up the miner.

Getting WU 0.069 and 0.7% rejects with 1010 core, 1300 mem, intensity 20 on trademybit pool.  Gonna let it run for a few hours before tweaking some more.

Cheers again  :)


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: fra55 on June 22, 2014, 02:19:01 PM
i encountered some issues with this 14.4 fixed version.

I downgraded to 14.4 but when i ran it, only 1 GPU work.

like :

GPU0 : OFF
GPU1 : 100%
GPU2 : OFF
GPU3 : OFF

Any ideas ?  :'(

thx

(4x R9 290)

Check the .conf file, it will easily contain the string GPU: 1, so only the GPU n.1 will be activated.
Change it to 0,1,2,3


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: Hank.H on June 22, 2014, 02:31:41 PM
i encountered some issues with this 14.4 fixed version.

I downgraded to 14.4 but when i ran it, only 1 GPU work.

like :

GPU0 : OFF
GPU1 : 100%
GPU2 : OFF
GPU3 : OFF

Any ideas ?  :'(

thx

(4x R9 290)

Check the .conf file, it will easily contain the string GPU: 1, so only the GPU n.1 will be activated.
Change it to 0,1,2,3

Yes ! it works thank you very much :D


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: volodzya on June 22, 2014, 03:05:47 PM
@bullus, thanks.

I have H81 btc pro, g1820, 4gb 1333mhz ram - not sure if it can be the cause of 100kh per card less performance :\ ?

How do you have the cards connected ?

I have also 5970 in the same rig, don't know, if this could also be the reason for the slightly lower hash rate.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: bullus on June 22, 2014, 03:27:52 PM
@bullus, thanks.

I have H81 btc pro, g1820, 4gb 1333mhz ram - not sure if it can be the cause of 100kh per card less performance :\ ?

How do you have the cards connected ?

I have also 5970 in the same rig, don't know, if this could also be the reason for the slightly lower hash rate.

Are u running te same clocks?
I already said I was using an old bin file, if I created a new one with the latest miner I also get ~-100kh/s.
Let's see if I can upload my binfile somehow.

edit
x11mod bin file for 6970
https://mega.co.nz/#!2JdlnIRL!5cOVuWT-2c9OVBjHRKqYhShzYTeKRChF6uOixVOvWsA (https://mega.co.nz/#!2JdlnIRL!5cOVuWT-2c9OVBjHRKqYhShzYTeKRChF6uOixVOvWsA)

x13modold bin file for 6970
https://mega.co.nz/#!WQdj1RAB!6Bh1DvzxT_G1yRN2z_i4xC7piDqnFVS-FsH3K0MSgcs (https://mega.co.nz/#!WQdj1RAB!6Bh1DvzxT_G1yRN2z_i4xC7piDqnFVS-FsH3K0MSgcs)

Code:
sgminer 4.1.0 - Started: [2014-06-22 15:17:32] - [0 days 02:33:34]
--------------------------------------------------------------------------------
(5s):2.301M (avg):2.295Mh/s | A:963  R:14  HW:0  WU:0.032/m
ST: 1  SS: 0  NB: 205  LW: 11452  GF: 0  RF: 0
Connected to miningrentalrigs x11 (stratum) diff 0.005 as user xxxx
Block: 6dfdf680...  Diff:79  Started: [17:51:00]  Best share: 231
--------------------------------------------------------------------------------
[P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
 GPU 0:  59.0C 2452RPM | 2.279M/2.296Mh/s | A:964 R:  1.4% HW:0 WU:0.032/m I:18
--------------------------------------------------------------------------------
[17:49:40] Accepted 21a89171 Diff 0.030/0.005 GPU 0 at miningrentalrigs x11
[17:49:42] Accepted 14d0b76e Diff 0.048/0.005 GPU 0 at miningrentalrigs x11
[17:49:51] Accepted 4a52b5b8 Diff 0.013/0.005 GPU 0 at miningrentalrigs x11
[17:50:06] Accepted 9d23e7e7 Diff 0.006/0.005 GPU 0 at miningrentalrigs x11
[17:50:09] Network diff set to 1.38K
[17:50:09] Stratum from miningrentalrigs x11 detected new block
[17:50:10] Accepted aaa4f24e Diff 0.006/0.005 GPU 0 at miningrentalrigs x11

 ;D


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: patoberli on June 22, 2014, 05:11:22 PM
I don't get any speed increase with this binary over the default one on a 6950. Getting 1.7 Mh/s with it.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: captainbluff on June 22, 2014, 05:16:08 PM
On one of my rigs I downgraded from 14.6 to 14.4, while running the catalyst uninstaller the rig turned off and won't turn on again. anyone else?


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: volodzya on June 22, 2014, 05:21:08 PM
@bullus, thanks.

I have H81 btc pro, g1820, 4gb 1333mhz ram - not sure if it can be the cause of 100kh per card less performance :\ ?

How do you have the cards connected ?

I have also 5970 in the same rig, don't know, if this could also be the reason for the slightly lower hash rate.

Are u running te same clocks?
I already said I was using an old bin file, if I created a new one with the latest miner I also get ~-100kh/s.
Let's see if I can upload my binfile somehow.

edit
x11mod bin file for 6970
https://mega.co.nz/#!2JdlnIRL!5cOVuWT-2c9OVBjHRKqYhShzYTeKRChF6uOixVOvWsA (https://mega.co.nz/#!2JdlnIRL!5cOVuWT-2c9OVBjHRKqYhShzYTeKRChF6uOixVOvWsA)

x13modold bin file for 6970
https://mega.co.nz/#!WQdj1RAB!6Bh1DvzxT_G1yRN2z_i4xC7piDqnFVS-FsH3K0MSgcs (https://mega.co.nz/#!WQdj1RAB!6Bh1DvzxT_G1yRN2z_i4xC7piDqnFVS-FsH3K0MSgcs)

Code:
sgminer 4.1.0 - Started: [2014-06-22 15:17:32] - [0 days 02:33:34]
--------------------------------------------------------------------------------
(5s):2.301M (avg):2.295Mh/s | A:963  R:14  HW:0  WU:0.032/m
ST: 1  SS: 0  NB: 205  LW: 11452  GF: 0  RF: 0
Connected to miningrentalrigs x11 (stratum) diff 0.005 as user xxxx
Block: 6dfdf680...  Diff:79  Started: [17:51:00]  Best share: 231
--------------------------------------------------------------------------------
[P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
 GPU 0:  59.0C 2452RPM | 2.279M/2.296Mh/s | A:964 R:  1.4% HW:0 WU:0.032/m I:18
--------------------------------------------------------------------------------
[17:49:40] Accepted 21a89171 Diff 0.030/0.005 GPU 0 at miningrentalrigs x11
[17:49:42] Accepted 14d0b76e Diff 0.048/0.005 GPU 0 at miningrentalrigs x11
[17:49:51] Accepted 4a52b5b8 Diff 0.013/0.005 GPU 0 at miningrentalrigs x11
[17:50:06] Accepted 9d23e7e7 Diff 0.006/0.005 GPU 0 at miningrentalrigs x11
[17:50:09] Network diff set to 1.38K
[17:50:09] Stratum from miningrentalrigs x11 detected new block
[17:50:10] Accepted aaa4f24e Diff 0.006/0.005 GPU 0 at miningrentalrigs x11

 ;D

I do lose ~ 100 kh/s per card using the new bins, but even with old (or your) bins I reach max of 2200 kh/s.
I can see you using "gpu-threads", it makes miner more rely on the cpu, which is less powerful in my case and max gpu freq I can squeeze for solid work is around 910 - 920 mhz.

Anyhow, an extra thanks for the uploaded bin!



Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: bullus on June 22, 2014, 05:27:02 PM
@bullus, thanks.

I have H81 btc pro, g1820, 4gb 1333mhz ram - not sure if it can be the cause of 100kh per card less performance :\ ?

How do you have the cards connected ?

I have also 5970 in the same rig, don't know, if this could also be the reason for the slightly lower hash rate.

Are u running te same clocks?
I already said I was using an old bin file, if I created a new one with the latest miner I also get ~-100kh/s.
Let's see if I can upload my binfile somehow.

edit
x11mod bin file for 6970
https://mega.co.nz/#!2JdlnIRL!5cOVuWT-2c9OVBjHRKqYhShzYTeKRChF6uOixVOvWsA (https://mega.co.nz/#!2JdlnIRL!5cOVuWT-2c9OVBjHRKqYhShzYTeKRChF6uOixVOvWsA)

x13modold bin file for 6970
https://mega.co.nz/#!WQdj1RAB!6Bh1DvzxT_G1yRN2z_i4xC7piDqnFVS-FsH3K0MSgcs (https://mega.co.nz/#!WQdj1RAB!6Bh1DvzxT_G1yRN2z_i4xC7piDqnFVS-FsH3K0MSgcs)

Code:
sgminer 4.1.0 - Started: [2014-06-22 15:17:32] - [0 days 02:33:34]
--------------------------------------------------------------------------------
(5s):2.301M (avg):2.295Mh/s | A:963  R:14  HW:0  WU:0.032/m
ST: 1  SS: 0  NB: 205  LW: 11452  GF: 0  RF: 0
Connected to miningrentalrigs x11 (stratum) diff 0.005 as user xxxx
Block: 6dfdf680...  Diff:79  Started: [17:51:00]  Best share: 231
--------------------------------------------------------------------------------
[P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
 GPU 0:  59.0C 2452RPM | 2.279M/2.296Mh/s | A:964 R:  1.4% HW:0 WU:0.032/m I:18
--------------------------------------------------------------------------------
[17:49:40] Accepted 21a89171 Diff 0.030/0.005 GPU 0 at miningrentalrigs x11
[17:49:42] Accepted 14d0b76e Diff 0.048/0.005 GPU 0 at miningrentalrigs x11
[17:49:51] Accepted 4a52b5b8 Diff 0.013/0.005 GPU 0 at miningrentalrigs x11
[17:50:06] Accepted 9d23e7e7 Diff 0.006/0.005 GPU 0 at miningrentalrigs x11
[17:50:09] Network diff set to 1.38K
[17:50:09] Stratum from miningrentalrigs x11 detected new block
[17:50:10] Accepted aaa4f24e Diff 0.006/0.005 GPU 0 at miningrentalrigs x11

 ;D

I do lose ~ 100 kh/s per card using the new bins, but even with old (or your) bins I reach max of 2200 kh/s.
I can see you using "gpu-threads", it makes miner more rely on the cpu, which is less powerful in my case and max gpu freq I can squeeze for solid work is around 910 - 920 mhz.

Anyhow, an extra thanks for the uploaded bin!



Are u using TCC 8000 and worksize 64?
I tried your oc clocks and getting about 2230 @920mhz, when oc to 950mhz -2300kh/s

Code:
"kernel" : "x11mod",
"api-allow" : "W:127.0.0.1",
"api-listen" : true,
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "28",
"failover-only" : true,
"kernel-path" : "/usr/local/bin",
"log" : "5",
"queue" : "1",
"scan-time" : "7",
"scrypt" : true,
"shares" : "0",
"failover-switch-delay" : "10",
"gpu-threads" : "2",
"gpu-dyninterval" : "7",
"gpu-engine" : "0",
"gpu-fan" : "55",
"gpu-platform" : "0",
"gpu-memclock" : "0",
"gpu-memdiff" : "0",
"gpu-powertune" : "8",
"gpu-vddc" : "0",
"intensity" : "18",
"temp-target" : "75",
"temp-overheat" : "85",
"temp-cutoff" : "95",
"temp-hysteresis" : "3",
"vectors" : "1",
"worksize" : "64",
"lookup-gap" : "0",
"shaders" : "1536",
"thread-concurrency" : "8000",
"no-pool-disable" : true,
"device" : "0"
}


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: hero18688 on June 22, 2014, 05:48:33 PM
What is your hashrate of x13 with 280x?


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: amit2007gunjan on June 22, 2014, 05:53:56 PM
What is your hashrate of x13 with 280x?

I am getting 3.077 Mh/s now from 2.6 Mh/s on my each Sapphire r9 280x.

Thanks and good job OP


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: hashbrown9000 on June 22, 2014, 06:55:02 PM
is anyone running an undervolted BIOS on any R9 270 cards? 

I did mine way back for scrypt, but when switching to the x11/x13mod kernels the rig would lock up 2 hours into the mining session with lasybear's version.  Anyone have these issues on this newest miner?


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: DedRes on June 22, 2014, 07:09:39 PM
Bump!
Any help for connection issues on the previous page?

Thanks.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: bullus on June 22, 2014, 07:14:22 PM
is anyone running an undervolted BIOS on any R9 270 cards? 

I did mine way back for scrypt, but when switching to the x11/x13mod kernels the rig would lock up 2 hours into the mining session with lasybear's version.  Anyone have these issues on this newest miner?

u need more voltage..


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: hashbrown9000 on June 22, 2014, 07:23:51 PM
Quote
Quote from: hashbrown9000 on Today at 06:55:02 PM
is anyone running an undervolted BIOS on any R9 270 cards?

I did mine way back for scrypt, but when switching to the x11/x13mod kernels the rig would lock up 2 hours into the mining session with lasybear's version.  Anyone have these issues on this newest miner?

u need more voltage..

yeah i was considering flashing all of them back to stock volts.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: splawik21 on June 22, 2014, 07:27:52 PM
hmmm strange
have r9 280x but get only 3300 MHs  1080@1500.... any ideas why only so low?
have installed 14,6 amd drivers and sdk 2,9

????


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: ibfr33k on June 22, 2014, 07:31:00 PM
Make sure you delete your bin files.  If not it will use the old ones and not create new ones with the new driver.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: splawik21 on June 22, 2014, 07:35:40 PM
Make sure you delete your bin files.  If not it will use the old ones and not create new ones with the new driver.

deleted
3375MHs
with

-g 2 -w 64 -I 13 --lookup-gap 2 --thread-concurrency 8191 --gpu-memclock 1500 --gpu-engine 1080 --temp-target 70 --temp-overheat 80 --temp-cutoff 82 --gpu-powertune -15 --gpu-fan auto --failover-only --expiry 20 --scan-time 10 --queue 0 --no-submit-stale


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: ibfr33k on June 22, 2014, 07:43:01 PM
Not sure if it makes a whole lot of difference, I'm using -w 256 --thread-concurrency 8192 --gpu-memclock 1500 --gpu-engine 1100.  That gets me between 4.0 to 4.2mhash/s per 280x.  I didn't install anything extra other than the 14.6 RC drivers from guru3d.

Anyone have any ideas on what is a good speed for a 290x?  I'm using 14.6 drivers and the .cl files posted from someone on here and I'm getting 5.9Mhash/s.

core 1065
mem 1250
intensity 17
threads 27400
worksize 256

If I increase memory to 1500 I can get it up to 6.1Mhash/s but it gets a little unstable.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: splawik21 on June 22, 2014, 08:36:00 PM
Not sure if it makes a whole lot of difference, I'm using -w 256 --thread-concurrency 8192 --gpu-memclock 1500 --gpu-engine 1100.  That gets me between 4.0 to 4.2mhash/s per 280x.  I didn't install anything extra other than the 14.6 RC drivers from guru3d.

Anyone have any ideas on what is a good speed for a 290x?  I'm using 14.6 drivers and the .cl files posted from someone on here and I'm getting 5.9Mhash/s.

core 1065
mem 1250
intensity 17
threads 27400
worksize 256

If I increase memory to 1500 I can get it up to 6.1Mhash/s but it gets a little unstable.
can you link .cl file here please???


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: ibfr33k on June 22, 2014, 08:57:57 PM
I used the one's from this post that COOLERbyPSP linked on another post.  Not sure who created them.

https://bitcointalk.org/index.php?topic=623409.msg7406963#msg7406963


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: barryzand on June 22, 2014, 09:10:21 PM
alright... after a lot of pain in the ass restarts... tests... etc etc...  :'( :'(


I found an old bin file for my 5870 cards... running with driver 14.4

copied it into the mining folder after updating too 14.6.. and it works... but I expected more though... so  If someone got more out of it... pls share...

My clocks are 880/1200

with version 14.4 and lasybears miner I got about 1800/1820 mhs

With the copied bin and 14.6 beta... and with the new miner, I have about 1900/1920 mhs with the same settings...

Hope this helps some people out with these cards...

If needed... I could upload the bin file... ;)


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: aatila on June 22, 2014, 09:20:11 PM
I can confirm they're working (compiled on a modified version of linux), I'm getting 3.8mh for each 280x. It rose from 2.1mh...
Amazing work man!
Will you send settings pls


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: aatila on June 22, 2014, 10:30:28 PM
Hello

Sharing my x11 .bat for 5x R9 280X RoyalQueen Club3D.
4.45mh/s

Code:
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
sgminer.exe -k x11mod -o stratum+tcp://eu.wafflepool.com:3331 -u xxx -p 0.16 -I 18,18,17,18,18 -w 256 --thread-concurrency 8192 --lookup-gap 2 -g 2 --gpu-engine 1150,1150,1150,1150,1150 --gpu-memclock 1500,1500,1500,1500,1500 --auto-fan --gpu-fan 55-85 --temp-cutoff 80 --temp-overheat 76 --temp-target 73 --no-submit-stale --no-pool-disable --api-listen --api-allow W:127.0.0.1

Runs like a tank.

G3220 intel CPU
8GB Ram
64GB SSD
Asrock BTC H81
x R9 280X RoyalQueen Club3D.


The api-listen and api-allow localhost is implemented to work with http://cgminermonitor.com, so obsolete.
config setting pls


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: wmr1988 on June 23, 2014, 01:20:37 AM
Has anyone gotten this to work for Windows now?

For some reason I'm getting only 1.5MH/s on HD 7850 @1050/1300 core/mem - which is very close to the previous lazybear x11 mod for sph

.bat as below
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
C:\sgminer\sgminer.exe -k x11mod  -o -p -u -I 15 -g 4 -w 128 --lookup-gap 2 --thread-concurrency 8192 --failover-only



Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: loonb on June 23, 2014, 01:51:49 AM
Has anyone gotten this to work for Windows now?

For some reason I'm getting only 1.5MH/s on HD 7850 @1050/1300 core/mem - which is very close to the previous lazybear x11 mod for sph

.bat as below
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
C:\sgminer\sgminer.exe -k x11mod  -o -p -u -I 15 -g 4 -w 128 --lookup-gap 2 --thread-concurrency 8192 --failover-only


-I 16 -g 2


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: wmr1988 on June 23, 2014, 02:25:56 AM
Has anyone gotten this to work for Windows now?

For some reason I'm getting only 1.5MH/s on HD 7850 @1050/1300 core/mem - which is very close to the previous lazybear x11 mod for sph

.bat as below
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
C:\sgminer\sgminer.exe -k x11mod  -o -p -u -I 15 -g 4 -w 128 --lookup-gap 2 --thread-concurrency 8192 --failover-only


-I 16 -g 2

Thanks but the increase is very miminal vs. the current setting. I'm just not getting that 20-30% performance increase that supposedly come with 14.4/14.6 driver.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: bullus on June 23, 2014, 03:10:36 AM
Has anyone gotten this to work for Windows now?

For some reason I'm getting only 1.5MH/s on HD 7850 @1050/1300 core/mem - which is very close to the previous lazybear x11 mod for sph

.bat as below
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
C:\sgminer\sgminer.exe -k x11mod  -o -p -u -I 15 -g 4 -w 128 --lookup-gap 2 --thread-concurrency 8192 --failover-only



try
sgminer.exe (so delete C:\sgminer\) maybe it was refering to another exe of sgminer.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: wmr1988 on June 23, 2014, 03:28:32 AM
Has anyone gotten this to work for Windows now?

For some reason I'm getting only 1.5MH/s on HD 7850 @1050/1300 core/mem - which is very close to the previous lazybear x11 mod for sph

.bat as below
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
C:\sgminer\sgminer.exe -k x11mod  -o -p -u -I 15 -g 4 -w 128 --lookup-gap 2 --thread-concurrency 8192 --failover-only



try
sgminer.exe (so delete C:\sgminer\) maybe it was refering to another exe of sgminer.


My .bats were in another folder. But no even if i copy them over and removing the prefix doesn't have any difference...


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: smtn512 on June 23, 2014, 04:26:57 AM



I found the opencl files in AMD folder inside \Packages\Drivers\Display\WB6A_INF\B171094 (after decompressing the 14.6 driver package without installing it, or with 7zip)
I don't know which are needed, so I copied everything that had "opencl" or "amdocl" in the filename into the sgminer folder (8 files, dlls & exes).
Deleted all previous bins, and now it's even better (+3%) than using the bins from 14.6 (I have 14.4 drivers installed).

Did this... 14.4 drivers with 14.6 opencl files in sgminer folder. Msi 7790s up from 1.17mh to 1.62mh. Sapphire 270s up from 2mh to 2.72mh. If anyone is interested in my configs I'll post them upon request.

I use a 7790 (seven-seven-nine-zero, a bit weak I know, but only ~70W).
With 14.6 it went from 1.2MH/s to 1.8MH/s but with locked memory clock (core clock not locked).
I removed 14.6, kept the .bin files, reinstalled 14.4 and everything is fine.
If I recreate the .bin with 14.4 I get my old low hashrates again...



Yes these little things are great power savers, and they run so cool...wish I had bought more last December when they were .1btc each. I'm very curious to know whats in your 1.8mh config...

I have a gigabyte 7790 with 1Gb GDDR5. Core @1150 Mem @1200 (for less heat)
I'm getting 1.830 MH/s and 0.027 WU/m (currently at fractalcoin)
This is my conf. It's nothing special...

Code:
]
,
"xintensity" : "100",
"vectors" : "1",
"worksize" : "128",
"kernel" : "x11mod",
"thread-concurrency" : "8000",
"lookup-gap" : "2",
"gpu-threads" : "4",
"gpu-engine" : "1150",
"gpu-memclock" : "1200",
"queue" : "2",
"scan-time" : "4",
"expiry" : "8",
"no-pool-disable" : true,
"failover-only" : true
}

TC doesn't play such important role as in scrypt. I also use 8192 or 2048, without any significant change.
Memory clock also doesn't affect my rate much, so I keep it low to drop the temps.
You can also try more threads (6 or 8 ).
Q/S/E  based mostly on the coin and pool and my experience/hope/illusion/paranoia...

Update: After a full day of mining, the memory clock is again stuck at stock speed (1500).
I restarted the miner but its still stuck. I'm using djm34 version.
I switched to kozmos version (with bins from 14.6), and the clock is again working ok.
I think this is getting too confusing for me to follow...

From what I've read so far, it seems series 5xxx & 6xxx don't benefit as much by 14.6 or the new miners.

Update2:
If the 14.6 opencl files are in sgminer folder, when I run sgminer, mem clock gets stuck @ stock freq.
If I remove them (after I make the bins), then mem clock acts normal. Weird or not, it works.
I've tried this with both djm34 & kozmos versions for both x11 and x13...



Thanks for the follow up. The MSIs have never liked multiple GPU threads, on any algo... Tried it today with 2 threads and most of your settings and I did get into the 1.8mh range, but after a few hours a couple of cards just slumped down to 1.4mh for some reason. Clocks still the same, no proof of a driver crash but yet they slowed down, had to reboot to get full hashrate back...odd. I did change to Xi 100 and moved my clocks around some... Kept 1130/1400 1 thread per gpu which got them to 1.75mh each just fine holding 66C in a Texas garage with AC maintaining 30C (got tired of the rigs fighting my central air) each card pulling 65-70w total. Good enough for me!


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: samsss on June 23, 2014, 06:01:27 AM
 ??? ???my other cards doing very good(low heat,high speed),but my r9 290 became very hot and not as fast as it should be,anybody know why?(with new sg miner and 14.6driver)


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: zaqco on June 23, 2014, 06:08:33 AM
Does this have automatic x11 / x13 switching for MiningRigRentals and/or TradeMyBit?
Could someone please post an example for it if you have it.  Much appreciated.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: fra55 on June 23, 2014, 06:51:50 AM
Hello

Sharing my x11 .bat for 5x R9 280X RoyalQueen Club3D.
4.45mh/s

Code:
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
sgminer.exe -k x11mod -o stratum+tcp://eu.wafflepool.com:3331 -u xxx -p 0.16 -I 18,18,17,18,18 -w 256 --thread-concurrency 8192 --lookup-gap 2 -g 2 --gpu-engine 1150,1150,1150,1150,1150 --gpu-memclock 1500,1500,1500,1500,1500 --auto-fan --gpu-fan 55-85 --temp-cutoff 80 --temp-overheat 76 --temp-target 73 --no-submit-stale --no-pool-disable --api-listen --api-allow W:127.0.0.1

Runs like a tank.

G3220 intel CPU
8GB Ram
64GB SSD
Asrock BTC H81
x R9 280X RoyalQueen Club3D.


The api-listen and api-allow localhost is implemented to work with http://cgminermonitor.com, so obsolete.
config setting pls


Just copy the values of the .bat file in the .conf file, I stands for Intensity, W for worksize, the other strings are quite straightforward


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: chengtangclnru4 on June 23, 2014, 06:59:48 AM
Hello

Sharing my x11 .bat for 5x R9 280X RoyalQueen Club3D.
4.45mh/s

Code:
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
sgminer.exe -k x11mod -o stratum+tcp://eu.wafflepool.com:3331 -u xxx -p 0.16 -I 18,18,17,18,18 -w 256 --thread-concurrency 8192 --lookup-gap 2 -g 2 --gpu-engine 1150,1150,1150,1150,1150 --gpu-memclock 1500,1500,1500,1500,1500 --auto-fan --gpu-fan 55-85 --temp-cutoff 80 --temp-overheat 76 --temp-target 73 --no-submit-stale --no-pool-disable --api-listen --api-allow W:127.0.0.1

Runs like a tank.

G3220 intel CPU
8GB Ram
64GB SSD
Asrock BTC H81
x R9 280X RoyalQueen Club3D.


The api-listen and api-allow localhost is implemented to work with http://cgminermonitor.com, so obsolete.
config setting pls

If we add to some list, I will keep voting.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: CoinMin3r on June 23, 2014, 09:01:47 AM
Tried this with my R9 290 with amd 14.4, but my hashrate got decreased than before.
I used to get 2.5+MH in x13 mode before but with this just 2.3 MH.
Any idea what went wrong.
Setting are all same before & now.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: GhostPlayer on June 23, 2014, 09:08:13 AM
WORKS !! AMD 13.12 - (opencl etc from 14.6 dropped in sgminer folder) - 4,15 mh/s from 280x (bios undervolted)

Well, it worked for me, but weird. When I first moved to x11, I used scrypt setting, and that was crap. So after much tweaking I found that
-I 19 -g 1 (pools) and -I 18 -g 1 (p2pool) gave me the best performance.

 Same happened here. With -g 2 -I 13 (max without driver crash) I get 3,1mh/s.

 Total hashrate (5x 280x) = 20,75 mh/s
 sgminer reports WU = 0.290,
 pool is going a bit bananas, but it also did that before. Reporting 32mh/s, but its only been up 5 minutes.
 
Try these!

Quote
-k x11mod -o stratum+tcp://xxx.xxx.org:3333 -u xxxx -p xxxxx --auto-fan --gpu-fan 25-85 --temp-cutoff 92 --temp-overheat 88 --temp-target 64 -I 19 -g 1 -w 256 --lookup-gap 2 --thread-concurrency 8192 --gpu-powertune 20 --gpu-engine 1100 --gpu-memclock 1500

 Thank you!!


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: atp1916 on June 23, 2014, 09:45:45 AM
I can also confirm that the openCL file copy method works on 14.4 / 13.12 with 290s and 270s.  Just deleted old bins and extra hash is there.

Here is a shot of the AMD openCL files i pulled:
http://i59.tinypic.com/2chuatd.jpg

Edit: I am noticing 13.12 rigs are slower than the 14.4 / 14.6 rigs (maybe).  May need minimum 14.4 to make this work.  Testing now...  No difference with 13.12 vs 14.4/14.6 with same settings.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: Eastwind on June 23, 2014, 09:48:26 AM
Can somebody post a .bin for X13 generated with 14.6?

Hopefully, with TC=8192, Worksize 128 or 256, gpu threads = 2.

Thanks in advance.

Edit: found it
https://bitcointalk.org/index.php?topic=658411.msg7429385#msg7429385


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: trankil on June 23, 2014, 09:54:52 AM
hello
i'm on linux with smos linux

i have updated successfully my AMD driver but i have a problem to compile your miner


when i use

CFLAGS="-O2 -Wall -march=native" ./configure

i have this result

Quote

------------------------------------------------------------------------
sgminer 4.1.0
------------------------------------------------------------------------


Configuration Options Summary:

  Use git version......: yes
  libcurl(GBT+getwork).: Enabled: -lcurl
  curses.TUI...........: FOUND: -lncurses
  OpenCL...............: FOUND. GPU mining support enabled
  ADL..................: SDK found, GPU monitoring support enabled

Compilation............: make (or gmake)
  CPPFLAGS.............:
  CFLAGS...............: -O2 -Wall -march=native
  LDFLAGS..............:  -lpthread
  LDADD................: -ldl -lcurl   compat/jansson-2.5/src/.libs/libjansson.a -lpthread -L/opt/AMDAPP/lib/x86 -lOpenCL    -lm -lrt

Installation...........: make install (as root if needed, with 'su' or 'sudo')
  prefix...............: /usr/local

root@smos-1:/opt/miners/sph-sgminer_x11mod# CFLAGS="-O2 -Wall -march=native" ./configure


but when i do the make   i have no ./sgminer created

do you have an idea what i miss?

Quote

root@smos-1:/opt/miners/sph-sgminer_x11mod# make
fatal: No names found, cannot describe anything.
make  all-recursive
fatal: No names found, cannot describe anything.
make[1]: Entering directory `/opt/miners/sph-sgminer_x11mod'
Making all in lib
make[2]: Entering directory `/opt/miners/sph-sgminer_x11mod/lib'
  GEN    signal.h
  GEN    string.h
make  all-recursive
make[3]: Entering directory `/opt/miners/sph-sgminer_x11mod/lib'
make[4]: Entering directory `/opt/miners/sph-sgminer_x11mod/lib'
make[4]: Nothing to be done for `all-am'.
make[4]: Leaving directory `/opt/miners/sph-sgminer_x11mod/lib'
make[3]: Leaving directory `/opt/miners/sph-sgminer_x11mod/lib'
make[2]: Leaving directory `/opt/miners/sph-sgminer_x11mod/lib'
Making all in compat
make[2]: Entering directory `/opt/miners/sph-sgminer_x11mod/compat'
Making all in jansson-2.5
make[3]: Entering directory `/opt/miners/sph-sgminer_x11mod/compat/jansson-2.5'
make  all-recursive
make[4]: Entering directory `/opt/miners/sph-sgminer_x11mod/compat/jansson-2.5'
Making all in src
make[5]: Entering directory `/opt/miners/sph-sgminer_x11mod/compat/jansson-2.5/src'
  CC     dump.lo
  CC     error.lo
  CC     hashtable.lo
  CC     load.lo
  CC     memory.lo
  CC     pack_unpack.lo
  CC     strbuffer.lo
  CC     strconv.lo
  CC     value.lo
  CCLD   libjansson.la
make[5]: Leaving directory `/opt/miners/sph-sgminer_x11mod/compat/jansson-2.5/src'
make[5]: Entering directory `/opt/miners/sph-sgminer_x11mod/compat/jansson-2.5'
make[5]: Leaving directory `/opt/miners/sph-sgminer_x11mod/compat/jansson-2.5'
make[4]: Leaving directory `/opt/miners/sph-sgminer_x11mod/compat/jansson-2.5'
make[3]: Leaving directory `/opt/miners/sph-sgminer_x11mod/compat/jansson-2.5'
make[3]: Entering directory `/opt/miners/sph-sgminer_x11mod/compat'
make[3]: Nothing to be done for `all-am'.
make[3]: Leaving directory `/opt/miners/sph-sgminer_x11mod/compat'
make[2]: Leaving directory `/opt/miners/sph-sgminer_x11mod/compat'
Making all in ccan
make[2]: Entering directory `/opt/miners/sph-sgminer_x11mod/ccan'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/opt/miners/sph-sgminer_x11mod/ccan'
Making all in sph
make[2]: Entering directory `/opt/miners/sph-sgminer_x11mod/sph'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/opt/miners/sph-sgminer_x11mod/sph'
fatal: No names found, cannot describe anything.
make[2]: Entering directory `/opt/miners/sph-sgminer_x11mod'
  CC     sgminer-sgminer.o
sgminer.c: In function ‚set_difficulty_multiplier‚:
sgminer.c:1091: warning: comparison of distinct pointer types lacks a cast
sgminer.c: In function ‚calc_diff‚:
sgminer.c:3041: warning: unused variable ‚uintdiff‚
sgminer.c: In function ‚app_restart‚:
sgminer.c:3246: warning: passing argument 2 of ‚execv‚ from incompatible pointer type
/usr/include/unistd.h:558: note: expected ‚char * const*‚ but argument is of type ‚const char * const*‚
sgminer.c: In function ‚rebuild_nonce‚:
sgminer.c:6182: warning: implicit declaration of function ‚qubitcoin_regenhash‚
sgminer.c:6185: warning: implicit declaration of function ‚quarkcoin_regenhash‚
sgminer.c:6188: warning: implicit declaration of function ‚myriadcoin_groestl_regenhash‚
sgminer.c:6191: warning: implicit declaration of function ‚fuguecoin_regenhash‚
sgminer.c:6194: warning: implicit declaration of function ‚inkcoin_regenhash‚
sgminer.c:6197: warning: implicit declaration of function ‚animecoin_regenhash‚
sgminer.c:6200: warning: implicit declaration of function ‚groestlcoin_regenhash‚
sgminer.c:6203: warning: implicit declaration of function ‚sifcoin_regenhash‚
sgminer.c:6206: warning: implicit declaration of function ‚twecoin_regenhash‚
sgminer.c:6214: warning: implicit declaration of function ‚marucoin_regenhash‚
  CC     sgminer-api.o
api.c: In function ‚api‚:
api.c:3740: warning: ‚isjoin‚ may be used uninitialized in this function
api.c:3732: warning: ‚cmdsbuf‚ may be used uninitialized in this function
  CC     sgminer-util.o
  CC     sgminer-sha2.o
  CC     sgminer-logging.o
  CC     sgminer-driver-opencl.o
driver-opencl.c: In function ‚queue_sph_kernel‚:
driver-opencl.c:1205: warning: unused variable ‚midstate‚
driver-opencl.c: In function ‚queue_x11mod_kernel‚:
driver-opencl.c:1226: warning: unused variable ‚num‚
driver-opencl.c:1224: warning: unused variable ‚midstate‚
driver-opencl.c: In function ‚queue_nist5_kernel‚:
driver-opencl.c:1269: warning: unused variable ‚num‚
driver-opencl.c:1267: warning: unused variable ‚midstate‚
driver-opencl.c: In function ‚queue_x13mod_kernel‚:
driver-opencl.c:1301: warning: unused variable ‚num‚
driver-opencl.c:1299: warning: unused variable ‚midstate‚
driver-opencl.c: In function ‚queue_x13modold_kernel‚:
driver-opencl.c:1348: warning: unused variable ‚num‚
driver-opencl.c:1346: warning: unused variable ‚midstate‚
  CC     sgminer-ocl.o
  CC     sgminer-findnonce.o
  CC     sgminer-adl.o
adl.c: In function ‚init_adl‚:
adl.c:329: warning: unused variable ‚iNumDisplays‚
adl.c: At top level:
adl.c:124: warning: ‚lpAdlDisplayInfo‚ defined but not used
  CC     sgminer-scrypt.o
  CC     sgminer-darkcoin.o
darkcoin.c: In function ‚darkcoin_regenhash‚:
darkcoin.c:174: warning: unused variable ‚scratchbuf‚
darkcoin.c: In function ‚scanhash_darkcoin‚:
darkcoin.c:189: warning: unused variable ‚scratchbuf‚
  CC     sgminer-qubitcoin.o
qubitcoin.c: In function ‚qubitcoin_regenhash‚:
qubitcoin.c:138: warning: unused variable ‚scratchbuf‚
qubitcoin.c: In function ‚scanhash_qubitcoin‚:
qubitcoin.c:153: warning: unused variable ‚scratchbuf‚
  CC     sgminer-quarkcoin.o
quarkcoin.c: In function ‚quarkcoin_regenhash‚:
quarkcoin.c:174: warning: unused variable ‚scratchbuf‚
quarkcoin.c: In function ‚scanhash_quarkcoin‚:
quarkcoin.c:189: warning: unused variable ‚scratchbuf‚
  CC     sgminer-myriadcoin-groestl.o
myriadcoin-groestl.c: In function ‚myriadcoin_groestl_regenhash‚:
myriadcoin-groestl.c:102: warning: unused variable ‚scratchbuf‚
myriadcoin-groestl.c: In function ‚scanhash_myriadcoin_groestl‚:
myriadcoin-groestl.c:117: warning: unused variable ‚scratchbuf‚
  CC     sgminer-fuguecoin.o
fuguecoin.c: In function ‚fuguecoin_regenhash‚:
fuguecoin.c:88: warning: unused variable ‚scratchbuf‚
fuguecoin.c: In function ‚scanhash_fuguecoin‚:
fuguecoin.c:103: warning: unused variable ‚scratchbuf‚
  CC     sgminer-inkcoin.o
inkcoin.c: In function ‚inkcoin_regenhash‚:
inkcoin.c:96: warning: unused variable ‚scratchbuf‚
inkcoin.c: In function ‚scanhash_inkcoin‚:
inkcoin.c:124: warning: implicit declaration of function ‚xhash‚
inkcoin.c:111: warning: unused variable ‚scratchbuf‚
  CC     sgminer-animecoin.o
animecoin.c: In function ‚animecoin_regenhash‚:
animecoin.c:174: warning: unused variable ‚scratchbuf‚
animecoin.c: In function ‚scanhash_animecoin‚:
animecoin.c:189: warning: unused variable ‚scratchbuf‚
  CC     sgminer-groestlcoin.o
groestlcoin.c: In function ‚groestlhash‚:
groestlcoin.c:57: warning: unused variable ‚ctx_sha2‚
groestlcoin.c: In function ‚groestlcoin_regenhash‚:
groestlcoin.c:102: warning: unused variable ‚scratchbuf‚
groestlcoin.c: In function ‚scanhash_groestlcoin‚:
groestlcoin.c:117: warning: unused variable ‚scratchbuf‚
  CC     sgminer-sifcoin.o
sifcoin.c: In function ‚sifcoin_regenhash‚:
sifcoin.c:129: warning: unused variable ‚scratchbuf‚
sifcoin.c: In function ‚scanhash_sifcoin‚:
sifcoin.c:144: warning: unused variable ‚scratchbuf‚
  CC     sgminer-twecoin.o
twecoin.c: In function ‚twecoin_regenhash‚:
twecoin.c:115: warning: unused variable ‚scratchbuf‚
twecoin.c: In function ‚scanhash_twecoin‚:
twecoin.c:130: warning: unused variable ‚scratchbuf‚
  CC     sgminer-marucoin.o
marucoin.c: In function ‚marucoin_regenhash‚:
marucoin.c:187: warning: unused variable ‚scratchbuf‚
marucoin.c: In function ‚scanhash_marucoin‚:
marucoin.c:202: warning: unused variable ‚scratchbuf‚
  CC     sgminer-nist5.o
nist5.c: In function ‚nist5_regenhash‚:
nist5.c:139: warning: unused variable ‚scratchbuf‚
nist5.c: In function ‚scanhash_nist5‚:
nist5.c:154: warning: unused variable ‚scratchbuf‚
  CCLD   sgminer
make[2]: Leaving directory `/opt/miners/sph-sgminer_x11mod'
make[1]: Leaving directory `/opt/miners/sph-sgminer_x11mod'
root@smos-1:/opt/miners/sph-sgminer_x11mod#



Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: intotherain on June 23, 2014, 09:57:50 AM
got 4.400 my r9 280x toxic. thank you. :-*

Is that on windows 32 or 64 ?  (Does it mater, using 32/64?)
windows 7 64bit


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: SolarFox on June 23, 2014, 10:15:57 AM
@DJM34

Mining with x11modTahitiglg2tc8262w256l4.bin generated with this new miner is a little slower than with *.bin generated with "x11x13mod_03_06_2014" miner.

but check it... Maybe it`s only me.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: DedRes on June 23, 2014, 10:22:56 AM
Are you all here such a f* snobs?
Asked a question but nobody bothers to drop a word for it.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: atp1916 on June 23, 2014, 10:28:16 AM
Hi, guys.
Hi
I'm a newbie in mining and I'd highly appreciate some help with the sgminer on win7
For some reason I'm unable to get connected to any pool (I tried several).
Drivers are 14.6

And here's how it runs:

D:\ISR\sgminer_14.6_fixed\kernel>setx GPU_MAX_ALLOC_PERCENT 100
SUCCESS: Specified value was saved.
D:\ISR\sgminer_14.6_fixed\kernel>setx GPU_USE_SYNC_OBJECTS 1
SUCCESS: Specified value was saved.
D:\ISR\sgminer_14.6_fixed\kernel>
D:\ISR\sgminer_14.6_fixed\kernel>..\sgminer.exe --kernel x11mod -g 1 -w 128 -I 18 -o stratum+tcp://west01.us.trademybit.com:4440 -u xxxxxx.1 -p x --no-submit-stale --verbose

--text-only
[13:54:16] Started sgminer 4.1.0
[13:54:17] CL Platform 0 vendor: Advanced Micro Devices, Inc.
[13:54:17] CL Platform 0 name: AMD Accelerated Parallel Processing
[13:54:17] CL Platform 0 version: OpenCL 1.2 AMD-APP (1526.3)
[13:54:17] Platform 0 devices: 1
[13:54:17]      0       Caicos
[13:54:17] Number of ADL devices: 1
[13:54:18] ATI ADL Overdrive5 API found.
[13:54:18] ATI ADL Overdrive6 API found.
[13:54:18] Found 4 ADL adapters
[13:54:18] ADL index 0, id 321458240 - BIOS partno.: BR41330.001, version: 013.0
09.000.010, date: 2011/07/20 06:08
[13:54:18] GPU 0 assigned: iAdapterIndex:0 iPresent:1 strUDID:PCI_VEN_1002&DEV_6760&SUBSYS_161E103C&REV_00_4&2179970E&0&0008A iBusNumber:1 iDeviceNumber:0 iFunctionNumber:0

iVendorID:1002 name:AMD Radeon HD 7400M Series
[13:54:18] ADL index 1, id 321458240 - BIOS partno.: BR41330.001, version: 013.0
09.000.010, date: 2011/07/20 06:08
[13:54:18] ADL index 2, id 321458240 - BIOS partno.: BR41330.001, version: 013.0
09.000.010, date: 2011/07/20 06:08
[13:54:18] ADL index 3, id 321458240 - BIOS partno.: BR41330.001, version: 013.0
09.000.010, date: 2011/07/20 06:08
[13:54:18] GPU 0 AMD Radeon HD 7400M Series hardware monitoring enabled
[13:54:18] ADL GPU 0 is Adapter index 0 and maps to adapter id 321458240
[13:54:18] GPU 0 BIOS partno.: BR41330.001, version: 013.009.000.010, date: 2011/07/20 06:08
[13:54:18] Failed to ADL_Overdrive5_FanSpeed_Get for default value
[13:54:18] Init GPU thread 0 GPU 0 virtual GPU 0
[13:54:18] CL Platform vendor: Advanced Micro Devices, Inc.
[13:54:18] CL Platform name: AMD Accelerated Parallel Processing
[13:54:18] CL Platform version: OpenCL 1.2 AMD-APP (1526.3)
[13:54:18] List of devices:
[13:54:18]      0       Caicos
[13:54:18] Selected 0: Caicos
[13:54:18] Kernel x11mod is experimental.
[13:55:15] Initialising kernel x11mod.cl with bitalign, 1 vectors and worksize 128
[13:55:15] initCl() finished. Found Caicos
[13:55:15] Probing for an alive pool
[13:55:15] Testing Pool 0
[13:55:25] Waiting for work to be available from pools.
[13:55:25] Setting GPUs to idle performance.
[13:55:58] Closing socket for stratum Pool 0
[13:56:15] No servers were found that could be used to get work from.

[13:56:15] Please check the details from the list below of the servers you have input
[13:56:15] Most likely you have input the wrong URL, forgotten to add a port, or  have not set up workers
[13:56:15] Pool: 0  URL: stratum+tcp://west01.us.trademybit.com:4440  User: xxxxxx.1  Password: x
[13:56:15] No servers could be used! Exiting.


Where am I wrong with that?
Thanks in advance


For posterity, here was the post that contained the question.

You did update to the "fixed" SGMiner that the OP updated to, right?  

It would appear that your miner is connecting just fine to the actual pool (as it is waiting for work to be available), and by extension your worker (maybe).. but dying because no work was found.  As such, i would rule out a config error wrt to the hardware.  You did do your workers on the pool(s) right, right?


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: thefrog on June 23, 2014, 10:28:56 AM
Are you all here such a f* snobs?
Asked a question but nobody bothers to drop a word for it.


? what was the question again ?

running 280x at 4.2 with this release, linux. I can answer linux related stuff, but not windows.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: atp1916 on June 23, 2014, 10:31:34 AM
Are you all here such a f* snobs?
Asked a question but nobody bothers to drop a word for it.


? what was the question again ?

running 280x at 4.2 with this release, linux. I can answer linux related stuff, but not windows.


It got buried couple pages back, i brought it back above your post.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: bullus on June 23, 2014, 10:49:52 AM
Hi, guys.
Hi
I'm a newbie in mining and I'd highly appreciate some help with the sgminer on win7
For some reason I'm unable to get connected to any pool (I tried several).
Drivers are 14.6

And here's how it runs:

D:\ISR\sgminer_14.6_fixed\kernel>setx GPU_MAX_ALLOC_PERCENT 100
SUCCESS: Specified value was saved.
D:\ISR\sgminer_14.6_fixed\kernel>setx GPU_USE_SYNC_OBJECTS 1
SUCCESS: Specified value was saved.
D:\ISR\sgminer_14.6_fixed\kernel>
D:\ISR\sgminer_14.6_fixed\kernel>..\sgminer.exe --kernel x11mod -g 1 -w 128 -I 18 -o stratum+tcp://west01.us.trademybit.com:4440 -u xxxxxx.1 -p x --no-submit-stale --verbose

--text-only
[13:54:16] Started sgminer 4.1.0
[13:54:17] CL Platform 0 vendor: Advanced Micro Devices, Inc.
[13:54:17] CL Platform 0 name: AMD Accelerated Parallel Processing
[13:54:17] CL Platform 0 version: OpenCL 1.2 AMD-APP (1526.3)
[13:54:17] Platform 0 devices: 1
[13:54:17]      0       Caicos
[13:54:17] Number of ADL devices: 1
[13:54:18] ATI ADL Overdrive5 API found.
[13:54:18] ATI ADL Overdrive6 API found.
[13:54:18] Found 4 ADL adapters
[13:54:18] ADL index 0, id 321458240 - BIOS partno.: BR41330.001, version: 013.0
09.000.010, date: 2011/07/20 06:08
[13:54:18] GPU 0 assigned: iAdapterIndex:0 iPresent:1 strUDID:PCI_VEN_1002&DEV_6760&SUBSYS_161E103C&REV_00_4&2179970E&0&0008A iBusNumber:1 iDeviceNumber:0 iFunctionNumber:0

iVendorID:1002 name:AMD Radeon HD 7400M Series
[13:54:18] ADL index 1, id 321458240 - BIOS partno.: BR41330.001, version: 013.0
09.000.010, date: 2011/07/20 06:08
[13:54:18] ADL index 2, id 321458240 - BIOS partno.: BR41330.001, version: 013.0
09.000.010, date: 2011/07/20 06:08
[13:54:18] ADL index 3, id 321458240 - BIOS partno.: BR41330.001, version: 013.0
09.000.010, date: 2011/07/20 06:08
[13:54:18] GPU 0 AMD Radeon HD 7400M Series hardware monitoring enabled
[13:54:18] ADL GPU 0 is Adapter index 0 and maps to adapter id 321458240
[13:54:18] GPU 0 BIOS partno.: BR41330.001, version: 013.009.000.010, date: 2011/07/20 06:08
[13:54:18] Failed to ADL_Overdrive5_FanSpeed_Get for default value
[13:54:18] Init GPU thread 0 GPU 0 virtual GPU 0
[13:54:18] CL Platform vendor: Advanced Micro Devices, Inc.
[13:54:18] CL Platform name: AMD Accelerated Parallel Processing
[13:54:18] CL Platform version: OpenCL 1.2 AMD-APP (1526.3)
[13:54:18] List of devices:
[13:54:18]      0       Caicos
[13:54:18] Selected 0: Caicos
[13:54:18] Kernel x11mod is experimental.
[13:55:15] Initialising kernel x11mod.cl with bitalign, 1 vectors and worksize 128
[13:55:15] initCl() finished. Found Caicos
[13:55:15] Probing for an alive pool
[13:55:15] Testing Pool 0
[13:55:25] Waiting for work to be available from pools.
[13:55:25] Setting GPUs to idle performance.
[13:55:58] Closing socket for stratum Pool 0
[13:56:15] No servers were found that could be used to get work from.

[13:56:15] Please check the details from the list below of the servers you have input
[13:56:15] Most likely you have input the wrong URL, forgotten to add a port, or  have not set up workers
[13:56:15] Pool: 0  URL: stratum+tcp://west01.us.trademybit.com:4440  User: xxxxxx.1  Password: x
[13:56:15] No servers could be used! Exiting.


Where am I wrong with that?
Thanks in advance


For posterity, here was the post that contained the question.

You did update to the "fixed" SGMiner that the OP updated to, right?  

It would appear that your miner is connecting just fine to the actual pool (as it is waiting for work to be available), and by extension your worker (maybe).. but dying because no work was found.  As such, i would rule out a config error wrt to the hardware.  You did do your workers on the pool(s) right, right?

The stratum west01 is offline due to problems on serverside.

Quote
2014-06-22 at 07:55pm EST: Our provider continues to have issues in their west-coast datacenter. We will be opening new west-coast servers hopefully over the enxt few days.



Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: DedRes on June 23, 2014, 10:54:43 AM


For posterity, here was the post that contained the question.

You did update to the "fixed" SGMiner that the OP updated to, right?  

It would appear that your miner is connecting just fine to the actual pool (as it is waiting for work to be available), and by extension your worker (maybe).. but dying because no work was found.  As such, i would rule out a config error wrt to the hardware.  You did do your workers on the pool(s) right, right?


Hi
Thanks for your reply and sorry for being rude.
yes, I updated to the "fixed" but tried also the original version in this thread. Both do the same.
I tried dozen of pools but it's always the same. So. I think the problem is on my side.
I Installed  14.6 drivers, perhaps something is still missing....
No idea how to proceed from this point  :-[


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: DedRes on June 23, 2014, 11:05:16 AM
[14:02:02] Pool: 0  URL: stratum+tcp://east01.us.trademybit.com:4440  User: xxxxxx.1  Password: x
[14:02:02] Press any key to exit, or sgminer will try again in 15s.
[14:02:18] Testing Pool 0
[14:02:45] Closing socket for stratum Pool 0
[14:03:18] No servers were found that could be used to get work from.
[14:03:18] Please check the details from the list below of the servers you have input
[14:03:18] Most likely you have input the wrong URL, forgotten to add a port, or  have not set up workers




Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: atp1916 on June 23, 2014, 11:30:47 AM
DedRes: when you make your worker, you don't retype your username in, right?

If you retype your username in, you'll end up with a workername that looks like this: workername.workername.xyz.  It's a common mistake.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: DedRes on June 23, 2014, 11:36:42 AM
DedRes: when you make your worker, you don't retype your username in, right?

If you retype your username in, you'll end up with a workername that looks like this: workername.workername.xyz.  It's a common mistake.

Yep, I checked that. No double names. I actually even checked some P2P pools and drk.ghash.io where the worker is created automatically.
No luck.
Perhaps you can give me some server:port and worker which is 100% OK and I'll test it. I'm pretty sure there will be the same picture, but it worth a try.

Thanks


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: atp1916 on June 23, 2014, 11:39:24 AM
DedRes: when you make your worker, you don't retype your username in, right?

If you retype your username in, you'll end up with a workername that looks like this: workername.workername.xyz.  It's a common mistake.

Yep, I checked that. No double names. I actually even checked some P2P pools and drk.ghash.io where the worker is created automatically.
No luck.
Perhaps you can give me some server:port and worker which is 100% OK and I'll test it. I'm pretty sure there will be the same picture, but it worth a try.

Thanks

Ok:  Here is my wafflepool server config.  Mining on it right now

Code:
-o stratum+tcp://useast.wafflepool.com:3331 -u 1Et8Ma3KcwoSmRogLtWgNo7oGv83mrK6T4 -p d=0.02


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: DedRes on June 23, 2014, 11:50:59 AM

Ok:  Here is my wafflepool server config.  Mining on it right now

Code:
-o stratum+tcp://useast.wafflepool.com:3331 -u 1Et8Ma3KcwoSmRogLtWgNo7oGv83mrK6T4 -p d=0.02


D:\ISR\sgminer_14.6_fixed\kernel>setx GPU_MAX_ALLOC_PERCENT 100

SUCCESS: Specified value was saved.

D:\ISR\sgminer_14.6_fixed\kernel>setx GPU_USE_SYNC_OBJECTS 1

SUCCESS: Specified value was saved.

D:\ISR\sgminer_14.6_fixed\kernel>..\sgminer.exe --kernel x11mod -o stratum+tcp://useast.wafflepool.com:3331 -u 1Et8Ma3KcwoSmRogLtWgNo7oGv83mrK6T4 -p d=0.02 --verbose --text-only
[14:46:50] Started sgminer 4.1.0
[14:46:50] CL Platform 0 vendor: Advanced Micro Devices, Inc.
[14:46:50] CL Platform 0 name: AMD Accelerated Parallel Processing
[14:46:50] CL Platform 0 version: OpenCL 1.2 AMD-APP (1526.3)
[14:46:50] Platform 0 devices: 1
[14:46:50]      0       Caicos
[14:46:50] Number of ADL devices: 1
[14:46:51] ATI ADL Overdrive5 API found.
[14:46:51] ATI ADL Overdrive6 API found.
[14:46:51] Found 4 ADL adapters
[14:46:51] ADL index 0, id 53022400 - BIOS partno.: BR41330.001, version: 013.009.000.010, date: 2011/07/20 06:08
[14:46:51] GPU 0 assigned: iAdapterIndex:0 iPresent:1 strUDID:PCI_VEN_1002&DEV_6760&SUBSYS_161E103C&REV_00_4&2179970E&0&0008A iBusNumber:1 iDeviceNumber:0 iFunctionNumber:0 iVendorID:1002 name:AMD Radeon HD 7400M Series
[14:46:51] ADL index 1, id 53022400 - BIOS partno.: BR41330.001, version: 013.009.000.010, date: 2011/07/20 06:08
[14:46:51] ADL index 2, id 53022400 - BIOS partno.: BR41330.001, version: 013.009.000.010, date: 2011/07/20 06:08
[14:46:51] ADL index 3, id 53022400 - BIOS partno.: BR41330.001, version: 013.009.000.010, date: 2011/07/20 06:08
[14:46:51] GPU 0 AMD Radeon HD 7400M Series hardware monitoring enabled
[14:46:51] ADL GPU 0 is Adapter index 0 and maps to adapter id 53022400
[14:46:51] GPU 0 BIOS partno.: BR41330.001, version: 013.009.000.010, date: 2011/07/20 06:08
[14:46:51] Failed to ADL_Overdrive5_FanSpeed_Get for default value
[14:46:51] Init GPU thread 0 GPU 0 virtual GPU 0
[14:46:51] CL Platform vendor: Advanced Micro Devices, Inc.
[14:46:51] CL Platform name: AMD Accelerated Parallel Processing
[14:46:51] CL Platform version: OpenCL 1.2 AMD-APP (1526.3)
[14:46:51] List of devices:
[14:46:51]      0       Caicos
[14:46:51] Selected 0: Caicos
[14:46:51] Kernel x11mod is experimental.
[14:47:44] Initialising kernel x11mod.cl with bitalign, 1 vectors and worksize 256
[14:47:44] initCl() finished. Found Caicos
[14:47:44] Probing for an alive pool
[14:47:44] Testing Pool 0
[14:47:45] Pool 0 difficulty changed to 0.160
[14:47:54] Waiting for work to be available from pools.
[14:47:54] Setting GPUs to idle performance.
[14:48:14] Closing socket for stratum Pool 0
[14:48:44] No servers were found that could be used to get work from.
[14:48:44] Please check the details from the list below of the servers you have input
[14:48:44] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers
[14:48:44] Pool: 0  URL: stratum+tcp://useast.wafflepool.com:3331  User: 1Et8Ma3KcwoSmRogLtWgNo7oGv83mrK6T4  Password: d=0.02
[14:48:44] No servers could be used! Exiting.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: atp1916 on June 23, 2014, 12:00:02 PM
Something is definitely borked on your end, Dedres.

You do have a tunnel for your miner through any sort of firewall you're running?


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: DedRes on June 23, 2014, 12:06:26 PM
Something is definitely borked on your end, Dedres.

You do have a tunnel for your miner through any sort of firewall you're running?

No FW is running on the computer but there may be some filter on the ISP side. I don't really know how to check that.

BTW, here's the info from the GPU. I realized the device is actually 6760 while the name says 7400M series. Not sure if it makes any difference.

Name   AMD Radeon HD 7400M Series
PNP Device ID   PCI\VEN_1002&DEV_6760&SUBSYS_161E103C&REV_00\4&2179970E&0&0008
Adapter Type   ATI display adapter (0x6760), Advanced Micro Devices, Inc. compatible
Adapter Description   AMD Radeon HD 7400M Series
Adapter RAM   1.00 GB (1,073,741,824 bytes)
Installed Drivers   aticfx64.dll,aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,aticfx32,atiumd64.dll,atidxx64.dll,atidxx64.dll,atiumdag,atidxx32,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll
Driver Version   14.200.0.0
Driver   c:\windows\system32\drivers\atikmpag.sys (8.14.1.6387, 544.00 KB (557,056 bytes), 5/23/2014 4:11 AM)


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: bullus on June 23, 2014, 02:14:52 PM
Something is definitely borked on your end, Dedres.

You do have a tunnel for your miner through any sort of firewall you're running?

No FW is running on the computer but there may be some filter on the ISP side. I don't really know how to check that.

BTW, here's the info from the GPU. I realized the device is actually 6760 while the name says 7400M series. Not sure if it makes any difference.

Name   AMD Radeon HD 7400M Series
PNP Device ID   PCI\VEN_1002&DEV_6760&SUBSYS_161E103C&REV_00\4&2179970E&0&0008
Adapter Type   ATI display adapter (0x6760), Advanced Micro Devices, Inc. compatible
Adapter Description   AMD Radeon HD 7400M Series
Adapter RAM   1.00 GB (1,073,741,824 bytes)
Installed Drivers   aticfx64.dll,aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,aticfx32,atiumd64.dll,atidxx64.dll,atidxx64.dll,atiumdag,atidxx32,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll
Driver Version   14.200.0.0
Driver   c:\windows\system32\drivers\atikmpag.sys (8.14.1.6387, 544.00 KB (557,056 bytes), 5/23/2014 4:11 AM)


Then u need x13mod-old.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: TR8888 on June 23, 2014, 02:16:50 PM
Works a treat, Thanks  :)


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: splawik21 on June 23, 2014, 03:01:31 PM
I can also confirm that the openCL file copy method works on 14.4 / 13.12 with 290s and 270s.  Just deleted old bins and extra hash is there.

Here is a shot of the AMD openCL files i pulled:
http://i59.tinypic.com/2chuatd.jpg

Edit: I am noticing 13.12 rigs are slower than the 14.4 / 14.6 rigs (maybe).  May need minimum 14.4 to make this work.  Testing now...  No difference with 13.12 vs 14.4/14.6 with same settings.


after puting all selected files here and changing parametr to g1 in conf file I finally get mine 4,2MHs Ufffff :)


My conf:

@ECHO --------------------------------------------------------------
timeout /t 15
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
COLOR 0E

sgminer.exe -k x11mod -o stratum+tcp://drk.coinmine.pl:6090 -u user -p xxx -g 1 -w 64 -I 13 --lookup-gap 2 --thread-concurrency 8191 --gpu-memclock 1500 --gpu-engine 1090 --temp-target 70 --temp-overheat 80 --temp-cutoff 82 --gpu-powertune -15 --gpu-fan auto --failover-only --expiry 20 --scan-time 10 --queue 0 --no-submit-stale



NOOOOOOOOOOOOOOOO I`ve just saw I get all HW errors ... helllllllp me.....

EDIT2. Added bin files for x11 and x13 which I`ve found on pages before and works cool....on 2 gpu 280x I`m getting 13,3 MHs
bin files here: https://bitcointalk.org/index.php?topic=658411.msg7429385#msg7429385 (https://bitcointalk.org/index.php?topic=658411.msg7429385#msg7429385)


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: thefrog on June 23, 2014, 03:42:29 PM

Ok:  Here is my wafflepool server config.  Mining on it right now

Code:
-o stratum+tcp://useast.wafflepool.com:3331 -u 1Et8Ma3KcwoSmRogLtWgNo7oGv83mrK6T4 -p d=0.02


D:\ISR\sgminer_14.6_fixed\kernel>setx GPU_MAX_ALLOC_PERCENT 100

SUCCESS: Specified value was saved.

D:\ISR\sgminer_14.6_fixed\kernel>setx GPU_USE_SYNC_OBJECTS 1

SUCCESS: Specified value was saved.

D:\ISR\sgminer_14.6_fixed\kernel>..\sgminer.exe --kernel x11mod -o stratum+tcp://useast.wafflepool.com:3331 -u 1Et8Ma3KcwoSmRogLtWgNo7oGv83mrK6T4 -p d=0.02 --verbose --text-only
[14:46:50] Started sgminer 4.1.0
[14:46:50] CL Platform 0 vendor: Advanced Micro Devices, Inc.
[14:46:50] CL Platform 0 name: AMD Accelerated Parallel Processing
[14:46:50] CL Platform 0 version: OpenCL 1.2 AMD-APP (1526.3)
[14:46:50] Platform 0 devices: 1
[14:46:50]      0       Caicos
[14:46:50] Number of ADL devices: 1
[14:46:51] ATI ADL Overdrive5 API found.
[14:46:51] ATI ADL Overdrive6 API found.
[14:46:51] Found 4 ADL adapters
[14:46:51] ADL index 0, id 53022400 - BIOS partno.: BR41330.001, version: 013.009.000.010, date: 2011/07/20 06:08
[14:46:51] GPU 0 assigned: iAdapterIndex:0 iPresent:1 strUDID:PCI_VEN_1002&DEV_6760&SUBSYS_161E103C&REV_00_4&2179970E&0&0008A iBusNumber:1 iDeviceNumber:0 iFunctionNumber:0 iVendorID:1002 name:AMD Radeon HD 7400M Series
[14:46:51] ADL index 1, id 53022400 - BIOS partno.: BR41330.001, version: 013.009.000.010, date: 2011/07/20 06:08
[14:46:51] ADL index 2, id 53022400 - BIOS partno.: BR41330.001, version: 013.009.000.010, date: 2011/07/20 06:08
[14:46:51] ADL index 3, id 53022400 - BIOS partno.: BR41330.001, version: 013.009.000.010, date: 2011/07/20 06:08
[14:46:51] GPU 0 AMD Radeon HD 7400M Series hardware monitoring enabled
[14:46:51] ADL GPU 0 is Adapter index 0 and maps to adapter id 53022400
[14:46:51] GPU 0 BIOS partno.: BR41330.001, version: 013.009.000.010, date: 2011/07/20 06:08
[14:46:51] Failed to ADL_Overdrive5_FanSpeed_Get for default value
[14:46:51] Init GPU thread 0 GPU 0 virtual GPU 0
[14:46:51] CL Platform vendor: Advanced Micro Devices, Inc.
[14:46:51] CL Platform name: AMD Accelerated Parallel Processing
[14:46:51] CL Platform version: OpenCL 1.2 AMD-APP (1526.3)
[14:46:51] List of devices:
[14:46:51]      0       Caicos
[14:46:51] Selected 0: Caicos
[14:46:51] Kernel x11mod is experimental.
[14:47:44] Initialising kernel x11mod.cl with bitalign, 1 vectors and worksize 256
[14:47:44] initCl() finished. Found Caicos
[14:47:44] Probing for an alive pool
[14:47:44] Testing Pool 0
[14:47:45] Pool 0 difficulty changed to 0.160
[14:47:54] Waiting for work to be available from pools.
[14:47:54] Setting GPUs to idle performance.
[14:48:14] Closing socket for stratum Pool 0
[14:48:44] No servers were found that could be used to get work from.
[14:48:44] Please check the details from the list below of the servers you have input
[14:48:44] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers
[14:48:44] Pool: 0  URL: stratum+tcp://useast.wafflepool.com:3331  User: 1Et8Ma3KcwoSmRogLtWgNo7oGv83mrK6T4  Password: d=0.02
[14:48:44] No servers could be used! Exiting.

\
Try to change -p xxx
just xxx instead what you have now.

try to use -o stratum+tcp://ca.p2pool.sk:7903 -u <whateverdarkcoinaddress> -p xxx

just to see if you get some work.



Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: trankil on June 23, 2014, 05:15:28 PM
could someone try help me https://bitcointalk.org/index.php?topic=658411.msg7465165#msg7465165

i do the make and the .sgminer  don't be create


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: steveperry on June 23, 2014, 05:56:29 PM
running a 290 and two 290x, using the 14.4 drivers and not getting any better results than with the miner i was currently using.


they are running @ 3.75M x 2 and 3.4M,

using

"intensity" : "18",
"worksize" : "256",
"kernel" : "x11mod",
"lookup-gap" : "2",
"thread-concurrency" : "32765",
"shaders" : "0",
"gpu-threads" : "2",
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "1",
"failover-switch-delay" : "300",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"log" : "5",
"no-pool-disable" : true,
"queue" : "0",
"scan-time" : "1",
"tcp-keepalive" : "30",
"temp-hysteresis" : "3",
"shares" : "0",
"vectors" : "1",
"no-submit-stale" : true,
"kernel-path" : "/usr/local/bin"


running core and memory @ 1000 and 1250, because thats what my baseline is.  I will adjust that once I figure out problem.

any ideas on why it's not faster? thanks

edit -- i installed the 14.6 drivers and that boosted the speed to 4.2M and 3.5. not a huge jump but i'll take it.  still would like to hear tips to improve


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: happoman on June 23, 2014, 06:12:54 PM
[14:02:02] Pool: 0  URL: stratum+tcp://east01.us.trademybit.com:4440  User: xxxxxx.1  Password: x
[14:02:02] Press any key to exit, or sgminer will try again in 15s.
[14:02:18] Testing Pool 0
[14:02:45] Closing socket for stratum Pool 0
[14:03:18] No servers were found that could be used to get work from.
[14:03:18] Please check the details from the list below of the servers you have input
[14:03:18] Most likely you have input the wrong URL, forgotten to add a port, or  have not set up workers




Same problem here.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: L3pje on June 23, 2014, 07:14:10 PM
First try with this new miner.
I was running at 3.6MH per Gigabyte Windforce 290

Downloaded this driver:
http://www.guru3d.com/files_details/amd_catalyst_14_6_rc_(14_200_1004_june_2)_download.html

They do get 10 degrees hotter but:

http://i.gyazo.com/31c47468b810d22ecd4c795cb37f7db2.png


setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
sgminer.exe -k x11mod -o stratum+tcp://multipool.minerals.pro:7777 -u X -p X -I 16 -g 4 --shaders 2048 -w 256  --lookup-gap 2 --gpu-engine 1050 --gpu-memclock 1350 --thread-concurrency 8192 --expiry 1


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: xgtele on June 23, 2014, 07:55:26 PM
got 4.400 my r9 280x toxic. thank you. :-*

Could you please upload your generated r9 280x toxic .bin file to mega and post a link here? Thanks


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: nwls31 on June 23, 2014, 07:57:13 PM
Great job, my Powercolor 280x have gone from 3.4 Mh/s to 4.3 M/hs using this and just by moving those 8 files from the 14.6 directory, rather than the full driver update.

My config. is as follows if anyone is struggling :

Quote
"kernel" : "x11mod",
"intensity" : "20",
"vectors": "1",
"thread-concurrency" : "8193",
"worksize" : "256",
"lookup-gap" : "2",
"gpu-threads" : "2",
"gpu-engine" : "1150",
"gpu-fan" : "30-95",
"gpu-memclock" : "1550",
"gpu-memdiff" : "0,0,0,0",
"gpu-powertune" : "20",
"temp-cutoff" : "90",
"temp-overheat" : "85",
"temp-target" : "65",
"shaders" : "2048",
"api-allow" : "127.0.0.1,192.168.1/24",
"api-listen" : "true",
"api-mcast-port" : "4028",
"api-port" : "4028",
"auto-fan" : "true",
"expiry" : "1",
"nfactor": "11",
"failover-only" : "true",
"gpu-dyninterval" : "7",
"gpu-platform" : "1",
"log" : "5",
"log-dateformat" : "0",
"no-pool-disable" : true,
"no-submit-stale" : true,
"queue" : "0",
"scan-time" : "1",
"tcp-keepalive" : "30",
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
}

http://i76.photobucket.com/albums/j36/hlxbravo/Noname.jpg (http://s76.photobucket.com/user/hlxbravo/media/Noname.jpg.html)



 ;)


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: DriverDan on June 23, 2014, 09:27:26 PM
Has anyone checked if this increases utilization / increases power? Someone said temp went up so that would seem to indicate power draw is up.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: jimlite on June 23, 2014, 09:37:43 PM
Anyone worried about the trojan hits on virustotal?


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: jimlite on June 23, 2014, 09:44:28 PM
OP djm's mega link doesn't' work.
Kozmos link fails virustotal.
Can OP post link again?


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: zing96 on June 23, 2014, 11:27:25 PM
OP djm's mega link doesn't' work.
Kozmos link fails virustotal.
Can OP post link again?

OP's link does work...just not formatted correctly.

https://mega.co.nz/#!hZUAzQDQ!GrLynWXGP5wFIiDmFpXnTiXV-AI_bkXEFfQrJpbwF1o (https://mega.co.nz/#!hZUAzQDQ!GrLynWXGP5wFIiDmFpXnTiXV-AI_bkXEFfQrJpbwF1o)


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: jimlite on June 24, 2014, 01:32:18 AM
Oh, should have seen the different color in the link.
So I downloaded it, and virustotalled it.
DOESN'T THIS CONCERN ANYONE?

AntiVir    APPL/Bitcoinminer.Gen    20140623
Baidu-International    Hacktool.Win32.BitCoinMiner.BBF    20140623
DrWeb    Tool.BtcMine.141    20140623
ESET-NOD32    a variant of Win32/BitCoinMiner.BF    20140623
K7AntiVirus    Trojan ( 00494bd01 )    20140623           MAINLY THESE TROJANS, not the bitcoinminer!
K7GW    Trojan ( 00494bd01 )    20140623
Sophos    Generic PUA GF    20140623
Symantec    WS.Reputation.1    20140623
TrendMicro-HouseCall    Suspicious_GEN.F47V0620    20140623


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: Bojcha on June 24, 2014, 02:04:33 AM
what about 5xxx/6xxx cards?


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: daeminium on June 24, 2014, 02:07:45 AM
?????

http://s2.subirimagenes.com/fotos/previo/thump_8968140virussgminer.jpg (http://www.subirimagenes.com/fotos-virussgminer-8968140.html)


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: the_g00se on June 24, 2014, 05:02:17 AM
Thread explaining how to update to 14.6b and compile on BAMT can be found here:  http://www.reddit.com/r/BAMT/comments/28xu3i/add_amd_146_drivers_and_djm34s_optimized_sgminer/ (http://www.reddit.com/r/BAMT/comments/28xu3i/add_amd_146_drivers_and_djm34s_optimized_sgminer/)


Achieving 2.7mh/R9270 with this version!  16mh for the rig. Thank you djm34!!



Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: planeswalker on June 24, 2014, 05:03:08 AM
If anyone had issues with "locked clock" speeds, I figured out what was causing mine.  One of my rigs has 4x 290x cards in it.  MSI afterburner recently expired, so I upgraded to the latest beta.  This upgrade didn't keep the "enable unofficial overclocking" setting to whatever you had it before.  I re-enabled it, bam, I can change core/mem clock speeds and not have my cards crash at the defaults.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: DedRes on June 24, 2014, 05:06:51 AM

Then u need x13mod-old.

I tried it and got an Error (both x13mod and x13modold):
[08:01:59] Error -11: Building Program (clBuildProgram)
[08:01:59] "C:\Users\leonz\AppData\Local\Temp\OCL352T5.cl", line 1106: error: identifier
          "buf" is undefined
          INPUT_BIG;
          ^

"C:\Users\leonz\AppData\Local\Temp\OCL352T5.cl", line 1112: error: identifier          "buf" is undefined



Try to change -p xxx
just xxx instead what you have now.

try to use -o stratum+tcp://ca.p2pool.sk:7903 -u <whateverdarkcoinaddress> -p xxx

just to see if you get some work.


Tried. No change.


Furthermore.
Today @ morning my antivirus found a trojan in the fixed version. I see people already complained about that. So, I just confirm it.
Switching to NON-fixed version now..

Any suggestion of how to get this stuff to work?


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: Litejavichu on June 24, 2014, 05:48:46 AM
what about 5xxx/6xxx cards?

Run fine in 13.12 5850hd 
I18 TC6144
If you let the sgminer compile the default kernel (tc6016) gives problems. Edit a config to tc6144

Reinstall the drivers from the windows panel, not the whole process of catalyst


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: DedRes on June 24, 2014, 09:02:34 AM
Hmm
I suspect I may have some ports filtered out.
Does anybody know the X11 pool operating on port 80, 8080 or 443?



Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: sesko on June 24, 2014, 09:34:27 AM
If this helps anybody:

2x r9 280x Vapor-x gains (using 14.6 fixed version of sgminer).

- Windows 8.1
- updated to 14.4 ATI drivers, did not gain anything.
- uninstalled drivers with DDU (highly recommended you use this to remove ATI drivers)
- Installed 14.6 ATI beta drivers (without HDMI audio drivers)

x11 data:
--- x11: 4,1Mh/s hashrate on both, it was not stable at first using old sgminer settings
   - bumped up just little GPU core, from 1060 to 1075 (at 1100 i got a lot of HW errors)
   - less undervoltage, before i was having 1,09V, now 1,11V
   - stable 48hours without HW errors
gains combined both gpu's:
   - before 6,2Mh/s......now 8,2Mh/s,   33% gain
   - electricity: before 295W..... now 315W,  7% more electric consumption.
BAT FILE BASIC SETTINGS: --thread-concurrency 8192,8191 -g 2,2 -I 18,18 -w 256,256 --auto-fan --gpu-memclock 1488,1488 --gpu-engine 1075,1075 --gpu-powertune -20,-20

x13 data:
--- x13: 3,1Mh/s on both
   - same settings and vboltage as x11
gains combined both gpu's:
   - before 5Mh/s .... now 6,2 Mh/s  20% gain
   -  electricity not measured yet
BAT FILE BASIC SETTINGS: --thread-concurrency 8192,8191 -g 2,2 -I 18,18 -w 128,128 --auto-fan --gpu-memclock 1488,1488 --gpu-engine 1075,1075 --gpu-powertune -20,-20

As you can see, only difference in settings between x11 and x13 is in worksize. Rest is the same. Trying to bumping up intensity, memclock, thread-concurrency and gpu powertune did not gave nothing more.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: innergy on June 24, 2014, 09:42:26 AM
Got 4.85MH/s stable on 290
Win 7 x64, 14.6, 1000/1300 (every higher memclock causes SICK message sooner or later, due to the known 150-1350 variance.. I think)

Quote
sgminer -k x11mod -o stratum+tcp://drk.coinmine.pl:6090 -u ... -p ... -g 1 -w 128 --lookup-gap 2 --thread-concurrency 8192 --intensity 19 --gpu-engine 1000 --gpu-memclock 1300 --gpu-powertune 20 --auto-fan --temp-target 70


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: nfox on June 24, 2014, 01:37:38 PM
Anyone tested with linux? what catalyst?


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: OPTiK on June 24, 2014, 03:09:41 PM
Any gains for r9 270? What are people hashing?


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: whocares on June 24, 2014, 03:41:26 PM
Diamond kernel doesn't work(creates ckolivas binary and throws many HW errors).
Should be great if it gets fixed cos groestlcoin kernel doesn't support DMD stratum.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: litecoinbeast on June 24, 2014, 03:56:55 PM
Any gains for r9 270? What are people hashing?

x11 ~ 2.7
x13 ~ 2.0

The sweet part being still using 13.12 drivers with 14.6 opencl dropped in to folder. So didn't have to use "modded" drivers for Win7x64 to get the 5 270x "recognized".

Was getting ~2.0 and ~1.7 respectively before.

Took about 5 mins...didn't change a thing in bat or conf file.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: kaltar on June 24, 2014, 03:58:36 PM
Well i;m posting my problem in case someone read this on a previous threads.

all my cards are hashing at the increased Hashrate, GREAT Job btw, you guys are coming up with great improvement before i can deploys the previous ones  ;D

so here is my problems, i have R9 280X and r9 270x running stable
but my Gigabyte R9 290x starts off at full speed, 5.5 mh/s on x11 but at an indeterminate time it will drop to about half speed, card restart doesn't fix this, i have to reboot.

it does this on sgminer416, and also on the sgminer5 and LSB version also. i read other people having this issue, but can't pinpoint the threads anymore.

anyone .?

thanks


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: the_g00se on June 24, 2014, 04:11:22 PM
Any gains for r9 270? What are people hashing?

x11 ~ 2.7
x13 ~ 2.0

The sweet part being still using 13.12 drivers with 14.6 opencl dropped in to folder. So didn't have to use "modded" drivers for Win7x64 to get the 5 270x "recognized".

Was getting ~2.0 and ~1.7 respectively before.

Took about 5 mins...didn't change a thing in bat or conf file.


Config for x11?


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: djm34 on June 24, 2014, 04:20:35 PM
are you speaking about my link
Oh, should have seen the different color in the link.
So I downloaded it, and virustotalled it.
DOESN'T THIS CONCERN ANYONE?

AntiVir    APPL/Bitcoinminer.Gen    20140623
Baidu-International    Hacktool.Win32.BitCoinMiner.BBF    20140623
DrWeb    Tool.BtcMine.141    20140623
ESET-NOD32    a variant of Win32/BitCoinMiner.BF    20140623
K7AntiVirus    Trojan ( 00494bd01 )    20140623           MAINLY THESE TROJANS, not the bitcoinminer!
K7GW    Trojan ( 00494bd01 )    20140623
Sophos    Generic PUA GF    20140623
Symantec    WS.Reputation.1    20140623
TrendMicro-HouseCall    Suspicious_GEN.F47V0620    20140623
Yes I am a bit surprised too by the result...
I will try to recompile and see if I get the same thing, but not for the moment.
Now as I have stated already, it is better to compile yourself than use any binaries
(and actually, that will be the last I put binaries with my release... problem solved.)


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: solo20 on June 24, 2014, 04:25:18 PM
14.6 amd drivers
I install them but when I run
sgminer it crashes any way to to fix this . do I need other files to make it work
was not crashing befor  ???


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: litecoinbeast on June 24, 2014, 04:58:32 PM
Config for x11?

Here ya go mate...basically a C & P from Lazybear or w/e his name is from x11/x13 mod release (without the hidden 2%):

Code:
"no-adl" : true,
"gpu-powertune" : "20",
"intensity" : "17",
"kernel" : "x11mod",
"vectors" : "1",
"worksize" : "128",
"gpu-threads" : "2",
"thread-concurrency" : "8192",
"lookup-gap" : "2",
"gpu-engine" : "1120",
"gpu-memclock" : "1500",
"temp-cutoff" : "85",
"temp-overheat" : "80",
"temp-target" : "66,66,70,70,70",
"api-mcast-port" : "4028",
"failover-only" : true,
"api-port" : "4028",
"expiry" : "120",
"log" : "5",
"device" : "0,1,2,3,4",
"no-pool-disable" : false,
"no-submit-stale" : true,
"queue" : "1",
"scan-time" : "30",
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin"


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: junkun13 on June 24, 2014, 05:06:07 PM
where do you put those files?

Great job, my Powercolor 280x have gone from 3.4 Mh/s to 4.3 M/hs using this and just by moving those 8 files from the 14.6 directory, rather than the full driver update.

My config. is as follows if anyone is struggling :

Quote
"kernel" : "x11mod",
"intensity" : "20",
"vectors": "1",
"thread-concurrency" : "8193",
"worksize" : "256",
"lookup-gap" : "2",
"gpu-threads" : "2",
"gpu-engine" : "1150",
"gpu-fan" : "30-95",
"gpu-memclock" : "1550",
"gpu-memdiff" : "0,0,0,0",
"gpu-powertune" : "20",
"temp-cutoff" : "90",
"temp-overheat" : "85",
"temp-target" : "65",
"shaders" : "2048",
"api-allow" : "127.0.0.1,192.168.1/24",
"api-listen" : "true",
"api-mcast-port" : "4028",
"api-port" : "4028",
"auto-fan" : "true",
"expiry" : "1",
"nfactor": "11",
"failover-only" : "true",
"gpu-dyninterval" : "7",
"gpu-platform" : "1",
"log" : "5",
"log-dateformat" : "0",
"no-pool-disable" : true,
"no-submit-stale" : true,
"queue" : "0",
"scan-time" : "1",
"tcp-keepalive" : "30",
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
}

http://i76.photobucket.com/albums/j36/hlxbravo/Noname.jpg (http://s76.photobucket.com/user/hlxbravo/media/Noname.jpg.html)



 ;)


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: nfox on June 24, 2014, 05:09:07 PM
So what files and from where you take them..?


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: cryptoangel on June 24, 2014, 05:13:03 PM
Oh, should have seen the different color in the link.
So I downloaded it, and virustotalled it.
DOESN'T THIS CONCERN ANYONE?

AntiVir    APPL/Bitcoinminer.Gen    20140623
Baidu-International    Hacktool.Win32.BitCoinMiner.BBF    20140623
DrWeb    Tool.BtcMine.141    20140623
ESET-NOD32    a variant of Win32/BitCoinMiner.BF    20140623
K7AntiVirus    Trojan ( 00494bd01 )    20140623           MAINLY THESE TROJANS, not the bitcoinminer!
K7GW    Trojan ( 00494bd01 )    20140623
Sophos    Generic PUA GF    20140623
Symantec    WS.Reputation.1    20140623
TrendMicro-HouseCall    Suspicious_GEN.F47V0620    20140623

?????

http://s2.subirimagenes.com/fotos/previo/thump_8968140virussgminer.jpg (http://www.subirimagenes.com/fotos-virussgminer-8968140.html)

Explanation please?.

9 Red flags.

https://www.virustotal.com/en-gb/file/3d0b950d432165c33cf46512344c16d12a34fe9df696ec45eb917c6acacdc888/analysis/1403630203/


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: djm34 on June 24, 2014, 05:27:40 PM
no idea... sorry. (file removed, just in case...)
and you are down to compile it yourself, because I have other things to do than giving explanation over something I don't understand myself.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: cryptoangel on June 24, 2014, 05:31:11 PM
no idea... sorry. (file removed, just in case...)
and you are down to compile it yourself, because I have other things to do than giving explanation over something I don't understand myself.

Lazybears miner just hit 22 red flags :S.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: OPTiK on June 24, 2014, 05:36:06 PM
Any gains for r9 270? What are people hashing?

x11 ~ 2.7
x13 ~ 2.0

The sweet part being still using 13.12 drivers with 14.6 opencl dropped in to folder. So didn't have to use "modded" drivers for Win7x64 to get the 5 270x "recognized".

Was getting ~2.0 and ~1.7 respectively before.

Took about 5 mins...didn't change a thing in bat or conf file.

Yeah, I'm seeing the same with x11. I originally changed all my rigs to 14.6, but after reading this thread I've gone back to 13.12 and loaded the opencl files into the sgminer folder. This is nice since I can switch back to scrypt-n on the fly.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: djm34 on June 24, 2014, 05:36:14 PM
no idea... sorry. (file removed, just in case...)
and you are down to compile it yourself, because I have other things to do than giving explanation over something I don't understand myself.

Lazybears miner just hit 22 red flags :S.
Now I understand why the other devs, don't give binaries (unless they have a 5% fee included in there miner  ;D)


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: Mylo on June 24, 2014, 06:29:53 PM
Guys,

New beta is out amd-catalyst-14.6-rc2-windows-june23.exe

Any input on 270/280x/290 performance?


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: jimlite on June 24, 2014, 06:37:25 PM
no idea... sorry. (file removed, just in case...)
and you are down to compile it yourself, because I have other things to do than giving explanation over something I don't understand myself.

Lazybears miner just hit 22 red flags :S.
Now I understand why the other devs, don't give binaries (unless they have a 5% fee included in there miner  ;D)

I run windows rigs, and use binaries because no one ever tells how to compile one for windows.
Is it easy or a pain? What programs do you need to download to compile stuff on windows?
I am not a coder, but can build a mean rig and know my way around windows.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: Newwsr on June 24, 2014, 06:49:05 PM
I'm mining for with this sgminer 14.6 with this virus even someone already tested?


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: solo20 on June 24, 2014, 07:33:21 PM
question is this free


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: djm34 on June 24, 2014, 07:49:59 PM
question is this free

it is free, though donations are welcomed
(however, viewing what I got, 0.09drk and 0.01btc (I take the opportunity to thank the 2 persons who sent something  ;)) I understand why there are more and more closed source...  or with mining fee  ;D)

Regarding the compilation under windows, you have to install mingw (however everything step is explained in details in the doc/windows_build.txt


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: Bawb3 on June 24, 2014, 08:48:51 PM
I really don't think the red flags in virustotal are anything to worry about.
Remember you're scanning an executable (GIANT RED FLAG THERE), from an unknown source/publisher (Another red flag), for an unknown program (another red flag). Why WOULDN'T virustotal throw some flags? Plus zips containing batch files are also going to make them go nuts.

ALSO, "sgminer.exe" has probably been reported as a virus (in their databases) from being maliciously included in downloads (usually from torrents) to mine on people's computers without them knowing.

Just be careful, and watch for odd behavior ... like hidden mining quotas and such :)


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: Real_Unhooked on June 24, 2014, 08:49:56 PM
Someone please post a conf file for 290/290x.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: solo20 on June 24, 2014, 09:04:15 PM
290x tri oc
seems stable been at it for 3 hours now seems to be running hoter then befor  61-69 fans at 75% for both cards


gpu-engine is 1040 for both
intensity" : "16, "gpu-memclock" : "1420               ---> hash for  gpu 0 - 5016MH
intensity" : "17" "gpu-memclock" : "1440               --->  gpu 1 - 5250MH  
 anybody got better settings



Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: Spacewide on June 24, 2014, 09:09:09 PM
Is saw a guy saying 2.7mh on R9,270

Can anyone post a config for this card please? Not familiar with these cards.  :-*


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: Bojcha on June 24, 2014, 10:35:42 PM
Checked 5850 and no gain or even bit worse. :|


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: kaltar on June 24, 2014, 11:00:52 PM
Well here is my hash rate so i know it works for people that are doubtful

the top image is a asus 280x rig and the bottom picture , the first card is 290x and the rest are 270x

this is on X11

http://s29.postimg.org/swdtmnzrb/Hash.jpg (http://postimage.org/)
image hosting over 10mb (http://postimage.org/)

Here are my 2 config File

280x

],

"kernel-path" : "/usr/local/bin",
"kernel" : "x11mod",

"vector" : "1",
"intensity" : "18",
"worksize" : "256",
"lookup-gap" : "2",
"gpu-threads" : "4",
"shaders" : "2048",
"thread-concurrency" : "8192",
"gpu-engine" : "1160",
"gpu-memclock" : "1500",
"gpu-powertune" : "20",
"gpu-vddc" : "0.000",
"gpu-dyninterval" : "10",
"auto-fan" : true,
"auto-gpu" : true,
"gpu-fan" : "70-100",
"temp-cutoff" : "95",
"temp-overheat" : "90",
"temp-target" : "85",
"temp-hysteresis" : "3",
"api-listen" : true,
"api-mcast-port" : "4028",
"api-network" : true,
"api-port" : "4028",
"failover-switch-delay" : "30",
"log" : "5",
"no-pool-disable" : true,
"no-submit-stale" : true,
"tcp-keepalive" : "30",
"worktime" : true,
"shares" : "0",
"queue" : "3",
"expiry" : "60",
"scan-time" : "60",
"show-coindiff" : true,
"gpu-platform" : "0",
}

and for the 290x and 270x

],
"kernel" : "x11mod",
"api-allow" : "W:127.0.0.1",
"api-listen" : true,
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "1",
"hotplug" : "5",
"kernel-path" : "/usr/local/bin",
"log" : "5",
"queue" : "1",
"scan-time" : "30",
"scrypt" : true,
"shares" : "0",
"auto-fan" : true,
"gpu-threads" : "4,2,2,2,2,2",
"gpu-dyninterval" : "7",
"gpu-engine" : "1060,1200,1200,1200,1200,1200",
"gpu-fan" : "0-90,0-85,0-85,0-85,0-85,0-85",
"gpu-platform" : "0",
"gpu-memclock" : "1300,1500,1500,1500,1500,1500",
"gpu-memdiff" : "0,0,0,0,0,0",
"gpu-powertune" : "20,20,20,20,20,20",
"gpu-vddc" : "0.000,1.150,1.150,1.150,1.150,1.150",
"intensity" : "19,19,19,19,19,19",
"temp-target" : "85,75,75,75,75,75",
"temp-overheat" : "95,85,85,85,85,85",
"temp-cutoff" : "100,95,95,95,95,95",
"temp-hysteresis" : "3",
"vectors" : "1,1,1,1,1,1",
"worksize" : "128,128,128,128,128,128",
"lookup-gap" : "2,2,2,2,2,2",
"shaders" : "2560,1280,1280,1280,1280,1280",
"thread-concurrency" : "20400,5121,5121,5121,5121,5121",
"no-pool-disable" : true,
"failover-switch-delay" : "30",
}

GoodLuck

btw this is running on 13.12 and extracted 14.6 files needed and copied to the sgminer folder, deleted the old bin files, and let sgminer make new ones. you can find wich files to extrac on a earlier post on this thread.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: chou on June 25, 2014, 02:19:42 AM
Hai guys, is anybody already setup mining vertcoin with this ?


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: xgtele on June 25, 2014, 02:21:55 AM
Hai guys, is anybody already setup mining vertcoin with this ?


Vertcoin is a different algo


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: chou on June 25, 2014, 02:39:55 AM
Hai guys, is anybody already setup mining vertcoin with this ?


Vertcoin is a different algo

Bro, i had setup with another sgminer with nfactor = 11, and running smoothly ,is it possible with us ?


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: xgtele on June 25, 2014, 02:54:33 AM
Hai guys, is anybody already setup mining vertcoin with this ?


Vertcoin is a different algo

Bro, i had setup with another sgminer with nfactor = 11, and running smoothly ,is it possible with us ?

sgminer is working with srypt-n, but this thread is about X11/X13 mod kernels


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: adroitful on June 25, 2014, 06:04:54 AM
The link in OP is down.. Can someone PLEASE reup this?


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: tramphuochuy on June 25, 2014, 06:46:42 AM
You can install only on 1 pc  , after run ok with that pc , copy .bin file ( in sgminer folder ) from this pc to another pc ( Same VGA series ) , everything go smooth


.bin file : file built automatically  by sgminer when it start , example file name : x11modTahitiglg2tc8192w256l4.bin

 
https://dl.dropboxusercontent.com/u/46151949/Autocoin/Clearbeenfile.jpg


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: barryzand on June 25, 2014, 08:57:55 AM
Checked 5850 and no gain or even bit worse. :|

indeed.... Is there any way you can make a version wich supports 5xxx cards hash growth?

I did all the things that were said in here....


1st try:

de-installed 14.4....... installed 14.6.... deleted bin files in sgminer folder....generated new ones..  result:  lower hashrate then 14.4

2nd try:

installed 14.6.... deleted bin files in sgminer folder....copied generated ones of 14.4...  result:  lower hashrate then 14.4 (bit higher then using the bin from 14.6)

3rd try:

installed 14.6.... deleted bin files in sgminer folder....copied generated ones of 14.4... copying the openCL files from  the c:/amd/display/etcetc into my sgminer folder  result:  lower hashrate then 14.4 (bit higher then using the bin from 14.6)


4th try:

de-installed 14.6....... installed 14.4.... deleted bin files in sgminer folder....generated new ones.... copying the openCL files from the 14.6 driver, c:/amd/display/etcetc into my sgminer folder  result:  lower hashrate then 14.4 opencl files.

5th try

Clean windows 7 premium 64bit... Installed driver 13.12... Result : Higher hashrates then 14.4 and 14.6 (getting 1975mhs per 5870card)

6th try Copying the opencl files from 14.6 into sgminer folder while running 13.12.... result: Lower hash then 13.12 opencl...


As you can see I tried many different things... and a lot more versions of what I described above...lol

Driver 14.6 (even 14.4) Are not the best drivers for a 5xxx card... Ill stick too 13.12 for now... But I really hope you can make a version wich supports the hash growth for 5xxx/6xxx cards... Thank you!


Barry


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: windblow11 on June 25, 2014, 10:18:04 AM
anyone has the .bin file for 290(no x) and 270x from 14.6 driver


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: DedRes on June 25, 2014, 10:59:11 AM
Double two.
Hi
Does anybody know any pool operating on port 80, 8080 or 443?
I finally got the miner working with the  drk.mupool.com:80
But I'm getting ridiculous 150KH/s with 6760.

Any advice please?


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: iru786 on June 25, 2014, 11:58:08 AM
anyone has the .bin file for 290(no x) and 270x from 14.6 driver

Let me know if you still require the bins... Will upload it somewhere for you.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: iru786 on June 25, 2014, 12:08:26 PM
Here are the bin files for R9 290 with 14.6 Driver.

X13 @ 3.61 Mhs
X11 @ 4.95 Mhs.

http://speedy.sh/vDXZQ/R9290-146-Bin-iru786.rar


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: windblow11 on June 25, 2014, 01:39:53 PM
Here are the bin files for R9 290 with 14.6 Driver.

X13 @ 3.61 Mhs
X11 @ 4.95 Mhs.

http://speedy.sh/vDXZQ/R9290-146-Bin-iru786.rar

thanx. still waiting for 270x


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: thefrog on June 25, 2014, 02:33:34 PM
Anyone tested with linux? what catalyst?
latest linux beta, just follow the installation script.
and latest SDK headers.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: solo20 on June 25, 2014, 02:45:27 PM
question how do I keep it from crashing I thought I fix the problem but I didn't?
I set my setting lower but it still crashing going to back to 14.4 and now I see lower hash rate this blows
using  windows 7 64



Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: panda86 on June 25, 2014, 04:24:19 PM
Hello guys,

here is my config for 270x

{
"pools" : [
   {
      "url" : "stratum+tcp://useast.blackcoinpool.com:3333",
      "user" : "your_username",
      "pass" : "your_pass"
   }
]
,
"intensity" : "19,19,19",
"vectors" : "1,1,1",
"worksize" : "512,512,512",
"kernel" : "x11mod,x11mod,x11mod",
"lookup-gap" : "2,2,2",
"thread-concurrency" : "15232,15232,15232",
"shaders" : "0,0,0",
"gpu-engine" : "1120-1120,1120-1120,1120-1120",
"gpu-fan" : "40-100,40-100,40-100",
"gpu-memclock" : "1500,1500,1500",
"gpu-memdiff" : "0,0,0",
"gpu-powertune" : "20,20,20",
"gpu-vddc" : "1.206,1.206,1.206",
"temp-cutoff" : "95,95,95",
"temp-overheat" : "85,85,85",
"temp-target" : "70,70,70",
"api-mcast-port" : "4028",
"api-port" : "4028",
"auto-fan" : true,
"expiry" : "120",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"gpu-threads" : "1",
"hotplug" : "5",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "30",
"temp-hysteresis" : "3",
"shares" : "0"
}

Its make 2.600MH per card. I'm using 14.6 beta driver and this sgminer. My problem is that sometime (after 8-10hours) it stops working with message
Waiting for work to be available from pools.
Setting GPUs to idle performance.

After restart it works again. Do you know how to fix this?

My bin file is in attachment. My cards are Sapphire 270 Dual-x 2GB.
https://dl.dropboxusercontent.com/u/18149881/x11modPitcairnglg2tc15232w256l4.bin


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: iru786 on June 25, 2014, 04:34:58 PM
Hello guys,

here is my config for 270x

{
"pools" : [
   {
      "url" : "stratum+tcp://useast.blackcoinpool.com:3333",
      "user" : "your_username",
      "pass" : "your_pass"
   }
]
,
"intensity" : "19,19,19",
"vectors" : "1,1,1",
"worksize" : "512,512,512",
"kernel" : "x11mod,x11mod,x11mod",
"lookup-gap" : "2,2,2",
"thread-concurrency" : "15232,15232,15232",
"shaders" : "0,0,0",
"gpu-engine" : "1120-1120,1120-1120,1120-1120",
"gpu-fan" : "40-100,40-100,40-100",
"gpu-memclock" : "1500,1500,1500",
"gpu-memdiff" : "0,0,0",
"gpu-powertune" : "20,20,20",
"gpu-vddc" : "1.206,1.206,1.206",
"temp-cutoff" : "95,95,95",
"temp-overheat" : "85,85,85",
"temp-target" : "70,70,70",
"api-mcast-port" : "4028",
"api-port" : "4028",
"auto-fan" : true,
"expiry" : "120",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"gpu-threads" : "1",
"hotplug" : "5",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "30",
"temp-hysteresis" : "3",
"shares" : "0"
}

Its make 2.600MH per card. I'm using 14.6 beta driver and this sgminer. My problem is that sometime (after 8-10hours) it stops working with message
Waiting for work to be available from pools.
Setting GPUs to idle performance.

After restart it works again. Do you know how to fix this?

My bin file is in attachment. My cards are Sapphire 270 Dual-x 2GB.
https://dl.dropboxusercontent.com/u/18149881/x11modPitcairnglg2tc15232w256l4.bin

Tyre lowering the work size to 64 or 128


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: maps0075 on June 25, 2014, 06:00:43 PM

This is the download link for the fixed miner: https://mega.co.nz/#!ZsJTALQI!qDh9jCWULjabTDPYq0K4fZamdZrPwot7m7AAfTEOJPQ (https://mega.co.nz/#!ZsJTALQI!qDh9jCWULjabTDPYq0K4fZamdZrPwot7m7AAfTEOJPQ)


Download link is dead now.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: Bojcha on June 25, 2014, 06:51:58 PM
Checked 5850 and no gain or even bit worse. :|
indeed.... Is there any way you can make a version wich supports 5xxx cards hash growth?
I really hope you can make a version wich supports the hash growth for 5xxx/6xxx cards... Thank you!

Barry
Thing is that .cl is not optimized at all for 5/6xxx cards. only for R9 series.
I guess he would need one card from each 5 and 6 series to try to boost.

Best i can get with mine 5850 is  ~1.77MH/s with 64bit miner.

And btw..
For R9 cards it's best to compile kernel with 14.6 drivers and use 13.12 drivers in system with 64bit miner.

mine 2x280x and 2x5850 - http://i.imgur.com/JUMmqhC.png


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: nfox on June 25, 2014, 06:55:47 PM
I need config for r9 290x and 7950  ::)


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: kozmos on June 25, 2014, 07:16:25 PM

This is the download link for the fixed miner: https://mega.co.nz/#!ZsJTALQI!qDh9jCWULjabTDPYq0K4fZamdZrPwot7m7AAfTEOJPQ (https://mega.co.nz/#!ZsJTALQI!qDh9jCWULjabTDPYq0K4fZamdZrPwot7m7AAfTEOJPQ)


Download link is dead now.
New Link: https://mega.co.nz/#!8gZ3BbBa!tJLKAr08Lirinh39h55naOY20gLbyPcQpBgWWcB3UDA (https://mega.co.nz/#!8gZ3BbBa!tJLKAr08Lirinh39h55naOY20gLbyPcQpBgWWcB3UDA)


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: hashbrown9000 on June 25, 2014, 10:16:33 PM
The miner has been running on my test rig now for 2.5 hours.  It has one Gigabyte WF 270 non X and three Sapphire 270x cards.  The Gigabyte is undervolted to 1.075 volts and the 3 Sapphires are undervolted to 1.100 volts.  Engine clocks down just a bit to find stability.

Running BAMT 1.6.0 upgraded to the 14.6 beta drivers, using this procedure:

http://www.reddit.com/r/BAMT/comments/28xu3i/add_amd_146_drivers_and_djm34s_optimized_sgminer/ (http://www.reddit.com/r/BAMT/comments/28xu3i/add_amd_146_drivers_and_djm34s_optimized_sgminer/)

Config:

{
"pools" : [
   {
      "url" : "x",
      "user" : "x",
      "pass" : "x"
   }
],
"xintensity" : "512",
"kernel" : "x11mod",
"lookup-gap" : "2",
"shaders" : "1280",
"worksize" : "128",
"gpu-threads" : "2",
"gpu-engine" : "1050",
"gpu-fan" : "20-85",
"gpu-memclock" : "1250",
"gpu-powertune" : "20",

"temp-cutoff" : "92",
"temp-overheat" : "89",
"temp-target" : "75",

"api-listen": true,
"api-port": "4028",
"api-allow": "W:127.0.0.1",
"api-mcast-port" : "4028",
"auto-fan" : true,
"expiry" : "1",
"failover-only" : true,
"log" : "5",
"queue" : "0",
"scan-time" : "1",
"temp-hysteresis" : "3",

"failover-switch-delay" : "30",
"no-pool-disable" : true,
"kernel-path" : "/usr/local/bin"
}


Each one hits 2.55 MH/s


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: scrubadub on June 26, 2014, 02:01:59 AM
Has anyone checked for any hidden hash redirect?

netstat -tulpan
and
tcpdump -n -i eth0 port not 22

both look ok for me.

Of course they could've patched both of those programs but that's a lot of extra work. Feel free to throw a hub inline and sniff from another computer if you're worried about that.

And you have no reason to trust me so check those yourself.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: Vampiro4L on June 26, 2014, 02:40:25 AM
Tips sent to OP and the_g00se for the bamt install instructions.
If you found this thread helpful tip these guys they were nice enough to share this stuff with the community.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: fra55 on June 26, 2014, 07:16:02 AM
Anyone with the same problem?

Miner keeps to put GPUs in idle performance claiming that no work is available from pools...after a few seconds it will state "Work available, resuming" and so on until I shut the miner off.
Strange to say, it's actually mining as the pool shows the correct hashrate...


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: bullus on June 26, 2014, 08:09:16 AM
Which driver should I use for 5gpu and windows7 64bit to get the boost with 14.6 files/drivers? (7950's)
With 14.4 drivers I can't install the drivers for the fith one, get a explanation icon.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: portron on June 26, 2014, 08:35:48 AM
I've posted a guide on how to update PiMP to use this, thanks so much for the great work guys.

http://www.reddit.com/r/getpimp/comments/294uie/add_amd_146_drivers_and_djm34s_optimized_sgminer/


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: Mylo on June 26, 2014, 10:52:20 AM
New 14.6 drivers cause ~ +10*C (290) temp increase. What's the point? X11 coins were made to work fine under 80*C at 30*C+ ambient in Summer.
Now we draw more electricity, overwhelm cards just like before with Scrypt.

The most optimal solution is to have stable drivers + extracted AMD dll's, minus 0.3-0.4Mh (280x-290)


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: bengx on June 26, 2014, 12:22:00 PM
Hai guys, is anybody already setup mining vertcoin with this ?


You can try mining on x11.greenpool.com. Mines x11 coins and autoconverts to Vertcoins.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: Burninj on June 26, 2014, 12:27:09 PM
Djm34 would you have the skill to make a bitblock gpu miner?


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: masonbtc on June 26, 2014, 07:23:26 PM
Anyone else getting this error in sgminer?

Getaddrinfo() in setup_Stratum_socket() returned 10109: The specified class was not found


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: fran2k on June 27, 2014, 01:07:59 AM
New 14.6 drivers cause ~ +10*C (290) temp increase. What's the point? X11 coins were made to work fine under 80*C at 30*C+ ambient in Summer.
Now we draw more electricity, overwhelm cards just like before with Scrypt.

The most optimal solution is to have stable drivers + extracted AMD dll's, minus 0.3-0.4Mh (280x-290)

Jajaja man. Thanks for the laught.

14.6 drivers increased the hashrate around 30-50%, obviously also increased the power consumption.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: djm34 on June 27, 2014, 01:13:28 AM
Anyone else getting this error in sgminer?

Getaddrinfo() in setup_Stratum_socket() returned 10109: The specified class was not found

Can you give a little more detail in which occasion you had this error ?


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: masonbtc on June 27, 2014, 01:20:47 AM
http://i.imgur.com/cXRd2BS.jpg

It just pops up every 5 - 10 seconds in sgminer.  I can't tell if it is affecting anything at all.  Also when loading up sgminer it says something about failed to resolve pool.  As far as I can tell it is connecting though?


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: masonbtc on June 27, 2014, 01:29:45 AM
oh i might have figured it out...  .conf file wasn't updated...

edit:
ya that fixed it..  I normally just pass pool info and everything to sgminer via a batch file, but I updated the .conf file with all of that info and that fixed the error.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: daeminium on June 27, 2014, 02:10:19 AM
Anyone with the same problem?

Miner keeps to put GPUs in idle performance claiming that no work is available from pools...after a few seconds it will state "Work available, resuming" and so on until I shut the miner off.
Strange to say, it's actually mining as the pool shows the correct hashrate...


x2 same here :-(


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: djm34 on June 27, 2014, 02:13:37 AM
Anyone with the same problem?

Miner keeps to put GPUs in idle performance claiming that no work is available from pools...after a few seconds it will state "Work available, resuming" and so on until I shut the miner off.
Strange to say, it's actually mining as the pool shows the correct hashrate...


x2 same here :-(
Use the latest binary I added to the thread, there shouldn't be any problem


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: coinjohn on June 27, 2014, 02:28:36 AM
it would be great if someone added a pre-compiled version for windows containing the opencl files and bin files for all the latest amd cards

p.s. i tried in so many ways to run my r9 290 (non x) on windows 8.1 following what i read here but for starters i'm a noob and the best result i got so far was seeing the hashrate go to 4.2mh/s but i wasn't getting any work from the pools and i was seeing HW errors, so i decided to roll back to my older drivers and wait for a revised or easier to run version for windows.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: aznboy84 on June 27, 2014, 04:21:47 AM
it would be great if someone added a pre-compiled version for windows containing the opencl files and bin files for all the latest amd cards

p.s. i tried in so many ways to run my r9 290 (non x) on windows 8.1 following what i read here but for starters i'm a noob and the best result i got so far was seeing the hashrate go to 4.2mh/s but i wasn't getting any work from the pools and i was seeing HW errors, so i decided to roll back to my older drivers and wait for a revised or easier to run version for windows.

try this one ....
https://bitcointalk.org/index.php?topic=658975.0


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: fra55 on June 27, 2014, 06:48:37 AM
Anyone with the same problem?

Miner keeps to put GPUs in idle performance claiming that no work is available from pools...after a few seconds it will state "Work available, resuming" and so on until I shut the miner off.
Strange to say, it's actually mining as the pool shows the correct hashrate...


x2 same here :-(
Use the latest binary I added to the thread, there shouldn't be any problem

Where can I find them? Home page?


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: djm34 on June 27, 2014, 09:51:32 AM
it would be great if someone added a pre-compiled version for windows containing the opencl files and bin files for all the latest amd cards

p.s. i tried in so many ways to run my r9 290 (non x) on windows 8.1 following what i read here but for starters i'm a noob and the best result i got so far was seeing the hashrate go to 4.2mh/s but i wasn't getting any work from the pools and i was seeing HW errors, so i decided to roll back to my older drivers and wait for a revised or easier to run version for windows.
This version was designed with 14.6 driver in mind. If you are using win 8.1 then you have no excuse to stay with the old amd drivers
the working windows binaries are on the OP.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: Bawb3 on June 27, 2014, 02:01:53 PM
New 14.6 drivers cause ~ +10*C (290) temp increase. What's the point? X11 coins were made to work fine under 80*C at 30*C+ ambient in Summer.
Now we draw more electricity, overwhelm cards just like before with Scrypt.

The most optimal solution is to have stable drivers + extracted AMD dll's, minus 0.3-0.4Mh (280x-290)

With decent airflow, my 290 rigs didn't go up that much, they're still running ~72C which isn't terrible, but the fan speeds have gone up quite a bit. Still nowhere near how scrypt was cooking them. Get some box fans maybe? haha


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: maps0075 on June 27, 2014, 02:33:02 PM
I have very strange problem.

When I start mining with all 4 cards PC just hangs and I have to power it off. (tried with drivers 14.4 WHQL, 14.6beta, 13.12 all hangs)

When Mined with 3 cards : 1) 0,1,2 and
                                     2) 1,2,3 it works ok.

Even When I try with BAMT by following guide
http://www.reddit.com/r/BAMT/comments/28xu3i/add_amd_146_drivers_and_djm34s_optimized_sgminer/
It hangs with mining with all 4 cards.

Any one please help me out?

PC:
AMD 145 sempron 32 bit
windows 7
4x 280x powercolor OC


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: MIRQ3 on June 27, 2014, 05:34:57 PM
Does anybody noticed very big hashrate drop (for N-factor algo) on 14.6 drivers? ???
My R270x produces only 158kH, previously on 14.4 drivers it was 230 kH !
Sometime I mine X11, sometime adaptative n-Factor.
N-factor looks totally crippled!
Any ideas what to do?


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: Bojcha on June 27, 2014, 09:10:29 PM
Does anybody noticed very big hashrate drop (for N-factor algo) on 14.6 drivers? ???
My R270x produces only 158kH, previously on 14.4 drivers it was 230 kH !
Sometime I mine X11, sometime adaptative n-Factor.
N-factor looks totally crippled!
Any ideas what to do?
sure, use old bin.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: thectspot on June 28, 2014, 04:03:36 AM
question is this free

it is free, though donations are welcomed
(however, viewing what I got, 0.09drk and 0.01btc (I take the opportunity to thank the 2 persons who sent something  ;)) I understand why there are more and more closed source...  or with mining fee  ;D)

Regarding the compilation under windows, you have to install mingw (however everything step is explained in details in the doc/windows_build.txt


Once i get it working on BAMT with my 290 Tri-x's I'll definitely send some brother!


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: Bu777 on June 28, 2014, 04:39:35 PM
Help!!!
Anyone have a 3 modified INF for the 14.6 RC2 yet for 5+ GPUs  ???


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: aikklond on June 28, 2014, 04:48:40 PM
I have very strange problem.

When I start mining with all 4 cards PC just hangs and I have to power it off. (tried with drivers 14.4 WHQL, 14.6beta, 13.12 all hangs)

When Mined with 3 cards : 1) 0,1,2 and
                                     2) 1,2,3 it works ok.

Even When I try with BAMT by following guide
http://www.reddit.com/r/BAMT/comments/28xu3i/add_amd_146_drivers_and_djm34s_optimized_sgminer/
It hangs with mining with all 4 cards.

Any one please help me out?

PC:
AMD 145 sempron 32 bit
windows 7
4x 280x powercolor OC


Power supply may not be  enough.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: ballzdeep on June 28, 2014, 07:52:37 PM
Anyone with the same problem?

Miner keeps to put GPUs in idle performance claiming that no work is available from pools...after a few seconds it will state "Work available, resuming" and so on until I shut the miner off.
Strange to say, it's actually mining as the pool shows the correct hashrate...


x2 same here :-(
Use the latest binary I added to the thread, there shouldn't be any problem

I also have this problem...


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: nicahokie on June 29, 2014, 03:23:04 AM
Great work on improving sph-sgminer_x11mod djm34.
It would be great if you would contribute these enhancements/fixes to the unified multi-algorythm sgminer Version 5 branch(es)
https://github.com/sgminer-dev/sgminer/
Any plans to do so?


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: Ignition75 on June 29, 2014, 11:22:32 PM
Do 14.6 drivers capable to run 6 GPU's in win8.1? I've already tried to install but only 5 GPU's are running okay, can't get rid of code 43 error for the 6th gpu. Any clue?

Did you get this sorted?  If not PM met and I will give you a dropbox link to the modded inf files...


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: SnjafSnjaf on June 29, 2014, 11:25:59 PM

This is the download link for the fixed miner: https://mega.co.nz/#!ZsJTALQI!qDh9jCWULjabTDPYq0K4fZamdZrPwot7m7AAfTEOJPQ (https://mega.co.nz/#!ZsJTALQI!qDh9jCWULjabTDPYq0K4fZamdZrPwot7m7AAfTEOJPQ)


Download link is dead now.
New Link: https://mega.co.nz/#!8gZ3BbBa!tJLKAr08Lirinh39h55naOY20gLbyPcQpBgWWcB3UDA (https://mega.co.nz/#!8gZ3BbBa!tJLKAr08Lirinh39h55naOY20gLbyPcQpBgWWcB3UDA)

When i start that miner it just closes, like it cant read x13... I tried to mine x13 on r9 280x with 14.6 lates beta drivers. Can you help me?


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: Ignition75 on June 29, 2014, 11:26:59 PM
Help!!!
Anyone have a 3 modified INF for the 14.6 RC2 yet for 5+ GPUs  ???

Here you go:  https://www.dropbox.com/s/uyxge2fznoj6e7a/amd14.6_mod_inf_6x_gpu.zip


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: Marvell1 on June 30, 2014, 04:18:21 AM
Help!!!
Anyone have a 3 modified INF for the 14.6 RC2 yet for 5+ GPUs  ???

Here you go:  https://www.dropbox.com/s/uyxge2fznoj6e7a/amd14.6_mod_inf_6x_gpu.zip

I have these inf files but they do not match the inf files from the 14.6 RC2 download

in the  folder AMD\AMD-Catalyst-14.6-RC2-Windows-June23\Packages\Drivers\Display\WB6A_INF

the inf files are :
C7173243.inf
CU173243.inf

but in the dropbox version I see :

C7172180.inf
CU172180.inf

which does not match the names of the MSI files which are C7173243 as well
help please ?


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: zmhaha on June 30, 2014, 03:14:32 PM
This .inf only work for 14.6 RC1. AMD has taken it off their website but you can get it from Guru3d


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: uzer23 on June 30, 2014, 04:01:53 PM
the sgminer windows download from first page has not got any x11mod.cl file in /kernel directory and so x11 does not work!?


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: Marvell1 on June 30, 2014, 08:00:53 PM
This .inf only work for 14.6 RC1. AMD has taken it off their website but you can get it from Guru3d

Ok thanks for the update on that , I am running RC2 on one box and only 4GPU are active but the hash rates are isane :

geting 5.2 MHZ on a r290 clock speeds at 970 mem at 1350 intensity 21.

will my speeds drop with RC1 ? I wish there was an inf file for RC2 but i guess i will use the RC1 modded drivers for now since I need all 6 gpu's running


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: OPTiK on July 01, 2014, 03:15:45 AM
Does anyone know what xintensity = I17 for a 280x? I have a rig that is mixed 270x/280x and can't figure out the conversion for x11 (can't use both intensity/xintensity at the same time). I know that 270x uses xintensity 512 for x11 (weird to me since it uses 4 for scrypt). I'm not sure what the new xintensity formula is for x11?


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: Mylo on July 01, 2014, 11:09:29 AM
Guys, all of you don't tweak Engine/Memory clock much? Because in 14.6 Beta you just can't.
Same goes for fan speeds, sgminer doesn't control anything, so even I said holding them at 75% it went 100% on X*290 machine one time.

Pretty much what kozmos (https://bitcointalk.org/index.php?action=profile;u=245626) pointed out here: https://bitcointalk.org/index.php?topic=658975.0

Also the temps spark +10*C (up to 80*C; 14.6 beta vs 13.12/14.4) which I feel a bit of a struggle to manage under 40*C outside summer temperature.
As far as I remember I had several times when temps were going just around 70*C under same conditions with same external fans.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: mfqrs3 on July 01, 2014, 08:06:45 PM
@Mylo
Yes, you are right.
I can't change Mem and Gpu clocks to lower than bios default.
I will leave 14.6 bin files and try with 14.4 drivers... everybit of energy saving is important for my power bill.

Update: Yes, with 14.4 I can change clocks up/down as I want.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: OPTiK on July 01, 2014, 08:49:08 PM
@Mylo
Yes, you are right.
I can't change Mem and Gpu clocks to lower than bios default.
I will leave 14.6 bin files and try with 14.4 drivers... everybit of energy saving is important for my power bill.

Update: Yes, with 14.4 I can change clocks up/down as I want.

Copy the .opencl files into the sgminer folder and you'll be able to control everything.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: mfqrs3 on July 01, 2014, 09:16:20 PM
I control gpu's with Trixx and Afterburner. With 14.4 I can lower clocks with 14.6 I can't, same sgminer and all the rest.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: wevus on July 02, 2014, 08:27:28 AM
Need help, I am having a hellluva time time trying to get my saphire 6970 to run x13. It runs x11 fine @ 2.4, but when I try to run X13mod with it i just get HW errors. Could someone please post a working config for it?
Thank you for your time


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: GGin on July 03, 2014, 10:46:07 AM
Need help, I am having a hellluva time time trying to get my saphire 6970 to run x13. It runs x11 fine @ 2.4, but when I try to run X13mod with it i just get HW errors. Could someone please post a working config for it?
Thank you for your time

if you use driver 14.6 - try checking your x11/x13mod files by this guide, maybe it will help you:
https://bitcointalk.org/index.php?topic=658438.msg7555998#msg7555998 (https://bitcointalk.org/index.php?topic=658438.msg7555998#msg7555998)

btw somehow my 5850 work fine without this changes and 290 not.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: Stenull on July 04, 2014, 08:26:02 AM
 Any one could share hashrate on 14.4 drivers and 280x cards?

Is it confirmed that with 14.6 drivers one can not change mem clock and so on?


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: thefrog on July 04, 2014, 11:38:41 AM
Any one could share hashrate on 14.4 drivers and 280x cards?

Is it confirmed that with 14.6 drivers one can not change mem clock and so on?

I have 4.2 MHs on X11 with 14.6, and 3.1 on X13.
Linux, 2 gb ram.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: lobo13hf on July 04, 2014, 12:24:49 PM
@Mylo
Yes, you are right.
I can't change Mem and Gpu clocks to lower than bios default.
I will leave 14.6 bin files and try with 14.4 drivers... everybit of energy saving is important for my power bill.

Update: Yes, with 14.4 I can change clocks up/down as I want.

Copy the .opencl files into the sgminer folder and you'll be able to control everything.

where do you get the .opencl files from?????


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: Stenull on July 04, 2014, 12:37:31 PM
Any one could share hashrate on 14.4 drivers and 280x cards?

Is it confirmed that with 14.6 drivers one can not change mem clock and so on?

I have 4.2 MHs on X11 with 14.6, and 3.1 on X13.
Linux, 2 gb ram.

And you can change memclock and so on?
Was that only a windows problem under 14.6?


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: thefrog on July 04, 2014, 01:13:58 PM
Any one could share hashrate on 14.4 drivers and 280x cards?

Is it confirmed that with 14.6 drivers one can not change mem clock and so on?

I have 4.2 MHs on X11 with 14.6, and 3.1 on X13.
Linux, 2 gb ram.

And you can change memclock and so on?
Was that only a windows problem under 14.6?


yes, no problem at all.

I remember reading about some files you need to copy across for windows installation, was somewhere here in the thread.
Can't tell exactly, as no windows on my side, sorry.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: charmees on July 04, 2014, 01:38:49 PM
is there difference on windows and smos? me and my friend have 14.6 drivers on machine and using r9 270.

he gets 2.8mh , but I get only 2mh

he told me his settings, but I tried to replicate it in my smos configuration, but got even less, now getting 1.9mh.

his setting and getting 2.8mh :

Code:
setx GPU_MAX_ALLOC_PERCENT 200

setx GPU_USE_SYNC_OBJECTS 1

COLOR 0A

-I 19 -w 256 -g 2 --thread-concurrency 8192 --gpu-memclock 1500 --gpu-engine 1150

my settings in smos, getting 1.9mh:

Code:
"intensity" : "19",
"worksize" : "256",
"thread-concurrency" : "8192",
"gpu-thread" : "2",
"gpu-engine" : "1150",
"gpu-memclock" : "1500"

am I doing it correctly, how can I set that gpu max alloc etc? suggestions?


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: windblow11 on July 04, 2014, 03:00:27 PM
This .inf only work for 14.6 RC1. AMD has taken it off their website but you can get it from Guru3d

Ok thanks for the update on that , I am running RC2 on one box and only 4GPU are active but the hash rates are isane :

geting 5.2 MHZ on a r290 clock speeds at 970 mem at 1350 intensity 21.

will my speeds drop with RC1 ? I wish there was an inf file for RC2 but i guess i will use the RC1 modded drivers for now since I need all 6 gpu's running
still no .inf files for 14.6 RC2 fot 5+ gpus ???


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: fra55 on July 04, 2014, 11:13:57 PM
Using the latest version in home page, my hashrate dropped from 4.1 mh/s to 3.4 mh/s, same settings (tried with - I 18 and - I 19) but nothing changed... ???


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: untalented on July 05, 2014, 09:14:16 AM
I control gpu's with Trixx and Afterburner. With 14.4 I can lower clocks with 14.6 I can't, same sgminer and all the rest.
With 14.6 drivers you can't change settings on cards 280x/290X, but you can on HD7950/HD7970 and 290 cards.

BTW
Is Nist5 kernel missing in this miner?
Is missing in windows binares but i get from source and working well


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: Chofoe on July 05, 2014, 03:11:57 PM
Could someone provide x11 and x13 mode .cl files for windows? I have been trying to find those but none of them seemed to work with 14.6. I've managed to find out working x11mod, but still would need x13mod cl file. Thanks a lot!

Edit:
1st problem was in hamli.cl (windows link has old one)

Now I get this error when running sgminer with x13mod:

OCL....., line 289: error: vector
    "uchar8" has no field "m0", or illegal use of numeric/letter index, or num selected components != power of two PERM_BIG_P(g);

Advice needed.

Edit2:
Okay so you have to get all the .cl files from https://github.com/djm34/sph-sgminer_x11mod (https://github.com/djm34/sph-sgminer_x11mod) and modify x11 and x13 as mentioned in here https://bitcointalk.org/index.php?topic=658438.40 (https://bitcointalk.org/index.php?topic=658438.40)


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: mrbrdo on July 06, 2014, 06:56:36 AM
I tried on a clean install of 32-bit ubuntu with latest (may23) 14.6 beta drivers, but I do not get any speed increase at all. I tried on x11mod both with djm34's version from github and latest sgminer v5.0.
A friend sent me pre-built .bin files from Windows and that works, I get 3.8 MH/s instead of 2.9 MH/s on my ASUS R9 280X. But if I build them myself on my Ubuntu, I get no speed increase (just normal 2.9 MH/s).
Any idea what I'm doing wrong? Does it have to be 64-bit?


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: go6ooo1212 on July 06, 2014, 11:14:16 AM
Sorry if its written here , but could you help me how to run 5 or 6 R9 280X under win7 with 14.6 AMD drivers ?


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: Reese212 on July 06, 2014, 12:52:18 PM
any words on r9 280x with 14.6 Drivers and x13 mining? i haven't installed the amd app sdk.

for me it went from 2.7 MH/s per GPU (13.12 Drivers) to 2.9 MH/s per GPU (14.6 Drivers)


what's your results?


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: Reese212 on July 06, 2014, 12:54:02 PM
Sorry if its written here , but could you help me how to run 5 or 6 R9 280X under win7 with 14.6 AMD drivers ?

for 5 Cards with win7 you Need the modded *.inf files. otherwise your OS only detects 4 GPUs. and for the modded *.inf files to work you Need to enable the "Windows testmode" because These modded *.inf files aren't signed. Only signed Drivers work without enabling testmode. That's at least what i experienced...


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: Reese212 on July 06, 2014, 01:04:35 PM
This .inf only work for 14.6 RC1. AMD has taken it off their website but you can get it from Guru3d

Ok thanks for the update on that , I am running RC2 on one box and only 4GPU are active but the hash rates are isane :

geting 5.2 MHZ on a r290 clock speeds at 970 mem at 1350 intensity 21.

will my speeds drop with RC1 ? I wish there was an inf file for RC2 but i guess i will use the RC1 modded drivers for now since I need all 6 gpu's running
still no .inf files for 14.6 RC2 fot 5+ gpus ???

the old *.inf files which i used with 13.12 Drivers work very well for me with the new amd-catalyst-14.6-rc2-windows-june23 Drivers...


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: go6ooo1212 on July 06, 2014, 01:45:19 PM
Could you tell me which exact inf files should I replace :)
EDIT:
I succeed with 13.12 drvs , thanks for the support


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: Reese212 on July 06, 2014, 02:25:44 PM
Could you tell me which exact inf files should I replace :)

if you were able to had your 5+ GPUs running in one rig with win7 64bit then you must have used the modded inf files afaik.
i believe that this was the thread i got the modded *.inf files from: https://litecointalk.org/index.php?topic=11761.0

it says that it ONLY works wit 13.12, but i swear i just installed the 14.6rc2 Drivers, used the modded inf, and all GPUs get detected.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: go6ooo1212 on July 06, 2014, 02:48:28 PM
Could you tell me which exact inf files should I replace :)

if you were able to had your 5+ GPUs running in one rig with win7 64bit then you must have used the modded inf files afaik.
i believe that this was the thread i got the modded *.inf files from: https://litecointalk.org/index.php?topic=11761.0

it says that it ONLY works wit 13.12, but i swear i just installed the 14.6rc2 Drivers, used the modded inf, and all GPUs get detected.

Indeed , I Installed 14.6 RC2 , and one of the cards was with an error on the device manager. After that downloaded the 13.12 drvs from techpowerup , and just ipdated the damaged card with 13.12 ver of the driver and now its fixed , 5x280X GPUs on 4.277 MH /s on X11


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: lixxy on July 06, 2014, 06:52:04 PM
Could you tell me which exact inf files should I replace :)

if you were able to had your 5+ GPUs running in one rig with win7 64bit then you must have used the modded inf files afaik.
i believe that this was the thread i got the modded *.inf files from: https://litecointalk.org/index.php?topic=11761.0

it says that it ONLY works wit 13.12, but i swear i just installed the 14.6rc2 Drivers, used the modded inf, and all GPUs get detected.

Indeed , I Installed 14.6 RC2 , and one of the cards was with an error on the device manager. After that downloaded the 13.12 drvs from techpowerup , and just ipdated the damaged card with 13.12 ver of the driver and now its fixed , 5x280X GPUs on 4.277 MH /s on X11

wait... so which version of the miner are you using and what modifications in files did you have to do to it to be able to run x11? I finally got my rig to read 6 cards again after fiddling with it all day long trying to upgrade to the new djm34 miner... but it ended in not detecting all my cards.

wasted all day. now I finally detect all cards but hashrate is the same as before


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: go6ooo1212 on July 06, 2014, 08:17:07 PM
You should Install 14.6 , I read a thread about 14.4 , anyway , then go to https://bitcointalk.org/index.php?topic=623409.0
here you'll find moded sgminer with 2 moded kernels for x11 and x13.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: huadaonan on July 09, 2014, 01:15:18 PM
 why my temp and fan show  nothing. i have update the driver in 14.6rc2.my os is bamt1.3 .anyone who can help me,thanks


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: huadaonan on July 09, 2014, 01:39:07 PM
does your mining rig show the temp and fan speed?
The miner has been running on my test rig now for 2.5 hours.  It has one Gigabyte WF 270 non X and three Sapphire 270x cards.  The Gigabyte is undervolted to 1.075 volts and the 3 Sapphires are undervolted to 1.100 volts.  Engine clocks down just a bit to find stability.

Running BAMT 1.6.0 upgraded to the 14.6 beta drivers, using this procedure:

http://www.reddit.com/r/BAMT/comments/28xu3i/add_amd_146_drivers_and_djm34s_optimized_sgminer/ (http://www.reddit.com/r/BAMT/comments/28xu3i/add_amd_146_drivers_and_djm34s_optimized_sgminer/)

Config:

{
"pools" : [
   {
      "url" : "x",
      "user" : "x",
      "pass" : "x"
   }
],
"xintensity" : "512",
"kernel" : "x11mod",
"lookup-gap" : "2",
"shaders" : "1280",
"worksize" : "128",
"gpu-threads" : "2",
"gpu-engine" : "1050",
"gpu-fan" : "20-85",
"gpu-memclock" : "1250",
"gpu-powertune" : "20",

"temp-cutoff" : "92",
"temp-overheat" : "89",
"temp-target" : "75",

"api-listen": true,
"api-port": "4028",
"api-allow": "W:127.0.0.1",
"api-mcast-port" : "4028",
"auto-fan" : true,
"expiry" : "1",
"failover-only" : true,
"log" : "5",
"queue" : "0",
"scan-time" : "1",
"temp-hysteresis" : "3",

"failover-switch-delay" : "30",
"no-pool-disable" : true,
"kernel-path" : "/usr/local/bin"
}


Each one hits 2.55 MH/s



Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: hashbrown9000 on July 10, 2014, 03:02:57 AM
yes temps and fan speeds are showing


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: ShXnot on July 10, 2014, 08:15:58 PM
do i still have to use 14.4 for hd 7950?
anyone here has a .bin file from 14.6 please?


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: unlock.mk on July 10, 2014, 08:25:37 PM
Hi,

I have released a version of sgminer which allows to mine X11 and X13 coins using 14.6 amd drivers.

Can you make sgminer or kernel that works with HD5XXX Amd cards at greater speed ?
Also it needs to mine X15

Tested your miner on my cards HD5xxx and frivers 14.6, and there is no improvement, moreover they are slower then on 13.12


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: hashbrown9000 on July 11, 2014, 02:41:06 AM
sorry, no 7950s in my farm


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: Bojcha on July 11, 2014, 03:16:39 AM
Yea shame that 5xxxx/6xxx working so slow compared to newer series with x11.13.
However nist5 working just fine. Managed 6.5MH/s with 5850.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: Sinohe88 on July 11, 2014, 09:44:50 AM
Hello djm34,
i know it's so much to ask, but it would be great if you could tweak your miner to mine TWE algorithm
it's one of the rare good coins out there which is abandoned by the miners and i dont know why exactly
it has a strong network and some miners are still mining this coin
if you could find some free time, please take a look at this coin and this algorithm (https://bitcointalk.org/index.php?topic=553593.0)
thanks


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: lobo13hf on July 13, 2014, 07:52:01 AM
How can nist5 be cooler when my rigs gets hot as they did with X11?and my fan are louder now???



Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: GhostPlayer on July 13, 2014, 08:59:55 AM
How can nist5 be cooler when my rigs gets hot as they did with X11?and my fan are louder now???



First time using nist5 with this baby on on my 5x 280x rig! It is much more optiimized it seem, than other miners? I dont know, first time trying out nist5, and haven't dug much into it.

 I get 4.15mh/s per BIOS undervolted 280x on x11
 I get 5.85mh/s on nist5

 Exact same settings. Does this look good, or should I try tweaking my configs all all?


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: go6ooo1212 on July 13, 2014, 09:55:53 AM
with 280X you have to reach about 13 MH with modded talkcoin kernel...


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: djm34 on July 13, 2014, 10:25:02 AM
How can nist5 be cooler when my rigs gets hot as they did with X11?and my fan are louder now???



First time using nist5 with this baby on on my 5x 280x rig! It is much more optiimized it seem, than other miners? I dont know, first time trying out nist5, and haven't dug much into it.

 I get 4.15mh/s per BIOS undervolted 280x on x11
 I get 5.85mh/s on nist5

 Exact same settings. Does this look good, or should I try tweaking my configs all all?
yes you should get a lot more than that


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: novirudarzg on July 13, 2014, 03:17:17 PM
guy how can i mine nist5 algo on linux bamt ... any good link ... coz i cant find.
i have bamt1.6.2
ty very much


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: ikom on July 13, 2014, 05:56:35 PM
Please can somebody share  NIST5 .bin created with AMD 14.6 drivers for 280x (nist5Tahitiglg....bin)?

Thx


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: bensam123 on July 14, 2014, 02:06:12 PM
Not sure how you're supposed to use nist5 with this miner, the kernel isn't included... :l

Looking a bit closer, none of the algos mentioned in the opening post are included with this release. Was the upload file changed to something else?


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: lobo13hf on July 14, 2014, 03:06:26 PM
Please can somebody share  NIST5 .bin created with AMD 14.6 drivers for 280x (nist5Tahitiglg....bin)?

Thx

hereyou go
Code:
https://mega.co.nz/#!ohMVVQjZ!Jbhr82S1ZsXGBPx0PaoU632DlN-g3n0TemNbMRbpkIc

i get 13-13.50mh/s
i run 2 7970s and 1 280x on this rig hope it helps...


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: j0hnwayne on July 15, 2014, 05:28:35 PM
Do 14.6 drivers capable to run 6 GPU's in win8.1? I've already tried to install but only 5 GPU's are running okay, can't get rid of code 43 error for the 6th gpu. Any clue?



I have the same problem and been trying to fix it for 2 weeks now.  Since I updated to 14.6 I can only get 5 gpu's to work and get error 43 on the other.  Runnings Windows 8.1 64 bit.   I used the amd cleanup utility to wipe 14.6 and went back to 13.12 since thats what I had before but it didn't help.

Does anyone have a fix for this?


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: sp_ on July 15, 2014, 08:54:06 PM
This is the miner I use. If you have problems with your card delete the .conf file that is included and pass parameters on the command line instead.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: criss_sl on July 22, 2014, 07:52:07 AM
hi, this sgminer work pn x15 (algorithm bitblock)) or not?


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: Eastwind on July 22, 2014, 08:34:31 AM
Do 14.6 drivers capable to run 6 GPU's in win8.1? I've already tried to install but only 5 GPU's are running okay, can't get rid of code 43 error for the 6th gpu. Any clue?



I have the same problem and been trying to fix it for 2 weeks now.  Since I updated to 14.6 I can only get 5 gpu's to work and get error 43 on the other.  Runnings Windows 8.1 64 bit.   I used the amd cleanup utility to wipe 14.6 and went back to 13.12 since thats what I had before but it didn't help.

Does anyone have a fix for this?

You can go to https://litecointalk.org/index.php?topic=11761.0

There is a 14.6 7GPU mod there before.

I use the 14.4 mod and copy the 14.6 opencl files in the miner folder.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: minorthreat on August 02, 2014, 12:06:23 PM
I just want to start by saying thanks for the miner and the tips and tricks. I'm running a 4x r9 290 rig, and it has become extremely fussy. GPU 0 is always crashing.. I get the "display driver has stopped working", and GPU 0 (always GPU 0) will just degrade in temp and hash. The other 3 hash away fine. Shortly thereafter, sgminer crashes with the "sgminer has stopped working" crash. Im losing my mind trying to figure this out.
I have downloaded the updated sgminer for 14.6, and moved the 14.6 driver opencl files into the sgminer folder. I am running the 14.4 catalyst drivers (but when I look in device manager, it shows driver as 14.1 from 4/17/14, is this normal?) I never installed the 14.6 drivers, only extracted them to another file and pulled the opencl files as instructed in this thread..The hash rate has been amazing. The rig has run for many hours before any crashes in the past with this new miner. Now its crashing 5 or less minutes after starting the miner. I run a bare batch file, with just the setx commands, pool/login info, and intensity. I delete my bin file before running the miner after any tweaks. I have tried adjusting intensity and bringing it pretty low (15, 16) still same results.

win 7/64bit
14.4 driver
3x Gigabyte r9 290
1x Sapphire r9 290
2 gpu's on motherboard
2 gpu's on USB risers
2x PSU (1250w gold and 450w gold seasonics)

Thanks!


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: SalimNagamato on August 02, 2014, 02:15:22 PM
trying to compile the NIST5 version

Code:
-----------------------------------------------------------------------
sgminer 4.1.0
------------------------------------------------------------------------


Configuration Options Summary:

  Use git version......: yes
  libcurl(GBT+getwork).: Enabled: -lcurl 
  curses.TUI...........: FOUND: -lncurses
  OpenCL...............: FOUND. GPU mining support enabled
  ADL..................: SDK found, GPU monitoring support enabled

Compilation............: make (or gmake)
  CPPFLAGS.............:
  CFLAGS...............: -O2 -Wall -march=native
  LDFLAGS..............:  -lpthread
  LDADD................: -ldl -lcurl   compat/jansson-2.5/src/.libs/libjansson.a -lpthread -L/opt/AMDAPP/lib/x86 -lOpenCL    -lm -lrt

Installation...........: make install (as root if needed, with 'su' or 'sudo')
  prefix...............: /usr/local

xubuntu@xubuntu:~/sgminer-nist5$ make
fatal: No names found, cannot describe anything.
make  all-recursive
fatal: No names found, cannot describe anything.
make[1]: Entering directory `/home/xubuntu/sgminer-nist5'
Making all in lib
make[2]: Entering directory `/home/xubuntu/sgminer-nist5/lib'
.deps/memmem.Po:1: *** multiple target patterns.  Stop.
make[2]: Leaving directory `/home/xubuntu/sgminer-nist5/lib'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/xubuntu/sgminer-nist5'
make: *** [all] Error 2


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: cisahasa on August 07, 2014, 05:01:25 PM
best results mining x11 so far with this miner, 280x 4.4mhs

14.7 bins 13.xx drivers


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: solo20 on August 08, 2014, 06:23:27 PM
has there been anymore updates to the kernel?


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: kahir on August 10, 2014, 02:43:51 PM
Does this have Qubit Optimized with windows compiled


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: daigitinasam on August 12, 2014, 05:40:24 PM
Hey guys. Since yesterday i cannot mine with my sgminer 14.6

When i start he batch file the miner says:

"Probing for an alive pool"
"Waiting for work to be avaivable from pools"
"Setting gpu`s for idle performance"

I tried to remove BIN files but it doesnt work.
I`m using windows 8 with 5 290`s


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: go6ooo1212 on August 12, 2014, 06:54:38 PM
just try some other reliece , one of nicehash's for example


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: Pt0x on August 12, 2014, 08:20:07 PM
Has anyone been able to make this work under ubuntu ?

I did a fresh install of ubuntu 14.04 + 14.6 drivers, but I haven't been able to see the performance increase.

Any suggestions?


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: Stormbringer on August 15, 2014, 01:25:20 PM
Hi, anyone have bin file for R9 270, for nist5?
I couldnt seem to find it.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: cryptoangel on August 22, 2014, 09:44:43 AM
Anyone using this on W7 and know the maximum GPU.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: nathalie20 on September 15, 2014, 10:18:21 AM
Hey, guys. I have a little problem with kicking NIST5. it gives me this error -- >> http://zapodaj.net/73320ca303909.png.html
Do you know what could be causing this?


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: siliconchip on September 22, 2014, 12:56:34 AM
This sgminer doesn't contain HEFTY1 kernel.  >:(


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: IMJim on September 22, 2014, 10:32:44 PM
Anybody have optimized settings for 290X cards?


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: IMJim on September 25, 2014, 11:36:30 PM
I just want to start by saying thanks for the miner and the tips and tricks. I'm running a 4x r9 290 rig, and it has become extremely fussy. GPU 0 is always crashing.. I get the "display driver has stopped working", and GPU 0 (always GPU 0) will just degrade in temp and hash. The other 3 hash away fine. Shortly thereafter, sgminer crashes with the "sgminer has stopped working" crash. Im losing my mind trying to figure this out.
I have downloaded the updated sgminer for 14.6, and moved the 14.6 driver opencl files into the sgminer folder. I am running the 14.4 catalyst drivers (but when I look in device manager, it shows driver as 14.1 from 4/17/14, is this normal?) I never installed the 14.6 drivers, only extracted them to another file and pulled the opencl files as instructed in this thread..The hash rate has been amazing. The rig has run for many hours before any crashes in the past with this new miner. Now its crashing 5 or less minutes after starting the miner. I run a bare batch file, with just the setx commands, pool/login info, and intensity. I delete my bin file before running the miner after any tweaks. I have tried adjusting intensity and bringing it pretty low (15, 16) still same results.

win 7/64bit
14.4 driver
3x Gigabyte r9 290
1x Sapphire r9 290
2 gpu's on motherboard
2 gpu's on USB risers
2x PSU (1250w gold and 450w gold seasonics)

Thanks!


Dude, I feel your pain!  Been having this exact issue with one of my PCs for several days now and have driven myself absolutely mad trying to figure it out, I have tested numerous versions of SGMiner and they all are doing the same, crashes the driver after a few minutes.  On my main PC I have no problems, all is stable.....same cards in both machines as well.  Old drivers, new drivers........they all seem to have no effect, no matter what I have tried she continues to crash after a few minutes of hashing great.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: jimlp12 on November 25, 2014, 02:50:11 AM
DJM34;
           jimlp12 here, First I want to thank you for SGminer w/x11/x13..... I'm running windows 7 64-bit on a gigabyte ga-a75m-ud2h mobo, 8gB ddr3 @1600 MHz, 2-500gB 2.5" notebook drives in my desktop. My GPU is the on board integrated AMD Radeon HD 6550D on the AMD A8 series 3870 APU @3.0gb.  I've only been at this a month started w/BTC, went LTC now I'm mining DRK's. Most mining software was Linux bound, few window rigs. Many I got-crashed or were blocked from dwn/lding... so I was seeking a newer v of sgminer and found were Kosmos fixed ur's. I got it off Mega.co.nz just a few hours ago (5:30 PM) MST. I also got amd drivers 14.6 and installed, set bat file & config file, let it run. At first, I thought it wasn't going to.... my cmd prompt said x11 is experimental... but it took off...!!! yay.!
  Before, I was running the same rig & sgminer 4.1.0 ..? On, my GPU w/I set @ 11... I was getting hashrate of: 49.51/41.57Kh/s w/(avg) of 41.38Kh/s.... other values don't mater now... This evening @ 5:32 PM when I ran your Fixed 14.6 sgminer @ my mulitpool, well.... feast your eyes:
  (avg): 197.7Kh/s, I:11, R:0 HW:0 A:12 @5:44 PM, WU: 0.002/m, my multipool says I'm doing Hashrate of 210Kh/s in DRK using stratum+tcp: @ 6:30 PM (an hour later) (avg): 197.4Kh/s, A: 81 R: 2 HW: 0 WU: 0.003/m....! YAY..!
   Next month (Dec.) I'm going to buy an AMD Radeon HD 6670 GPU card PCIe slot x16... the HD 6550D only has Shaders of 400, and a thread-concurrency of 6400. I have to stay w/the 6670 bcuz if I get something newer, I'll have to buy a monitor bcuz mine is SVGA- 15-pin "D"port. All the newer cards have a different video port....? Since I'm disabled and cant afford a ASIC $3,000.00 miner or a new Monitor...I have to watch my $'s.... Thanks Man for a great Miner...! If & when I make some extra $... I'll donate....
  I need to figure out how to stop & start the Miner, since there's no Menu on CMD to make any adjustments....I guess most ppl just set it & go...? I learned that one can not just "X" it out bcuz if ya do ya lose all your A's......

James.....


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: Nthused on March 03, 2015, 07:43:35 PM
After tweaking an AMD r9 280x with 14.9 Drivers on x11 Algorithm I got a stable 4.3Mhs with these settings on sph-sgminer_x13mod.

--kernel x11mod -o stratum+tcp://ilt.suprnova.cc:5510 -u Username -p password --thread-concurrency 8192 -I 19 --lookup-gap 2 -w 256 -g 2 --gpu-engine 1175 --gpu-memclock 1500


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: go6ooo1212 on March 03, 2015, 07:54:00 PM
After tweaking an AMD r9 280x with 14.9 Drivers on x11 Algorithm I got a stable 4.3Mhs with these settings on sph-sgminer_x13mod.

--kernel x11mod -o stratum+tcp://ilt.suprnova.cc:5510 -u Username -p password --thread-concurrency 8192 -I 19 --lookup-gap 2 -w 256 -g 2 --gpu-engine 1175 --gpu-memclock 1500

14.9 sucks , you have to take 14.7RC3


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: Nthused on March 03, 2015, 08:51:19 PM
After tweaking an AMD r9 280x with 14.9 Drivers on x11 Algorithm I got a stable 4.3Mhs with these settings on sph-sgminer_x13mod.

--kernel x11mod -o stratum+tcp://ilt.suprnova.cc:5510 -u Username -p password --thread-concurrency 8192 -I 19 --lookup-gap 2 -w 256 -g 2 --gpu-engine 1175 --gpu-memclock 1500

14.9 sucks , you have to take 14.7RC3

I've now downloaded this miner and .bin & also followed the tutorial.

I am now getting 6.7Mhs-6.8Mhs on X11 with my 280x  ;D

https://cryptomadness.wordpress.com/2014/12/05/new-x11-sgminer-with-p-percent-of-increasing-hashrate


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: go6ooo1212 on March 03, 2015, 09:09:50 PM
nice hash , congratulations :)


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: cryptoangel on March 03, 2015, 09:14:18 PM
Has anyone looked into this new miner?, sounds to good to be true.

Staying away.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: Nthused on March 03, 2015, 09:35:44 PM
Has anyone looked into this new miner?, sounds to good to be true.

Staying away.

Here is a screenshot of me mining with it if you don't believe it.

http://i.imgur.com/Zi14Tfz.jpg?1


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: cryptoangel on March 03, 2015, 09:39:04 PM
I believe you  ;) I just don't trust it until someone with knowledge can look into it.

See what it is doing in the background.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: bronan on March 04, 2015, 01:09:07 AM
Can not get driver package 14.7.rc3 stable on my machine 14.9 runs very stable
Waiting on AMD to release the new toy which some leaked info suggest (38x - 39x)
I saw the post about that miner and see they released so called version 5.2 as well
However i do not see source code available that kinda scares me, i seen this before someone released a miner which was darn fast but later some of your coins are gone.
Or in an other case the miner send shares to the one who made the program.
So even though it appears pretty fast did you check the pool and see if you actually see real increase or is it like the one who stole some of the mining income.
To be honest i dare not try it out, even though i have very large passwords on my wallets that in itself does not make them safe from hacking if they got them.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: Nthused on March 04, 2015, 01:22:15 AM
Can not get driver package 14.7.rc3 stable on my machine 14.9 runs very stable
Waiting on AMD to release the new toy which some leaked info suggest (38x - 39x)
I saw the post about that miner and see they released so called version 5.2 as well
However i do not see source code available that kinda scares me, i seen this before someone released a miner which was darn fast but later some of your coins are gone.
Or in an other case the miner send shares to the one who made the program.
So even though it appears pretty fast did you check the pool and see if you actually see real increase or is it like the one who stole some of the mining income.
To be honest i dare not try it out, even though i have very large passwords on my wallets that in itself does not make them safe from hacking if they got them.

It was posted by wolf0 as it was his creation and some people leaked it, so he decided instead of selling it to release the proper version and instructions for it.

Him and a few other respected CPU/GPU creators have been selling there optimized miners and whilst reading this article found out this was released at the end of last year in December.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: bronan on March 04, 2015, 01:28:37 AM
I got an total different link where you get a so called new sgminer 5.2 which seems to auto update
I see your link just provides *.bin files so that looks ok to me, going to try the bin and see what it does


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: Nthused on March 04, 2015, 01:37:03 AM
I got an total different link where you get a so called new sgminer 5.2 which seems to auto update
I see your link just provides *.bin files so that looks ok to me, going to try the bin and see what it does

The .bin provided by wolf0 works with sgminer 5.1

EDIT: I've found the same optimized .bin files created by wolf0 as well.

https://www.nicehash.com/download/wolf-optimized-X11-X13-X15-algos.zip


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: xgtele on March 04, 2015, 04:09:47 AM
Can not get driver package 14.7.rc3 stable on my machine 14.9 runs very stable
Waiting on AMD to release the new toy which some leaked info suggest (38x - 39x)
I saw the post about that miner and see they released so called version 5.2 as well
However i do not see source code available that kinda scares me, i seen this before someone released a miner which was darn fast but later some of your coins are gone.
Or in an other case the miner send shares to the one who made the program.
So even though it appears pretty fast did you check the pool and see if you actually see real increase or is it like the one who stole some of the mining income.
To be honest i dare not try it out, even though i have very large passwords on my wallets that in itself does not make them safe from hacking if they got them.

It was posted by wolf0 as it was his creation and some people leaked it, so he decided instead of selling it to release the proper version and instructions for it.

Him and a few other respected CPU/GPU creators have been selling there optimized miners and whilst reading this article found out this was released at the end of last year in December.

https://www.reddit.com/r/DRKCoin/comments/2o1yoz/rewritten_x11_binaries/


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: cryptoangel on March 04, 2015, 08:52:40 AM
Tried this and the miner saying all devices disable, cannot mine.

My normal miner works fine.

Any ideas ?.

http://imgur.com/4hvDZWc

http://imgur.com/4hvDZWc


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: bronan on March 04, 2015, 11:23:29 AM
sorry mate i can not watch imgur images nor do i want to

I have been testing the wolf-0 bin files on my old 7970  rig with sgminer 5.0 and see it actually makes a staggering 6.3 Mh/s on X11 coins depending on which one it seems some go near 6.7 Mh/s
What strikes me the most is that my card has stayed this far well below 62C

So fast and awesome cool, but it might take a while to get the huge cooler heated up so ill upgrade that if it goes much higher
The card runs at 1050 Mhz with normal 1425 Mhz memory speed and -I 19

It works perfect on the latest amd drivers 14.12 i have no idea if it works for newer cards


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: MidwestMiner on March 15, 2015, 03:05:37 PM
Is there even a point to running GPU these days? I tried calculating mining revenue and with 4x R9 280x it doesn't even cover power cost for x11 (cannabiscoin). Am I doing anything wrong?


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: pallas on March 15, 2015, 04:21:26 PM
Is there even a point to running GPU these days? I tried calculating mining revenue and with 4x R9 280x it doesn't even cover power cost for x11 (cannabiscoin). Am I doing anything wrong?

For me cost is 3x mining income... A little better with optimized kernels but still highly unprofitable.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: djm34 on March 15, 2015, 06:04:42 PM
Is there even a point to running GPU these days? I tried calculating mining revenue and with 4x R9 280x it doesn't even cover power cost for x11 (cannabiscoin). Am I doing anything wrong?

For me cost is 3x mining income... A little better with optimized kernels but still highly unprofitable.
depends what you mine...
I didn't know that thread was still alive... in principle there are better miners around now on the mining part of the forum...


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: MidwestMiner on March 15, 2015, 11:20:04 PM
Is there even a point to running GPU these days? I tried calculating mining revenue and with 4x R9 280x it doesn't even cover power cost for x11 (cannabiscoin). Am I doing anything wrong?

For me cost is 3x mining income... A little better with optimized kernels but still highly unprofitable.
depends what you mine...
I didn't know that thread was still alive... in principle there are better miners around now on the mining part of the forum...

What do you suggest I mine with GPU? (280/290x)?


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: BOBAN on June 13, 2015, 08:58:51 PM
does this version work for ftc (neoscrypt)?

Also, do i have to boot windows in safe mode to use DDU to remove my current driver, or can I just run DDU in regular mode and then restart when prompted.  Which driver do I then install?  And, can I upgrade back to my current driver after the bin file has been created?  My current cataylst version is 15.5.

Thanks.

P.S:  sorry for all the questions, I'm still relatively new to mining.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: richtrix on June 19, 2015, 05:08:46 AM
Hi Guys,
was just surfing around looking for the best X11 info. I used to mine BTC with my GPUs, then Scrypt which was REALLY fantastic for a while (multipool!) but got Goxed out of a lot of that (stupid me). Did some X11 and Scrypt N mining for a while. Then just got burned out by low profits and constant maintenance (40ish GPUs in 9 machines). Feeling better now and I think I'll get back in the saddle. Is the SGminer fork posted back in March still the best bet? I am looking at the X11 types because the lower GPU temps, over time, should save wear and tear over BTC, Scrypt and Scrypt-N etc. I actually love GPU mining (even wrote a little article about it http://actualeconomy.com/2014/03/ode-to-gpu-mining/ (http://actualeconomy.com/2014/03/ode-to-gpu-mining/)) and hope that it becomes more viable again soon and stays around. Though if 7970s ever go for $400 a pop again I might have to cash out :) Look forward to your comments! Oh and send any good 7970 configs you have my way. I am running 13.x drivers... should I update? I know that there are new ones now... but I also know that that doesn't mean they are better.

Thanks!
Rich


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: okane818 on March 03, 2016, 06:12:20 AM
@djm34

Thank you a lot for this great sgminer  :)

I fixed the idle/work resuming problem.

This is the download link for the fixed miner: https://mega.co.nz/#!ZsJTALQI!qDh9jCWULjabTDPYq0K4fZamdZrPwot7m7AAfTEOJPQ (https://mega.co.nz/#!ZsJTALQI!qDh9jCWULjabTDPYq0K4fZamdZrPwot7m7AAfTEOJPQ)


I also opened a new thread (just in case) some will not notice this comment and the fixed version of the miner: https://bitcointalk.org/index.php?topic=658975.msg7412560#msg7412560

Download link gone. Please provide again the link.


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: pallas on March 03, 2016, 09:22:21 AM
@djm34

Thank you a lot for this great sgminer  :)

I fixed the idle/work resuming problem.

This is the download link for the fixed miner: https://mega.co.nz/#!ZsJTALQI!qDh9jCWULjabTDPYq0K4fZamdZrPwot7m7AAfTEOJPQ (https://mega.co.nz/#!ZsJTALQI!qDh9jCWULjabTDPYq0K4fZamdZrPwot7m7AAfTEOJPQ)


I also opened a new thread (just in case) some will not notice this comment and the fixed version of the miner: https://bitcointalk.org/index.php?topic=658975.msg7412560#msg7412560

Download link gone. Please provide again the link.

If you don't have a specific reason to use this old version, may I suggest you use the most advanced fork, which is nicehash sgminer?


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: bbopa637 on March 30, 2016, 01:18:32 AM
WHY all people here is uploading to this worst site ever: https://mega.co.nz/  ?????????? WHY??? 90% of links of bitcointalk is not working beacause of that mega.co.nz!!!! Damn it!!


Title: Re: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers
Post by: bbopa637 on March 30, 2016, 01:21:53 AM
After tweaking an AMD r9 280x with 14.9 Drivers on x11 Algorithm I got a stable 4.3Mhs with these settings on sph-sgminer_x13mod.

--kernel x11mod -o stratum+tcp://ilt.suprnova.cc:5510 -u Username -p password --thread-concurrency 8192 -I 19 --lookup-gap 2 -w 256 -g 2 --gpu-engine 1175 --gpu-memclock 1500

14.9 sucks , you have to take 14.7RC3
14.7 RC3 is givin all HW errors in sph-sgminer_x11mod sgminer 4.1.0 ! And nothing else! Just tested!