Title: BFL SGL300G dead Post by: jburke5000 on July 23, 2014, 06:30:34 AM Hello All,
I purchased a Butterfly Labs 30GH from Ebay. I did not go into this blind. They told me that it was DOA, figured for 25 dollars what the heck. What I found was a burn spot on the PCB board right below the asic and right above R40 and R42. Looks like the placement was C11?. First does anyone know what this is on the board? Can it be fixed? I sent an e-mail to Butterfly Labs asking if they would RMA it since it was the board. We will see what they have to say. Otherwise just getting ideas on what I could do. Thanks for any help. Let me know if you would like a picture of the board. For additional info. John Title: Re: BFL SGL300G dead Post by: byt411 on July 23, 2014, 06:32:29 AM Butterfly Labs are scammers, so no, they won't RMA at all.
I suppose it's some resistor or capacitor, but without pictures I don't know. Fixing it would yield nothing anyway, so don't even bother. Title: Re: BFL SGL300G dead Post by: Unacceptable on July 23, 2014, 09:25:47 AM Talk to this guy,he's really good with old BFL miners ;)
https://bitcointalk.org/index.php?topic=336782.msg7232404#msg7232404 By all means post a pic 8) Title: Re: BFL SGL300G dead Post by: bcp19 on July 23, 2014, 09:39:44 AM Hello All, Did you email directly or did you use the form on the website? http://butterflylabs.com/technical-support/ is the link, make sure you mention that it is a 3rd party RMA.I purchased a Butterfly Labs 30GH from Ebay. I did not go into this blind. They told me that it was DOA, figured for 25 dollars what the heck. What I found was a burn spot on the PCB board right below the asic and right above R40 and R42. Looks like the placement was C11?. First does anyone know what this is on the board? Can it be fixed? I sent an e-mail to Butterfly Labs asking if they would RMA it since it was the board. We will see what they have to say. Otherwise just getting ideas on what I could do. Thanks for any help. Let me know if you would like a picture of the board. For additional info. John Title: Re: BFL SGL300G dead Post by: aurel57 on July 23, 2014, 09:44:42 AM Hello All, Did you email directly or did you use the form on the website? http://butterflylabs.com/technical-support/ is the link, make sure you mention that it is a 3rd party RMA.I purchased a Butterfly Labs 30GH from Ebay. I did not go into this blind. They told me that it was DOA, figured for 25 dollars what the heck. What I found was a burn spot on the PCB board right below the asic and right above R40 and R42. Looks like the placement was C11?. First does anyone know what this is on the board? Can it be fixed? I sent an e-mail to Butterfly Labs asking if they would RMA it since it was the board. We will see what they have to say. Otherwise just getting ideas on what I could do. Thanks for any help. Let me know if you would like a picture of the board. For additional info. John Title: Re: BFL SGL300G dead Post by: jburke5000 on July 24, 2014, 06:13:25 AM To Unacceptable: I have been in touch with Lightfoot. He is the end all be all when it comes to BFL Miners. I read a lot of his posts and plan in trying to do some of the stuff he has done. This is an education for me.
To bcp19: I am a registered user of the Butterfly Labs site, so I used the RMA form. To byt411: Guess what. They are proving you wrong so far. http://s15.postimg.org/4ilpd7ocb/DSC01746.jpg Butterfly Labs got back to me and stated they will accept my RMA, very professional and very quick response. Sent them my shipping address since this is second hand and I am now awaiting further instructions. I know there are a lot of posts out there regarding poor customer support, but so far top notch. Title: Re: BFL SGL300G dead Post by: Unacceptable on July 24, 2014, 07:41:40 AM Hope BFL follows thru for you!! They're ok I guess on RMA's,BUT DO NOT BUY ANYTHING from them,they take forever to make & ship stuff :D
Thought you'd do good with ol lightfoot,I'm amazed at what he did with his miners ;) Title: Re: BFL SGL300G dead Post by: Xian01 on July 24, 2014, 08:19:15 AM To byt411: Guess what. They are proving you wrong so far. Welcome to the hardware sub. I would urge you to research the storied history of Butterfly Labs on these forums.The following links are reasonable starts. https://bitcointalk.org/index.php?topic=525840.0 :: [BFL] List of Lies https://bitcointalk.org/index.php?topic=136392.0 :: Bryan Micon's Butterfly Labs Scammer Investigation including Josh Zerlan https://bitcointalk.org/index.php?topic=110805.0 :: Re: Butterfly Labs CEO 25 Million USD Mail Fraud — A Concise Summary of Evidence https://bitcointalk.org/index.php?topic=682150.0 :: Sonny Vleisides (Butterfly Labs CEO) 2014 Court Transcript [The TL/DR version] Title: Re: BFL SGL300G dead Post by: DrG on July 24, 2014, 10:22:24 AM Hope BFL follows thru for you!! They're ok I guess on RMA's,BUT DO NOT BUY ANYTHING from them,they take forever to make & ship stuff :D Thought you'd do good with ol lightfoot,I'm amazed at what he did with his miners ;) I would object to that, at least in my experience. I received my Day 1 pre-order on July 8th 2013 and less than 4 days later it was dead - losing over 1BTC per day. BFL took a total of 13 days to complete my RMA and this was with me sending it Express next morning shipping and BFL sending it back Priority. Of course now all their employees except BCP19 are sitting around shooting the breeze waiting for God to fix their Revision Z boards so have time to do "speedy RMAs". But I'm not bitter or anything ::) :'( Title: Re: BFL SGL300G dead Post by: Flying Hellfish on July 24, 2014, 11:45:34 AM Of course now all their employees except BCP19 are sitting around shooting the breeze waiting for God to fix their Revision Z boards so have time to do "speedy RMAs". But I'm not bitter or anything ::) :'( Are you kidding me, the plants probably running 24/7 pumping out unsellable 300gh/s cards for the farm... ;) |