|
Title: S3+ B11 boot problems Post by: Codemeister on December 04, 2014, 01:16:15 AM Hey all,
I have a S3+ B11 right here which stopped working. I'm not sure why, but after I changed the IP I cannot connect to the machine anymore. I tried resetting the machine but nothing worked. The green LED and the red LED are on (not blinking, both just on). When I run a network scan I can see the IP from the machine, but I cannot ping it or connect to it. I tried a crossover cable, setting a static IP to my computer and connecting it 1on1, tried resetting it.... I got no ideas left. Do you guys have any suggestions or ideas? Edit: when I try resetting the machine, the LEDs just stay on. After reading pretty much all related posts on Bitcointalk, still no working solution for this issue. Help! :( Title: Re: S3+ B11 boot problems Post by: Nite on December 04, 2014, 03:25:25 AM do you have it connected through a router? the router should show what network IP its using
Title: Re: S3+ B11 boot problems Post by: Codemeister on December 04, 2014, 09:36:45 AM Yes I did find out it is using 192.168.0.180 in a IP scanning tool, but I cannot ping or reach it. Cannot reset, as that button does nothing...
Title: Re: S3+ B11 boot problems Post by: aurel57 on December 04, 2014, 09:48:09 AM Maybe you should have posted this in the "S3 support thread" so they can help you. https://bitcointalk.org/index.php?topic=671189.0 (https://bitcointalk.org/index.php?topic=671189.0)
Title: Re: S3+ B11 boot problems Post by: MyRig on December 04, 2014, 09:56:02 AM PM Sent!!
Hey all, I have a S3+ B11 right here which stopped working. I'm not sure why, but after I changed the IP I cannot connect to the machine anymore. I tried resetting the machine but nothing worked. The green LED and the red LED are on (not blinking, both just on). When I run a network scan I can see the IP from the machine, but I cannot ping it or connect to it. I tried a crossover cable, setting a static IP to my computer and connecting it 1on1, tried resetting it.... I got no ideas left. Do you guys have any suggestions or ideas? Edit: when I try resetting the machine, the LEDs just stay on. After reading pretty much all related posts on Bitcointalk, still no working solution for this issue. Help! :( Title: Re: S3+ B11 boot problems Post by: Codemeister on December 05, 2014, 04:41:58 PM Follow-up on this issue: controller board has been sent to Bitmain for replacement.
Title: Re: S3+ B11 boot problems Post by: pak13 on December 08, 2014, 10:55:56 PM Please post when you get it working. It will be interesting to know support times, repair times, shipping times and therefore overall down time.
|