|
Title: Antminer S5 Fan Mods - Little Help? Post by: pokeyjones on February 12, 2015, 06:29:20 PM Seems like a limited amount of information out there on this one. Is there a thread or two here someone might point me to?
Looks like 120mm JetFlo fan is one way to go. Using Corsair CX750M's would like a simple swap, if I need splitters to power then via molex can do. Saw a video (no info given), just a once over of the setup with a db meter a few feet away. Looks like a swap of the JetFlo fan for the stock fan, then they added a shrouded fan out back. Another item/solution I'm hoping to find... a "cold air intake" for the miners. I've got all the cold air you could want by cracking a window. Somebody have a slick window stop with a small intake hose and fan? Kind of stretching this one, but you never know. thanks Title: Re: Antminer S5 Fan Mods - Little Help? Post by: judypug1956 on February 12, 2015, 06:52:57 PM Seems like a limited amount of information out there on this one. Is there a thread or two here someone might point me to? Looks like 120mm JetFlo fan is one way to go. Using Corsair CX750M's would like a simple swap, if I need splitters to power then via molex can do. Saw a video (no info given), just a once over of the setup with a db meter a few feet away. Looks like a swap of the JetFlo fan for the stock fan, then they added a shrouded fan out back. Another item/solution I'm hoping to find... a "cold air intake" for the miners. I've got all the cold air you could want by cracking a window. Somebody have a slick window stop with a small intake hose and fan? Kind of stretching this one, but you never know. thanks link to the jet flow? does it move 150cfm? your window idea interests me. I could cut a wooden board width of the window. use a dryer vent duct air goes right to the s-5 http://www.homedepot.com/p/Master-Flow-6-in-Air-Tite-Take-Off-ATTO6/100143514 http://www.homedepot.com/p/Master-Flow-6-in-x-25-ft-Insulated-Flexible-Duct-R6-Silver-Jacket-F6IFD6X300/100396935 Title: Re: Antminer S5 Fan Mods - Little Help? Post by: pokeyjones on February 13, 2015, 02:23:37 AM Seems like a limited amount of information out there on this one. Is there a thread or two here someone might point me to? Looks like 120mm JetFlo fan is one way to go. Using Corsair CX750M's would like a simple swap, if I need splitters to power then via molex can do. Saw a video (no info given), just a once over of the setup with a db meter a few feet away. Looks like a swap of the JetFlo fan for the stock fan, then they added a shrouded fan out back. Another item/solution I'm hoping to find... a "cold air intake" for the miners. I've got all the cold air you could want by cracking a window. Somebody have a slick window stop with a small intake hose and fan? Kind of stretching this one, but you never know. thanks link to the jet flow? does it move 150cfm? your window idea interests me. I could cut a wooden board width of the window. use a dryer vent duct air goes right to the s-5 http://www.homedepot.com/p/Master-Flow-6-in-Air-Tite-Take-Off-ATTO6/100143514 http://www.homedepot.com/p/Master-Flow-6-in-x-25-ft-Insulated-Flexible-Duct-R6-Silver-Jacket-F6IFD6X300/100396935 You've got the idea. I figure near freezing air coming in the front (miner faces window) and out the back comes the heat for my apartment. I think the trick will be having a single board with 3 individual intakes, or one large intake with a feeder shroud. As much as I like mining, I like fooling around with the gear. Title: Re: Antminer S5 Fan Mods - Little Help? Post by: Rabinovitch on February 13, 2015, 10:33:12 AM Looks like 120mm JetFlo fan is one way to go. There are many suitable fans... https://bitcointalk.org/index.php?topic=919018.msg10095261#msg10095261 (https://bitcointalk.org/index.php?topic=919018.msg10095261#msg10095261) I'm with two of Gembird DC120SF-12AS3 fans now (120x120x38 mm, 3000 rpm, 124.74 CFM). They are very cheap. ::) Title: Re: Antminer S5 Fan Mods - Little Help? Post by: pokeyjones on February 13, 2015, 10:08:31 PM Looks like 120mm JetFlo fan is one way to go. There are many suitable fans... https://bitcointalk.org/index.php?topic=919018.msg10095261#msg10095261 (https://bitcointalk.org/index.php?topic=919018.msg10095261#msg10095261) I'm with two of Gembird DC120SF-12AS3 fans now (120x120x38 mm, 3000 rpm, 124.74 CFM). They are very cheap. ::) That is one hell of a write up! Thank you! How about the Corsair fans? Any other options? And please, if it is a straight swap that would be ideal. Simply remove old fan, screw in new fan, connect stock connectors, let it rip. thanks! |