Show Posts
|
Pages: [1] 2 3 4 5 6
|
They tried to scam me yesterday on telegram. They still continue...
|
|
|
Hallo! Value von BLX ist falsch. Bitte Datenquelle prüfen. Nach dem wäre ich 122-facher Millionär ggg
|
|
|
no hassle, still many miners are working, will let the benchmark run until all miner-algo-combis are complete, then i try to update nvidia again, hope the 398 will then be working.
|
|
|
currently i have serious problems gettin driver later than 388 installed, the driver install is crashing , black screen, unresponsive, after restart windows tries to repair, fails, restarts, crashes and thats it. will try to set restore point and do a manual driver update after basic windows downloaded driver. yesterday i had to reinstall windows 3 times... i hate it
|
|
|
just 2 1060 for now :-) testing purpose atm. What files do i need to replace? currently using latest release from github.
|
|
|
This neat tool is really amazing, however i have a few open questions: On Restart does it always start to benchmark? How to avoid this, as it takes really long time to test the non-working Algo-Miner-Gpu-combinations... There are many miners which are not working, only a few support my current setup, how do i exclude those miner-software from benchmarking? How to force only one errorous test per tested miner-algo combination, not 3? thx
|
|
|
Processor: Intel Core i7-950 3.07HGz RAM: 12GB DDR3 TripleChannel NVIDIA GeForce GTX 1050 Ti OS: Windows 10 Pro 64 bit Browser: Chrome / Firefox
|
|
|
now synced shield-qt again, now 4 of 5 tx show up, but the fist one is still missing in QT-Wallet, but appears on altmix.org... 9209325bfef62b89baf27c946f90e328cdece78be40b35f27d4c06aca00701a6 is TX ID value is around 0.19XSH... Redownload Blockchain and do a sync again? Or what to do?
|
|
|
Now i see the tx on AltMix.org, but it does not show up on wallet?! How long does it take for a TX to show up? Or was there a problem with blockchain at all? Sorry... new at this currency
|
|
|
maybe it was answered before, but i did not find a solution: Installed Shield-QT windows, run, but no connection to network, downloaded whole Blockchain, but also no further connection... whats wrong? Do i need to edit some additional files? Do i have to add a server or so? Please help Thx
I have been using TOR nodes. https://github.com/ShieldCoin/SHIELD/wiki/Using-Tor-qt-nodesYou probably need to create a Shield.conf file and addnodes posted a couple posts above, restart wallet. If you need help with addnodes its similar to the TOR instructions I linked. btw new website is now up!! https://shieldcurrency.com Could someone post a valid SHIELD.conf please, with non tor nodes included? thx
|
|
|
maybe it was answered before, but i did not find a solution: Installed Shield-QT windows, run, but no connection to network, downloaded whole Blockchain, but also no further connection... whats wrong? Do i need to edit some additional files? Do i have to add a server or so? Please help Thx
|
|
|
I have a question: is the number of TX to a single adress in Electrum limited to a number of receives? currently mining to a single Adress and had 1500 TX to it. Had similar amount un XVG-Electrum-Wallet and there i had a huge problem to withdraw coins from it, because the tx would be to huge or the fee was extremely (compared to normal 0.1 to finaly 17.4)? And if this is an issue, what should be done to continue mining?
|
|
|
Is it project over or what?
It ain't over till it is over. As long at least one pool is working the coin is not dead. And i do not plan to shut it down. Carry the flame.
|
|
|
Ruben would you be able to recommend a pool besides corpool that has some sort of legitimacy. I wasn't able to connect to corpool.
Just use the one you like, you can check the payments with the block explorer, but owning a pool is easy to cheat. Obviously i would recommend my pool , but don't have much hashrate now, because the gpu miners are in other pools, so i am not mining anything...... Same here, hashrate is quite low... :-(
|
|
|
Ruben would you be able to recommend a pool besides corpool that has some sort of legitimacy. I wasn't able to connect to corpool.
themaxx2k.hopto.org:35585 rates: 1,1,1,0.1
|
|
|
just now i see 100 miners from almost same ips and identical address on my pool. and one with 132837.373649 unpaid shares?!?
imho there seems to be some strange things going on...
And not one single block since at least 5 hours...
Total 327 active miners. xdag> stats Statistics for ours and maximum known parameters: hosts: 260 of 260 blocks: 2467891 of 2467891 main blocks: 29400 of 29400 orphan blocks: 2 wait sync blocks: 0 chain difficulty: b07e72f707991c50c2494f7 of b07e72f707991c50c2494f7 XDAG supply: 30105600.000000000 of 30105600.000000000 hour hashrate MHs: 2331.07 of 263729.61 xdag> pool Pool config: 900:1.00:1.00:1.00:8:0.10. xdag>
|
|
|
@DEV please give description how to use the balance.cgi.c and block.cgi.c
What do i need to do with it? compile with gcc and place output as balance.cgi in cgi-bin? sorry not very familiar with webservers...
Still need help on getting it running. Short doc would be fine... which interpreter / command needs to be run? How to handle it? Please advice what is needed Please consult webmasters. It depends on server software. If cgi subsystem is already set up, then you need to 1) change source *.cgi.c putting your own path instead of /home/ec2-user/... 2) compile it using gcc 3) put binary to cgi-bin folder of webserver. understood. thats what i already did, but i need to tell webserver how to execute the balance.cgi or block.cgi... $HTTP["remoteip"] =~ "109.90.229.170" { alias.url += ( "/cgi-bin/" => "/var/www/html/cgi-bin/" ) $HTTP["url"] =~ "^/cgi-bin/" { cgi.assign = ( ".sh" => "/bin/sh" , ".cgi" => "./" <- which assignment is needed to run the compiled balance.cgi? ) } }
|
|
|
@DEV please give description how to use the balance.cgi.c and block.cgi.c
What do i need to do with it? compile with gcc and place output as balance.cgi in cgi-bin? sorry not very familiar with webservers...
Still need help on getting it running. Short doc would be fine... which interpreter / command needs to be run? How to handle it? Please advice what is needed
|
|
|
@DEV please give description how to use the balance.cgi.c and block.cgi.c
What do i need to do with it? compile with gcc and place output as balance.cgi in cgi-bin? sorry not very familiar with webservers...
|
|
|
and many pools did not update since many versions. Shouldnt the pools use the same version? Probably the latest or one previous, if newer has a bug? But why do so many not update? 0. D2097D92 0 sec, T13.847, local trust 127.0.0.1:0 1. E179A879 3 sec, T13.838, immediate trust 213.168.251.23:47498 2. 2F0F25FF 0 sec, T13.847, immediate trust 54.37.158.221:33108 3. 815316A3 4 sec, T13.838, immediate trust 95.105.233.208:16775 4. 2D1732C3 4 sec, T13.838, immediate trust 47.93.223.203:52954 5. 92410C72 3 sec, T13.838, immediate trust 52.232.109.201:44050 6. 8B91FAEF 0 sec, T13.845, immediate trust 195.24.64.107:41742 7. DBEB7E0E 0 sec, T13.847, immediate trust 24.234.35.55:34408 8. A358BA95 3 sec, T13.819, immediate trust 199.16.31.96:3356 9. 1CD002AF 2 sec, T13.838, immediate trust 45.63.58.16:13655 10. C458AF50 2 sec, T13.818, immediate trust 172.105.216.53:42246 11. C617902B 3 sec, T13.830, immediate trust 77.55.222.85:3355 12. 5849FF64 6 sec, T13.841, immediate trust 120.79.95.7:12563 13. 3C5F4D60 0 sec, T13.838, immediate trust 62.210.130.205:13654 14. 913C2EBB 8 sec, T13.838, immediate trust 139.99.101.187:41626 15. AAF94632 5 sec, T13.845, immediate trust 52.191.198.174:13655 16. CB166B56 3 sec, T13.847, immediate trust 66.11.125.30:888 17. 4DD9141E 4 sec, T13.819, auto trust 199.16.31.96:48314 18. 40316D1D 8 sec, T13.847, auto trust 47.93.223.203:52954
|
|
|
|