Which is currently the best NVIDIA driver version for ETH mining on 1060 in Win 10 64 Bit?
I use 384.94 and it works exactly at the same speed as what Claymore suggests. |
|
|
|
So what's more profitable zec or Ethereum for 1060?I see people are getting max 25.2mh Ethereum vs 345 sol zec
Could you please point me to the miner for ZEC that yields 345 sols? And also the config please? (power, cc, mc and fan speed) |
|
|
|
Hey Claymore, It would be great if you could tell us what "few minor bug fixes and improvements" you made. Not sure if you have seen that comment here but somebody already suggested this. It would be great if you could consider these. Devfee would be more efficient if you could detect best server, my miners use Asia servers, and i saw that devfee mine on US with 2-3 times higher ping. Though it is the same pool... Could you try to avoid DAG recreation each devfee? Maybe if you can detect that you can use same pools as miner is using currently for your fees you could just switch Workers/wallets. Would be much faster (for your dev fees as well as us  ) Thanks for your work |
|
|
|
Update 7/29/2017 All GTX 1060 Gaming (Micron Mem) Current Settings/Clocks + Hashrate:
Core Voltage = *
Power Limit = 50
Temp Limit = 75c
Core Clock = -150
Memory Clock = +800
Fan Speed = %75
1GPU Dual Mining stats 90/10:
ETC: 24.225 MH/s, PASC: 80.750 MH/s
8GPU Dual Mining Combined stats 90/10:
ETC: 193.8 MH/s, PASC: 645 MH/s
Wattage at the wall:
910 watts
Claymore Miner v9.7
24+ Mh/s at 50% power? This doesn't sound possible. Can you share a screenshot? |
|
|
|
I'm have program NoDevFee with silent mode
Inbox me.
Open source your code or get it reviewed by the well known seniors here. Or you are just another scammer. |
|
|
|
|
Great going. It would be good if you add how much (ETC) a miner earned out of each block. I depend on that chart a lot as I tune my rig's efficiency based on that.
PS: I contacted to inform your site was down for certain time but did not get a reply. A quick response (or a response at the least) in your support email is appreciated.
|
|
|
|
|
I had the same issue as well. The problem was heavy over clocking and under powering. Juice it up a bit more and reduce your OC
|
|
|
|
Do we not have even a single reverse engineer in this entire forum?  |
|
|
|
1060 3GB - Samsung Memory. Running at 24MH with OC. I've managed to get 24.8MH on these cards running stable but that's a lotta OC settings than I'm relaxed with. I'm doing 24.2-24.3MH/s average on 6GPU's now.  Why do you keep your fans at 97% and not sure if you observed or not, 1 of your fan is at 0% too (or did you set it to 0% too?). |
|
|
|
Consecutive blocks with luck favoring this pool. Always nice to see.  Now it just need few more miners to make the luck work its way out to the pool at a faster rate.  |
|
|
|
I think Falcons is on his vacation made from all the money he stole with this  |
|
|
|
What about the uncles?
uncles are paid out "full" to miners for example: uncle found with 3.125 etc and you have 1% pool share -> you get 0.03125 etc Perfect. Been running on your pool for a day and the yields are good. Stats and payouts are accurate 0% fee is a game changer Shame that people go to bigger pools and doesn't encourage smaller pools like yours. They need to try smaller pools to know how much profit they would reap out of it and how much the big guys take out of their pocket.. |
|
|
|
1060 3g hyrix, 80% TDP, core -200, men+600,19.5mh/s, so bad. claymore 9.7
if i set mem +650,it crashs.
using claymore this happen using ethminer 1060 mod will give u more speed mine is 65% tdp +100 core +880 memory getting 25mh on ethminer!!! Hello everyone, I'm super new to this mining thing so please bare with my stupidity. I'm running: 6x evga 1060 6gb ssc on simple mining os (Have 8 cards total but waiting on Dual PSU Adapter) Getting 25-25.15 MH/s per card Claymore-eth-v9.7 Overclocking settings: Core -100 Memory +1900 (which would be +950 on afterburner) Power limit 73 Target temp 80 Fan speed 50% Output is 73w per card and 515w for whole rig All cards are ranging from 35C-43C Rig: Z270-A Pentium G4400 G.Skill TridentZ 8gb ram EVGA 1000w GQ Am I doing this right or is this overclock killing my GPU's? Any advice for this newbie would help. Thank you. The OC settings you stated is fair enough to run it stable. And if it crashes, it would be because of less power for such OC. So juice it up a bit more and see if that works. However, nobody can know if you can get 25mh/s out of that. you need to play with it and find the acceptable settings yourself. 35-43C? where do you live? |
|
|
|
Why do you making this software when claymore puts in the -nofee option inside his miner ?
i mean is it necessary ?
using -nofee would reduce your hash rate. |
|
|
|
Looks interesting. Just shifted from nanopool to ethteam. Hope the rewards yield would be better |
|
|
|
HI - I am interested is this as well - based in South Africa
Could you give a quick break down of the software that you are using - might consider setting up something similar for myself and a few friends
thnx
Well, that would be costly. You could, with your friends, join this pool so you get fair share at a very faster rate than starting your own pool (0% fee too). |
|
|
|
Hey Claymore, some possible suggestions:
1. In monitor each miner could have own Altcoin settings, one miner mine SC other DCR, etc, maybe it is even possible to get this info from miner itself, as we use config to set altcoin..
2. Devfee would be more efficient if you could detect best server, mine miners use EU servers, and i saw that devfee mine on US with 2-3 times higher ping. Though it is the same pool...
3. Could you try to avoid DAG recreation each devfee? Maybe if you can detect that you can use same pools as miner is using currently for your fees you could just switch Workers/wallets. Would be much faster
Thanks for your work.
Those are some really good suggestions. Hope he considers it. |
|
|
|
Do you guys recommend any specific drivers for 6xgtx1070 mining ethereum with claymore?
Using latest drivers but getting "error cannot read temperature".
Seen some people recommend 382.53 and 382.33, while the miner says to use Another version.
Why don't you stick to 372.54 which Claymore has tested and proven working? I didnt even know 372.54 was recommended, thats why i am asking. Just want to know what most people use for these cards. Claymore says -> "10xx cards in Windows 7 x64: just use latest 372.54 drivers from Nvidia website. 10xx cards in Windows 10 x64: just use latest 372.54 drivers from Nvidia website, note that you must have Win10 Anniversary update". And obviously most of the miners would be using what he has recommended |
|
|
|
I'm using 4x gtx 1060, the 9.7 version is unstable btw mining with 9.6 sometimes getting this error - http://imgur.com/a/tz6YWanyone? thanks what are your OC settings? |
|
|
|
|
Show Posts
