I understand it!
Give me a little time to collect the info!
Whatever you think this thing WORKS!
I will provide details as soon as I can!
Do additional exclamation marks increase your penis size? I have no need in increasing it!!!!!!! (specially for you)!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
|
|
|
I understand it!
Give me a little time to collect the info!
Whatever you think this thing WORKS!
I will provide details as soon as I can!
|
|
|
What could you give us that would make us trust you? Let's see... - A detailed business plan
- Full financial reports
- Proof of identification
- Lots of references
- Collateral for a trusted member to hold and pay to investors if you default
That should do it! THANX!
|
|
|
This is a pure financial pyramyd that works in CIS, all over the Europe, Australia and USA!
Over 30 000 000 people are already in!
I will think of how to present the basic information to you and put it here tomorrow
|
|
|
LOW? any example where you can get more?
|
|
|
Everyone will get paid GUARANTEED!
Definitely makes me trust you. That is why I ask you to specify the details you need from me to assure you of that you'll recieve the money you invested +40% after minimum a month
|
|
|
Hi,everyone! I want to introduce a new HIGH-Income project to you! It has a very high 40% (complex, exponental percent) income each month for its participants. The profit may be in LR or BTC according to current exchange rates at the moment of withdrawal! Money may be invested for minimum a month! Example: You invest 1000 LR or 200 BTC on 01.01.2012 for 1 month 01.02.2012 1st month +40% = 1400 LR or 280 BTC You invest 1000 LR or 200 BTC on 01.01.2012 for 2 months 01.02.2012 1st month +40% = 1400 LR or 280 BTC 01.03.2012 2nd month +40% = 1960 LR or 392 BTC and so on... Everyone will get paid GUARANTEED!P.S.: The scheme works for real money very well! I just want to make it work for BTC and LR also or any kinds of online-currency if there would be any need! THIS IS MMM2011What this is you can read here: http://i-mmm.com/en/index.phpFAQhttp://i-mmm.com/en/faq.phpHOW TO REGISTERYou can do it here: Use invite code: redline888Then you can ask me to deposit BTC or LR How to participate?You can contact me directly for advise and consultation: Payment systems accepted:- Liberty Reserve
- Bitcoin
- Bank transfers
Financial PyraMMMid movie (english version)It is a story about MMM'94 in english amateur translation. http://www.youtube.com/watch?feature=player_embedded&v=lFx9dxUCxTcOther info videos: COUNTODWN0 days until I benefit! You also can! Today got my 40%))) Please ask if you have any questions
|
|
|
Disabled ulps! NOTHING changed
|
|
|
Hi guys! Updated CGminer to 2.3.6 and Catalyst to 12.4 and the framerate has dropped on my 3x5870 GPUs, 6950 is OK!
I cleaned OS from all drivers and 2.6 SDK, installed 2.5 SDK and 12.4 drivers and I can not return the performance back.
3x5870 are below 400 MH\s, I am used to see them working at ~430-450 MH\s.
Please tell me how to configure CGminer or OS to get MAXIMUM performance!
THANX
My CGminer config:
cgminer -o *** -u *** -p *** -I d,10,10,10 --gpu-fan 80-100 --gpu-engine 850,970-990,920,960 --gpu-memclock 300 ll ll ll ll V V V V 6950, 5870, 5870, 5870
Deleted .bin files after for miner to create new ones.
Created .bin are: phatk120223Caymanv2w128l4 phatk120223Cypressv2w128l4
And there is another thing:
clocks for 5870 GPUs are different but their hashrate is the same, why???
|
|
|
Have done it, nothing changed!
And there is another thing:
clocks for 5870 GPUs are different but their hashrate is the same, why???
Created .bin are: phatk120223Caymanv2w128l4 phatk120223Cypressv2w128l4
|
|
|
Hi guys! Updated CGminer to 2.3.6 and Catalyst to 12.4 and the framerate has dropped on my 3x5870 GPUs, 6950 is OK!
I cleaned OS from all drivers and 2.6 SDK, installed 2.5 SDK and 12.4 drivers and I can not return the performance back.
3x5870 are below 400 MH\s, I am used to see them working at ~430-450 MH\s.
Please tell me how to configure CGminer or OS to get MAXIMUM performance!
THANX
My CGminer config:
cgminer -o *** -u *** -p *** -I d,10,10,10 --gpu-fan 80-100 --gpu-engine 850,970-990,920,960 --gpu-memclock 300 ll ll ll ll V V V V 6950, 5870, 5870, 5870
|
|
|
client settings or gpu settings?
|
|
|
it downclocks each gpu by 10 MHz every second
|
|
|
Ok, I will try but the thing is when a VGA works ALONE the hashrate is high as it is used to be. The hashrate drops when I activate the 2nd VGA and drops even more if I activate the 3rd one.
Just out of curiosity, what kind of hardware problems have you eliminated so far? One reason I can think of why a second card might cause another to slow is that the power supply's output isn't high enough, but I'd expect a much higher impact on hashrate in that case. What I'd expect to be much more likely is that those graphics cards all use the same bus to communicate with the CPU/whatever, which would result in the behaviour you describe. One more thing for you to try, though (in case it is a software problem): if you manually set the intensity of the first card (start, say, with 3 and use cgminer's menu to go from there), does that help at all? What effects does that have (on the second and third cards, the effect on the first should be obvious)? (Just because I'm a little anal about these things: this is what "VGA" means: http://en.wikipedia.org/wiki/VGA) Concearning H/W problems did you mean my rig? PSU is Corsair AX1200 6 months old. "What I'd expect to be much more likely is that those graphics cards all use the same bus to communicate with the CPU/whatever, which would result in the behaviour you describe" What to do about that? Changing the intensity on any of GPUs (instead of VGA:)) did not lead to any improvement on others. But the thing I noticed is when I run phoenix and change the cpu affinity all the GPUs perform well (less hashrate than it was earlier but stable. I did not downgrade drivers) I will downgrade drivers and hope the hashrate will return to normal.
|
|
|
Ok, I will try but the thing is when a VGA works ALONE the hashrate is high as it is used to be. The hashrate drops when I activate the 2nd VGA and drops even more if I activate the 3rd one.
|
|
|
The cooling is not the source of this problem. Clocks are the same as they were when everything was perfect. Temps are perfect as well! It is something with OpenCL but I can not figure out what it is
|
|
|
Hi. The situation is as follows: I have 3 VGAs. Peak performance is 6950(326 MH/s), Asus 5870 (461 MH/s), Gigabyte 5870 (431 MH/s) When a single card is mining (6950 for example) everything is ok with its hashrate. When the second turns on the (Asus for example) hashrate drops and bounces from ~316 to ~326 for 6950 and ~326-367 for Asus and when I turn Gigabyte on the hashrate drops even more significantly ~296-309 6950, ~311-354 Asus, ~309-349 Gigabyte. What the hell is going on? I use Aoclbf 1.81 + Phoenix 1.7.0 whith modofied kernel + Cat 12.1 + Windows 7 x64 SP1 Flags are: -k phatk2 VECTORS2 BFI_INT FASTLOOP=false AGGRESSION=11 DEVICE=X Everything was perfect untill I installed Intel OpenCL SDK. Now I have uninstalled it but the problem remains. Today I tried CGminer 2.0.8! VGA clocks are the same! Flags are: cgminer -o http://pit.deepbit.net:8332 -u *** -p *** -I d,10,10 -k phatk This gives me ~306 MH/s for 6950, ~411 and ~ 396 for Asus and Gigabyte correspondingly. PLEASE help me to resolve a situation! Thanx in advance
|
|
|
Hi. The situation is as follows: I have 3 VGAs. Peak performance is 6950(326 MH/s), Asus 5870 (461 MH/s), Gigabyte 5870 (431 MH/s) When a single card is mining (6950 for example) everything is ok with its hashrate. When the second turns on the (Asus for example) hashrate drops and bounces from ~316 to ~326 for 6950 and ~326-367 for Asus and when I turn Gigabyte on the hashrate drops even more significantly ~296-309 6950, ~311-354 Asus, ~309-349 Gigabyte. What the hell is going on? I use Aoclbf 1.81 + Phoenix 1.7.0 whith modofied kernel + Cat 12.1 + Windows 7 x64 SP1 Flags are: -k phatk2 VECTORS2 BFI_INT FASTLOOP=false AGGRESSION=11 DEVICE=X Everything was perfect untill I installed Intel OpenCL SDK. Now I have uninstalled it but the problem remains. PLEASE help me to resolve a situation! Thanx in advance
|
|
|
Is Anyone going to reply my post? I have solved more than 700000 shares! I have 30 BTC hanging at your pool until the block is found!!!
|
|
|
Hi! I am the only miner at your pool and today I have got "Account has been locked"! What should I do to restore my account? Thanx!
|
|
|
|