|
Recently high miner fees for BTC let me think if we should not switch to another trading pair?
|
|
|
|
|
It won't harm to ask again how we can help you to sell C.A.T. to make sure that the commission (which I e.g., will use to add more key licenses) will be counted for me.
|
|
|
|
2017-03-04 09:49:39| OCR : Try To Create new Order (From GUI) PING : BUY 0.30423445@0.00315035 (Dynamic) 2017-03-04 09:49:43| OCR : Order Successfully Created Dynamic-PING-100001109473420 : BUY 0.30423445@0.00315035 Current 0.30423445 2017-03-04 09:50:07| PPA : Lookup 1929 Start. Update Market Orders,My Orders,My Trades. First Markets Checks Are Ok. Current Personal Last Prices : S:0.00324577 S_PI:N/A S_PO:0.00324577 B:0.00315035 B_PI:0.00315035 B_PO:N/A Best Market Prices : S:0.0031636/B:0.00315034 Current Orders/Trades : 1 Ping, 0 Pong, 0 Trades From Ping, 0 Orders To Restore, Pool Values : Buy 0.00191595/Sell 0.00000000 2017-03-04 09:50:07| PPO : Dynamic-PING-100001109473420 : BUY 0.30423445@0.00315035 Current 0.30423445 First Order Synch Call(Attempt 1) - Synch Successful! 2017-03-04 09:50:47| PPA : Lookup 1930 Start. Update Market Orders,My Orders,My Trades. Personal/Market Stats are the same as Previous Lookup 2017-03-04 09:50:47| OCR : Try To Create new Order (From Pool) PING : BUY 0.60817052@0.00315035 (Dynamic) 2017-03-04 09:50:50| OCR : Create Order (From Pool) Error From YoBit : Insufficient funds in wallet of the second currency of the pair What does it mean: Insufficient funds in wallet of the second currency of the pair |
|
|
|
|
I have stored the settings in a preset. If I select my preset, do I need to click update or not?
I would suggest if used settings and shown settings are different, or otherwise said, if we need to click the update button, can you make it flashing?
|
|
|
|
|
I am not sure if we can improve here something.
When I start an exchange, I get first the actual Markets list. Here I click twice on Sell Trades 24H to see the ordered list of most trading. Then I look down where it is more equal between Sell and Trade, because, I don't want to stuck with that coin. If I find something that has nearly equal trades I look up the closest coin I have already a balance. I use this coin for trading. However, if that coin has only a un-tradeable balance, then I ignore that one and choose another one.
Coins with balance are gray shown. Could we change that to two colors, reflecting if the balance is high enough for selling or not?
|
|
|
|
|
Poloniex Log window shows:
2017-03-03 12:04:56| {"error":"Nonce must be greater than 1498350681964134. You provided 1488513673200."}
|
|
|
|
I noticed that there were no trading yesterday. I found some death tradings. When I closed the program it said it has an ErrorLogFile: cat CAT_Log_2017-02-28_10_45_25.txt
Exception in thread "AWT-EventQueue-0" java.lang.NumberFormatException
at java.math.BigDecimal.<init>(BigDecimal.java:596)
at java.math.BigDecimal.<init>(BigDecimal.java:383)
at java.math.BigDecimal.<init>(BigDecimal.java:806)
at CAT.C_Env_Market.Z_Panel.Algorithm.JPanelPingUserCreator.a(Unknown Source)
at CAT.C_Env_Market.Z_Panel.Algorithm.JPanelPingUserCreator.access$400(Unknown Source)
at CAT.C_Env_Market.Z_Panel.Algorithm.q.mousePressed(Unknown Source)
at java.awt.AWTEventMulticaster.mousePressed(AWTEventMulticaster.java:280)
at java.awt.Component.processMouseEvent(Component.java:6530)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3324)
at java.awt.Component.processEvent(Component.java:6298)
at java.awt.Container.processEvent(Container.java:2236)
at java.awt.Component.dispatchEventImpl(Component.java:4889)
at java.awt.Container.dispatchEventImpl(Container.java:2294)
at java.awt.Component.dispatchEvent(Component.java:4711)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4888)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4522)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4466)
at java.awt.Container.dispatchEventImpl(Container.java:2280)
at java.awt.Window.dispatchEventImpl(Window.java:2746)
at java.awt.Component.dispatchEvent(Component.java:4711)
at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:758)
at java.awt.EventQueue.access$500(EventQueue.java:97)
at java.awt.EventQueue$3.run(EventQueue.java:709)
at java.awt.EventQueue$3.run(EventQueue.java:703)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.ProtectionDomain$JavaSecurityAccessImpl.doIntersectionPrivilege(ProtectionDomain.java:76)
at java.security.ProtectionDomain$JavaSecurityAccessImpl.doIntersectionPrivilege(ProtectionDomain.java:86)
at java.awt.EventQueue$4.run(EventQueue.java:731)
at java.awt.EventQueue$4.run(EventQueue.java:729)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.ProtectionDomain$JavaSecurityAccessImpl.doIntersectionPrivilege(ProtectionDomain.java:76)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:728)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:201)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:116)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:105)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:101)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:93)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:82)
Exception in thread "AWT-EventQueue-0" java.lang.NumberFormatException
at java.math.BigDecimal.<init>(BigDecimal.java:596)
at java.math.BigDecimal.<init>(BigDecimal.java:383)
at java.math.BigDecimal.<init>(BigDecimal.java:806)
at CAT.C_Env_Market.Z_Panel.Algorithm.JPanelPingUserCreator.a(Unknown Source)
at CAT.C_Env_Market.Z_Panel.Algorithm.JPanelPingUserCreator.access$400(Unknown Source)
at CAT.C_Env_Market.Z_Panel.Algorithm.q.mousePressed(Unknown Source)
at java.awt.AWTEventMulticaster.mousePressed(AWTEventMulticaster.java:280)
at java.awt.Component.processMouseEvent(Component.java:6530)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3324)
at java.awt.Component.processEvent(Component.java:6298)
at java.awt.Container.processEvent(Container.java:2236)
at java.awt.Component.dispatchEventImpl(Component.java:4889)
at java.awt.Container.dispatchEventImpl(Container.java:2294)
at java.awt.Component.dispatchEvent(Component.java:4711)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4888)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4522)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4466)
at java.awt.Container.dispatchEventImpl(Container.java:2280)
at java.awt.Window.dispatchEventImpl(Window.java:2746)
at java.awt.Component.dispatchEvent(Component.java:4711)
at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:758)
at java.awt.EventQueue.access$500(EventQueue.java:97)
at java.awt.EventQueue$3.run(EventQueue.java:709)
at java.awt.EventQueue$3.run(EventQueue.java:703)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.ProtectionDomain$JavaSecurityAccessImpl.doIntersectionPrivilege(ProtectionDomain.java:76)
at java.security.ProtectionDomain$JavaSecurityAccessImpl.doIntersectionPrivilege(ProtectionDomain.java:86)
at java.awt.EventQueue$4.run(EventQueue.java:731)
at java.awt.EventQueue$4.run(EventQueue.java:729)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.ProtectionDomain$JavaSecurityAccessImpl.doIntersectionPrivilege(ProtectionDomain.java:76)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:728)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:201)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:116)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:105)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:101)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:93)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:82)
|
|
|
|
NEVER CHANGE YOUR API KEY
Or you won't be able to use CAT.
I know there's a problem on poloniex. Hope they'll be able to solve.
Your API Key should not have the withdraw option activated, so no risk for you.
Maybe, I am wrong, but it has a trading ability. Somebody could trade on my expenses to his crap coin! I think we should find another mechanism that allows us to change the keys by our own. E.g., to have an account with you, and get there a key, which only fits to exchanges we paid for. Make a CAT key pair for each user. In each version you just give in the keys and allowed exchanges for that key. Then we can use our own keys as we need to. |
|
|
|
Yes, I am sure, because I started the program just now.
I am asking if there is a function within C.A.T. to cancel that order that might have been left over, from an unclean shutdown of the program/computer.
yes, open the market where funds seems to be held. Then, just for curiosity, open market explorer and load data, you will probably see one order into MyOrders Tab. then from the SingleMarket Toolbar -> Market Actions -> Delete Orders -> Delete All Orders (Current Market + OnlySite) I followed that, but all I can see in the Log is: 2016-12-11 00:20:04| PPE : User Action Added : Delete All Orders (Current Market+OnlySite) 2016-12-11 00:20:04| REQ : Process Pending User Action Delete All Orders (Current Market+OnlySite) 2016-12-11 00:20:04| REQ : No C.A.T. Orders for Action Delete All Orders (Current Market+OnlySite) 2016-12-11 00:20:04| REQ : Delete Only-Exchange BURST/BTC Orders. That might be because the Status is stop, but with process start I get only Status Zombi. |
|
|
|
|
Yes, I am sure, because I started the program just now.
I am asking if there is a function within C.A.T. to cancel that order that might have been left over, from an unclean shutdown of the program/computer.
|
|
|
|
On Bitrex my balance for one coin looks like that: Coin 287.94074362 809.05001654 0.00021020 0.00059061 However, I do not have any ping/trade window open for that coin. How can I free my Held coins  |
|
|
|
0.2% + 0.2% of your total amount.
if I bought total 1 BTC with this list 0.3@700 0.2@702 0.4@705 0.1@706 is it....0.2% of 1 BTC = 0.002 BTC or 0.2% of 0.3x$700 = $ 0.42 0.2% of 0.2x$702 = $ 0.2808 0.2% of 0.4x$705 = $ 0.564 0.2% of 0.1x$706 = $ 0.1412 total--------------- = $ 1.406 Depends if you want to calculate it in BTC or in US$. |
|
|
|
Burst is proven as a very efficient crypto currency but when cloud mining comes into play... Today I introduce you to the first Burst Cloud Mining Pool, aimed twords cloud miners or those with small HDD space. Please come mine some Burst with us. Burst Cloud Miners: http://216.165.179.42:5080/ Make sure to use port 5080. Congrats for the new pool! I have several TB of cloud storage but unfortunately my upload speed is very terrible, cannot upload the plotted file. I wish there is a cloud plotter too  dcct miner and plotter tool for Linux |
|
|
|
Can you please explain me the last line of Gains: 2016-10-23 15:32:14 SELL 0.01564997 0.37648123 0.00000014 BUY 0.01555607 0.37780685 0.00001470 0.00001484 0.00002062 0.600 0.00097939
2016-10-23 20:02:22 SELL 0.01564645 0.41103657 0.00000000 BUY 0.01555257 0.00001166 0.00000001 0.00000001 -0.00000001 0.600 0.00097938
The gain is +0.600%, but the gain value is -0.00000001 |
|
|
|
|
I got it now to work that the JSON data are inserted into a database.
Would it be possible to do the same for the balance page (only if a positive balance is available)?
Currency, Qty, HeldForOrders, Total (In BTC), Total Held(In...), Estimated Portfolio Value
Would be nice, if all exchanges could have the same fields. Why Poloniex has only 3 fields?
What stands the three dots for in Total Held(In...) ?
The Balance page is not re-sizeable on my screen.
|
|
|
|
Sampey, could you explain "Try to Stay Alone on Top Orders Book" in more detail please?
It means that (if possible) CAT will calculate your price with 1 minimum market unit (that could be 0.0000001 or 0.001 it depends by the exchange and market limits) +/- the best market price. So you will stay ALONE on top. Without this option activated you will stay on top BUT with other users orders. Sorry, I don't understand. Let's say I set minimum % gain to (a ridiculous) 10%. What would the "Try to Stay Alone on Top Orders Book" function accomplish? Let's say I set minimum % gain to 0.5%. What would it accomplish then? If a ping pong is calculated, it looks at the current others to find the price. It finds a price and it uses that. Then other traders also find a price and settle for that. If stay alone on top is ticked, then C.A.T. will recalucalete the price at the next round and put the price on top, so that you are sure the next one to be taken in the trading queue. The problem with that is, that you might not reach the 0.6% gain with it. Not sure what C.A.T. is doing, I believe it stucks there. Another problem is, as another user noted, that if you are on top, one Satoshi would be enough. If the 2., 3. ... cancel, then C.A.T. could find the top at another price. This user reported that C.A.T. stays on top and makes lets a hole to the 2nd trader. I was suggested to untick that. The result is that your price stalls. you will find yourself then over the time on place 10 or whatever, clearly not anymore close to trade. Howerver, it showed me, if you have a trading pair, that is stable (goes up and down) then after a few days you are on top again and the profit is still coming. |
|
|
|
|
Some people are really very in need of BURSTs. They not even stop to create a new BURST account, to beg for seed money (faucets).
Have a look at this final receiver:
BURST-R8SQ-TUEM-DTHQ-7ATA3
Collected already 673,576,045 BURSTs and needs still 5 or 10 BURSTs as donation ...
I would not work for such a low hourly rate, ...
|
|
|
|
I am selling my license. As I am lacking an assistant who does all that fancy finance stuff for me, this program is earning me 0 (zero) btc.
I checked how many times you asked here, and found never before! It seems therefore that you could really need somebody who can serve you, read your mind, and maybe change your diapers too. Try playing lottery, its easier to understand. Hey, I didn't lose anything either except the costs for my electricity. Anyway... I didn't know what to ask for. And reading through 125 Pages? Who has the time? You found now the time to write something. Why would you need to read through 125 pages? it says very clear you should read the manual. Is that too much? Start here: https://bitcointalk.org/index.php?topic=507103.msg5590896#msg5590896If you have problems to understand this, then ask specific. We are all glad to help. In the 125 pages it was said several times, that C.A.T. is a TOOL, not an ATM. You must know what you want to achieve. You need to watch the exchange(s) if that is possible. E.g. if you want to trade x/y then this trading pair must be on the exchange obviously, but if there are no trades at all, then your outcome is naturally zero. You need to understand that C.A.T. is a Ping-Pong trading to achieve the gain of 0.6% or whatever you have set. If the coin value is permanently falling, then never a pong will happen and you will gradually lose all. As some member made it clear to me, you will need to use some pairs that do have trades, they do have ups and downs and so it will happen. If you want a predictable trading tool, then you might want Butterbot, which only trades with BTC, but it remembers the past and calculates a possible future with EMAxx - but that is not C.A.T. Don't be fooled with the possibility of trading. Like when I looked at Etherium once: Every 40 second a trade, every 80 seconds a gain of 0.6%, .... you will be rich in a month! Get a cup of coffee (or beer) and think what you want, how that could be achieved and set your C.A.T. accordingly. Watch it to see if YOUR prediction is correct. Change if it doesn't. |
|
|
|
|
Sampey, for better reading the large data, it would be nice if you could alternate the colors of each row. I must scroll left and right to see all data. Thereby I easily slip into the next line.
A extra plus would be if the first two columns (time stamp and Market in Global gain) could stay.
I still feel that the balnce is not correct, and displays different on Poloniex then on other exchanges.
|
|
|
|
The JSON starts after the "=" sign.
Exactly, first you must extract the DATA value, then parse it as JSON. Yes, that is a WORKAROUND. The correct way is to do what you said: IT'S A JSON!!! While you already removing this nonsense string before and including "=" please add the Exchange name to it. Thank you very much. I am sure you can do that in less then 5 minutes. Thank you again! I can add the Exchange name in 5 minutes but i'm not sure i can remove the "data=" , i will check for it. What kind of problem did you get to first extract the data token from the HTTP Call and then parse it as Json? If you don't get any problem there's no need to change that http call The problem is that I did not get information what I can expect to receive. Your comment was only a JSON array. Therefore I build up everything for a JSON array, but it isn't. So, I got nothing. I "expode" the parts with the = sign and get so in the second half the JSON, which I can now use. To add the exchange would be great. I add all the received data into a database which I can use for some graphical analyzes. |
|
|
|
|
Show Posts
