Hi guys I'm trying to connect MPH via ccminer but every algo except equihash gives me an error stratum autentication failed. My bat file is speified for 8 algos, they are also set in hub workers page. Here's my bat file, username and workersname are the same as in pool account
:start ccminer -r 0 -a cryptonight -o stratum+tcp://europe.cryptonight-hub.miningpoolhub.com:12024 -u rdc01.1 -p x ccminer -r 0 -a groestl -o stratum+tcp://hub.miningpoolhub.com:12004 -u rdc01.1 -p x ccminer -r 0 -a myr-gr -o stratum+tcp://hub.miningpoolhub.com:12005 -u rdc01.1 -p x ccminer -r 0 -a neoscrypt -o stratum+tcp://hub.miningpoolhub.com:12012 -u rdc01.1 -p x ccminer -r 0 -a skein -o stratum+tcp://hub.miningpoolhub.com:12016 -u rdc01.1 -p x ccminer -r 0 -a lyra2v2 -o stratum+tcp://hub.miningpoolhub.com:12018 -u rdc01.1 -p x ccminer -r 0 -a equihash -o stratum+tcp://europe.equihash-hub.miningpoolhub.com:12023 -u rdc01.1 -p x ccminer -r 0 -a ethash -o stratum+tcp://europe.ethash-hub.miningpoolhub.com:12020 -u rdc01.1 -p x timeout 1 goto start
What am i doing wrong?
That's what's supposed to happen.
|
|
|
so i set the donate to 0 and i noticed its still mining on someone elses username.. :/
Bin\CryptoNight-Claymore\NsGpuCNMiner.exe -r -1 -mport 13333 -xpool stratum+ssl://us-east.cryptonight-hub.miningpoolhub.com:20580 -xwal aaronsace.multipoolminer -xpsw x Bin\CryptoNight-Claymore\NsGpuCNMiner.exe -r -1 -mport 13333 -xpool stratum+ssl://us-east.cryptonight-hub.miningpoolhub.com:20580 -xwal fonyo.multipoolminer -xpsw x
how do i completly turn off the donation thing..
Minimum is 10 minutes. Feel free to hack the code in notepad if you feel we deserve nothing.
|
|
|
Aaronsace, could you please let me know how much time of 24 hours of mining goes for donation purposes ? I don't mind it at all, but just would like to know that.
Also, are these the only algos available on MPH atm: cryptonight,decred,ethash,equihash,groestl,lbry,lyra2z,neoscrypt,pascal,sia,sib (defauls taken from mininpoolhub.bat) ?
10 minutes per day. Supported algorithms are listed on the homepage: https://miningpoolhub.com/
|
|
|
for multipoolminer ther eis something really not good why wtf the miner restart each x minutes with the same miner ?? ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) it s not even switching just restart the same one over and over again Status : Running Speed Active Launched Command ----- ------ -------- ------- {42,13 MH/s, 1,26 GH/s} 00 Days 00 Hours 48 Minutes 27 Times Bin\Ethash-Claymore\EthDcrMiner64.exe -r -1 -mport 13333 -epool europe.ethash-hub.miningpoolhub.com:17020 -ewal carlo0000.rx-560x4 -epsw x -esm 3 -allpools 1 -allcoins 1 -dpool hub.miningpoolhub.com:17022 -dwal carlo0000.rx-560x4 -dpsw x -dcoin sc -dcri 30 -platform 1 27 time it the same one already and less than a day 0,00 PH/s 00 Days 00 Hours 58 Minutes 44 Times Bin\Ethash-Claymore\EthDcrMiner64.exe -r -1 -mport 23333 -epool europe.ethash-hub.miningpoolhub.com:17020 -ewal carlo0000.gtx1060x5 -epsw x -esm 3 -allpools 1 -allcoins 1 -dpool hub.miningpoolhub.com:17022 -dwal carlo0000.gtx1060x5 -dpsw x -dcoin sc -dcri 200 -platform 2 really ? 44 times wtf so much time lose in restarting the miner 0,00 PH/s 00 Days 02 Hours 04 Minutes 96 Times Bin\Ethash-Claymore\EthDcrMiner64.exe -r -1 -mport 23333 -epool europe.ethash-hub.miningpoolhub.com:20535 -ewal carlo0000.gtx1070x4 -epsw x -esm 3 -allpools 1 -allcoins 1 -dpool europe.hub.miningpoolhub.com:20550 -dwal carlo0000.gtx1070x4 -dpsw x -dcoin sc -dcri 400 -platform 2 96 time here more i look and worse it gets Enable watchdog if not already. Please be posting bug reports here with full logs and command line: https://github.com/aaronsace/MultiPoolMiner/issues
|
|
|
Thanks again. So to stay off those pools i will just use mph algos. My rig isn't fast enough to get paid very often on those pools for the few times it switches. I'll have small amounts stuck there forever heh
Ye, unless you get to 0.0025 BTC.
|
|
|
So, is that a yes? Sorry, its kind of confusing... Will I get payments from zpool and hashrefinery separately? Do i need to sign up there and configure? How does one track those ones?
EDIT: My bat looks like this..
setx GPU_FORCE_64BIT_PTR 1 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100
powershell -version 5.0 -noexit -executionpolicy bypass -windowstyle maximized -command "&.\multipoolminer.ps1 -wallet 1KXVU2RaUsCoHPn4jN2FMFd99cDjCNw3QG -username SuperDerpBro -workername JunkMiner -region US -currency btc,cad -type nvidia -poolname miningpoolhub -algorithm Nist5,scrypt,Keccak,skunk,x11,Lbry,cryptonight,equihash,Lyra2RE2,neoscrypt -donate 10 -watchdog"
EDIT: To make it miningpoolhub only just copy the algos in the Start-MiningPoolHub.bat?
You can check out the websites; they are anonymous pools so you don't need a login and just goes to your BTC address. This is the full list of algorithms that MiningPoolHub supports: https://miningpoolhub.com/
|
|
|
Is there a big lag between the MultiPoolMiner and the Mining Pool Hubs shown credited BTC? Seems to be much less than MultiPoolMiner predicts (and what i was making on GehHash).
MultiPoolMiner uses the standard calculations that everyone uses. You will get your real earnings in the BTC pool but will take a few days to get an accurate figure. https://miningpoolhub.com/?page=account&action=autoexchangeZpool is included by default as well. Hmm. Looks like it is using zpool and hashrefinery. I didn't put those in my start up bat (I used -poolname miningpoolhub), should i? So is what your saying that when its mining those pool's i didn't select algorithms.. that is not counted and/or added to what i'm credited in BTC? I will just get payments from zpool and hashrefinery separately? How do you track those ones? There is a sample bat file included for MiningPoolHub only; notice that specific algorithms have been selected. They are completely different pools with their own websites. None of the pools supports every algorithm.
|
|
|
How does auto exchange work when we don't see value of those coins. There is a list of coin for auto exchange with list of exchanges but there is no info what are those X and what 0. You turn it on but you have no idea which exchange it will be used or which prices... Can someone please clarify this?
You don't need to see things for it to work. If you are a trader who wants to know all the exchange rates then turn auto exchange off and send it to an exchange yourself. The three exchanges: https://miningpoolhub.com/?page=account&action=autoexchangeYeah but what does that mean that we can get something for $1 USD instead of $10 or $100? when we don't know any rates you do exchanges from, why would people use this service? When we don't know any rates you can give us any rate you like... how that isn't strange? Also if you have 3 available exchange markets, from which you are taking rates? It is too much things unclear here... I'm not sure what's not clear; have you never used an exchange before? Pools don't pay miners rates; they just distribute what we find fairly amongst the 'pool' of miners.
|
|
|
Just curious if MPH is planning on adding Electroneum to available coins to mine? Sorry if this has been asked before. I would look through the thread but it's 200+ pages and it won't let me display them all then ctrl+f to find it.
The three exchanges (Bittrex, Yobit and Poloniex) don't support it yet: I wonder if there is eletroneum, then it can be algo switch mining with monero.
It would be possible if bittrex lists electroneum too. Currently miningpoolhub doesn't support cryptopia.
|
|
|
Hey, I'm a NiceHash "victim" and I'm trying to use MiningPoolHub.What wallet should I use?I'm currently using BitPay wallet, and I've read somewhere that this is not supported by miningpoolhub, am I wrong?
All standard Bitcoin addresses work. BitPay and Coinbase work plus many more. Wait. Does it only work with standard Bitcoin addresses or do the new segwit Bitcoin addresses work as well? I may need to switch mine before payout. Not sure... best change it as you may lose your pay-out.
|
|
|
What is this Ahashpool and why MPM is mining on it ? I'm only using MultiPoolHub. It's already happened couple of times.
Backup pools are located in the folder called 'pools'; add/remove at will. BTW, you haven't selected algorithms that MiningPoolHub doesn't support, have you? Cryptonight Equihash Ethash Groestl Keccak Lyra2RE2 Lyra2z Myriad-Groestl NeoScrypt Qubit Scrypt Sia Skein X11 Yescrypt
|
|
|
Is there a big lag between the MultiPoolMiner and the Mining Pool Hubs shown credited BTC? Seems to be much less than MultiPoolMiner predicts (and what i was making on GehHash).
MultiPoolMiner uses the standard calculations that everyone uses. You will get your real earnings in the BTC pool but will take a few days to get an accurate figure. https://miningpoolhub.com/?page=account&action=autoexchangeZpool is included by default as well.
|
|
|
Hey, I'm a NiceHash "victim" and I'm trying to use MiningPoolHub.What wallet should I use?I'm currently using BitPay wallet, and I've read somewhere that this is not supported by miningpoolhub, am I wrong?
All standard Bitcoin addresses work. BitPay and Coinbase work plus many more. i have a few more questions if you guys don't mind. Couldn't understand yet the payment system, the altcoins are auto-exchanged in bitcoin (in my case) automatically?Then converted and transferred to my wallet?If yes, when is the transfer made? And another question, how can i check my daily income and my btc income? thx and sorry for the newb questions Set auto exchange to Bitcoin so the pool will send everything to one of the three exchanges then it will arrive in the Bitcoin pool when when it comes back. Once your Bitcoin withdrawal threshold is meant then it will send it to your Bitcoin wallet. Auto exchange: https://miningpoolhub.com/?page=account&action=autoexchangePool wallet: https://bitcoin.miningpoolhub.com/index.php?page=account&action=pooleditDaily income: https://bitcoin.miningpoolhub.com/index.php?page=dashboardthanks for the info, at the moment in my dashboard the hashrate is 0 poolhashrate also 0, only the nethashrate is showing info.Basically i just started mph a few hours ago..it might be because of that? Everything takes hours; you'll get a good picture after a few days. For more real-time monitoring, you would have to look at each pool but you won't get a BTC figure.
|
|
|
aaronsace - after almost 15 hours of mining your tool closed excavator, and then after +-30s later it launched it again. What is the sense of it? https://i.imgur.com/bkUgPqY.pngAnd what does it mean that MultiPoolMiner is faster than excavator? I though that MultiPoolMiner is switcher between algorithms and miners like ccminer, excavator ewbf or dstm. On miners folder I don't see any info of it too. Also I've "-currency btc,usd" in start.bat but I don't see estimated earnings in usd. I saw usd currency only when I got information about faster miner, but then it disappeared. You only have one miner, one algorithm and one pool so it's not really the norm; the way it outputs probably needs tweaking a little. I'd be interested to see the log files if you post it over here: https://github.com/aaronsace/MultiPoolMiner/issues
|
|
|
Hey, I'm a NiceHash "victim" and I'm trying to use MiningPoolHub.What wallet should I use?I'm currently using BitPay wallet, and I've read somewhere that this is not supported by miningpoolhub, am I wrong?
All standard Bitcoin addresses work. BitPay and Coinbase work plus many more. i have a few more questions if you guys don't mind. Couldn't understand yet the payment system, the altcoins are auto-exchanged in bitcoin (in my case) automatically?Then converted and transferred to my wallet?If yes, when is the transfer made? And another question, how can i check my daily income and my btc income? thx and sorry for the newb questions Set auto exchange to Bitcoin so the pool will send everything to one of the three exchanges then it will arrive in the Bitcoin pool when when it comes back. Once your Bitcoin withdrawal threshold is meant then it will send it to your Bitcoin wallet. Auto exchange: https://miningpoolhub.com/?page=account&action=autoexchangePool wallet: https://bitcoin.miningpoolhub.com/index.php?page=account&action=pooleditDaily income: https://bitcoin.miningpoolhub.com/index.php?page=dashboard
|
|
|
Hey, I'm a NiceHash "victim" and I'm trying to use MiningPoolHub.What wallet should I use?I'm currently using BitPay wallet, and I've read somewhere that this is not supported by miningpoolhub, am I wrong?
All standard Bitcoin addresses work. BitPay and Coinbase work plus many more.
|
|
|
on multipoolminer i always have
AVERTISSEMENT : Pool prices are out of sync.
Once MiningPoolHub fixes the 30-minute caching problem then that warning will go.
|
|
|
Anyone else unable to access the Antpool dashboard? I keep getting "HTTP Status 403 - Ticket not recognized" when I try to login.
Not related to MiningPoolHub, try a different forum.
|
|
|
Hi, is there any way to exchange bitcoin for other alt-coins on this site? I have about 10 dollars in bitcoin and was wondering if I could autoexchange it for another cryptocurrency (namely litecoin) but unlike every other currency there is no autoexchange on the wallet page.
Just remember to set the auto exchange to Litecoin in future. Only can cash out the Bitcoin that you have in there.
|
|
|
|