|
Well, Ahash version major bug fix, Devfee Fix will be released shortly, No one told me that AMD benchmarking was not working for ahash.
|
|
|
|
|
NO. On zpool why do you switch he refills LTC daily. also there is not way for the api to check and see if anything is short.
First release will require you BTC address to be used as it will switch between zpool, ahash, and hashrefindery which at least 1 of those requires BTC as the payout coin. this is just step 1 of the multi switching version.
|
|
|
|
|
We are getting closer to the release of the multi pool version and should have it out within a week or 2 assuming we do not run into any more issues.
|
|
|
|
|
zpoolminer API has disabled Phi once again due to stratum issues it will recheck in 3 hours.
Phi returned.
|
|
|
|
what exactly do the lower temp and upper temp controls do?
If the temps go high or low and you have Temp Monitoring on and a speaker connected to the system it will beep if temps go to high or to low. Temps being low would tell you if a card stopped hashing or if a miner hung. High temps are to let you know a card is overheating. |
|
|
|
|
Phi has been up and down, I have my API monitoring for vardiff issues and if the pool is not adjusting correctly it will disable the algo.
|
|
|
|
could you remind me how I switch to ltc payout? Do i just change the btc wallet to my ltc wallet, and worker name from "c=BTC,worker1" to "c=LTC,worker1" ?
Correct. |
|
|
|
|
zpoolminer Notice:
I have set PHI profitability to 0 in my API as the Stratum is once again not setting the correct VARDIFF costing us about 90% of our estimated earnings.
Update 1 hr later PHI is re-enabled for now but I am watching for vardiff instability.
After 24 hrs of testing the AMD Adrenalin Edition 18.2.1 drivers appear to be working correctly with all our versions of Sgminer however the are not liked by claymores equihash miner.
|
|
|
|
|
Not at the current time, in time I plan to have the program be a all in one type system. Just have to be patent as all good things take time.
|
|
|
|
What's next
Well we are thinking to combine the ahash version and zpool versions allowing us easier integration for future pools.
as to other features well you will just have to wait and see.
add more support there pool.hashrefinery.com at the moment these three pools are the most popular, and if you still make the cards themselves choose a pool on which they are currently more profitable, it would be cool Currently each card will mine the most profitable algo already. Planning over the next few releases is adding the following pools to a selection box Nicehash, zPool, Ahashpool, MPH, Hashrefinery but this will get done after we make the program able to handle multiple pools from a single application. Then we plan to implement the ability to auto pool switch on top of the auto profit switching. |
|
|
|
|
What's next
Well we are thinking to combine the ahash version and zpool versions allowing us easier integration for future pools.
as to other features well you will just have to wait and see.
|
|
|
|
I like the idea of this app. How do the payouts compare to NiceHash and what is listed on whattomine.com?
I am earning 30-40% more than I would on nicehash from my experience. This is good your open and honest about the fee and what you make than are willing to lower those fees as more ppl use you miner ppl get pissed at claymore cause he's bank thousands than is unwilling to lower his fee as the updates trickle to nothing Yea some people start seeing the $ flow and it takes them over. I just brought on a 2nd developer as it was to much for me but we both agree that a fee reduction at $100 per day is still fair.
Update Notice:We are in the final testing phase for 1.9.0.5 now this version will include many bug fixes and additions including: Fixing how mining the devfee is handled - Fixing getting stuck mining the devfee which started happening after the additions of CPU mining GPU temp stats and Monitoring with audible beep alert if a GPU temp is out of range. On screen notice of if mining for the user or the developer And a few other small tweaks in the coding. |
|
|
|
|
ATTENTION:
We have a miner stuck in the devfee again username is set to "Rose".
We are testing a possible fix for this now and will do our best to have the problems with getting stuck in the devfee fixed in the next 48 hours.
|
|
|
|
This is really awesome. Thank you for such a great miner for the newbie (me!)
Would it be possible to include multipool support in the one application?
For example, at the moment I have found that the most profitable cpu mining for me is crptonight. I assume thats not included your miner because zpool doesn't support that coin?
Is that something that could be done in the future - where you could specify which device (cpu/gpu) mines to which pool?
That could also facilitate some testing if you could direct devices to pools individually without the need for multiple rigs.
We are only about a month and a half into the project. Adding multipool management is in the plans we have just not gotten there yet. Thanks for the reply, that's fantastic. Your miner I think is the 4th i have come across since I started just under a month ago and by far the most user friendly for myself. I was only wondering if it's possible since im not very programming technical at all and I would still be using your program for my gpus even if it wasn't. A big thanks. As your software has: 1. made me money 2. allowed me to spend more of my time learning more about crypto and everything else that goes with them, and less time tinkering with the mining as your program just works and i can comfortably set it and forget it. Also, would you have any suggestion for any of the settings included? I have pretty much left them all stock apart from showing the mining window and enabling the P0 state as your tooltip advised it could potentially improve performance. I have 2 pc's at the moment - 1 with a 1080ti and 1 with a 1070. Once again, thank you for the program and for any advice you may have. Currently the default settings are pretty good, One thing to try since you do not have more than 4 cards in a system is to enable the unchecked miners in the benchmarking page as alexis works best with less than 4 cards per system. And you can create the same for the pool.hashrefinery.com ?
One of the next things in our list is combining our versions into one miner making pool selection possible along with the ability to save different payout coins as a option for pools that support it. |
|
|
|
This is really awesome. Thank you for such a great miner for the newbie (me!)
Would it be possible to include multipool support in the one application?
For example, at the moment I have found that the most profitable cpu mining for me is crptonight. I assume thats not included your miner because zpool doesn't support that coin?
Is that something that could be done in the future - where you could specify which device (cpu/gpu) mines to which pool?
That could also facilitate some testing if you could direct devices to pools individually without the need for multiple rigs.
We are only about a month and a half into the project. Adding multipool management is in the plans we have just not gotten there yet. |
|
|
|
Little preview of what is coming.  |
|
|
|
Does the devfee counter take into account that the benchmarks are being mined on your account rather than ours also? If not, that adds up to significantly more than the advertised fee amount, especially when you actually set the timer for long enough to get actual decent readings from the various miners.
It does not, the only reason AMD cards mine to the dev fee is that was the chosen work around at the time for them not having a builtin benchmarking option. You are right it does slightly boost the dev fee but you do not have to re benchmark unless there is a major update in the miners such as switching to a different kernel which has been suggested for Xevan on AMD. I will make it so that by the time 1.9.1.0 is released that benchmarking for AMD goes to your wallet address instead of the devfee. |
|
|
|
Okay ive downloaded latest zpool version and started benchmarking on my machines. On one of my machines the new neoscrypt miner HSR gives me MSVCR120.dll error. Ive tried several times uninstalling and reinstalling this but no luck at all. Any suggestions, because as i see t his is maybe the most profitable right now to mine. Thx in advance. The machine ive got the problem is gtx 1070 with win 10 . Ive got 2 other machines with 1060 6gb with win 10 and my gaming pc with the same 1070 like my 1st rig and i dont have problem there. Edit - Okay as it seems that this particular rig i didnt turned windows deff off and the miner was not in the exceptions and defender deleted the miner .exe files. Now its benchmarking and will run smooth i think  Yea, that is the big problem with mining LOL things randomly get removed by AV's. Glad you got it sorted out. |
|
|
|
1.9.0.4 Release Link Zpool Miner: https://crypominer937.tk/Downloads/Releases/zPoolMiner_Setup_1.9.0.4.exeAhash version coming in a few days. not currently a high priority as very few people are using it. Notes. Did not have time to work on the benchmark copying script so take these steps before running the installer. 1. Copy your benchmark_GPU files from the configs folder 2. Install the new zPoolMiner 3. Run zPoolMiner and download all Bins. 4. Close zPoolMiner 5. Copy your saved benchmark_GPU files into the new configs folder overwriting the ones created by default Additions include: CPUmining Local api caching Debug Console improvements. |
|
|
|
|
Show Posts
