Bitfily has delivered their Snow Panther B1+, I have 2 running for a couple of days, they are performing as advertised so far. https://www.bitfily.io/Pictures, videos?
|
|
|
Low power is fine if it's more efficient, correct?
|
|
|
4500 rpm is under spec, you're db's will be lower but the temp in the unit will likely increase at 100% an speed.
Some cheap sound foam will still help if there is a lot of acoustic reflection. Just speculating at this point.
|
|
|
Steven has posted this very neat promotional video for the AvalonMiner 851 at the Canaan.io website. Direct link to the video: https://youtu.be/pJmJ4nFOiigThis is cool, If there's one for the 921/941 we'll have to post on our home page.
I mentioned the video looks like it's up on our home page. ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
Since power cost doesn't matter I'd just look at price per unit range you're looking at and efficiencies. I'd have to go back to on the thread but think of you racks how many units per line you can run will help you decide.
If you haven't gotten racks then your fine just figure out your unit model and count.
Also be careful of used units, not that others here are misleading you but a dud on a new venture is a unit that won't ROI.
|
|
|
Looking for thoughts on the federated union of exchanges using a tokenized sidechain of the Bitcoin network called Liquid.
|
|
|
T2T 25T is listed on their web now. Guess we'll change our phrasing now. ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
I think I broke my Z9 Mini.
The fan is not getting recognized anymore:
Oct 11 21:36:21 (none) local0.notice cgminer[1335]: No Fan find, check again Oct 11 21:36:22 (none) local0.notice cgminer[1335]: No Fan find, check again Oct 11 21:36:24 (none) local0.notice cgminer[1335]: No Fan find, check again Oct 11 21:36:25 (none) local0.notice cgminer[1335]: No Fan find, check again
I worked with a fan faker before the miner is not even responding when the original fan is attached.
Is there a work-around to disable the fan check or do I really have to send it in to bitmain?
You have more then one connector on the controllerboard for the fan! Have you tried other fan connector ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) any loose cables from fan? jiggle them little if bad connection in contact or cables. if nothing else perhaps you can buy controllerboard on ebay or somewhere else ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) good luck! Try another fan before looking a new board, the control board is kinda spendy unless your under warranty. Buying though would have you hashing sooner if needed.
|
|
|
Well a little ten year bourbon to bring some hash and a block our way.
|
|
|
I'm just checking the threads to see if anyone ordered this miner and knows if the end of October ship date is still on the table?
I'd like to see if they are meeting the first commitment before people start shelling out for their next announcement.
All batches are sold out, no shipping info for any B2's for our buyers yet.
|
|
|
Well it would just be for the node nothing else. 100 mb/s read is the spec I'm looking at, doesn't say what the write is though.
|
|
|
Is that a new canaan psu as well? 2k watts?
Also, whats the packing and sealing like? Standard Canaan with blue "tape" and foam?
|
|
|
Thank you for all the reply's. I'll be more specific.
I'm looking to run a node on a 256gb microSD A1 or above. Essentially I can swap this from phone to phone, tablet to tablet, etc easily and have in my opinion a full node in place of a light wallet?
Thoughts?
|
|
|
I don't know if or when but I could owe trump tax.
I think I beat the deadline one 1 unit by 1 day the t2turbo.
Checked your purchase, the T2T is safe from new tariffs by about 20 days but DHL didn't charge the 2.6%, which was returned to you being a solo buy. Rough estimate on that unit is about $40 in duties is all.
|
|
|
Is that a new canaan psu as well? 2k watts?
|
|
|
So far Innosilicon has sha256 asics as:
T2T+ / T2Ti / T2T / T2
Granted a lot of T2's but I think it has to do with using the same 10nm chip?
The T2Ti at efficiency setting looks really nice.
I don't think it's really that confusing but it is a lot. Only suggestion I would give is to have a more deliberate product life cycling. We have meeting today to look at our own listings and see what dead weight we can drop.
|
|
|
Okay this is confusing my t2turbo was purchased from you in August.
So will it do 20th at 1360 watts on efficiency setting
or will only the newer t2turbo do 20th at 1360 watts?
next questions is what does the newer model cost shipped to usa?
For the record my t2turbo from august does 19th at about 1600 watts
New model from what we understand. Not sure if prior models will have updates. Conservatively I'd say 20th at 1500w "ish" factoring +10% on the new unit. Our projections are conservative without getting into pumping our service.
|
|
|
Where are you seeing those details?
Our Innosilicion contact, we're looking for next T2T+ batch details and they gave a heads up on the release and pricing.
|
|
|
We may need separate thread for all the T2T models. Not sure what the new firmware is but their new T2Ti: BTW, We just released new BTC miner T2Ti with four operation modes: 25Tą5% 2000W+10% 23Tą5% 1880W+10% 21Tą5% 1550W+10% 20Tą5% 1360W+10%
Promotional price till Oct 15th
|
|
|
Just listed the new Innocilicon T2Ti with promotional pricing till Oct 15th.
US domestic buyers price is as listed on web for credit/paypal with customs service.
US coin buyers approx $1960 ish with customs service. Request a quote.
US Solo buyers can forgo customs service at their discretion and risk.
International buyers approx $152 w/o customs service.
|
|
|
|