RX5500XT - 21.9.1 driver
OpenCL 0.00 H/W 26.48 MH/s 26.47 MH/s 7/0/0 (100.00)
Thanks for testing. Run the ansicolors.reg script. can you move the file atiadlxx.dll out of the folder and try again? |
|
|
|
Congratulations,
finally a very competitive new miner.
Are you planning to add support for ZANO and ERGO?
THANK YOU
Not now. here is the todo list and ETA: 1. Fix known bugs and add an API. (1 week) 2. Faster opencl kernel (2 weeks) 3. Merge vertcoin code out of spminer and into tbminer exe. (3 weeks) |
|
|
|
Users ask for a step to step guide on how to upgrade NVIDIA drivers to the latest with cuda 11.4 support. If you have cuda 11.0 drivers, how to proceed? Please assist.  |
|
|
|
How do I mine vertcoin with this. what is algo setting?
./TBMiner --algo ??
thanks.
To mine vertcoin you use https://github.com/sp-hash/SPMiner/releasesTo mine VTC+ZIL you can see the example in the script. Spminer has a zilliqacoin switch wich will sleep in the zil POW. Tbminer support zil standalone mining
i tried integrating it also with hiveos and this just gives me headache
It's not that difficult once you have upgraded to the latest driver. I have asked in the hivos channel, perhaps they can assist you there.
A reply in the hiveos thread. If you are on an old image you need to upgrade https://bitcointalk.org/index.php?topic=2350786.2100
A couple of suggestions:
- cumulative average MH/s for current minig session
- cost / 24H would be nice addition
We are adding an readonly api, and this is the kind of information you can use other tools for once the api is done. But first more bugfixing, tuning and improvements.
Disregard the previous post. I updated to the latest Nvidia driver (471.12) and now it shows the Power Draw, Core Clock, and Memory Clock.  Good. The newest cards need the latest drivers. [moderator's note: consecutive posts merged] |
|
|
|
HP RTX 3080 OEM
--xintensity 7 works best for me (no stales)
(I assume Nicehash does not pay for stales.)
Yes there are optimal defaults for each pool. But --xintensity 7 is low. Other pools run fine with --xintensity 64 and ~100MHASH. I just like simplicity of Nicehash even if it means less profit. And TBM gives 3-5MHs more (with this setup) than other miners, great job :-) A good find. We might add optimized defaults to pools later. This setting is working good with zergpool as well.
Does it support CPU for VTC or I keep using the old miners ?
You can see in the VTC+ZIl script that it is using spminer. You need to copy the file into the folder if you want to mine VTC [moderator's note: consecutive posts merged] |
|
|
|
And this seems to be producing errors, that account in the eronous shares count
We have an issue on some pools that the miner disconnect after 30mins. If nicehash is directed to these pools, they will have the same problem. Will be fixed in v1.07. Affected pools are currently 2miners.com, woolypooly.com and nicehash.com. Switch to other pools while waiting for a fix. |
|
|
|
|
You also need to upgrade your driver to the latest
|
|
|
|
|
you need to give the script execute permission.
$chmod a+rx (filename)
|
|
|
|
cl-devices [0,1,2] etc has no effect. All found devices get used with no way to disable individual devices.
--cl-devices [0,1,2] is working here. You can also use the short-option -Y [0,1,2]. Don't use it with --amd-only or -U [,] or --cuda-devices [,]
HP RTX 3080 OEM
--xintensity 7 works best for me (no stales)
(I assume Nicehash does not pay for stales.)
Yes there are optimal defaults for each pool. But --xintensity 7 is low. Other pools run fine with --xintensity 64 and ~100MHASH. [moderator's note: consecutive posts merged] |
|
|
|
ok, if i find i will do a tutorial with screenshots so everyone can enjoy it
Perhaps later. Right now we need you test it and give us feedback so we can fix issues and improve the speed and features. 23 issues solved already on @github. This miner was written from scratch in around 6 months by a small team of opensource developers. The main goal of the project is to give you the fastest ethereum miner in the world on the new cards. AMD/NVIDIA This is a marathon, not a sprint.  |
|
|
|
yes, but not everyone knows the commands under linux
But the biggest miners in the world do. Invest some time to learn linux, or switch to windows. This is how you survive in the mining game long term. You need to squeeze out the last and most profitable percent. |
|
|
|
for the integration of tbm in hiveos, i received an official response from the hiveos team.
This miner was released 2 weeks ago and already mining on every major miningpool in the world. It has some issues, and the performance some cards and models are not optimal. We have added parameters that can boost performance, but a wrong configuration and pool can also reduce it. The miner is already mining on hiveos, but you need a little bit of linux knowledge to install it. With the right cards, config and pool, this miner can easily boost your profit +5%. Some of you have already switched, some of you might switch later. The most profitable miner will always win in the end... |
|
|
|
Vega 64 wants to draw lots of power to remain above 40mH/s... 220watts... Any lower Board limit you loose hashrate quickly. Not efficient at all for VEGA 64.
For the Vega you need to use the amdmemorytweak tool Core: 1062 Memory Mhz: 1080 Core undervolt: 850 amdmemorytweak --RAS 28 --RCDRD 12 --RCDWR 5 --RC 44 --RP 12 --RRDS 3 --RRDL 3 --FAW 12 --CWL 8 --WR 12 --REF 9750 --RFC 248 Should give around 48 MHASH-.
could we have a tutorial to run tbm on hiveos while waiting for its official integration
Thank you
There are some posts from users who run it on hiveos. 1. Ssh in, doesn't work from the flightsheet 2. Upgrade the driver to a cuda 11.4 compatible driver. You can check the driver with $Nvidia-driver-update --list 3. Download and unzip the TeamBlackMiner_1_06_Ubuntu_18_04_Cuda_11_4.zip 4. $ sudo apt install libcurl4-openssl-dev libapr1 little feedback, I don't know how you manage to get my rtx3070 to 63Mh? while gminer I have 61.40Mh with this same settings, after fault of pool "crazypool" not compatible I can not see if the shares are there So I'm on hiveOs, not easy the instllation, even with the links in the read-me, I think if you had an automation screen while waiting that could help a lot of people. I also had to put a dependency in addition I put you here sudo apt update
sudo apt install libapr1 libapr1-dev -y and for cuda 11.04: https://medium.com/@anarmammadli/how-to-install-cuda-11-4-on-ubuntu-18-04-or-20-04-63f3dee2099I did not succeed in integret in hiveos via flight-sheets I used nvidia-smi for my OCs because in the minor one cannot put the core and memory on nvidia on the page https://github.com/sp-hash/TeamBlackMinerit would be nice to put more details on the command line example: -p or --port => mining pool port (for example: '8888', '3333') A function is missing to generate the dag clean and then check it if there is no error. like at gminer, phoenixminer or trex which generates in slow mode and then checks no error now we have to fix the crash errors, so more stability and diff on pool is 8.590GLet's see more ... when it will be more stable and easier to deploy it, I will do a test on one of my farms + 2Ghs to see the sharing rate / hour Good continuations, with each update I will test and you will return |
|
|
|
Sadly the stats aren't working and this site doesn't support uploading images directly.
Upload the image to https://imgbb.com/ and copy the bbcode link into your post. You need recent adrenaline drivers to get stats. I testet on my rigs with a driver from 2021-4 and it works |
|
|
|
|
Can you take a screenshot please? Is the stats for mem, core, temp and watt working? What's the speed with ------xintensity 64
Add 32gb virtual memory if your rig is crashing at ethash but not on etchash
|
|
|
|
Is Ethermine.org supported and does that pool support stale shares?
Yes it is supported. An example .bat file is included . Not sure about the payout for stale shares. Cannot find anything in the faq. miningpoolhub.com pay 100% for stales, ezil.me pay 70%. Nanopool.org doesn't have any stale share statistics so I guess they pay 100% as well.. |
|
|
|
|
Show Posts
