Here is mine, it's working well. If you are not using Masternode delete everything after ### with them, and change 'staking=0' to 'staking=1' - you can add 'addnodes' after 'port'  rpcallowip=127.0.0.1
rpcuser=xxx
rpcpassword=yyy
staking=0
server=1
listen=1
port=2222
###
masternode=1
masternodeaddr=zz.zz.zzz.zzzz:wwww
masternodeprivkey=64Sxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Save it as coinonatx.conf file (when saving change extension from ~.txt to all types) |
|
|
|
Hey everyone,
Is it possible to mine a specific coin?
Let's say, CANN, I know it's x11, but I see no specific port for CANN anywhere, would the url be like cann-x11?
Thanks in advance
You can get paid in CANN by getting you cann address in -u parameter and c=CANN in -p, but when you connect to x11 port You'll mine whatever pool thinks is most profitable and your earnings will be then converted to CANN |
|
|
|
A lot of people are saying many small rigs but if you are mining for PROFIT, you should stick to 1 rig only. Why? Because it is more costly to have more rigs due to 1) the cost of buying parts (buying more ssds, psus, motherboards, etc) and 2) the increased electricity costs (paying for more power to more ssds, psus, motherboards, etc).
All that dislike for bigger rigs because its hard to maintain, driver issues, and all that is just whining. Nothing is free and if you want to succeed you really need to put in the effort and spend time tweaking, configuring, and monitoring your rigs.
Your points towards 1 big rig is inacccurate and cons for smaller rigs setup as sucked up from finger. 1. Windows will limit Your possibilities to 8 cards per driver (so 8 GPU max) 2. Cost of buying parts - this contention can't stand for itself because OP stated that he want to COMBINE more rigs into one -> he already have more than 1 3. Increased ele. cost - Really? If you are going multiraid configuration, using Ryzen and many meters of fancy leds - yea it could affect it. But those ~50W more for increased stability and possibilities it brings are nothing to count. Of course, making 3x 2card rigs is POINTLESS. That's loss you are talking about. But having 2x4 card or 1x8 card ... Well I'll be after 2x4 just because if something fails (and it certainly one day would) I wont be 2X profit in back, only 1 X  once again to all inclusive. I have spaces in a few offices with restrictions. as follows 1000 watts or less and fairly quiet. these offices provide me free power for ½ the coins. the rigs are fully paid for before I install them. so this one setup cost me 6 bucks a month for smos fees. so 360 - 420 a month - 6 = 354-414 ½ to the other guy that is 177 to 207 a month for me here look at this   Yeah, that statement was unfortunate, I didn't mean that it's completely pointless, but when it comes to space optimalization and equipment combining (with clean situation - you have space where you keep your rigs, number doesn't matter) it's pointless to split 6-8 cards into 3-4 rigs, because auxillary parts will cost you about 1 or 2 cards in total, bringing nothing that one 6-8 GPU rig couldn't do. |
|
|
|
you must send exactly a transaction of 50000 masternodecoin + fees, remember that to a new address. wait for the necessary confirmations, and then generate the private key. Can you show me with capture image how can i do this transcation of 50000 masternodecoin ? look, you can use this command in the terminal if you are in linux: 1. generate a new wallet ./Masternodecoind getnewaddress Masternode 2. to the generated wallet you will send the 50000 coins with the following order, that means that you should have 50002 in funds to pay the commissions of the transaction ./Masternodecoind sendtoaddress wallet 50000 (amount to be sent) 3. you wait for the confirmations and with the following order you show the ID of the transaction with a: 1 or a: 0 ./Masternodecoind masternode outputs so Transaction ID: 1 4. generate the key with the following command ./Masternodecoind masternode genkey the rest is to follow the tutorial that is in the post-main I'm on windows 7 64bits , how can i have or transfer 50002 in funds ? You can do the same in debug window in your windows-qt wallet without typing './Masternodecoind' first. Rest would stay the same, commends passed to shell in linux can be passed to debug window in wallet When i write ./Masternodecoind on console he show me this message Method not found (code -32601) how can i resolve that problem? As i wrote in my previous post - You should use everything from commands EXCEPT ./Masternodecoind How i resolve this problem ? boy you must send, a transaction of 50000 coins, the wallet will automatically use the remaining balance to pay the commissions How can i send 50000 coins ? and how can i have 50000 coins in my balance to make this transaction ? You do not know how to use the wallet in windows? is the easiest thing to do, you have to go to the send tab of the wallet, there are fields where you have to place the amount to send would be the 50000 and in the field of the address send, you put the new address that you have created and you send I really do not understand your question, tell me something when you have balance in your wallet? kid how can i make this transaction and send 50000 mtnci when i have 0 mtnc on balance ?! my question is how can i transfer 50000 mtnc to my balance ? Well... You need to buy it and send to Your wallet from exchange? Otherwise i really don't have idea what are you asking for... How much bitcoin caust 50000 mtnc if i want to buy it with bitcoin ? Here is only availble exchange ATM. Right now MN cost ~1.3BTC (on buy order side) WoooW 50000 MTNC cost 2.07864900 BTC is very very very high price i don't have it on my BTC wallet to make that transfer know you any other solution to config mtnc program and have TxHash and output index ? Well it's impossible without specified number of coins which you need to buy, stake or get from someone (most likely buy) I think it's very difficult to find someone who sell 50000 mtnc under than 2 or 1 bitcoin Yea, best bet is placing Buy order and wait for dumpers to fill it |
|
|
|
Sorry, I didn't realize that more info was needed. I use Windows 10x64. All 7 cards are detected and recognized, but DAG files are not able to be downloaded for all of them when 7 are plugged in. I have an EVGA 850P2. I use a 120G SSD and have an 8G stick of DDR2 RAM in slot 2. I also have a Pentium CPU.
Here is what happens: I plug 6 cards in and everything runs perfectly. I boot up with 7 cards and start claymore. As soon as it tries to download the DAG files, It spits out an error message for a random card. Sometimes the RX580 in slot one has a problem, sometimes it is the RX470 in slot 6.
Are your virtual memory is setted for at least 16GB? Im not sure exactly what you mean, but The total RAM I have is over 16GB, including that of the Cards Right-click your Windows icon on task bar -> select System -> from left panel pick Advanced System Settings -> On Properties box click Advanced tab -> Click Settings under performance section -> then on another prompt window go to Advanced -> Click Change and specifty at least 16 GB of HDD space for VM (it most likely won't be used but Windows need it sometimes). |
|
|
|
you must send exactly a transaction of 50000 masternodecoin + fees, remember that to a new address. wait for the necessary confirmations, and then generate the private key. Can you show me with capture image how can i do this transcation of 50000 masternodecoin ? look, you can use this command in the terminal if you are in linux: 1. generate a new wallet ./Masternodecoind getnewaddress Masternode 2. to the generated wallet you will send the 50000 coins with the following order, that means that you should have 50002 in funds to pay the commissions of the transaction ./Masternodecoind sendtoaddress wallet 50000 (amount to be sent) 3. you wait for the confirmations and with the following order you show the ID of the transaction with a: 1 or a: 0 ./Masternodecoind masternode outputs so Transaction ID: 1 4. generate the key with the following command ./Masternodecoind masternode genkey the rest is to follow the tutorial that is in the post-main I'm on windows 7 64bits , how can i have or transfer 50002 in funds ? You can do the same in debug window in your windows-qt wallet without typing './Masternodecoind' first. Rest would stay the same, commends passed to shell in linux can be passed to debug window in wallet When i write ./Masternodecoind on console he show me this message Method not found (code -32601) how can i resolve that problem? As i wrote in my previous post - You should use everything from commands EXCEPT ./Masternodecoind How i resolve this problem ? boy you must send, a transaction of 50000 coins, the wallet will automatically use the remaining balance to pay the commissions How can i send 50000 coins ? and how can i have 50000 coins in my balance to make this transaction ? You do not know how to use the wallet in windows? is the easiest thing to do, you have to go to the send tab of the wallet, there are fields where you have to place the amount to send would be the 50000 and in the field of the address send, you put the new address that you have created and you send I really do not understand your question, tell me something when you have balance in your wallet? kid how can i make this transaction and send 50000 mtnci when i have 0 mtnc on balance ?! my question is how can i transfer 50000 mtnc to my balance ? Well... You need to buy it and send to Your wallet from exchange? Otherwise i really don't have idea what are you asking for... How much bitcoin caust 50000 mtnc if i want to buy it with bitcoin ? Here is only availble exchange ATM. Right now MN cost ~1.3BTC (on buy order side) WoooW 50000 MTNC cost 2.07864900 BTC is very very very high price i don't have it on my BTC wallet to make that transfer know you any other solution to config mtnc program and have TxHash and output index ? Well it's impossible without specified number of coins which you need to buy, stake or get from someone (most likely buy) |
|
|
|
Sorry, I didn't realize that more info was needed. I use Windows 10x64. All 7 cards are detected and recognized, but DAG files are not able to be downloaded for all of them when 7 are plugged in. I have an EVGA 850P2. I use a 120G SSD and have an 8G stick of DDR2 RAM in slot 2. I also have a Pentium CPU.
Here is what happens: I plug 6 cards in and everything runs perfectly. I boot up with 7 cards and start claymore. As soon as it tries to download the DAG files, It spits out an error message for a random card. Sometimes the RX580 in slot one has a problem, sometimes it is the RX470 in slot 6.
Are your virtual memory is setted for at least 16GB? |
|
|
|
you must send exactly a transaction of 50000 masternodecoin + fees, remember that to a new address. wait for the necessary confirmations, and then generate the private key. Can you show me with capture image how can i do this transcation of 50000 masternodecoin ? look, you can use this command in the terminal if you are in linux: 1. generate a new wallet ./Masternodecoind getnewaddress Masternode 2. to the generated wallet you will send the 50000 coins with the following order, that means that you should have 50002 in funds to pay the commissions of the transaction ./Masternodecoind sendtoaddress wallet 50000 (amount to be sent) 3. you wait for the confirmations and with the following order you show the ID of the transaction with a: 1 or a: 0 ./Masternodecoind masternode outputs so Transaction ID: 1 4. generate the key with the following command ./Masternodecoind masternode genkey the rest is to follow the tutorial that is in the post-main I'm on windows 7 64bits , how can i have or transfer 50002 in funds ? You can do the same in debug window in your windows-qt wallet without typing './Masternodecoind' first. Rest would stay the same, commends passed to shell in linux can be passed to debug window in wallet When i write ./Masternodecoind on console he show me this message Method not found (code -32601) how can i resolve that problem? As i wrote in my previous post - You should use everything from commands EXCEPT ./Masternodecoind How i resolve this problem ? boy you must send, a transaction of 50000 coins, the wallet will automatically use the remaining balance to pay the commissions How can i send 50000 coins ? and how can i have 50000 coins in my balance to make this transaction ? You do not know how to use the wallet in windows? is the easiest thing to do, you have to go to the send tab of the wallet, there are fields where you have to place the amount to send would be the 50000 and in the field of the address send, you put the new address that you have created and you send I really do not understand your question, tell me something when you have balance in your wallet? kid how can i make this transaction and send 50000 mtnci when i have 0 mtnc on balance ?! my question is how can i transfer 50000 mtnc to my balance ? Well... You need to buy it and send to Your wallet from exchange? Otherwise i really don't have idea what are you asking for... How much bitcoin caust 50000 mtnc if i want to buy it with bitcoin ? Here is only availble exchange ATM. Right now MN cost ~1.3BTC (on buy order side) |
|
|
|
explain - who has the greatest chance of finding a block?
Well you need to make your question more precise. If You mean MN - it depends on many factors like ping/uptime/rank/last payment/etc. In PoS the best chances of finding block goes to one having larger, heaviest (most weight) tx in opened, stacking wallet. |
|
|
|
A lot of people are saying many small rigs but if you are mining for PROFIT, you should stick to 1 rig only. Why? Because it is more costly to have more rigs due to 1) the cost of buying parts (buying more ssds, psus, motherboards, etc) and 2) the increased electricity costs (paying for more power to more ssds, psus, motherboards, etc).
All that dislike for bigger rigs because its hard to maintain, driver issues, and all that is just whining. Nothing is free and if you want to succeed you really need to put in the effort and spend time tweaking, configuring, and monitoring your rigs.
Your points towards 1 big rig is inacccurate and cons for smaller rigs setup as sucked up from finger. 1. Windows will limit Your possibilities to 8 cards per driver (so 8 GPU max) 2. Cost of buying parts - this contention can't stand for itself because OP stated that he want to COMBINE more rigs into one -> he already have more than 1 3. Increased ele. cost - Really? If you are going multiraid configuration, using Ryzen and many meters of fancy leds - yea it could affect it. But those ~50W more for increased stability and possibilities it brings are nothing to count. Of course, making 3x 2card rigs is POINTLESS. That's loss you are talking about. But having 2x4 card or 1x8 card ... Well I'll be after 2x4 just because if something fails (and it certainly one day would) I wont be 2X profit in back, only 1 X |
|
|
|
you must send exactly a transaction of 50000 masternodecoin + fees, remember that to a new address. wait for the necessary confirmations, and then generate the private key. Can you show me with capture image how can i do this transcation of 50000 masternodecoin ? look, you can use this command in the terminal if you are in linux: 1. generate a new wallet ./Masternodecoind getnewaddress Masternode 2. to the generated wallet you will send the 50000 coins with the following order, that means that you should have 50002 in funds to pay the commissions of the transaction ./Masternodecoind sendtoaddress wallet 50000 (amount to be sent) 3. you wait for the confirmations and with the following order you show the ID of the transaction with a: 1 or a: 0 ./Masternodecoind masternode outputs so Transaction ID: 1 4. generate the key with the following command ./Masternodecoind masternode genkey the rest is to follow the tutorial that is in the post-main I'm on windows 7 64bits , how can i have or transfer 50002 in funds ? You can do the same in debug window in your windows-qt wallet without typing './Masternodecoind' first. Rest would stay the same, commends passed to shell in linux can be passed to debug window in wallet When i write ./Masternodecoind on console he show me this message Method not found (code -32601) how can i resolve that problem? As i wrote in my previous post - You should use everything from commands EXCEPT ./Masternodecoind How i resolve this problem ? boy you must send, a transaction of 50000 coins, the wallet will automatically use the remaining balance to pay the commissions How can i send 50000 coins ? and how can i have 50000 coins in my balance to make this transaction ? You do not know how to use the wallet in windows? is the easiest thing to do, you have to go to the send tab of the wallet, there are fields where you have to place the amount to send would be the 50000 and in the field of the address send, you put the new address that you have created and you send I really do not understand your question, tell me something when you have balance in your wallet? kid how can i make this transaction and send 50000 mtnci when i have 0 mtnc on balance ?! my question is how can i transfer 50000 mtnc to my balance ? Well... You need to buy it and send to Your wallet from exchange? Otherwise i really don't have idea what are you asking for... |
|
|
|
you must send exactly a transaction of 50000 masternodecoin + fees, remember that to a new address. wait for the necessary confirmations, and then generate the private key. Can you show me with capture image how can i do this transcation of 50000 masternodecoin ? look, you can use this command in the terminal if you are in linux: 1. generate a new wallet ./Masternodecoind getnewaddress Masternode 2. to the generated wallet you will send the 50000 coins with the following order, that means that you should have 50002 in funds to pay the commissions of the transaction ./Masternodecoind sendtoaddress wallet 50000 (amount to be sent) 3. you wait for the confirmations and with the following order you show the ID of the transaction with a: 1 or a: 0 ./Masternodecoind masternode outputs so Transaction ID: 1 4. generate the key with the following command ./Masternodecoind masternode genkey the rest is to follow the tutorial that is in the post-main I'm on windows 7 64bits , how can i have or transfer 50002 in funds ? You can do the same in debug window in your windows-qt wallet without typing './Masternodecoind' first. Rest would stay the same, commends passed to shell in linux can be passed to debug window in wallet When i write ./Masternodecoind on console he show me this message Method not found (code -32601) how can i resolve that problem? As i wrote in my previous post - You should use everything from commands EXCEPT ./Masternodecoind |
|
|
|
Hey guys,
I have a rig at home , so do some friends and we asked ourselves if it were in any way better to have one BIG mining rig by combining all of them rather than having separate rigs running.
Any experience with that?
to be noted: none of us are in a mining pool. This is just purely hardware related. Since I big rig would maybe have more power during the benchmark and hence make more money ?
Thanks for any suggestions and help !
It depends, when You're mining solo 1 big rig will probably be better because You can mine directly to local wallet without setting up fancy things. But hashrate won't change (1 big rig will have accumulated hashrate of 2 smaller), if it does it'll get worse because of driver's issues, more problems at troubleshooting (more hashrate at downtime if something goes wrong). |
|
|
|
What do you recommend as a minimum amount of coins in order to get a minimum / decent daily stacking? I am really struggling to get started with it!!! Please help!
For daily stacking you need to go with 1M+, otherwise You'll end up with stakes every other day or so on. The best amount would be as much as you can afford, to take compounding into account |
|
|
|
as i mentioned a few posts before i am working on an explorer
it seems to be working fine now but i will not publish it without devs permission
i have written a PM to the dev and waiting for his answer
good job , release it and we got 2nd explorer now. Masternodecoin Explorer based in Iquidus: http://mtnc.snodo.de:3001/If you find any bugs, please let me know so I can fix it. Just post in this thread (I am reading literaly every post here) or write a PM to me. @ideaupdater Don't forget to add it in in the OP of this thread. You can insert a link to this post, so if someone finds a bug they know what to do it seems that I have not caught a single block in a month (because I do not see a transaction worth 30 coins Do you have a masternode or is it staking? the balance in the wallet should be sufficient to know if you have generated coins or not I have a masternode. balance - more than 61,000 coins. What I'm not so tuned? Darksend round can? but I previously asked here darksend function is ok, but if you do not know it well ,please do not try it or you will lose your coin . why I see 24 mining coins. why 30 was not even once? Because 6 coins went to POS staker that found this block, Your 24 coins are part of those 30 coin block reward. You just share with POS. Or pos share with MN. anyway |
|
|
|
you must send exactly a transaction of 50000 masternodecoin + fees, remember that to a new address. wait for the necessary confirmations, and then generate the private key. Can you show me with capture image how can i do this transcation of 50000 masternodecoin ? look, you can use this command in the terminal if you are in linux: 1. generate a new wallet ./Masternodecoind getnewaddress Masternode 2. to the generated wallet you will send the 50000 coins with the following order, that means that you should have 50002 in funds to pay the commissions of the transaction ./Masternodecoind sendtoaddress wallet 50000 (amount to be sent) 3. you wait for the confirmations and with the following order you show the ID of the transaction with a: 1 or a: 0 ./Masternodecoind masternode outputs so Transaction ID: 1 4. generate the key with the following command ./Masternodecoind masternode genkey the rest is to follow the tutorial that is in the post-main I'm on windows 7 64bits , how can i have or transfer 50002 in funds ? You can do the same in debug window in your windows-qt wallet without typing './Masternodecoind' first. Rest would stay the same, commends passed to shell in linux can be passed to debug window in wallet |
|
|
|
on my Windows Wallet crashes constantly ! Every 5 seconds! I think that pools are not coins because the wallet freezes! Please Dev fix the wallet!
You should check if your antivirus or firewall is intruding in the software. If possible, please backup wallet.dat file and then delete entire coinonatx folder.
You can then install the coinonatx wallet and copy the wallet.dat file
-support teamIt's not like this for everybody. Yea, sometimes Antimalware Service Executable could spike high when wallet is scanning new blocks. BUT... That wallet utilizes too much CPU. I'm running Mnode and spikes are from 1-3%CPU usuage to 40-60% every 30-45 secs. That's keeping me from adding another MN's - not sure if my PC could cope with it. Just don't write it's low-end cpu issue. I'm sure that fx6300 isn't high-end at this time but wouldn't agree it's low-end either Wallet NEEDS optimalization, that spikes makes it impossible to: check MN status, browse transactions,etc without frustration  That 30sec window is certainly not enough  |
|
|
|
Run the Masternode for 3days now, but I still got nothing.
On average, I am receiving reward in every 4th day. The first time it is likely even longer. See my previous post about the reward frequency. I was thinking on getting more MN soon, anyone know how many of them could i run on Pi 3? Right now 1 runs perfect for days (one of most stable MN & Client I've tried so far) I just wondering if it could cope with 5 or should I run them on PC Thanks for advices |
|
|
|
How much coin do I get if im running masternode ?
~ 6 per day. It varies a lot, but 4-6/day is safe assumption. Thank you, gonna run some masternode soon. Take note that it varies a lot. As for example since last restart my MN has uptime of 2d ~17h, so far I've received 19 XCXT as reward. So it's now more than 6/day but rewards also has huge fluctuation (my rewards were ~:10,6,2,0.3,0.2). |
|
|
|
Hello, I wanted to compliment the 1337 community on their willingness to help a shareholder and amazing technical support. I had problems with the recent wallet upgrade from v1.8 to v1.9. I joined the Slack channel and met xenonflux who was both friendly and amazingly knowledgeable. Detailed instructions for the latest wallet upgrade are on the wallet page of the 1337 website, please see below. I will definitely be PoS minting and advocating this coin to other crypto investors who are looking for undervalued gaming exposure. Also, its possible to earn 1337 shares via the folding @ home program if you have spare computing power at your disposition. Hello everyone! Please update your 1337 wallet to version 1.9. Here are the links to get you started. 1337 Version 1.9 Wallet (Windows) https://github.com/xenonflux/1337/releases/download/v1.9.0.0/1337-qt9252017.zipNodes (To Connect): https://pastebin.com/8FM0YvASHere's the Snapshot (Faster Sync): https://github.com/xenonflux/1337/releases/download/v1.9.0.0/1337-snapshot9272017.zipHi! Is this a mandatory update? Thanks! Yeah it's. It's halving update, so if You're still on 1.8 your stakes could be not compatible with 1.9, also You cannot send funds between 1.8 and 1.9 |
|
|
|
|
Show Posts
