Can We Run this software portable on a old computer Core 2 Duo 2.8 GHZ 2GB Ram DDR2 OR NOT ? OR IT WILL BE VERY LESS EARNING ? AND ELECTRICITY COST WILL BE MORE ?
IF WE RUN THIS PORTABLE SOFTWARE ON CORE 2 DUO 2.8 GHZ 2GB RAM EVERY NIGHT FROM 9 PM TO NEXT DAY 9 AM MORNING WHEN COMPUTER IS NOT USED BY SOMEONE THAN WHAT WILL BE EARNING PER DAY ?
You will earn with this old CPU not very much. Maybe round about 5-10 Cents when you mine 24h a day. Use a GPU when you want to earn something or a good CPU like AMD Ryzen 7 1800.
|
|
|
Pls mister Claymore include RX 550 support (lexa) ; i have a lot of them and i get 420h/s with 9.7 i want more than maximum 10 gpu per sistem; and hopefully a little speed bump
420 whit a 550 UAL!!!! what model of yours 550 ? How do you get 420 H/s with your RX550? Mine runs just with ~300 H/s...
|
|
|
Looking very nice today =)
|
|
|
Really? What cards are doing 400? my 560s are doing 450, so with the reduced cost and wattage I'd be very very interested.
My RX550 with 2GB gives 420...430 h/s on " Gateless Gate" and on " STAK XMR". The key is " threads=2". With its price under $100 and ~75 Watt power, I think it's a good choice now. Claymore, please, bring back support of "Polaris 12", at least to the degree as of v9.7 ! My RX550 Rig needs 320W (hole system) with a hashrate about 1875h/s with standard drivers and without undervolting.
|
|
|
Sorry, I don't not support very old cards anymore.
How about very NEW? Still no support for Polaris_12 (RX 550) ? We need support for RX550. The card is not that old really.
|
|
|
How long does it take until you see the balance on your wallet?
If you do it alright, it‘s a matter of minutes I use the address from my wallet and the payout was about 8h ago and it still shows me balance just 0 🤔
|
|
|
How long does it take until you see the balance on your wallet?
|
|
|
How long does it take to confirm the reward to the wallet? It shows me since 8h just 0 =/
|
|
|
It seems like rx560 is quite good in performing cryptonote algorithm compared to other gpu with same pricing range.
I think the RX 550 is also quite good in performing XMR ... more than 400 h/s with less power consumption compared to the RX 560. is it true? as i know, rx 550 only do 200 h/s easly over 400 h/s I have a mining rig with 6x RX550 and the hole system runs with 1875 h/s and needs 340W (hole system)
|
|
|
@Claymore, Hi! Is it possible to add support for older cards? HD Series 69xx
v10 supports only ASM mode, so old cards are not supported, also RX550 is not supported currently. I can add non-ASM mode but it will work slowly, so it's better to use v9.7 for cards that are not supported by v10. It would be nice if the new version works with the RX550
|
|
|
I have the problem with my RX550 that the software: no asm binary found. Any solution?
|
|
|
Have anyone a sample config for nicehash? Thanks!
NsGpuCNMiner.exe -xpool stratum+ssl://cryptonight.eu.nicehash.com:33355 -xwal btc-addr.rig1 -xpsw x -h 928 -dmem 1 -cclock 1167 -cvddc 875 -mclock 2000 -mvddc 875 btc-addr - is yours nicehash btc address rig - is your rig name ( if you use it ) This is setup for 4GB vram card , if you have 8GB you can change -h 928 to -h 1800-1900 , just test it to find thah best fits to you , "-cclock 1167 -cvddc 875 -mclock 2000 -mvddc 875" - this is core and memory speed and voltage , edit it to fits for you or just delete it if you use other program to overclock/undervolt. Thanks! I hope now it will work fine.
|
|
|
Have anyone a sample config for nicehash? Thanks!
|
|
|
Looking to build a small hobby rig with 4 or 5 RX 550 cards. They dont need extra PCIe power connectors from the PSU, would i still need a 1000 watt+ PSU to run with 4 or 5 GPUs? Bonus being, rig would only need 1 PSU right?
My rig have 6x RX550 4GB and my PSU have just 650W. The hole system needs in CryptoNight 290-300W with 1880H/s and on Equihash with 62Mh/s about 500W. Everything is default on settings, no overclocking or undervolting. I hope it helps you. Best regards
|
|
|
XFX RX 550 4GB 315 h/s Stock Settings Claymore 9.7 -h 512 -A 4 Win 10 x64 AMD Crimson Relive 17.4.4 Motherboard Biostar TB85 with 4GB DDR3 HD Kingston 60GB SSD
I'm hobby mining and experimenting with low power cards.
So far it looks like these use 34W each at the settings above.
I know the motherboard with a Celeron with this video card idle draws 56 W at the wall measured with a Kill-A-Watt.
It measures 90 W at the wall with card at 315 h/s. So I assume 34 W per card at full load.
Just ordered 5 more of these and some powered risers to populate all six PCIE slots.
Getting 1875 h/s under 300W is ass kicking.
I will build it and report back.
~BCX~
Can you post the link to this graphic card you were talking about the XFX RX 550 4GB I just brought this XFX Radeon RX 550 My System Dell optiplex 9020 Windows 7 64 bit cpu i5-4670 3.0GHZ Ram 16 GB Software Claymore 9.7 XFX Radon RX 550 - 36 watts - 258 H/S With the Dell optiplex 9020 and XFX Radon RX 550 - 70 watts - 258 H/S My rig run with four rx550 4gb from sapphire with 1253H/s. Hole system needs about 230W, but I need to undervolt with wattman, actually I don't work really. In the next days i get two new cards for my hobby rig 🙂
|
|
|
I have 6x RX550 in my Rig. It run with 65 Mh/s on Ethereum and the hole System needs just 290W. I would say for your setup, take the RX560 and put down the Core Voltage like I did.
|
|
|
Did you try what your friend said? Did you work?
Yes I added other nodes that were near at my high but not working at all. I try it on an different PC, maybe it will work on it fine.
|
|
|
Is there may any Wallet where I can use with my wallet.dat without full sync? Now it load but in about 15h just 30MB and still saying unknown when finish...
|
|
|
I will try it and will see after work if it work. Thanks for the help until here =)
|
|
|
I am up to block 475924 and it said 4464 left until done. Connections are 0/8 as it was the hole time for me.
|
|
|
|