Both blocktrail and blockchain say its antpools now. How does an orphan happen after 20 minutes. Did antpool start building on its own chain with the intent on taking both blocks?
maybe just not updated? im seeing 3 confirms on pool website. |
|
|
|
Im selling what the customer wants, that is more mh for an acceptable price. No im not trying to sell here, just showing some work im proud of.
Offcourse you can undervolt to best mh/w ratio but thats not affordable to sell.
If by customer you mean NOOB, someone that doesn't understand what he is buying,.. well yeah you r right  Happy summer mining at +85'C with those rigs, at least the PSUs wont shut off, cause there is two LoL  which in my country equals to ~20$ higher electricity bill. Just admit that you lack the imagination and skills needed to power 6xGPUs with a single PSU that is made for 4xGPUs without setting it on fire, and I might enlighten you how to do it.  or you could quit being a douche bag and let the guy show his work. He built it therefore he can show it. do you know what the order was for that he is building, perhaps the client wanted the 2 psu to split the power draw to 2 different sockets. as far as cooling, again you do not know. perhaps the client has a 10000 btu ac unit he wants to set this in front of. till you know the details...hush. |
|
|
|
Out of curiosity, why are you guys using air conditioners to cool your mining rigs? I would think it is much more cost effective to exhaust all the discharge heat and maintain good air flow
AC is used when you cant/dont have free flowing air. ie in a basement not near any windows or where the incoming air is to warm. your right in that controlling heat and good air flow is best but sometimes that isnt possible. |
|
|
|
omg... I feel for the guy. That's really bad piece of programming logic to allow such a high tx fee to go through. I doubt if BTCC will respond... however, never say never... there are still decent people out there. looks like he is getting the money back. linkawesome that BTCC COO replied him personally. wow. i figured that btc was gone for sure. awesome that they gave it back to the guy. |
|
|
|
wow. how do you not double check what you are sending. I only send .1 to my rentals and I double check that if not triple check. sending 13 not only would I check it but I would someone else check my double check. hate to say it but he will never see that 13 btc again. if the pool owners don't pocket it the miners wont give it back. btw sorry2xs : that is the car. that's the way they come. they are known as a maloo or ute. basically the idea behind them was that you could go shopping with them during the week and still do farm work on the weekend since its got a flatbed. (hit utube for videos of them) |
|
|
|
not to be to off topic but yes those are only found there. they are the new version of the old el camino. 1/2 car 1/2 truck. And yes they are quick I think they come standard with an LS7. if I remember correctly. Big mighty car mods and top gear fan . bought amazon prime just to watch the new season. Im surprised that kano doesn't have a huge solar farm with a shed full of miners.. lol having that much sun all the time citronick: mighty car mods is a youtube chan of 2 dude that modify and work on cars. |
|
|
|
|
been tossing around the idea of getting one as well. waiting to see the results for heat issues. since the backplate has been replaced you cant attach a fan easy. would rather not have to downclock it just to keep it functional. for that ill get an Avalon.
maybe they will realize the error of their ways and the lack of urgency to purchase this version and bring back the 2 fan in version 17.
|
|
|
|
kano being kano probably got up set out the payment and went back to sleep.
im thinking the auto pay would have been announced if it was online.
I honestly think he never really sleeps...maybe a power nap every once in a while! rumor..kano is an advanced AI prototype. Ready for the Turing test, buddy?  If that's the case stick him in a race car and let him run le mans. Kano: ever watch Mighty car mods? its from 2 car dudes down under. |
|
|
|
|
kano being kano probably got up set out the payment and went back to sleep.
im thinking the auto pay would have been announced if it was online.
|
|
|
|
Rumour has it that Bitmain is planning on releasing S7-F0 model for the next batch.
How often do they release new batches? his comment of an s7-f0 is a joke. saying that the current version (16) is the s7-f1 (one fan unit) with the s7-f0 (being 0 fans). but as far as batches. they seem to have a new batch lately every 2-3 weeks. Seems to be every production run is a new batch. ie they have 1000 made and thats 1 batch. then another 1000 and thats another batch. |
|
|
|
Block! Thankfully this one didn't wait for my node to come back up like the last long block did (since that is going to be a while-- just trying to move the VM to a good disk is proving to be a pain since the disk is failing so quickly; I may have to start over with a fresh install).
I've been renting fairly steady for days now (and still am), so lets make the next few quick ones!
i got 2 that are stalled. 1 at .0029 the other at .0028. might increase both just to get them started. |
|
|
|
by removing plaque which replaces the fan.
the holes may be below.
Let 's hope it is the same case.
looks like they just replaced the back plate of the unit which had the screw mounts for the fan with the new grating as it is using the same mounting holes as the previous backing plate (right in the corners) Then adding the Sanyo ace that I supplied for the last avalon6 group buy should fix the issue. you wont be able to mount it with screws but i think small zip ties would work to mount the fan to the grate. |
|
|
|
|
do they not work at all or not with the hub?
try sticking it right in the machine see if it recognizes it then. Might have to zadig each one separately to work together on the hub.
or the usb port is not registering the hub and in-turn not recognizing the devices. Powered usb hub i assume...right?
|
|
|
|
by removing plaque which replaces the fan.
the holes may be below.
Let 's hope it is the same case.
looks like they just replaced the back plate of the unit which had the screw mounts for the fan with the new grating as it is using the same mounting holes as the previous backing plate (right in the corners) |
|
|
|
Also I just bought this lol. For $265 on ebay so I will want to run it for a bit. My goal would be to mine enough to buy an S7 but that could take a while if ever.
maybe try relisting, maybe the person you beat in the auction will buy. see if you can get yourself 2 s5's would be more power efficient, which would allow greater profit thus a faster s7. im sure there are plenty on here people are selling. |
|
|
|
|
that seems like a giant pain that i keeps jumping IPs. there any new firmware that fixes that or is that permanent to the s4.
or better yet, sell that paper weight and turn it into a couple s5 or a new s7.
|
|
|
|
|
true the prices will plummet like a stone. If new hardware comes out around that time. no hardware the price might increase
|
|
|
|
|
did you ever get the low diff port figured out? i know you were saying there were issues with it.
|
|
|
|
so far a good recovery from our red block. getting that green back up on the stats board. 6 for the day...can we make it 8? |
|
|
|
|
Show Posts
