ESPERS($ESP) 76 Votes  Keep up the voting And it is on 25th place on paid votes : ESPERS($ESP) 46170 We can do daily free votes, yes karma points is a good addition to this also. |
|
|
|
After this then 2nd giveaway will start Secure emails = 1000 ESPERS + 1 ESPER per byte of message, with a practical maximum of maybe 16k message (any longer and it's too long and might get kicked out of the transaction or something wierd.) So a typical message would be 2000 to 3000 ESP, plus transaction fees. Maybe something like that.
That's just an idea, I don't know how it would work.
Hmmm that's not a bad idea, however the fee will have to adjust according to market value, otherwise not everyone would be able to send messages once the project gained more popularity. CryptoCoderz would you make a new chain based on espers with less amount of total coins ?
We will have to get back to you on that... the reason we say that is we will be using ALL of our current chains that we run (well more like dragging ever since Espers launched) to interface with Espers and each other. Each will have their own purpose and abilities. Sidechains are the future, however we believe chain-to-chain interfacing bypasses the limitations of sidechains. This community used to be massive but since NovaExchange went down, GPU miners came out and the 2nd giveaway postponed it has lost a lot of members.
This thread used to be bumping every day now it's at snail speed...
Well what do u expect . With the free giveaway. Wait till the second giveaway and those absent now will be back There should be lots of people here on the 16th. Now a days everyone is in a hurry. If you can't sell it on an exchange the same day they're not happy. I'm playing the waiting game. But i'm really curious about the Site Hosting on the Blockchain. Wonder how it will be implemented. Yup interesting it is . Two of those mentioned.I think is great concept Once implemented, Espers will have a remarkable feat because no one has ever done this wallet feature before. We are going for revolutionary good sir! The activity will come and go, people are finicky creatures. What's new guys? Sorry, haven't been very active last 24 hours - someone fill me in with the lastest ESP news? Thanks in advance  Time to hop on Empire-X!!!!!!!!!!! LOTS! Client Control System is nearly done! Was delayed because we decided to make it look more legit by actually implementing the menus directly into the client as apposed to a modal called window which is just tacky.
@EveryoneSorry for the delay on the CCS (Client Control System), it was ready for launch the day prior but it would have been such a tacky look that we couldn't go through with it. So instead we decided to rework it into the client more directly so that it wouldn't look like a tacked on forethought but a real legitimate feature. I'm personally sure you all will enjoy it significantly more as such. In the meantime while you wait on us check out the votes so far. Remember guys... THE VOTING ENDS TOMORROW!!!!! Simple858 - 8bitwarrior
bitwarrior - 8bitwarrior
shintosai - 8bitwarrior
[s]arseaboy - 8bitwarrior[/s] (shintosai)
cyberpitstop - jordanw6
captaindz - jordanw6
EkimFlow - jordanw6
Tbone123 - jordanw6
viriat0 - jordanw6
AmoreJaz - jordanw6
eye-drop - jordanw6
monoxide - jack liver
E1337/Zefimov - JenTH
NumNim1978 - JenTH
alexcfr - alexc_fr
lionwl_messi - lionwl_messi
In otherwords: CURRENTLY: 1st place - jordanw6 (7 votes)
2nd place - 8bitwarrior (4 3 votes)
3rd place - JenTH (2 votes)
KEEP THOSE VOTES COMING FOLKS!!! Thanks to those who have voted for my entry, if you still not been able to vote, start voting now. Thanks Here is once again my entry for those unable to check on the other forum:  @ Everyone -
The theme competition is officially very over.
The voting will run until May, 16th, 2016
In fact I was a day late to close the thread on garden and to post the rules of voting for your favorite theme! (Sorry)
To vote you must meet these requirements:
You must have posted on EITHER, bitcointalk or bitcoingarden forums ON THE MAIN ANN before the end of this competition to be deemed a valid voter!
RULES OF VOTING
1. PM Me, here, in BitcoinTalk or Garden (to be specific ME = CryptoCoderz and NO OTHER MEMBER)
2. When PM'ing simply state the username of who submitted your favorite design.
3. ONLY ONE VOTE PER PERSION PERIOD
4. DO NOT POST IN THE THREAD!!!!!!!
May the best design win!
|
|
|
|
@EVERYONE - CRYPTOPIA IS NOW ACCEPTING ESPERS AS A VOTING CANDIDATE, VOTE VOTE VOTE!!!! Thank you goes to Samai for getting us listed on the voting!!! WOOT!!! https://www.cryptopia.co.nz/Vote |
|
|
|
|
I see that we have better chances on cryptopia than in c-cex. So if you have already cast on the free votes, you do not have the ability to cast on paid votes? Let us put ESP on the top.
|
|
|
|
@EVERYONE - CRYPTOPIA IS NOW ACCEPTING ESPERS AS A VOTING CANDIDATE, VOTE VOTE VOTE!!!! Thank you goes to Samai for getting us listed on the voting!!! WOOT!!! https://www.cryptopia.co.nz/Vote This is great news. Let the Espers Community show their Full Force and Vote! We have 4 votes now WOW! Done! I knew this would happen! Go Espers! Very nice we have 7 votes now and this free votes will accumulate for 1 month before a coin get selected. There is another for paid votes where in currently they will choose a new coin after 8 hours. Espers on paid votes has 145. To those who have big pockets there and want Espers to be added soon, this is the boost mode |
|
|
|
@EVERYONE - CRYPTOPIA IS NOW ACCEPTING ESPERS AS A VOTING CANDIDATE, VOTE VOTE VOTE!!!! Thank you goes to Samai for getting us listed on the voting!!! WOOT!!! https://www.cryptopia.co.nz/Vote This is great news. Let the Espers Community show their Full Force and Vote! We have 4 votes now WOW! |
|
|
|
How much is 1 Wave now?
0,0485 Where do you get this value? Can you share your reference? Thanks |
|
|
|
Buy Valorbit at yobit |
|
|
|
After this then 2nd giveaway will start Secure emails = 1000 ESPERS + 1 ESPER per byte of message, with a practical maximum of maybe 16k message (any longer and it's too long and might get kicked out of the transaction or something wierd.) So a typical message would be 2000 to 3000 ESP, plus transaction fees. Maybe something like that.
That's just an idea, I don't know how it would work.
Hmmm that's not a bad idea, however the fee will have to adjust according to market value, otherwise not everyone would be able to send messages once the project gained more popularity. CryptoCoderz would you make a new chain based on espers with less amount of total coins ?
We will have to get back to you on that... the reason we say that is we will be using ALL of our current chains that we run (well more like dragging ever since Espers launched) to interface with Espers and each other. Each will have their own purpose and abilities. Sidechains are the future, however we believe chain-to-chain interfacing bypasses the limitations of sidechains. This community used to be massive but since NovaExchange went down, GPU miners came out and the 2nd giveaway postponed it has lost a lot of members.
This thread used to be bumping every day now it's at snail speed...
Well what do u expect . With the free giveaway. Wait till the second giveaway and those absent now will be back There should be lots of people here on the 16th. Now a days everyone is in a hurry. If you can't sell it on an exchange the same day they're not happy. I'm playing the waiting game. But i'm really curious about the Site Hosting on the Blockchain. Wonder how it will be implemented. Yup interesting it is . Two of those mentioned.I think is great concept Once implemented, Espers will have a remarkable feat because no one has ever done this wallet feature before. We are going for revolutionary good sir! The activity will come and go, people are finicky creatures. What's new guys? Sorry, haven't been very active last 24 hours - someone fill me in with the lastest ESP news? Thanks in advance Time to hop on Empire-X!!!!!!!!!!! LOTS! Client Control System is nearly done! Was delayed because we decided to make it look more legit by actually implementing the menus directly into the client as apposed to a modal called window which is just tacky.
@EveryoneSorry for the delay on the CCS (Client Control System), it was ready for launch the day prior but it would have been such a tacky look that we couldn't go through with it. So instead we decided to rework it into the client more directly so that it wouldn't look like a tacked on forethought but a real legitimate feature. I'm personally sure you all will enjoy it significantly more as such. In the meantime while you wait on us check out the votes so far. Remember guys... THE VOTING ENDS TOMORROW!!!!! Simple858 - 8bitwarrior
bitwarrior - 8bitwarrior
shintosai - 8bitwarrior
[s]arseaboy - 8bitwarrior[/s] (shintosai)
cyberpitstop - jordanw6
captaindz - jordanw6
EkimFlow - jordanw6
Tbone123 - jordanw6
viriat0 - jordanw6
AmoreJaz - jordanw6
eye-drop - jordanw6
monoxide - jack liver
E1337/Zefimov - JenTH
NumNim1978 - JenTH
alexcfr - alexc_fr
lionwl_messi - lionwl_messi
In otherwords: CURRENTLY: 1st place - jordanw6 (7 votes)
2nd place - 8bitwarrior (4 3 votes)
3rd place - JenTH (2 votes)
KEEP THOSE VOTES COMING FOLKS!!! Thanks to those who have voted for my entry, if you still not been able to vote, start voting now. Thanks Here is once again my entry for those unable to check on the other forum: |
|
|
|
anyone notice any different from -w 64/128/256 + i cant notice any different and leaving it off .
for Intensity -15 look like the sweet spot , -16 + make my computer unusable with only 1 kh/s more per 1+ increase . and -I 20 =crash
0
doesn't look like too much of an increase in memory speed increase from stock 1500
Try this one: I've submitted a >10% hashrate improvement to the sgminer git repository. You don't need to wait for a new build, just replace this file: https://github.com/pallas1/sgminer_HMQ1725/blob/patch-1/kernel/hmq1725.clAnd remove the bin files in the miner's main directory before running it. Enjoy, and if you have a few pennies lying around, the donation address is in my signature, thanks! :-) |
|
|
|
Thanks got it working. Getting 520 kh/s under volted Gigabyte 280x @ 1030 mhz ~ 1.094 / running at 59C ( cooler then ether mining ) going to play around it see if i can get any better setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
timeout /t 4
sgminer.exe --kernel hmq1725 -o stratum+tcp://esp.suprnova.cc:3453 -u billyboy402.1 -p x --gpu-platform 1
pause
That's great So what was the last step that made it work? |
|
|
|
I have notice that my gpu use is still stuck at 300 mh/s but goes to 1100 when i start up ether miner
Is that normal values? sorry I do not know whats the average hash for eth mining. You mean you are still running another gpu miner at the same time? no Like my my GPU is spiing up to full speed , still stuck on idl stage So it maybe a gpu card issue then, try restarting your PC and check if its the same outcome. DO you have latest driver installed for your gpu card? |
|
|
|
I have notice that my gpu use is still stuck at 300 mh/s but goes to 1100 when i start up ether miner
Is that normal values? sorry I do not know whats the average hash for eth mining. You mean you are still running another gpu miner at the same time? |
|
|
|
sgminer.exe --kernel hmq1725 -o stratum+tcp://esp.suprnova.cc:3451 -u billyboy402.1 -p x -I 8 Keep crashing for me are you sure you are using hmq1725 and not hmg1725. i had that problem first. one thing try with only the following line: sgminer.exe --kernel hmq1725 -o stratum+tcp://esp.suprnova.cc:3453 -u account.user1 -p x ok with miner.exe --kernel hmq1725 -o stratum+tcp://esp.suprnova.cc:3453 -u billyboy402.1 -p x -I 15 -w 256 -------------------------------------------------------------------------------- [P]ool management [G]PU management ettings [D]isplay options [Q]uit
GPU 0: 32.0C 1881RPM | 75.67K/22.54Kh/s | R: 16.7% HW:0 WU:20.546/m I:15
--------------------------------------------------------------------------------
Is that normal for a 280x
Look like i get more with my cpu i5 4670k get me ~97Kh/s
A 280x produce an average of 500kh/s in my testings... yea i am way under. i thought it wasnt right becasue my temp where at idl Are you running other cpu intensive applications while running the batch file? Maybe try to increase the I value, steady increase it by 1, and check the outcome? |
|
|
|
[20:46:34] Started sgminer 5.1.1
[20:46:34] * using Jansson 2.7
just sitting there
Just need to wait a bit. |
|
|
|
This is the content of the batch file I am using:
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
sgminer.exe --kernel hmq1725 -o stratum+tcp://esp.suprnova.cc:3453 -u account.user1 -p x -I 15 -w 256
Hope it helps.
Is this settings will be okay using nvidia 940 built in on my laptop just curios i have a i7 laptop already mining using my cpu just wanted to try this but needed your info. I suggest that you try to wait for the gpu miner that they are developing for nvidia cards, and I think you should initially start with low Intensity value such as 8, then you can make incrementation and observe your laptop. But honestly I would not try even to mine using the gpu on my laptop, you will going to overheat and wreck it. |
|
|
|
sgminer.exe --kernel hmq1725 -o stratum+tcp://esp.suprnova.cc:3451 -u billyboy402.1 -p x -I 8 Keep crashing for me Try to delete those *.bin that got accumulated on the folder where the sgminer is located and run the batch file again. |
|
|
|
I'm mining with my NVIDIA 970M with no issues I didn't clarify. You can mine with nvidia with sgminer, but you will not get anywhere near the hashrate that you will with ccminer when it is released. Is there any bat file that any one want to share , the example show --kernel Lyra2RE . but it doesnt work for me remove Lyra2RE and change it to hmq1725 could you help with providing a bat file ? when i open the exe. it run but when i try with a bat file it crash This is the content of the batch file I am using: setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
sgminer.exe --kernel hmq1725 -o stratum+tcp://esp.suprnova.cc:3453 -u account.user1 -p x -I 15 -w 256 |
|
|
|
I'm mining with my NVIDIA 970M with no issues I didn't clarify. You can mine with nvidia with sgminer, but you will not get anywhere near the hashrate that you will with ccminer when it is released. Is there any bat file that any one want to share , the example show --kernel Lyra2RE . but it doesnt work for me remove Lyra2RE and change it to hmq1725 |
|
|
|
People using "free electricity" are almost always stealing it.
It is not stealing until you get caught A sad truth about the cultural mentality of the people I know of that said country, I hope it will be eradicated or minimize with the new administration that will start in next months ahead. |
|
|
|
|
Show Posts
