I don't see boost for 1080ti...may be around 0.2% as Dev said.
|
|
|
New Version 0.5.6 reduce cpu load minor performance improvements
This release contains many internal optimizations. CPU load is lower by about 15%-20% now. The solver contains some minor performance improvements - it's about 2%-2.5% on an 1060 and about 0.2% on faster GPUs. People on overclocked systems may have to readjust their setting since this version 'pushes' the GPUs slightly more.
Thank you very much.
|
|
|
I have been running this miner in ethos for 24 hours. It reports more sols than ewbf, but it seems to drop from the zen suprnova pool regularly. I can see miners drop and reappear just staying logged in and watching. Anyone else see this issue? I plan to leave this running for more days, but curious if others are seeing this or if this may be normal. ewbf didn't have this same behaviour on suprnova.
I got problem with ZEN same as you. Dev said what it's normal, said server sent packet which information to close connection, but could ZM ignore this packet? This packet got all card in the same time? (8 my cards reconnects)
|
|
|
When appeared "error recv failed: 10054 " ? Due overclocking ?
No it's not connected to overclocking. This happens if the remote host/server closes the connection - it might also happen if your local network goes down. I have problem with BTG on SUPRNova Pool time to time i get message error recv failed: 10054 and my contime timer resets, EWBF on same server work without reconnect. It can happend afteer 5-10 hours of work ZM. Nothing major but may be ZM can ignore packet which make him recconect? (Same was for ZEN on https://zenmine.pro/)
|
|
|
Hello all.
What happens when "contime" reset but uptime continue count?
Contime means time from last disconnect from pool server?
When appeared "error recv failed: 10054 " ? Due overclocking ?
|
|
|
Please Add autorestart function, right now if error apeared i got messange from windows what error with Zm.exe and windows ask me press OK
|
|
|
Are there any ways or opportunities to increase the productivity of the miner in new releases? When should we expect a new version?
|
|
|
I guess better reduce block size for 3000 and 125 dev fee. it will be more comfortable for us.
|
|
|
The server closes the connection periodically - even if I'm using a single connection to it. You might see it more often on zm since it uses multiple connections, however you should also see similar behavior on other mining software.
luckpool.org
ZEN mining SAME PROBLEM.
Even on single 1060 card. Something wrong with mining ZEN.
Could you check please?
|
|
|
One from my rings on EWBF and he is work properly on this poll, without reconnect 2 hours in the time while dstm have a lot of reconnect. I'm sure it was in the same time.
The server closes the connection periodically - even if I'm using a single connection to it. You might see it more often on zm since it uses multiple connections, however you should also see similar behavior on other mining software. luckpool.org
ZEN mining SAME PROBLEM. Even on single 1060 card. Something wrong with mining ZEN. Please FIX. EWBF work fine. The server sends a TCP FIN packet i.e. closes the connection periodically. Could dstm miner ignore this packet ? continue mining ? zm 0.5.4
|
|
|
One from my rings on EWBF and he is work properly on this poll, without reconnect 2 hours in the time while dstm have a lot of reconnect. I'm sure it was in the same time.
|
|
|
Problem while mining ZEN ON https://zenmine.proeu.zenmine.pro:9009 Every 2 minutes conection closed by server r:0Could you check please? EWBS work on this server without problem, with dstm every ~2-4 minutes conection closed by server r:0
|
|
|
Could you make an application auto-restart when an error occurs during overclocking? How is it done in EWBF?
After the crash, I get a message that the process is stopped and click OK. The VM does not restart automatically, it's very uncomfortable. I understand that I have to find a balance between overclocking and stability, but there is not enough autorestart to do this.
Tnx you.
|
|
|
Please add this coin to Cryptopia! no Cryptopia, go Bittrex) I'm agree. Vote for Bittrex or Poloniex. Please do your best to get to these exchanges. The price of the coin will increase significantly if we can get to the Bittrex or Poloniex exchanges.
|
|
|
Maybe there is an opportunity to increase performance on GDDR5X? (1080 and 1080TI) Due to prefetch and 64B data per memory access ?
Actually this is something that increases memory latency as far as I understand. Can be doubling the buffer in 2 times, eventually give more SOL with an increased delay? Is it possible to check?
|
|
|
Maybe there is an opportunity to increase performance on GDDR5X? (1080 and 1080TI) Due to prefetch and 64B data per memory access ?
|
|
|
After some times i see what my preformance is significantly reduced. This does not cause any error. It only works at 1% of its capacity.
|
|
|
I'm somewhat unhappy with 0.5.3, I've discovered 2 bugs so far. If it's unstable for you use 0.5.2 pls. I'm rechecking it's changes.
Friend, could you check performance on gtx1080 ? It's don't have increased performance to compare EWBF miner. I have advantage on 1060, 1070, 1080ti around 5%, but 1080 have same score or less than ewbf's miner. And please add uptime timer in browser telemetry. Tnx you very much. P.S. GDDR5X trash? Any chance to get some advantage from this type of memory in your miner?
|
|
|
On version 0.5.3 (windows) decreased performance on gtx 1080.
|
|
|
1 cent or 0.01 $ is done for btcz :-). Next step : 0.1 $. When ? 1 week, 1 month, 1 quarter ? What is your time goal to go to 0.1 $ ?
If we will hold BTCZ and don't will sell he is reach our goal faster.
|
|
|
|