the amount of 0 means 0 nxt in that transaction because no one is getting any nxt and the 1 is the fees required per mint. red is the fees going out. if you look closely in the transaction details by clicking on the transaction id, you can find the amount of minted coins in the raw data section. eg https://nxtblocks.info/#section/txid/1045945306017018459Raw data Attachment {"counter":"2","currency":"5775213290661997199","nonce":"-9028463701948602883","units":" 100000","version.CurrencyMinting":1} that is 10coins minted. you need to find your minted coins under monetary system tab. click my currencies tab on top right and you can see how much you have.
you are minting monetary system currency. you are not minting any more nxt from this.
you may sell your mscoins for nxt in the exchange booth in the client.Thx again.....how do I find EGOLD.....I found it under my currencies tab Thanbk You again |
|
|
|
to mint mscoins you do not need any more than 1 confirmations of your nxt in your wallet.
remember to change the minting settings
1.Locate nxt-default.properties file in nxt-client-1.4.7.1\nxt\conf folder
2.Copy paste this file and rename it to nxt.properties
3. Open the file, locate the parameter below and change them accordingly:
Configuration:
nxt.mint.serverAddress=localhost
nxt.mint.currencyCode=EGOLD
nxt.mint.secretPhrase=your passphrase
nxt.mint.unitsPerMint=10
(The stronger your miner is the higher value you should put here. it means numbers of coins you want to mint each time, the more you put here the longer it takes to mint but cheaper the fees. this one means 10coins per 1nxt fee.)
nxt.mint.threadPoolSize=0
nxt.mint.initialNonce=0
nxt.mint.isSubmitted=true
That's exactly my config; I did hit 2 blocks of 10 units....marked in the NXT minting window.. however I got payed 0 + 1 (red)...1 NXT was removed from me/transaction and the twice 10...I never got them... why is that ? similar transaction can be found there: https://nxtblocks.info/#section/blockId/5614132592372667862in the bottom table is marked as type : Monetary System Currency Minting but the amount is 0 and fee is 1 |
|
|
|
I can't mine.... I bought some nxt on Bittrex....but the system says I need 1440 confirmations for my coins....  Is this normal ? That seems rather excessive. Try http://shapeshift.io, it doesn't get much faster. Nd I'm getting this error : SEVERE Main.main: Exception during program initialization
.IndexOutOfBoundsException: Index: 0, Size: 0
t java.util.ArrayList.rangeCheck(Unknown Source)
t java.util.ArrayList.get(Unknown Source)
t org.ScripterRon.NxtMint.Main.main(Main.java:296) Does your NxtMint.conf file have two parameters for the gpuDevice line? For non-Scrypt hashing (i.e. EGOLD) it should be something like: gpuDevice=0,256thx that solved the problem but i still need 1440 confirmations for mature coins.... |
|
|
|
Nd I'm getting this error : SEVERE Main.main: Exception during program initialization
.IndexOutOfBoundsException: Index: 0, Size: 0
t java.util.ArrayList.rangeCheck(Unknown Source)
t java.util.ArrayList.get(Unknown Source)
t org.ScripterRon.NxtMint.Main.main(Main.java:296) |
|
|
|
I can't mine.... I bought some nxt on Bittrex....but the system says I need 1440 confirmations for my coins.... Is this normal ? |
|
|
|
Thx found what I was looking for... I'm getting this message even if my hash rate shows mining : No suitable long-poll found for http://any clues ? I think you can ignore this. As long as your hashrate shows mining. When you are solo mining you do not get long polling anyway, right? OK thx again |
|
|
|
Thx found what I was looking for... I'm getting this message even if my hash rate shows mining : No suitable long-poll found for http://any clues ? |
|
|
|
|
Can someone tell me if I can mine to one wallet in my home network ??
If yes how to get it setup ?
Thx
|
|
|
|
Nominating @IconicExpert for #bytecent.
It's a Game-changer!
Same here Nominating @IconicExpert for #bytecent. It's a Game-changer! http://coinblab.com/forums/12 |
|
|
|
Thx CK for this pool joined with my 2*U2 and 1 Block Erupter...whopping 4,3GHash/s  {"hashrate1m": "4.27G", "hashrate5m": "3.16G", "hashrate1hr": "636M", "hashrate1d": "39.2M"} |
|
|
|
wow You never sleep  Actually I do .. probably not enough though. It worked THX Now I have 2 other questions; 1- My Ant Monitor V3.3 gives me this error since the cgminer update: ERROR when querying S1:1.193:80 (step 1): After parsing a value an unexpected character was encountered: {. Path 'STATS[0]', line 1, position 180tried the beta version..no fix... There's apparently a cgminer/firmware combination out there I haven't encountered yet. Once I get my next round of UI changes stable, I'll try a few more combinations of firmware/cgminer. I have two S3s now, so it's a little easier, and I have some S3+ units on the way. 2- Did anyone updated the cgminer in their S1 s ? same procedure ? or not
I doubt it's the same process. I recommend using Kano's S1 patch. It's not the latest version of cgminer, but it's probably newer than what Bitmain has made available. https://github.com/kanoi/cgminer-binaries/tree/master/AntS1M Ok will try that Thx again |
|
|
|
Tried to update my S3s cgminer.. everything seemed ok when executing commands..
however after reboot in my system/software tab I still have the old cgminer version.....any clues ?
The value listed there is wrong. Back in the command prompt, run /usr/bin/cgminer-api. Scroll to the top, the version is there. M wow You never sleep It worked THX Now I have 2 other questions; 1- My Ant Monitor V3.3 gives me this error since the cgminer update: ERROR when querying S1:1.193:80 (step 1): After parsing a value an unexpected character was encountered: {. Path 'STATS[0]', line 1, position 180tried the beta version..no fix... 2- Did anyone updated the cgminer in their S1 s ? same procedure ? or not |
|
|
|
Remember i upgraded my cgminer as well to this version which makes the rigs much faster in response times - Confirm. Both my S3s Batch 7 were upgraded well this way. CPU load now is about 90% instead of 99-100% with old cgminer. WebGUI is a bit quicker. Niiice!  p.s. I suspect that it will not work for S2?.. It is valuable to note, also in doing this - my rigs have really settled down and require far less intervention. All 16 now running this version - my S3's are batch 2 and batch 3 This. I've been moaning on to Bitmain about this for ever. They insist on using an outdated version of cgminer in all their firmware releases, even the new S3+ - why? It's almost as if they want to keep this version for some (well known) reason...... I know people are probably sick and tired of me harping on about it, but why the hell don't Bitmain just include the latest cgminer version in their firmware? Life would be so much easier..... Tried to update my S3s cgminer.. everything seemed ok when executing commands.. however after reboot in my system/software tab I still have the old cgminer version.....any clues ? |
|
|
|
The link I provided above has a FAQ I believe that shows you how.
My S1 is turned off atm else I'd look.
M
It's not what I meant.. I know how to upgrade... Just don't want to do it without knowing if I already have the latest firmware.. Don't want to mess with it for nothing as it's always risky... and I'm a kind of person that believes that if it's not broken, don't fix it and my miners hash very well and stable.... however I like the utility of Your soft and would love to fully profit from it's features The readme.pdf in the link above describes how to find out what firmware version you're using. https://www.bitmaintech.com/files/download/readme.pdfM me bad.. I didn't read that file...thx for your patience Just updated and now no more error thx |
|
|
|
The link I provided above has a FAQ I believe that shows you how.
My S1 is turned off atm else I'd look.
M
It's not what I meant.. I know how to upgrade... Just don't want to do it without knowing if I already have the latest firmware.. Don't want to mess with it for nothing as it's always risky... and I'm a kind of person that believes that if it's not broken, don't fix it and my miners hash very well and stable.... however I like the utility of Your soft and would love to fully profit from it's features |
|
|
|
Hey I really like your soft. I'm getting this error: [b]ERROR when querying S1:1.222:80 (step 1): Error reading JObject from JsonReader. Path '', line 0, position 0.[/b] Do You know what causes this ? Is it an S1, or an S3 labeled as an S1? Are you using the most recent firmware for it? M S1...however I don't know how to check the firmware version.... is it the Kernel Version 3.10.12 ?? I think the important thing is the date. Have you ever upgraded the firmware? See here: https://www.bitmaintech.com/support.htm?pid=00720140411033846942qQqjOD460695M I got them used....they hash well and without issue.... I don't want to change firmware just to change and even without knowing that I already might have the latest... there must be a way of checking the version out....I just don't know where and how... |
|
|
|
Hey I really like your soft. I'm getting this error: [b]ERROR when querying S1:1.222:80 (step 1): Error reading JObject from JsonReader. Path '', line 0, position 0.[/b] Do You know what causes this ? Is it an S1, or an S3 labeled as an S1? Are you using the most recent firmware for it? M S1...however I don't know how to check the firmware version.... is it the Kernel Version 3.10.12 ?? |
|
|
|
Hey I really like your soft. I'm getting this error: [b]ERROR when querying S1:1.222:80 (step 1): Error reading JObject from JsonReader. Path '', line 0, position 0.[/b] Do You know what causes this ? |
|
|
|
|
Got my unit fast and as described
|
|
|
|
|
Show Posts
