Need help on finding good pool.
1gh is down, and I only got 200MH/s (I get 800MH/s on all other pools) dwarfpool got so many orphans suprnova is VERY SLOW max coinedpool (i'm there currenctly) HAVE 0.1 TX FEE for auto AND manual withdrawal, WTF?
|
|
|
ok, I NEED to fix this NOW.
On 1gh, it says I have 200MH/s but my cgminer reports 800-900MH/s
The difficulty is low, it's 15.
Please help me.
It does say "VERY INACCURATE"... This doens't affect your miner or your reward. And the difficulty is 34k... I only get 0,02% of shares. The pool is 400 000 Mhash, 0,02% is 80 Mhash. But I have 900 Mhash, something is wrong.
|
|
|
ok, I NEED to fix this NOW.
On 1gh, it says I have 200MH/s but my cgminer reports 800-900MH/s
The difficulty is low, it's 15.
Please help me.
|
|
|
ok, I NEED to fix this NOW.
On 1gh, it says I have 200MH/s but my cgminer reports 800-900MH/s
The difficulty is low, it's 15.
Please help me.
|
|
|
did this cant get it to work cgminer just comes on but dosent start mining have the latest beta driver for catalyst and windows 7 64 up to date any ideas? i dont have a config file set up would that do it? never made one for any other cgminer tho
I had to start the miner about 10 times in order for it to connect to 1gh, it can take a while, I guess it's because the pool is very busy and likely prioritizing already connected miners. edit: great
|
|
|
fuck sleep i think i'm just gonna mine until i die time for more coffee.. . 4:20 am.. @_@ need to see these maxcoins http://max.1gh.com/user?wallet=mUATwaKt1B9ymSHgoTRWBS628W8j7tQtZS before i can rest.. am i not seeing anything because no blocks have been confirmed yet or somethign? i've been mining for like maybe an hour or so ~_ You must be doing something wrong. Please make sure you have the right wallet address in your bat file. I made a simple explanation how to mine from 1gh, restart and do it all over. 1. Download Cgminer at http://maxdl.1gh.com/cgminer-windows.zip?nocache=0.74624864361248912. Extract zip 3. Go into folder 4. Edit max1gh_start.bat 5. Change wallet address to your wallet address. 6. Save file 7. Run file That's it. If it doesn't work, update driver, update windows. Tip: change your intensity to 14 while cgminer is running. 1. Push (G) 2. Push (I) 3. Select gpu by writing 0 then enter 4. Write 14, then enter. if you have more gpus, just repeat step 3 and 4 by writing 1, 2, 3 etc depending on how many gpu's you have You'll be able to see your balance and stats on http://max.1gh.com/Just paste your wallet address into the User Stats. yep followed those instructions to a T.. it even says my shares are being accepted... but no movement at all on my address.. ive only been mining for about 10 mins though so ill wait and see what happens... Double and triple check that the address is your address, and that it matches the address you're checking on 1gh. If it's correct, then I have no idea. Edit: I'm seeing activity on your address. http://max.1gh.com/user?wallet=mUATwaKt1B9ymSHgoTRWBS628W8j7tQtZS
|
|
|
fuck sleep i think i'm just gonna mine until i die time for more coffee.. . 4:20 am.. @_@ need to see these maxcoins http://max.1gh.com/user?wallet=mUATwaKt1B9ymSHgoTRWBS628W8j7tQtZS before i can rest.. am i not seeing anything because no blocks have been confirmed yet or somethign? i've been mining for like maybe an hour or so ~_ You must be doing something wrong. Please make sure you have the right wallet address in your bat file. I made a simple explanation how to mine from 1gh, restart and do it all over. 1. Download Cgminer at http://maxdl.1gh.com/cgminer-windows.zip?nocache=0.74624864361248912. Extract zip 3. Go into folder 4. Edit max1gh_start.bat 5. Change wallet address to your wallet address. 6. Save file 7. Run file That's it. If it doesn't work, update driver, update windows. Tip: change your intensity to 14 while cgminer is running. 1. Push (G) 2. Push (I) 3. Select gpu by writing 0 then enter 4. Write 14, then enter. if you have more gpus, just repeat step 3 and 4 by writing 1, 2, 3 etc depending on how many gpu's you have You'll be able to see your balance and stats on http://max.1gh.com/Just paste your wallet address into the User Stats.
|
|
|
MaxCoin @maxcoinproject 11 min For anybody still using the command-line wallet on Windows, the graphical wallet is available at http://maxcoin.co.uk MaxCoin @maxcoinproject 12 min @polarmatrix @stacyherbert @maxkeiser the graphical wallet for Windows was released last night. You can find it at http://maxcoin.co.uk
|
|
|
you didnt fine tune at all?
see my post again, I edited it
|
|
|
anyone have a good config for 280x cgminer?
im looking to make my R9 290 work... 1. Download Cgminer at http://maxdl.1gh.com/cgminer-windows.zip?nocache=0.74624864361248912. Extract zip 3. Go into folder 4. Edit max1gh_start.bat 5. Change wallet address to your wallet address. 6. Save file 7. Run file That's it. If it doesn't work, update driver, update windows. Tip: change your intensity to 14 while cgminer is running. 1. Push (G) 2. Push (I) 3. Select gpu by writing 0 then enter 4. Write 14, then enter. if you have more gpus, just repeat step 3 and 4 by writing 1, 2, 3 etc depending on how many gpu's you have You'll be able to see your balance and stats on http://max.1gh.com/Just paste your wallet address into the User Stats.
|
|
|
(quick and frequent halving ensures value.) Yyyeah... we've seen a lot of fails based on that assumption already. *coughLEAFcough* Leafcoin had halving every 10 days? This coin will be halved every 69.4 days. 2 minute block time = 720 blocks per days halving every 50 000 blocks 50 000 / 720 = 69.444
|
|
|
Who doesn't love CryptoApples?!
Btw, I think a difficulty retarget of 4 hours is way to much. It'll be 4 hours of mining on lowest difficulty which will result in chaos and ALOT of orphans.
|
|
|
Network hash more than doubled the last 4 hours.
--02:03:00-- "blocks" : 3597, "difficulty" : 6161.34597287, "networkhashps" : 656230623908, 656 GH/s
--06:33:12-- "blocks" : 4161, "difficulty" : 8945.71785040, "networkhashps" : 1403419682617, 1403 GH/s
This is insane
|
|
|
Dwarfpool works so good for me right now! I recommend dwarfpool for everyone. Also the cgminer on their site gives me 2x more hash than arOpenCLMAX miner. http://dwarfpool.com/maxI'm getting 450 MH/s per r9 290 What settings are you using for 450 MH/s per R9 290? i'm only getting 380 MH/s with a 1040 Core clock. cgminer --keccak -o "stratum+tcp://erebor.dwarfpool.com:3339" -u mRL3xNCz6KVNz4S7aiUNPcTZMwdhq7pkkL -p 1 --failover-only -o "stratum+tcp://moria.dwarfpool.com:3339" -u mRL3xNCz6KVNz4S7aiUNPcTZMwdhq7pkkL -p 1 After I start the bat, I configure both gpu's to intensity 14. To do this, push (G), then (I), then select gpu (0, 1 etc) then type 14. On MSI Afterburner I have: Core Clock: 1100 mhz Memory Clock: 1500 mhz Power limit: +20%
|
|
|
Dwarfpool works so good for me right now! I recommend dwarfpool for everyone. Also the cgminer on their site gives me 2x more hash than arOpenCLMAX miner. http://dwarfpool.com/maxI'm getting 450 MH/s per r9 290 the problem is its crashing after a while. i cant go sleep and let it run. any solution for this ? I have no idea, mine doesn't crash. This is my settings: cgminer --keccak -o "stratum+tcp://erebor.dwarfpool.com:3339" -u mRL3xNCz6KVNz4S7aiUNPcTZMwdhq7pkkL -p 1 --failover-only -o "stratum+tcp://moria.dwarfpool.com:3339" -u mRL3xNCz6KVNz4S7aiUNPcTZMwdhq7pkkL -p 1 After I start the bat, I configure both gpu's to intensity 14. On MSI Afterburner I have: Core Clock: 1100 mhz Memory Clock: 1500 mhz Power limit: +20% I have 2x r9 290.
|
|
|
Dwarfpool works so good for me right now! I recommend dwarfpool for everyone. Also the cgminer on their site gives me 2x more hash than arOpenCLMAX miner. http://dwarfpool.com/maxI'm getting 450 MH/s per r9 290
|
|
|
DwarfPool down aswell? wtf is happening. can't mine constantly for 1 hour without fail. switced pools like 4 times already..
|
|
|
I'm trying the cgminer, but the difficulty is so low I'm getting hundreds of shares each minute.
Please share config that works good. I don't know how to use cgminer that good.
|
|
|
|