|
As far as leaving people hanging, feathercoin recently had a mandatory wallet update and pushed out a message to all the old clients saying they need to update. you could probably copy and paste the code for that right into BTB, no?
|
|
|
|
|
So I think what had happened wuz...is ispace opened an old wallet with an old wallet .dat and it connected to CCE which messed things up. I can't explain the messed things up part.
|
|
|
|
do to the recent fork, I've been looking into checkpoint services. the Cryptopia bitbar pool has been going strong, and their hashrate has topped over 51% several times. Good for them, bad for the rest of us. I've emailed dreamwatcher to re-sync his node (and blockexplorer) to the chain that Cryptopia is on - the longer chain wins anyway , right ?! I've got some more studying to do on checkpoints, but so far it looks like a fairly simple update to the source code, and a mandatory wallet update. I don't know if a re-download of the blockchain will be required or not, I let you know later after I test it. I don't have a time frame yet, as it's not an urgent matter, . . . . I'm just getting tired of these stupid forks.  It looks to me like ispace is on a 0.4.0 version of the wallet. They had some kind of hardware failure which was catastrophic and had to rebuild the whole pool without backups or something like that. I see on CCE that there is a satoshi node in the list again also. I think if CCE can make it so to not allow any node to connect to them unless they are the correct one might prevent some of this. Also obviously ispace needs to use the newest wallet. I checked cryptopia against CCE like 5 seconds ago and they look to be in sync. Also H2C is in sync with the both of them CCE and Cryptopia |
|
|
|
I tried to mine FRK at dirtydiggers and it doesn't work for some reason.  |
|
|
|
|
I tried to log in just a few minutes ago and now i think my IP is blocked because now I get this "You are a spammer, hacker or an otherwise bad person."
|
|
|
|
Oh you have to mine this through the wallet only. If solo mining, otherwise join a pool and use cgminer or whatever.
Can you be more specific? I am using the wallet as the server and an A2 Terminator as the miner which has CGminer built into its software. you saying you can only do the "setgenerate=true" and mine like that using CPU only? Solo mine through wallet only, yes this is cpu only. If you want to mine this with gpu or higher need a pool. Seems likely a better option to join a pool with current difficulty anyway. ok that makes sense of it all then. Thanks for the reply. Both pools I like to mine FRK at have been down for awhile now due to fork suspicion. So I set out to solo mine it. just found that ispace has it there so I put some hashpower over there for it. I'm kinda sad I can't solomine with just the wallet, I don't wanna share my block rewards. |
|
|
|
Oh you have to mine this through the wallet only. If solo mining, otherwise join a pool and use cgminer or whatever.
Can you be more specific? I am using the wallet as the server and an A2 Terminator as the miner which has CGminer built into its software. you saying you can only do the "setgenerate=true" and mine like that using CPU only? |
|
|
|
was there a fork?
Not that im aware of. I'll add a new checkpoint, bump the version numbers and recompile sometime soon to help get rid of any confusion. Is there any reason I can't solo mine franko? I have doubled checked everything I can think of. It's gotta be something with the wallet because I checked both firewalls, windows and my router and made sure they are allowing connections. I have tried the default port (7913). i have tried copy and pasting posted Franko.conf files. This is the kicker... I ran BTB wallet using port 9050, had successful blocks mined solo. Then shut the miner down and the BTB wallet. I opened Franko wallet using -server and the conf like it should be except I changed the rpcport to 9050(rpcport=9050) start the miner and get a dead link...I shut down Franko, leaving the miner to failover to H2C mining pool, it goes. I open Btb wallet and almost immediately jumps on using the 9050 port. Does this make any sense?? |
|
|
|
so far - this is what I've got for the wallet:
It's hard to come up with a theme for 'Bitbar'
wow a theme, ya haven't even thought about that before now. Liking the rounded edge buttons! |
|
|
|
What's so cool about Diamond? I thought about getting some but ya, haven't motivated myself.
Network hashrate is really down now on BTB, my hashpower is accounting for pretty close to half of the total. I will hit mad blocks tonight.
I think the price drop has deterred miners because of profitability.
Diamond has been holding it's value, and I can still make a few cents mining them with gpu's (Groestl - not scrypt), but I mentioned diamond because that's what I used for the coin control in the bitbar wallet. BTB hash rate seems about 1/2 of yesterdays. Ispace is around 60 mh, I'm at 30 mh, and Cryptopia is at 90 mh. that totals to around 180 Mh/s and my wallet is reporting total network hash at 219 Mh/s I have about 88Mh on the network solo mining also, I see its down to 205 total now. |
|
|
|
That's impressive.
Assuming you solo mined some of them, is there something special that needs to go into the franko.conf other that the typical info used by other coins?? I cannot get it working even changing to different ports and cgminer says the ip address is dead. But if I change the coin wallet I want to solo mine, like BTB, CSC, CAP, or 42, even using the default port (7913)for Franko they work, just not for Franko. Any ideas?
Which wallet version are you using? Current Version: Franko 0.10.2.2 Found hereI am using the most current version. It's really odd. |
|
|
|
|
What's so cool about Diamond? I thought about getting some but ya, haven't motivated myself.
Network hashrate is really down now on BTB, my hashpower is accounting for pretty close to half of the total. I will hit mad blocks tonight.
I think the price drop has deterred miners because of profitability.
|
|
|
|
- the tool bar buttons have color and rounded corners.
so cute.. lol  |
|
|
|
If you use a program called Recuva you might be able to recover your deleted files. It is freeware without support or 24.95 with support but you don't need support. I used it in a data forensics course, it was a good tool. I also used it to recover some wallet.dat files I lost. https://www.piriform.com/recuva check it out. |
|
|
|
I have Bitbar-master.zip DLed 11/6/15 just sayin.. Dunno if it will help or not.
Na - thanks anyway. I enjoy programming, and the do-over may help me remember to check my backups BEFORE deleting  The next update should have the staking icon to let you know if you are staking, and give a extremely rough guess at how long to wait until you get rewarded. (you have a 50% chance of reward in 3 days) There are no plans for a mandatory wallet update. * mandatory updates are required when changing things like staking time, reward amounts - things that affect transactions going onto the blockchain, the stuff I'm doing is mostly cosmetic, and information about things already on the blockchain. Maybe I will come up with an actual 'plan' - but right now I'm just sort of winging it  My list of 'development' ideas are: coin control (again ) a limited block chain explorer - user select-able color scheme (skins) auto update for windows clients (maybe - I'm still looking into the security risks, this probably won't happen, but maybe) an option to send a percentage of your stake rewards to a charity (like a bitbar fund donation), or 'savings' account (separate wallet ??) That should keep me busy for a while alright so the Bitbar_CC version that can be found on the thread can still be used, correct? |
|
|
|
small update for the bitbar wallet added networkhashps mostly for the pools that are set up to show network hash. No link for windows-qt wallet as of yet. web site http://bitbar.co/source https://github.com/Crypto-Currency/Bitbar/ *EDIT* windows qt wallet links are now up on our web site and github not sure whats going on but i don't see coin control in the new windows version also not sure what the new update is exactly I also just realized i was running a 4.3.008 version. I lost all my current work when I switched work stations. I pushed my updates to github, then I rebuilt my work environment (virtual box) and did a pull from github, and opps, I lost all my work and have to basically start over. Even my backup was screwed, some of the new edits went missing when I zipped the directory 'for safe keeping' I thought I had one more backup on my own personal github depo - but nooooo -- Anyway - the update is basically for the exchanges and pools. I added an api call so they can get a guesstimate of the total network hash to display. in the console you can type getmininginfo and get back something like : "networkhashps" : 374237612 which is 374 Mh The wallet has some color added to it and a bitbar logo, but I can't remember if the previous version had that or not. I really confused myself, all well - I have Bitbar-master.zip DLed 11/6/15 just sayin.. Dunno if it will help or not. |
|
|
|
small update for the bitbar wallet added networkhashps mostly for the pools that are set up to show network hash. No link for windows-qt wallet as of yet. web site http://bitbar.co/source https://github.com/Crypto-Currency/Bitbar/ *EDIT* windows qt wallet links are now up on our web site and github not sure whats going on but i don't see coin control in the new windows version also not sure what the new update is exactly I also just realized i was running a 4.3.008 version. |
|
|
|
To anyone inquiring about my Franko stash, I will likely be holding for the near future. Will make a post here if I change my mind.
-PoolMinor
How many FRK do you have? 99516/612531.89912876 = 16% of total supply -PoolMinor That's impressive. Assuming you solo mined some of them, is there something special that needs to go into the franko.conf other that the typical info used by other coins?? I cannot get it working even changing to different ports and cgminer says the ip address is dead. But if I change the coin wallet I want to solo mine, like BTB, CSC, CAP, or 42, even using the default port (7913)for Franko they work, just not for Franko. Any ideas? |
|
|
|
To anyone inquiring about my Franko stash, I will likely be holding for the near future. Will make a post here if I change my mind.
-PoolMinor
How many FRK do you have? |
|
|
|
|
Show Posts
