Dear dcbt, they are not hashing; double checked.
However, when manually a force start command applied such as, ' /opt/miners/sgminer/sgminer --api-listen --config /opt/confs/sgminer.xmr.conf ' it starts.
Pimp is a terrific software and a great helper but i believe for some gpu cards they do not begin automatically.Besides that it is a priceless tool for miners.
I would be very happy if you could share forced start for cfbg.Can they also make a forced start?
|
|
|
Arkadaşlar bu yılı kapatıyoruz.İyi de kazanç sağladık.Bunun bir kısmını ihtiyaç sahibi arkadaşlarla paylaşmak istiyorum.Yardım eden ben ve parada bana ait olduğu için aradığım bazı kriterler olacak, aşağıda maddeleyeceğim.
1)Marmara bölgesinde oturacak. 2)Tam gün işi olmayacak (part-time çalışabilir). 3)Okuyor olacak. 4)Beyaz Türk olacak. 5)Vatana ve millete karşı suç işlememiş olacak. 6)Herhangi bir çıkar grubuna üye olmayacak.Cemaate üye olabilirsiniz, örneğin yahudi cemaati ama Feto,Süleymancı,Mason OLMAMANIZ gerekiyor.Ben içinizi bilemem ancak ben böyle bir arkadaşa yardım etmek istemem.
Duruma göre değerlendirip bir veya iki arkadaşa bir yıllık eğitim harcamaları için burs vereceğim.Adlarını kesinlikle ifşa edilmeyecek, burs alacak arkadaşlardan sabıka kaydı talep edeceğim.Terör ve terör harici suça bulaşmamaları benim için yeterli.
Bu konuda bana lütfen PM atın.
Abuk sabuk yorumlarla uğraşmak istemediğim için konuyu kitliyorum.Mevcut yasa ve düzenlemeleri bilmiyorum şahısların burs vermesinin önünde engel varsa hediye olarak vereceğim.
Herkese şimdiden mutlu yıllar...
|
|
|
4.2: minerfarm tool The minerfarm tool is your agent software. Besides talking with the miner.farm server over a fully secured connection, it also allows you to view and manage the miners and provides a basic graphical interface inside the terminal as well as scriptable command line options. The minerfarm tool allows you to: ● Start/stop miners ● Switch mining profiles (which miner and conf you are using to mine) ● Set your miner.farm API keys and Agent name ● Setup miners, confs, and profiles for GPU, CPU, Dual miners, and ASIC miners all at the same time The command minerfarm will launch the interactive agent console program. Use the command minerfarm --help to show the full command and alias listings for the minerfarm tool.
|
|
|
Dear friends, I am neither a mod nor an experienced user of Pimp software. dbct, Melt and Lily are the mods and they are 7/24 at the IRC Channel for help.
I also wanted help on the channel on a similar case.I have edited claymore dual mining and replaced my wallet.
Later, at miner.farm terminal I have chosen the ID.ID1 for the first profile, IDn for the nth terminal.
I also have had the same problem.I have chosen the config file and the program asks for the binary file.Well, as a matter of fact I dunno the correct answer.
A how to do section for the 'edition' and 'mining' with photos will be the answer.
Not a newbie user of Pimp but an experienced Pimp user may share a video.What I recommend is you mention your point of views to mods on the channel.
|
|
|
Hi!I am very much excited to use new version 2.0.
I have recently purchased 10 licences.I thank you for great help on IRC Channel.
Regards.
|
|
|
Thanks to BTC_Istanbul problem solved.
You do not need any modification for 5 card @ windows 10.
I will not lock so people experiencing similar problems can use the info and network.
|
|
|
My OS is Windows 10.
I can not use Pimp since it does not suppor RX 480 AMD cards.
Linux is a good alternative and seems the best option.I am not familiar with Linux.If nochoice I will do it.
Well, to uninstall and install option has been delivered many times.
Unlike the answers the latest catalyst version is not the best.We can discuss it later.
I am running a farm and cloning my ssd s and I have found a malware.
The rigs still work and close down about half an hour later.Very interesting other RX 480 and R9 390X cards work flowless.There is something special to the Asus ROG 8 Gb cards.
I will try Linux by tomorrow if I can not solve the problem.
PS:What is the best remote control pogram for Linux?
|
|
|
Mother Board: H81 BTC pro Risers:6 powered usb risers .. version 3 PSU : 1200 Watt Platinium Server PSU for 4 gepu cards, 1500 watt for five gpu cards CPU :Intel Dual Core 3250 RAM :8 GB, 1800 Mhz HDDs connected to mobo :120 Gb SSD
Wi Fi connection with internet adapter and ethernet Cable
|
|
|
I have done so many things...
I have uninstalled all the drivers with DDU.
I have changed the pci-e bios settings to gen1.
I have reloaded only the driver for GPU.
I have connected GPUs one by one.
Well, it worked for half an hour.With 1 GPU missing (yellow alert).
I have checked all the molex cables, powered risers...Everything seems well.
This situation is valid for my other 9 rigs.
Well, I will try Ubuntu as software.If any suggestions pls feel free to PM.The prize is still valid.
Best Regards
|
|
|
Already done.It was my very first thing to do. It seems to be reasoned by DDU. I will share how I have done ASA I find the solution.
|
|
|
Thanks for the answers.
I will try and give feed back ASAP.
A friend sent a PM to check crossfire setup and close it.It did not work.
I have different versions of powered risers.Risers are not the reason.
I will try your offerings ASAP.
PS:My motherboard is H81 Pro Btc by Asrock.
|
|
|
I'm wondering how you say (from what i understand) that your rig has 5 GPU's? I have Asrock Pro Btc as mobo.
|
|
|
Are all of your cards connected to the same server PSU or you are using 2 different psus , one for MB and cpu and other one for GPU power ? When you said Same for the 10 rigs did you mean that you have 10 completely same rigs and you tried adding this card to every single one of them or what ?
I have HP 1500 watt server PSUs.To feed mother board and one card I also have a corsair CX750 M. I bought 50 cards.I have got 10 pcs of 5 card rigs. Either feeding from server psu or from corsair 4 cards works perfectly.However the fifth one does not work.I can see it at the configuration with a yellow label warning.
|
|
|
Additional info: I use server PSUs for powers.They work without problem for my other rigs.
My ram are ddr3 and 8 gb.
Hard disk is ssd, 120 gb.
High quality risers.
OS is Windows 10, licenced.
No virus protection program enabled.
Virtual memory is set to 16 Gb.
Batchfile is the same for my other rigs which work perfectly.
|
|
|
I own Asus RX 480 ROG 8 gb.My mobo is Asrock H81 and , cpu is 3250 Intel.
I also have R390 nad RX480 reference without problems.However with my new card only 4 of them works but 1 remains .Same for the 10 rigs.Any suggestions?
This situation is valid for 10 rigs.
I offer 0.05 BTC price for the first, valid solution.
|
|
|
I own Asus RX 480 ROG 8 gb.My mobo is Asrock H81 and , cpu is 3250 Intel.
I also have R390 nad RX480 reference without problems.However with my new card only 4 of them works but 1 remains .Same for the 10 rigs.Any suggestions?
|
|
|
I have experienced an ip issue similar to yours.I have downloaded the program ,pimp, to my laptop and later imaged the files and prepared the flash disk.
However, it id not accept the key.
I have just entered the chat and Melt told me that the problem was the 'double ip'.So friend, there must be a command to delete the previous ip and make you define new ip.Do not forget to set the static ip for you rig at the beginning.
What command to delete the ip????I do not know, I am just reading 'how to files'.
|
|
|
Is there a topic for miner.farm? I would very much appreciate some more info about miner.farm's abilities beyond monitoring.
Is there an automatic reboot mail and/or gsm alert ?
|
|
|
|