should the masternodes still have staking turned on? or does this mess it up?
On the same wallet you've got to choose:stake or MN...you can't operate MN and stake |
|
|
|
I can't leave my computer on work all the time ((
That's bad...unfortunately it's necessary not really, if he runs is 1.3 a day, he'l build up stake over the 2/3 day the wallets closed. it wont be 100% takign advantage of everything it could have staked but its better than nothing. and shouldnt be a huge impact on the overall numbers. Yeah..sure..it's true |
|
|
|
I can't leave my computer on work all the time ((
That's bad...unfortunately it's necessary |
|
|
|
But I can't encrypt the wallet and not always close correctly
No problem at all on my side..it's strange Encrypted as usually,closed in 3 sec last version? v1.4.5.0-g32a928e Yeah okay, do without. Tell me how much I need coins and how much time for a simple staking You can stake even with 1 Crave but you'll probably not find a block in a year or so  To begin stake you need to have a coins matured in wallet at least 8 hrs but my knowledge is 1-2 days for full performance. I've got about 14k Crave and getting around 40 Crave a day. Don't worry abot 32/64bit cause 32bit works on 64bit great |
|
|
|
|
I recommend to you all.
Backup your wallet.dat,then erase all about Crave in its folder,then start a new clean wallet,then fully sync,then replace wallet.dat.DONE in 35 mins and working absolutely great
|
|
|
|
But I can't encrypt the wallet and not always close correctly
No problem at all on my side..it's strange Encrypted as usually,closed in 3 sec last version? v1.4.5.0-g32a928e Yeah |
|
|
|
But I can't encrypt the wallet and not always close correctly
No problem at all on my side..it's strange Encrypted as usually,closed in 3 sec |
|
|
|
|
Use these nodes for new wallet release:
addnode=104.131.186.83
addnode=104.131.97.52
addnode=104.156.226.116
addnode=104.209.32.223
addnode=104.236.58.131
addnode=104.238.137.63
addnode=104.238.144.146
addnode=104.238.179.209
addnode=108.61.170.125
addnode=108.61.208.166
addnode=108.61.247.242
addnode=109.80.251.246
addnode=141.239.160.81
addnode=148.251.41.117
addnode=162.220.12.170
addnode=173.199.126.119
addnode=173.245.157.138
addnode=176.118.48.189
addnode=178.33.64.235
addnode=178.42.173.88
addnode=185.58.194.5
addnode=185.92.220.201
addnode=185.92.221.156
addnode=185.92.222.148
addnode=185.92.223.146
addnode=188.40.96.10
addnode=192.99.184.36
addnode=2.96.181.179
addnode=212.8.195.244
addnode=31.63.229.84
addnode=45.55.238.50
addnode=45.58.48.250
addnode=5.44.101.132
addnode=5.9.72.102
addnode=65.28.175.151
addnode=66.168.29.225
addnode=69.118.255.221
addnode=71.84.113.165
addnode=76.125.77.222
addnode=76.90.105.71
addnode=77.247.181.163
addnode=78.186.201.217
addnode=82.238.91.66
addnode=83.157.62.179
addnode=84.193.211.3
addnode=89.3.213.211
addnode=89.46.67.192
addnode=91.134.53.161
addnode=92.12.134.81
addnode=93.89.125.248
addnode=95.211.180.149
addnode=98.235.220.249
|
|
|
|
Updated the x64 Windows wallet link in the first post. This has the sync improvement. Syncs from scratch in about 20-30 minutes. Also disables address index by default, lower cpu use, generally runs better, and has updated checkpoints.
You're great...Thank you very very much  |
|
|
|
I think the easiest solution would be a mandatory update and do blockchain pruning that would cut out those blocks that we can't sync past.
Maybe that's what ICM has in mind already, I don't know..
Uh, no. You are I think misunderstanding why syncing takes awhile. It is not some block that you can't sync past (if that were the case, the network will have stopped). The UI progress bar appears to stall, but it is still sync'ing a ton of data in the background. The overhead of having the address index on all the time is causing it to take a long time. We only need address indexing going if we are running darkpoold. So I put a flag in there to turn it off by default. Hi ICM, no,it's not that. If you download a clean wallet now,open it,you'll wait 1,2,3 days to get past that point and it'll never get. I have tried that many times. The only solution is to download a full blockchain. Yes but the reason is this, which was also an issue in bitcoin: https://github.com/bitcoin/bitcoin/issues/4431This was fixed in Bitcoin Core when they rewrote the entire sync mechanism. Our codebase is not quite close enough to Core to be able to use the entirely new headers first download mechanism with multiple sync nodes. However we can do some things like mentioned in pull request 4431. But the address index is what is causing it to stretch out even longer. I tested it and tested a clean sync from scratch with it turned off. With it turned off by default I can sync the complete chain in something like 8 hours. Which is still long. With some other tweaks I am testing I think we can speed that up more. I haven't really been focused on optimizing the address indexing because darkpool/blur has seen little use so far, so I backburnered it while focusing on the new wallet tech and the markets. One day, we will probably have headers first support which will make sync'ing far less of a headache. There are some proof-of-stake specific challenges that have to get figured out first in order to do headers first though. Ok,thank you. Just do your best  |
|
|
|
I think the easiest solution would be a mandatory update and do blockchain pruning that would cut out those blocks that we can't sync past.
Maybe that's what ICM has in mind already, I don't know..
Uh, no. You are I think misunderstanding why syncing takes awhile. It is not some block that you can't sync past (if that were the case, the network will have stopped). The UI progress bar appears to stall, but it is still sync'ing a ton of data in the background. The overhead of having the address index on all the time is causing it to take a long time. We only need address indexing going if we are running darkpoold. So I put a flag in there to turn it off by default. Hi ICM, no,it's not that. If you download a clean wallet now,open it,you'll wait 1,2,3 days to get past that point and it'll never get. I have tried that many times. The only solution is to download a full blockchain. |
|
|
|
 https://cravefaucet.cf/Thanks to Ratnet.Next stage: Multipool paying out in CRAVE! (jj's working hard on it) If you want to open your own CRAVE faucet please contact with me. Very very nice. I'd like to see these things on the OP. |
|
|
|
I would like to see one of those built on a Radxa, which has built-in Wifi. And a way to setup the wifi over micro-USB interface to a laptop. And a better UI, maybe an app that auto-detects these on the network and shows stats. Something nicer than a basic web page. Maybe integrate a small 2 line LCD panel to show IP address, uptime and stake stats.
I would like to see an update |
|
|
|
- Free @mycrave.org e-mail to early contributers for website fund.
- Those who are contributed will be listed on the webpage and will get Contributer title in forums.
- Anyone who contributes more than 0.05 BTC to the CRAVE Community project funds will recieve both benefits listed above.
- You can also have a mail with the fee of 0.05 BTC directly.
- Half of the funds will go through projects planned below, other half will go to developer industrialcoinmagic.
Projects that I have in mind are: a) Web wallet b) Multipool that pays out in CRAVE c) Payment processors d) Faucet We are waiting for cravetalk.org domain transfer to be done in order to publish the forums. Feel free to contact me for details. Also thanks to jj12880, he fixed the calculator. There is also a CRAVE buy page, take a look at them. Calculator: http://jj12880.azurewebsites.net/cravecalc.aspxBuy CRAVE: http://easycoins.azurewebsites.net/crave/Great!! |
|
|
|
Hi I have problem with my masternode. I configure masternode on my VPS, everything work fine until my masternode get payment. After payment my masternode stop working  I must run this masternode manually. This happend every time Can anyone help me? Hi, it's very strange........do you wait enough to get another payment?.......it's based on luck very much After payment I don't se my masternode on list, before payment masternode is on list. I use config from this forum. Did I need my pc wallet running all time? Maybe my server is to slow? My vps have 2gb ram, cpu 2 cores, 20gb ssd hdd. Of course you need to keep the wallet open all the time Also when I run my masternode on vps? I ask about wallet on my 'local pc'. I see.....well,wait for an answer from some MN operator here...I stake only. Please anybody help to this guy...thanks |
|
|
|
Hi I have problem with my masternode. I configure masternode on my VPS, everything work fine until my masternode get payment. After payment my masternode stop working I must run this masternode manually. This happend every time Can anyone help me? Hi, it's very strange........do you wait enough to get another payment?.......it's based on luck very much After payment I don't se my masternode on list, before payment masternode is on list. I use config from this forum. Did I need my pc wallet running all time? Maybe my server is to slow? My vps have 2gb ram, cpu 2 cores, 20gb ssd hdd. Of course you need to keep the wallet open all the time |
|
|
|
Hi I have problem with my masternode. I configure masternode on my VPS, everything work fine until my masternode get payment. After payment my masternode stop working I must run this masternode manually. This happend every time Can anyone help me? Hi, it's very strange........do you wait enough to get another payment?.......it's based on luck very much |
|
|
|
who is it?   some dirty whale Yeah....I just don't understand why he's not staking at least.I've got something ove 13k and my daily earnings are great just from staking.Much better then my last mining Anyway,he's there long time |
|
|
|
do we have another tread
what? |
|
|
|
|
Show Posts
