If blocks stop being fpund, we have a problem, but I've triple checked and everything seems to be ok network-wise
In what way can we have a problem? Can you be more specific? You iGotSpots are a dev of this coin, we have invested some BTC here and I would like to know exactly what is happening. You should be able to tell us something concrete This is like asking a pilot to explain why the plane is crashing when you hit 3 seconds of turbulence. There is nothing wrong on the network, so there is nothing to report Blocks are being found every few minutes, which means people are staking as normal. If a block is found, someone just staked, so it's obviously still working. I'm not sure what you want me to say, I'm not going to make up an issue and say there is a problem if there's not From what I've seen most of those who reported a problem with the fact that no staking, there are some who have hundreds of thousands of coins. We should be more careful to seek solutions and taking the situation seriously. |
|
|
|
If blocks stop being fpund, we have a problem, but I've triple checked and everything seems to be ok network-wise
In what way can we have a problem? Can you be more specific? You iGotSpots are a dev of this coin, we have invested some BTC here and I would like to know exactly what is happening. You should be able to tell us something concrete |
|
|
|
I've been staking all day. Last block was 2 minutes ago. There are no problems. If there is a problem with your personal staking, the issue is on your end. I'm still staking like normal, as are other people (or blocks would not be found). The network is fine
Staking is just like mining, where you won't always find a block immediately when eligible. You could take a week to stake if you have bad luck, but the amount would be very large due to coinage. I really wish you guys would listen when I tell you over and over that if you don't stake every 24 hours you get a larger amount. The freaking out would drop to a minimum once people realize they get the exact same amount of coins overall, whether they stake once a week or 20 times a day
What you say @iGotSpots seems logical. You say that in 7 days can staking 7 times the value of 7 days. No one has waited until now to staking once every seven days, and what is troubling is that so far nobody has reported so far. We all staked regularly several times a day, not once in a number of days. Safety WILL BE WHEN staking regularly at a certain percentage of the amount of the wallet, as it was until yesterday. I hope everything is only temporary. |
|
|
|
my balls is only 14 days old i have the same problem
my expected time to earn is 5 min and has been for 27 hours now
Oh, that is bad... I suspect we got limited internet access to the network from ours ISP From our ISPs? You mean my own ISP? Don't think so... Edit:  it was just a thought you're probably right Np, it could be true, sure... but naaah...  Just to prevent a conspiracy train...  Some people get in panic fast. (and i don't mean you with this!)  _____________________ Still curious what's going on... my expected time is down to 7hrs now. You are still on 5min.? Did a wallet restart? Anyone here who earned stakes? yes 5 minutes my stage weight is 622194 Crazy... time will tell. Anyone here who earned stakes today? |
|
|
|
i haven't staked in over 24 hours i resent all my coins to my address to reset will report back tomorrow
i have same problem and approx. 15 hours ago I resent all my coins to my address. I will report back in few hours. |
|
|
|
Something is wrong, I am staking but no balls.
Is it only with me, or all over the NETWORK
Post a screenshot. What do you mean, you are staking for 0 coins? Hi @iGotSpots. Something can be wrong. Staking green buton see: "estimated time to earn reward is 8 minutes" but not staked nothing for 6 hours ago. Yesterday my wallet staked about +30 times. I have +250000 coins. My weigh is 405099. Sorry for my english. Please help me! Ignore the arrow; it is inaccurate. If you have staked before, don't do anything different. You only have to move coins once per month to reset coinage and start the cycle over again I stake BALLS about 3, 4 weeks ago. Please explain me: Is necessary to move all coins once per month? This is the problem? Thanks! Yes, move them once a month to ensure you are under the max coinage Thanks @iGotSpots. I try to move coins but do not work. Message is this: "This transaction is over the size limit. You can still send it for fee 108 BALLS which goes to the nodes that process your ...." In my transaction not appear just fee not sume of my coins moved. What happen? This is ok? Sorry but I want understand this. That's a transaction fee. It is destroyed, not passed to nodes. You must pay it if you want to move coins, that is our inflation control Thanks @iGotSpots. Happy Holidays! |
|
|
|
Something is wrong, I am staking but no balls.
Is it only with me, or all over the NETWORK
Post a screenshot. What do you mean, you are staking for 0 coins? Hi @iGotSpots. Something can be wrong. Staking green buton see: "estimated time to earn reward is 8 minutes" but not staked nothing for 6 hours ago. Yesterday my wallet staked about +30 times. I have +250000 coins. My weigh is 405099. Sorry for my english. Please help me! Ignore the arrow; it is inaccurate. If you have staked before, don't do anything different. You only have to move coins once per month to reset coinage and start the cycle over again I stake BALLS about 3, 4 weeks ago. Please explain me: Is necessary to move all coins once per month? This is the problem? Thanks! Yes, move them once a month to ensure you are under the max coinage Thanks @iGotSpots. I try to move coins but do not work. Message is this: "This transaction is over the size limit. You can still send it for fee 108 BALLS which goes to the nodes that process your ...." In my transaction not appear just fee not sume of my coins moved. What happen? This is ok? Sorry but I want understand this. |
|
|
|
Something is wrong, I am staking but no balls.
Is it only with me, or all over the NETWORK
Post a screenshot. What do you mean, you are staking for 0 coins? Hi @iGotSpots. Something can be wrong. Staking green buton see: "estimated time to earn reward is 8 minutes" but not staked nothing for 6 hours ago. Yesterday my wallet staked about +30 times. I have +250000 coins. My weigh is 405099. Sorry for my english. Please help me! Ignore the arrow; it is inaccurate. If you have staked before, don't do anything different. You only have to move coins once per month to reset coinage and start the cycle over again I stake BALLS about 3, 4 weeks ago. Please explain me: Is necessary to move all coins once per month? This is the problem? Thanks! |
|
|
|
Something is wrong, I am staking but no balls.
Is it only with me, or all over the NETWORK
Post a screenshot. What do you mean, you are staking for 0 coins? Hi @iGotSpots. Something can be wrong. Staking green buton see: "estimated time to earn reward is 8 minutes" but not staked nothing for 6 hours ago. Yesterday my wallet staked about +30 times. I have +250000 coins. My weigh is 405099. Sorry for my english. Please help me! |
|
|
|
Any nodes for this coin. Wallet won't sync.
Wallet won't sync. getpeerinfo
13:25:27
[
{
"addr" : "46.165.209.144:62831",
"services" : "00000001",
"lastsend" : 1419272711,
"lastrecv" : 1419272681,
"conntime" : 1419272653,
"version" : 131422,
"subver" : "/Mewning:1.3.2.2/",
"inbound" : false,
"startingheight" : 19484,
"banscore" : 0
},
{
"addr" : "24.67.29.246:62831",
"services" : "00000001",
"lastsend" : 1419272711,
"lastrecv" : 1419272711,
"conntime" : 1419272665,
"version" : 131422,
"subver" : "/Mewning:1.3.2.2/",
"inbound" : false,
"startingheight" : 19484,
"banscore" : 0
},
{
"addr" : "71.188.55.212:62831",
"services" : "00000001",
"lastsend" : 1419272712,
"lastrecv" : 1419272713,
"conntime" : 1419272682,
"version" : 131422,
"subver" : "/Mewning:1.3.2.2/",
"inbound" : false,
"startingheight" : 19484,
"banscore" : 0
},
{
"addr" : "67.215.11.195:62831",
"services" : "00000001",
"lastsend" : 1419272711,
"lastrecv" : 1419272713,
"conntime" : 1419272688,
"version" : 131422,
"subver" : "/Mewning:1.3.2.3/",
"inbound" : false,
"startingheight" : 19484,
"banscore" : 0
},
{
"addr" : "84.125.186.16:62831",
"services" : "00000001",
"lastsend" : 1419272712,
"lastrecv" : 1419272712,
"conntime" : 1419272705,
"version" : 131422,
"subver" : "/Mewning:1.3.2.2/",
"inbound" : false,
"startingheight" : 19484,
"banscore" : 0
}
]
Please explain me how I fix this wallet sync problem. Thx you have to make a config file and put the following lines addnode = 46.165.209.144:62831 addnode = 71.188.55.212:62831 addnode = 24.67.29.246:62831 Thx. Don't work. Please explain me how I name .conf file? on windows you go to the directory with the wallet.dat file. make a text document and put that info in. then save it as mewn.conf Thx Mcdoom432. I follow your steps. In mewn folder I create a new file, I put this 3 lines: addnode = 46.165.209.144:62831 addnode = 71.188.55.212:62831 addnode = 24.67.29.246:62831 I saved mewn.conf but wallet won't sync. Make sure when you save it you change the save as type to All files I change it in "save as" all files type, but don't work anyway. Sorry that's what worked for me. Wish I could help more. good luck  Thanks! Good Luck! |
|
|
|
Any nodes for this coin. Wallet won't sync.
Wallet won't sync. getpeerinfo
13:25:27
[
{
"addr" : "46.165.209.144:62831",
"services" : "00000001",
"lastsend" : 1419272711,
"lastrecv" : 1419272681,
"conntime" : 1419272653,
"version" : 131422,
"subver" : "/Mewning:1.3.2.2/",
"inbound" : false,
"startingheight" : 19484,
"banscore" : 0
},
{
"addr" : "24.67.29.246:62831",
"services" : "00000001",
"lastsend" : 1419272711,
"lastrecv" : 1419272711,
"conntime" : 1419272665,
"version" : 131422,
"subver" : "/Mewning:1.3.2.2/",
"inbound" : false,
"startingheight" : 19484,
"banscore" : 0
},
{
"addr" : "71.188.55.212:62831",
"services" : "00000001",
"lastsend" : 1419272712,
"lastrecv" : 1419272713,
"conntime" : 1419272682,
"version" : 131422,
"subver" : "/Mewning:1.3.2.2/",
"inbound" : false,
"startingheight" : 19484,
"banscore" : 0
},
{
"addr" : "67.215.11.195:62831",
"services" : "00000001",
"lastsend" : 1419272711,
"lastrecv" : 1419272713,
"conntime" : 1419272688,
"version" : 131422,
"subver" : "/Mewning:1.3.2.3/",
"inbound" : false,
"startingheight" : 19484,
"banscore" : 0
},
{
"addr" : "84.125.186.16:62831",
"services" : "00000001",
"lastsend" : 1419272712,
"lastrecv" : 1419272712,
"conntime" : 1419272705,
"version" : 131422,
"subver" : "/Mewning:1.3.2.2/",
"inbound" : false,
"startingheight" : 19484,
"banscore" : 0
}
]
Please explain me how I fix this wallet sync problem. Thx you have to make a config file and put the following lines addnode = 46.165.209.144:62831 addnode = 71.188.55.212:62831 addnode = 24.67.29.246:62831 Thx. Don't work. Please explain me how I name .conf file? on windows you go to the directory with the wallet.dat file. make a text document and put that info in. then save it as mewn.conf Thx Mcdoom432. I follow your steps. In mewn folder I create a new file, I put this 3 lines: addnode = 46.165.209.144:62831 addnode = 71.188.55.212:62831 addnode = 24.67.29.246:62831 I saved mewn.conf but wallet won't sync. Make sure when you save it you change the save as type to All files I change it in "save as" all files type, but don't work anyway. |
|
|
|
Any nodes for this coin. Wallet won't sync.
Wallet won't sync. getpeerinfo
13:25:27
[
{
"addr" : "46.165.209.144:62831",
"services" : "00000001",
"lastsend" : 1419272711,
"lastrecv" : 1419272681,
"conntime" : 1419272653,
"version" : 131422,
"subver" : "/Mewning:1.3.2.2/",
"inbound" : false,
"startingheight" : 19484,
"banscore" : 0
},
{
"addr" : "24.67.29.246:62831",
"services" : "00000001",
"lastsend" : 1419272711,
"lastrecv" : 1419272711,
"conntime" : 1419272665,
"version" : 131422,
"subver" : "/Mewning:1.3.2.2/",
"inbound" : false,
"startingheight" : 19484,
"banscore" : 0
},
{
"addr" : "71.188.55.212:62831",
"services" : "00000001",
"lastsend" : 1419272712,
"lastrecv" : 1419272713,
"conntime" : 1419272682,
"version" : 131422,
"subver" : "/Mewning:1.3.2.2/",
"inbound" : false,
"startingheight" : 19484,
"banscore" : 0
},
{
"addr" : "67.215.11.195:62831",
"services" : "00000001",
"lastsend" : 1419272711,
"lastrecv" : 1419272713,
"conntime" : 1419272688,
"version" : 131422,
"subver" : "/Mewning:1.3.2.3/",
"inbound" : false,
"startingheight" : 19484,
"banscore" : 0
},
{
"addr" : "84.125.186.16:62831",
"services" : "00000001",
"lastsend" : 1419272712,
"lastrecv" : 1419272712,
"conntime" : 1419272705,
"version" : 131422,
"subver" : "/Mewning:1.3.2.2/",
"inbound" : false,
"startingheight" : 19484,
"banscore" : 0
}
]
Please explain me how I fix this wallet sync problem. Thx you have to make a config file and put the following lines addnode = 46.165.209.144:62831 addnode = 71.188.55.212:62831 addnode = 24.67.29.246:62831 Thx. Don't work. Please explain me how I name .conf file? on windows you go to the directory with the wallet.dat file. make a text document and put that info in. then save it as mewn.conf Thx Mcdoom432. I follow your steps. In mewn folder I create a new file, I put this 3 lines: addnode = 46.165.209.144:62831 addnode = 71.188.55.212:62831 addnode = 24.67.29.246:62831 I saved mewn.conf but wallet won't sync. |
|
|
|
Any nodes for this coin. Wallet won't sync.
Wallet won't sync. getpeerinfo
13:25:27
[
{
"addr" : "46.165.209.144:62831",
"services" : "00000001",
"lastsend" : 1419272711,
"lastrecv" : 1419272681,
"conntime" : 1419272653,
"version" : 131422,
"subver" : "/Mewning:1.3.2.2/",
"inbound" : false,
"startingheight" : 19484,
"banscore" : 0
},
{
"addr" : "24.67.29.246:62831",
"services" : "00000001",
"lastsend" : 1419272711,
"lastrecv" : 1419272711,
"conntime" : 1419272665,
"version" : 131422,
"subver" : "/Mewning:1.3.2.2/",
"inbound" : false,
"startingheight" : 19484,
"banscore" : 0
},
{
"addr" : "71.188.55.212:62831",
"services" : "00000001",
"lastsend" : 1419272712,
"lastrecv" : 1419272713,
"conntime" : 1419272682,
"version" : 131422,
"subver" : "/Mewning:1.3.2.2/",
"inbound" : false,
"startingheight" : 19484,
"banscore" : 0
},
{
"addr" : "67.215.11.195:62831",
"services" : "00000001",
"lastsend" : 1419272711,
"lastrecv" : 1419272713,
"conntime" : 1419272688,
"version" : 131422,
"subver" : "/Mewning:1.3.2.3/",
"inbound" : false,
"startingheight" : 19484,
"banscore" : 0
},
{
"addr" : "84.125.186.16:62831",
"services" : "00000001",
"lastsend" : 1419272712,
"lastrecv" : 1419272712,
"conntime" : 1419272705,
"version" : 131422,
"subver" : "/Mewning:1.3.2.2/",
"inbound" : false,
"startingheight" : 19484,
"banscore" : 0
}
]
Please explain me how I fix this wallet sync problem. Thx you have to make a config file and put the following lines addnode = 46.165.209.144:62831 addnode = 71.188.55.212:62831 addnode = 24.67.29.246:62831 Thx. Don't work. Please explain me how I name .conf file? |
|
|
|
Any nodes for this coin. Wallet won't sync.
Wallet won't sync. getpeerinfo
13:25:27
[
{
"addr" : "46.165.209.144:62831",
"services" : "00000001",
"lastsend" : 1419272711,
"lastrecv" : 1419272681,
"conntime" : 1419272653,
"version" : 131422,
"subver" : "/Mewning:1.3.2.2/",
"inbound" : false,
"startingheight" : 19484,
"banscore" : 0
},
{
"addr" : "24.67.29.246:62831",
"services" : "00000001",
"lastsend" : 1419272711,
"lastrecv" : 1419272711,
"conntime" : 1419272665,
"version" : 131422,
"subver" : "/Mewning:1.3.2.2/",
"inbound" : false,
"startingheight" : 19484,
"banscore" : 0
},
{
"addr" : "71.188.55.212:62831",
"services" : "00000001",
"lastsend" : 1419272712,
"lastrecv" : 1419272713,
"conntime" : 1419272682,
"version" : 131422,
"subver" : "/Mewning:1.3.2.2/",
"inbound" : false,
"startingheight" : 19484,
"banscore" : 0
},
{
"addr" : "67.215.11.195:62831",
"services" : "00000001",
"lastsend" : 1419272711,
"lastrecv" : 1419272713,
"conntime" : 1419272688,
"version" : 131422,
"subver" : "/Mewning:1.3.2.3/",
"inbound" : false,
"startingheight" : 19484,
"banscore" : 0
},
{
"addr" : "84.125.186.16:62831",
"services" : "00000001",
"lastsend" : 1419272712,
"lastrecv" : 1419272712,
"conntime" : 1419272705,
"version" : 131422,
"subver" : "/Mewning:1.3.2.2/",
"inbound" : false,
"startingheight" : 19484,
"banscore" : 0
}
]
Please explain me how I fix this wallet sync problem. Thx |
|
|
|
Any nodes for this coin. Wallet won't sync.
Wallet won't sync. |
|
|
|
What the fuck...
Welcome back, we've missed you too!  Welcome back iGotSpots |
|
|
|
From experience I've tested PoS in with the following coins: LAT(Minting), PND, RDD and now Asia Coin.
In each wallet I have a certain amount of coins in LAT 25, PND 20k, RDD(well PosV) 200k and Asia Coin 13k.
1. LAT. In LAT I first left my laptop on for 8 hours because the official website stated it. So I did and 25 LAT amount got bigger but didn't pass 25 LAT.
2. PND. In PND I allow it to sync with its network and the 20k PND grew to over 20k. It still says PoS will be finished in 5000 years.
3. RDD. In RDD I allow it to sync(which took forever) finally after 10 hours interest accumulated and now over 200k
4. Asia Coin. In Asia Coin I did same thing like other three but this one gave me about 50% interest. They stated on their website 100% PoSV and after that it dwindles down.
I haven't tired BC, NXT or other PoS coins I will continue with my experiment.
Also see HYP - 750% /Year, and BALLS +1000% /Year, high POS interest |
|
|
|
The dev can't post on here at the moment. He's on twitter @purePOS and in the IRC channel though.
yes this is how i speak with him I do not know much about dev, but BALLS increased in 24 hours over 80% on poloniex. It's only about 380 sat, but it can be in 1000 sat, in a few days. |
|
|
|
dev gone?
It is very bad that devs have no reaction. |
|
|
|
|
Show Posts
