2.3 GH/s Full set Technobit NanoFury USB bitcoin miner
* Final product will be a fully assembled and working board. There will be no (plastic) housing or heatsink as those just increase the price. At the announced hashing rate the board should not need any additional heatsink or cooling.
Technical details
* No external power supply is required as the board is USB2.0-powered. If you want to run multiple units via a powered external USB hub you’ll need to get that separately. Powered USB hub is not included in this GB.
* For the same reason the hashing rate will be limited to about 2.3GH/s. (This is because the device can draw no more than 500mA from a standard USB 2.0 port). At this point we estimate that we should be able to achieve roughly 2GH with those power constraints, even though the chips have demonstrated up to 3.2GH/s. It is also possible that due to those limitations we may have to run the chips at a slightly slower hashing speeds , which on the good side will be controlled via software (cgminer) and depending on your specific USB hub you might be able to squeeze out a few more hashes.
* Overclocking: the board does permit some overclocking (with hardware modifications - see also “pencil mod”). Be aware though that if this exceeds the limits of your USB port your computer may just turn off the port completely. Also, with increase of speed you will get more heat. The chip and board is designed to use the back side as a heatsink, but if that’s not enough you may have to add an additional heatsink.
el chip en cuestion es este pero no pone si va con chip o si no va con chip solo que es completo y no se si alguien a comprado este usb por que les e enviado 10 correos y ni contestan espero que alguno por su amabilidad me confirme que son listo para conectar y minar gracias de nuevo