|
seems like more sustainable practice to not risk buying it and maybe getting scammed
i'll probably buy some batch2 if it's proven real by community
|
|
|
|
|
What exchange is working with the mainnet coins for us citizens? I've tried a bunch listed on coinmarketcap and they either don't accept us citizens or only accept erc20 tokens and not the main net coins. so frustrating
|
|
|
|
|
What exchange is working with the mainnet coins for us citizens? I've tried a bunch listed on coinmarketcap and they either don't accept us citizens or only accept erc20 tokens and not the main net coins. so frustrating
|
|
|
|
I seem to be getting best Vega 56 hash rates with intensity=10 for Hynix memory and intensity=7 for Samsung memory.
In other words leaving Samsung at default 7 (higher intensity drops hash rate), max intensity for Hynix improves it by about 50-100 H/s.
Driver v18.5.1 seems to drop my hash rates by about 100 H/s for all cards compared to v18.4.1.
Anyone else getting same results?
Anyone else compare 18.5.1 driver hashrate to 18.4.1? |
|
|
|
When I try to add my wallet BTM to the antpool settings. This message appears: Please input correct BTM wallet address
I already tried to add the wallet bibox and rightbtc.
Can someone help me?
you need to show how you doing it so we can tell what is right and what is wrong. Try to take a screen shot I was able to add the gate.io wallet. The other wallets started with 0x, so antpool would not accept. Just what I was looking for. Thanks |
|
|
|
Im getting errors about missing DLLs:
VCRUNTIME140D.dll
ucrtbased.dll
MSVCP140D.dll
I have basically all MS VC++ redistributables installed (from 2005 thru 2017). But since there is a D in the end of the file, i have the suspicion that these are debug-dlls. Any idea?
Yeah this is the same errors I got Good luck JK! |
|
|
|
|
I get some errors when I try to start this.. the normal dev fee release works fine though
|
|
|
|
|
Completely sold out, I apologize for not updating the thread in proper timing
|
|
|
|
|
For modding the bios for memory strap timings, what is recommended? I used to use custom memory strap timings for eth for 470s and 480s but never looked into memory strap timings for cryptonight
|
|
|
|
With undervolting you can get power consumption down below 35W with the 550/560.
I have my 560's undervolted to 910 mV and they only draw 32W each. Clocked at ~1200/2160. 535 H/s with xmr-stak and 505 H/s with Claymore. But I use Claymore despite the lower hashrate because it seems to be more efficient at finding shares.
A tip with these cards when mining Cryptonight: Most of the time the highest stable memory clock is not optimal. The proper way to judge the optimal memory clock is by how well the card finds shares. For instance if your max stable memory clock is 2100, you might want to try underclocking to 2090/2080/2070 and watch to see the point where the card starts finding the most shares.
550 looks cheaper than 560.. they both hash the same h/s with cryptonight and have the same power draw? any reason to get 560 over 550? 560 2gb is pretty cheap and superior to all 550's for mining Ethash coins with small DAG size. Most 560's will do ~15-16 MH/s and 550's only ~12-13 MH/s. I have my 560 2gb cards mining EXP (expanse) it's very good because of low difficulty and stable coin price. I use MPH and auto-exchange it, but only when the price on the bigger coins dip. What about cryptonight algo? I'm wondering the optimum hashrate vs power consumption of 550 vs 560 |
|
|
|
With undervolting you can get power consumption down below 35W with the 550/560.
I have my 560's undervolted to 910 mV and they only draw 32W each. Clocked at ~1200/2160. 535 H/s with xmr-stak and 505 H/s with Claymore. But I use Claymore despite the lower hashrate because it seems to be more efficient at finding shares.
A tip with these cards when mining Cryptonight: Most of the time the highest stable memory clock is not optimal. The proper way to judge the optimal memory clock is by how well the card finds shares. For instance if your max stable memory clock is 2100, you might want to try underclocking to 2090/2080/2070 and watch to see the point where the card starts finding the most shares.
550 looks cheaper than 560.. they both hash the same h/s with cryptonight and have the same power draw? any reason to get 560 over 550? |
|
|
|
|
How does rx 550 compare to 560 for ROI and hash per power consumption?
|
|
|
|
|
How do uncles work on this pool? Is it like a miner (single eth deposit address) with 5mhs has the same chance to get x uncles per day as a miner with 5ghs has to get x uncles per day?
|
|
|
|
hi all....please help
im still mining decred in luxor pool by baikal b ,,,,is it better to mine lby or pascal ...if yes ..which pool plz ....
Idk if it is the most profitable but I'm mining pascalcoin on nanopool |
|
|
|
Wow that's way more than my D9 was hashing on luxor.. are you using the default firmware? |
|
|
|
Hopefully, hashing rate will become more stable soon. I think we can anticipate another reduction in around 8 days, to leave us mining around 30 coins per day. If Bitmain then release another batch so after that, it will really impact on earnings, and may affect the trust early adopters have in Bitmain.
If the coin value increases, it may somewhat compensate for the lowering coin return.
For those still waiting fir their first batch miner, did you use DHL?
I have my batch 1 miner and used DHL, but got it like on a monday when some people got theirs early on the friday before that.. I think some of the people that got theirs on friday used UPS |
|
|
|
|
I've been waiting too. I don't think he's doing any deals at the moment, he said days ago he's waiting to figure out the account hacking and everything.. I might just order from Baikal directly
|
|
|
|
|
EDIT: Everything is sold out
Can get pics if needed. Accepting escrow but not necessary. Looking for offers. Offering slight bulk discounts
I also have some random 470/480 4gb non-reference I'm willing to sell, about 6 of these random ones total (I can check for exact models upon request)
All of these have custom modded bios, with only the memory strap timings modded.. able to get 29-30+ mhs with 2000-2100 mem clocks (varies per gpu). I can reflash them to original bios if desired. The 480s come default with 4gb but since they are the original reference 480s, you can bios flash them to unlock 8gb
470 - $200
480 - $225
|
|
|
|
|
If we know the network difficulty is 160,077,945, how can we calculate how much BTM can be mined per day by 780h/s?
|
|
|
|
|
Show Posts
