So has crypto832 replied with the tracking from last night

No he has not.  So do I still have the funds  and if he really shipped it would he be paid

https://www.blockchain.com/en/btc/address/146UJM5kgzLVUV23CXCf33KQKHckoX1gx3

yes the funds are here.

 So I will wait a bit longer. smoothyvo has been patient.  Thank you for that.



At crypto832  if you are this unlucky in life and tons of shit happened to you I am sorry.  But I have never called you out as a scammer.

Yet  in a pm today you wrote you were scammed shipping.  Well how is that if you had shipped yesterday you could show it is on its way.

 and You would get the coins when it arrived.

I went the extra mile to give you the chance to show you are a good decent seller.

You still have time to show that monday date for the shipping.  As I will hold funds just a bit longer.












A Complete aside escrow work sucks.

I escrowed about 5000 usd in 3 escrows .  the last 10-15 days  my fees were 75 bucks.  once I did test sends I spent about 10 or 15 of  that 75 bucks  so a net of say 60 usd for me.   I have written more then 50 pm's for these escrows  they still are not finished. and if you look above you will see when I almost f'd up and listed wrong refund address there was no one either buyer or seller   saying hey phil  you mixed  refund address of buyer with seller's payment address.

I caught that before the  tester send  which is why I send a tester send  since it is only 7 or 8 bucks.  Once I do this and I am confirmed I send rest of coin.

At times I feel  25% of the escrows I do are simply done by a scammer trying to tire me out and get me to stop escrowing.  Thus allowing scammers easier work at scamming.

you can and you will find  that no board will run at 8 volts and do 700 mhz

I don't know how much  gpu clocks you have done  but some clocks and you  crash.

so on braiins  os

the range for each board is 7.9, 8.0, 8.1,8.2... up to 9.4  it is 16 different settings.

and freq  is  like 300 ,325 ,350 to 725

you can set each  board separate.  with volts and freq.

So board 01   could be     8.4 volts freq  525  and it does about 85 watts a th and about a hash of 3700

I have 1 braiins in my house  it has 2 boards  I can show you if you wait.

I set board 1 to freq 450 and volts 8.1
I set board 2 to freq 450 and volts 8.1
I hash at 6th
I pull  500 watts at least 60 watts are for the controller and fans

so each board does 220 watts to do 3th.
some screenshots soon.
this is the settings page
you would need to program  the watts per board to pop up based on a base chart you coded in.

ie 8.1 volts  450 freq = 230 watts a board.

wow funny  got to admit lots of good reasons it is funny as I just refunded a tester to you smoothyvo  in the amount of 7 bucks and I still hold the funds.

so if crypto832 is not lying he could send the gear just give us the tracking with yesterday's date that it was accepted and is in the system

here is the pm I just sent out,.  

since i wrote it I can reveal it.

So since I still have enough funds  if crypto832 did ship and it was accepted yesterday just post the proof.
it is why I sent a tiny tester to smoothyvo  just incase your terrible bad luck had continued.

I would have thought that your husband may have taken a turn for the worse, thank god it was just a simple internet failure.

so since funds are still here https://www.blockchain.com/btc/address/146UJM5kgzLVUV23CXCf33KQKHckoX1gx3  please link that tracking I am sure smoothyvo still wants gear.

braiins os allows  freq and volts  to each board separately.

as said above a freq of 500 and volts of 8.0  will give you about 267-270 watts per board.

it varies board to board  but those numbers are close .

you could  set board a to :

7.9 volts and freq 300,325,350,375,400,425,450,475,500,525,550,575,600,625,650,675,700,725,750,775
8.0 volts and freq 300
8.1 volts and freq 300
8.2 volts and freq 300
8.3
8.4
8.5
8.6
8.7
8.8
8.9
9.0
9.1
9.2
9.3
9.4

so board a  has about 16 x 20 = 320  possible watt numbers  some will not work  such as 7.9 volts and freq 775.

so each board can do  320 estimates

3 boards  960 watt numbers on a chart. in your code.

set the boards to say 8.1 volts and freq 500  and your code would say

board a 267-270 watts
board b 267-270 watts
board c 267-270 watts

to do what I say means you need   to test watts on a few boards make the chart set it to code .  this works and would be within 10% of real number for each board if you did  10 boards 320 setting each  you would be pretty accurate.

it would not be true but close.
and it would be a good reference for a miner to use.

Added k21000

13th for this drawing I will do it weds night.

It will be second of seven drawings.

If you I need 2 things an address to send it to and of course proof you purchased one R606

The price is a free compac stick sidehacks first project.

price seems high but maybe i read translation wrong.

62 watts a th is okay for a quiet space heater.

well at the moment it has working firmware for high speed.

low speed firmware is not done has a bug which will not allow the unit to turn on i do get good numbers 68 69 th

I installed power meter and will check it soon

it is 80-84 db

I have a kwatt meter it only does kwatts

I am at 2.02 kwatts if I check in 20 minutes it should read 3.12  that would be 1.1 in ⅓ of an hour or 3300 watts or 3.3 kwatts.

it does AROUND 68.5 TH

P20 PSU READS 3350 WATTS

locked this thread.  check out the other one.

https://bitcointalk.org/index.php?topic=5120959.0

and it is 8:13 pm with no shipping notice from Crypto832.

So This is canceled and I am refunding the coins in the morning of tuesday june 11th 2019 at 8-10am eastern standard time.

Seller had long enough to ship.
I posted this first and will attach this to both the buyer and seller via pm.

Can not do long holds like this for many reasons.

So this is cancelled I was good enough to extend it and seller failed again.

to the seller don't post shipping 5 minutes after I post this.

it will allow me to do testing in house before I bring to clifton nj

and i will be able to go well over 3000 watts with no issues.

The m20 is in the house doing its tuning

and it is up doing 69 th



Multiple issues abound.
I could not find it on my d-link router. Address of that router is 192.168.0.1  I have 20 pieces of gear on it.

Must be a conflict I moved it to my trendnet router

Address 192.168.10.1

Put a pc on it and found the gear.

other issue is  it has a firmware error for low speed  only runs high speed.

low speed generates error 201 p20 not found in cgminer.

@ frodo can you merge my thread into this one.

https://bitcointalk.org/index.php?topic=5126286.0

i just locked it.

so this gear is loud 80-84 db

not super high pitched but loud.

it only runs full speed.

I had an issue with my router d-link router 192.168.0.1

but my trend net router 192.168.10.1  was fine  as  i only have 1 pc 1 miner 1 router on it  so no conflicts.

seems to run at 68.8 th temps are 72 c

will give a power readout.

very soon.

2.02   kwatts
3.17   kwatts
1.15    kwatts in 20 minutes test  x 3 = 3.45  kwatt or 3,450 watts   so 3450/68900 = 50.07 watts a th.

tired will be shut this off due to noise will do a movie or 2 on it.

This is complex call  to say it is better then the s17 or worse since I don't have working slow speed firmware.

my new  meter does kwatts

I am doing a 1 hour test.

I was at 6.06 kwatts
after 1 hour I am at  9.43 kwatts

that is 3.370  or 3370/68.6 = 49.12 watts a gh  which is close to last nights test of 50.007  watts a th

here is a gui screenshot  68.6th



this is too long of a post

here is a youtube link for unboxing

your video can be found at https://youtu.be/wpyIHm9Z6BE

here it is up and running it is set into a sound proof setup so you do not get to see a good view of it in this video

Your video will be live at: https://youtu.be/jnkELiOSYu4

I am back  and still waiting for the gear.

I can confirm philipma1957laptop is an alt I made today.

that meter has a kit




I will build my own case for it down the road.

I have lots of low end kwatt meters that do about 1800-2000 watts.  kill-a-watt will measure to 1800 watts for an hour or two but not 24/7/365

I saw that meter on ebay but I want a meter today and the one I purchased will come today.

It also has a good kit which I will buy later to house it in its own case.

I actually plan to   use the meter

to this panel



to 2 l30r

and measure up to 48-50 amps.

that is a later project

At the moment my t17s are delayed.
My t3t 39th is in a mystery status. Maybe July maybe August.
The m20 arrives today about a 27 day delay.
And I am dealing with the one bad m10 so in general all my new gear has been a pita to get on time.

It is on the truck for delivery today

I think international sales have started.

Well bitmain’s s17 can do 38watts a th that is a big money maker.

Bitmain has 4 cent power and they would be crazy to not have built some solar fields as well.

4 cent power is about 2.50 usd a day for this machine which is earning  0.00003520 for 1 th.

That is  0.00176 btc a day or 12.50 usd so it makes 10 dollars a day for them.

They preordered out until sept.  Which means. They sold the machine twice.

Ie they build it with your preorder money then mine it till it earns what you already paid them.

It is why I really resist long preorders as much as possible.

You get a 95 day old machine they dip,clean and swap the fans.

So those 1700 usd preorders make more like 2700 for them.

This is not going to be escrowed by me as seller wants

gold
bank transfer or
Usd cash.

I do escrow in

BTC
LTC
as a rule.

Sometimes ETH or BCH

Okay this solves my question.

Okay was not looking for this to be the flaw it just was  looking weird to me.


My original thought is:

Last say a post is a year old is edited today.  Shows  as edited with today’s date.
Then this post is worthless for ban evidence correct?

So scumbags can simply use all edited posts to copy and paste?

Or am I missing something?

Look at my posts all were edited yet first two did not show.


I can duplicate this.

I think.




This edit is with an iPad mini 5 iOS 12.3.1

It will show

yeah  I get that  but  note  my  two posts above I am trying to demo the problem.  Should take a bit of time to show what  I am attempting to do.

also I am not sure if this demo works in meta section.  I may need to do it in a normal section.


Well what do you know I did find a flaw on my end

All these Edits don’t show for meta on my Mac mini or on my iPad

Which means either something is wrong on my end as edits don’t pop up or. Meta edits are hidden?

That seems wrong.

Btw was not looking for it.
All my posts on this thread have multiple edits. And I can not show them on my iPad or my Mac mini.