The point is that Etherum is worth $ 1,590,652,810, and million of dollars are given out the miners every day. (estimated $500 000 000 worth of GPU's mining)
Monacoin (lyra2v2 ) is worth $ 2,122,648
Vertcoin (lyra2v2) is worth $ 873,020
and
LyraBar
Verge
Unitus
MobileCash
Zoom
are worth pennies. So even if the 1080 is the fastest card to mine lyra2v2( shitcoins) , it is slow in etherum (This is where the money is right now).
What is the profit on ETHER for the 980ti and 970 sp? thx |
|
|
|
I remember trying using the commands to force P state... and each time i tried it my PC crashed just as if I has tried to overclock the mem or gpu too much....
If I get the urge, ill give it another shot....
But honestly, even in P2, my hashrates as seen on my normalization aren't that bad.... I would have to uncork the intensity settings I have set.
Yes that's right you just jarred my memory :-) ... really I have to give it a try again ...but like you said... the intensity settings may have to be changed...I think. FYI intensity wont modify p state... in case you are thinking that... but I have intensity backed off so my machine will still play videos/games while mining. Yes I know... but the ccminer app for an algo sometimes needs an -i setting so it won't crash. |
|
|
|
I remember trying using the commands to force P state... and each time i tried it my PC crashed just as if I has tried to overclock the mem or gpu too much....
If I get the urge, ill give it another shot....
But honestly, even in P2, my hashrates as seen on my normalization aren't that bad.... I would have to uncork the intensity settings I have set.
Yes that's right you just jarred my memory :-) ... really I have to give it a try again ...but like you said... the intensity settings may have to be changed...I think. |
|
|
|
|
Thx
Here is something I copied and pasted from a thread for windows desktop.
I use this but with my one rig that doesn't have enough psu keeps crashing ..I have to keep the cards as is p2 state mining and p8 state at idle. Never able to oc the mem until I sli 2 psu's...It just came in the mail will try out tomorrow.
>quite a lot actually, because it is possible to oc the mem clock beyond nominal value, I use this command nvidia-smi.exe -i 0,1 -ac 3506,1506 (where i is the card number and ac the highest clock possible) this force the card to run in state 0
This has been posted here before:
1) open cmd.exe with the admin privileges
2) cd C:\Program Files\NVIDIA Corporation\NVSMI
3) nvidia-smi -q -d SUPPORTED_CLOCKS -i 0
4) nvidia-smi -ac 350X,14XX -i 0 (where 350X is that very first number printed after supported clocks-memory and 14XX one of those numbers printed after graphics
nvidia-smi -ac 3505,1455 -i 0
nvidia-smi -ac 3505,1455 -i 2
nvidia-smi -ac 350X,14XX -i 0,1,2,3,4... for multiple cards.
nvidia-smi -ac 3505,1455 -i 0,2<
|
|
|
|
JaredKaragen I noticed on github you where updating the pool and getting things related to the pool and seeing cards at there pstate. Question is ... is there a way to get the high end nvidia cards like the 980ti 970 gtx to " permanently " stay in the p0 state no matter what...like a crash or reboot or just idling? Thx Ps I know how to set the cards to the p0 state so I can overclock the memory ... but to keep them there.  I don't understand why nvidia did this..the 750ti stays there. |
|
|
|
Encase your wondering what it looks like.  Tbear, this is exactly what I want but couldn't figure out how to configure! Can you share it please? Sure did you get my pm? |
|
|
|
Yup usewindow : true  |
|
|
|
|
Why don't you start a new coin .... call it jackpotcoin 2 with the same algo?
|
|
|
|
you have to find the code segment where it assembles the whole launch command with path, miner name, arguments, etc. see how it opens the miner app.... if its done from within the JSON file (which I doubt given that's not a standard modifiable variable and something an app would usually handle itself)...
Haha, awesome you found it before I finished my reply.
Kudos!
Yes  Thank you so much. Really appreciate your help.  Now I have to add that to every algo tomorrow. It runs better too that way. Still going to try yours though. Yours will work with windows 8.1 won't it? Why don't you ask Crackfoo to put yours on the OP? Easier to find. |
|
|
|
As I was talking to you.. I saw the use window false and as i was learning MC I didn't understand how to use it so. I finally found it... If we didn't talk about it and I didn't post that part of my file I wouldn't have found it. So I thank you so much for your help. Really much appreciated. |
|
|
|
No no new features .. already built in I think ... plus i see profits everything.
I see... yeah... Im never going to add any API to the batch... that would be a full blown application... but im glad you found the section... It doesn't have the ability you see. They only have the arguements for the miner editable, the rest is hardcoded into the application. Out of my control. I think the call is from inside MC my json file. But I thought there was a way to just monitor ccminer running in a separate window as it looks when running it normally. Forget about MC ok now we have cmd ccminer running ... how to do it with one window running it and one cmd window not running but monitoring it and looking exactly the same?  |
|
|
|
|
KBomba did say he may add a profit calculator some day to it.
|
|
|
|
But what I would like to see and do is have a monitor window with MC that looks like you have a regular cmd window open.
So I have this..or looks like this with the colors difficulty readings ect.
[image snipped]
And MC or your bat file is running. Almost like you have 2 instances running.
You're talking about adding new features to MC, but you can get what you want with the JK script. You can remove /min from all the start commands and get a normal window, or you can leave /min and restore the minimized window anytime you want to monitor. No no new features .. already built in I think ... plus i see profits everything. |
|
|
|
Now mining control is running but ccminer cmd window is not...just displaying.
correct, because from as I understand it, minercontrol launches the miner process and handles it inside it's program container.... I don't think you can get it to display the active output like you want. You might want to talk to them in the minercontrol thread... they would probably know a lot more than I how their app handles it.... Yes thx their gone but this cut doesn't seem to do anything if I set to true..... I'll have to read more of MC thread..maybe there is something in there to show me. Thanks for your help. "arguments": "_APARAM3_ -o stratum+tcp://neoscrypt.usa.nicehash.com:3341 -u _ACCOUNT_._WORKER_ _SPARAM2_ -i 0,13,0" }, { "algo": "lyra2v2", "priceid": "14", "folder": "_APARAM1_", "command": "_APARAM2_", "arguments": "_APARAM3_ -o stratum+tcp://lyra2rev2.usa.nicehash.com:3347 -u _ACCOUNT_._WORKER_ _SPARAM2_ -i 0,15,0", "usewindow": false } |
|
|
|
|
Now mining control is running but ccminer cmd window is not...just displaying.
|
|
|
|
I think the problem is minercontrol wants to be able to control the app, and you would have to modify minercontrol to not launch the app in the background... it may even be launching the miner as a child process.... So I have never used MC before... but im guessing that's how its been working... so if that's the case my batch is only really a replacement for MC, not a supplement.... But Ill do what I can to help. Try this: echo %1 %1 %3 %4 %5 %6 %7 %8 %9 %10 %11 %12 %13 %14 %15 %16 %17 %18 %19 %20
pause as a batch called ccminer.bat in the ccminer directory and see if you can point minercontrol to launch that batch file.. If you can get MC to launch that batch file, it should theoretically show you the command string MC is issuing to the miner.... maybe we can intercept or inject the correct commands that will get you the result you want using MC.... Ok thx I not able to make a good explanation. Windows 8.1 MC can do anything. But I don't know the commands on opening up a cmd window with it. Ok this is what I'm trying to do and see.   |
|
|
|
JaredKaragen I'm going to try your conf file as soon as possible. Thx for that.
But, do you know, or does anyone know how I can monitor any app running ccminer in a separate window that looks just like you opened up ccminer to mine a coin with standard cmd? Thx
I believe the start command does that if you don't specify /MIN. How would I do that plz ... what would be the command for that while MinerControl is running plz. Thx my batch file launches each miner as if you launched it from a separate command... they are just all minimized on the taskbar.... Or am I mistaking what you are trying to do... API should be accessible... but default port is not going to be the same between apps as they will all fight for the same port at the same time. I haven't added a specific API port flag per algo..... you can do this at the end of each algo in the batch after the password if you so desire; using the appropriate flag/setting just like you would intensity from the command line. Since I don't monitor via API; I didn't think of it being an issue. *edit* got un-lazy. Check batch script for update. Added a small retro touch as well. Ok thx JaredKaragen. When I try yours, I'll see if I can get it working. But what I would like to see and do is have a monitor window with MC that looks like you have a regular cmd window open. So I have this..or looks like this with the colors difficulty readings ect.  And MC or your bat file is running. Almost like you have 2 instances running. |
|
|
|
JaredKaragen I'm going to try your conf file as soon as possible. Thx for that.
But, do you know, or does anyone know how I can monitor any app running ccminer in a separate window that looks just like you opened up ccminer to mine a coin with standard cmd? Thx
I believe the start command does that if you don't specify /MIN. How would I do that plz ... what would be the command for that while MinerControl is running plz. Thx |
|
|
|
|
JaredKaragen I'm going to try your conf file as soon as possible. Thx for that.
But, do you know, or does anyone know how I can monitor any app running ccminer in a separate window that looks just like you opened up ccminer to mine a coin with standard cmd? Thx
|
|
|
|
|
Show Posts
