Graph is showing nothing at all for the last 2 hours? ? ?
I assume it is the BTC wallet down for maintenance ? ? ? Ya looks like it.. and no coins are maturing..so graph is showing nothing ...no pending or balance. |
|
|
|
|
Graph is showing nothing at all for the last 2 hours? ? ?
|
|
|
|
Ah what a pity, not blake256 algo anymore ?
It was a communication error between the development team, finally is x11/NeoScrypt algorithm That's a shame....blake256 would be good...now its an AMD gpu only coin. |
|
|
|
DASH is doing great.  |
|
|
|
My whole perspective is to remove all middle steps. Be as close to system level and thus be the least buggy.
Simple batch logic trumps all if you are only using zpool. I personally wasn't wowed by miner control.
Yes JK minercontrol ... to start... the conf file list had errors. And one has to think what works with mc. And the most important is the dynamic switching ...to get that correct ..which is fantastic to me. Because if a algo goes up in value a little it will switch in the time one puts in to switch lets say 15 minutes allowing for spin up. But if an algo goes very high then dynamic switching will down the switch over time from like 15 minutes to 1 minute. One must use Kboma 1.6.5.1 upgrade not the original. If I had only the original then I would have given it up. Big difference between the two. One day I'm going to make a bat file up with the same algo's as mc and see if there is a difference because if not setup correctly one could actually loose profits. Kboma says, I talk to him through Skype, he may make a new upgrade with alot of extra features. I wish I knew how to see a cmd window like you see when mining instead of mc window ... I don't know how to do that because mc monitoring window sucks. Ps I'm still waiting for my legendary to pop up on my name.  |
|
|
|
wow, my machine has really begin to flood the server with benchmarks XD Its that algo switching I guess.
Did you ever have plans to graph or group the results in some ways?
hey JK - have you updated your latest multi-algo scripts for your 980? I want to stretch my 980Ti soon. Thanks Yeah. I'm running everything that's worth running except myr-gr. When I get back home I'll paste the batch code. The only miner app I'm presently using is the above linked cuda 8.0 ccminer. Some algos aren't optimized, but I can live with it. It's an Asus GTX 980 4Gb. The scalar between algos should be pretty close between the 980 and TI. I also modified the batch to launch each miner instance in a separate process all at once; then the server only responds to the port it wants. With this method you don't have to wait for it to cycle through each damned algo every time  That's what minercontrol does... goes straight to the next algo. No delay. But from the profits show on it I should be making much more .. but he splits our hashs to 3 different coins at the same time sometimes. |
|
|
|
Anyone, doing any work on the new X11evo algo at moment?
What coin is that for? Thx |
|
|
|
no problem SP!
tpruvot 1.6.7 cuda 8.0 build
Results :
970+960 Stock clock:
blake 2370
Blake2s 1700
blakecoin 4120
bmw 1077
c11 11.53
decred 2271
deep 32.80
dmd-gr 35.12
fresh 13.66
fugue256 404
groestl 35.35
heavy 42.16
jackpot 20.50
luffa 262
lyra2 2600
lyra2v2 14.33
mjollnir 42.21
myr-gr 55.50
neoscrypt 515
nist5 38.60
penta 91.50
quark 20.45
qubit 17.25
sib 2568
scrypt -jane 558.17
skein 349
skein2 235
s3 33.28
x11 11.36
x13 9055
x15 7900
x17 7900
vanilla 3964
whirlcoin 21.72
whirlpool 21.56
zr5 4725
That quark ... is that on the 970? thx I use that for a reference... sp did good on quark for one. |
|
|
|
actually it make sense, when you use more gpu, the motherboard need additional current, so there is a bit of more consumption for that, and the cpu will work a bit harder, we are not talking about crazy vlaue, but those additional 10-20w are there
there was even an article in cryptoblog saying that
for smi, you need to check the last version, it's pretty accurate, you can do it your test, even another user was surprised when he tried again, recently, and anyway like i've said i've tested with the wattmeter to be sure, and they are around the same
also gpu efficiency matter here, i have the 1500i, which has one of the best efficiency out there, so overall the consumption is lower by few watt because of this
there are many variable that simply can not be ignored, it's not so straightforward like many think
55% tdp, but the first gpu crash it seems, it crashed today, intensity is at default, everyhting at default, minuc oc at +150/+150 on afterburner
The extra current is for the additional GPU. Even if you want to credit system overhead not the GPU for the extra wattage the power is being used for the additional GPU so the 10-20 watts are needed for the GPU. Also PSU efficiency matters, but the efficiency changes with the load. Most PSU have a chart showing peak efficiency. If you have too low of a load on a PSU it can lower efficiency just as much as too high of a load. The 1500i has a chart  So it's the most efficient IF you use 55-60% load. That's pretty much the same with most 80 plus rated PSU I've used dual PSU on one MB, not for efficiency but necessity in the past, but I don't see why it wouldn't increase efficiency by balancing loads on two PSU http://www.ebay.com/itm/NEW-Dual-PSU-Power-Supply-24-Pin-ATX-Motherboard-Adapter-Cable-Mining-Litecoin-/201587699757I don't know what load you're using Amph, wasn't directing that to you just throwing my two satoshi's in on PSU efficiency for mining. SP's thread has become a mining tips thread Yes a mining tips thread its related to the problems I am having with ccminer and psu ect. |
|
|
|
With GPU Pascal ( gtx 1070 - 1080 ) ccminer work on windows 10 in future ? .
Already works fine with win 10 I use 80 build (but not cuda 8 - that gave poor performance results) with following results - 32mhs quark and 16mhs lirare2v for 1080 and 24mhs and 14mhs for 1070 How does it do on neoscrypt ? Thx |
|
|
|
Epsylon3 What exactly does it do? Thx |
|
|
|
whatever you did; the graph is showing a better profitability since the reboots.... for whatever difference it made.... maybe its just luck which will need to average out again....
Yes profitability looks like it did a month ago...good. |
|
|
|
Will be doing a reboot of some servers shortly to apply some tuning improvements and system patches.
Yes I see stratum is down for improvements. waiting for reboot to come back up. It's taking abnormally long unfortunately. bleh of course, it shows an error status from the hosting console. Hang tight. Take you time .. good things take time. |
|
|
|
Will be doing a reboot of some servers shortly to apply some tuning improvements and system patches.
Yes I see stratum is down for improvements. |
|
|
|
I think hes asking if he can mine a specific coin on a soecific algo... like DGB on SHA.... and get paid out in BTC...
am i correct?
yes (with fee?) if possible otherwise in the coin mined To Crackfoo why can't this be done? Or could you set this up to do so in the future? Mining 3 coins or so ect, with the coins having different difficulties, downs the profits? Thx |
|
|
|
Hi tbearhere
question
why do you keep the 750ti there, is insignificant compared to the other ones, and it uses a different compute architecture.
wouldn't be better get rid of it, at least until you solve the issue with the second GTX970 ? which is three times more powerful?
just a thought, 80% of my cards are 750Ti and GTX970, I never ever mixed them, i already have way too many problems with risers, lack of lanes, power limitations, to have to deal with different compute architectures in the same machine hehe.
(EDIT) I just saw the image you posted again, you could disable onboard VGA too, and use the vga on the 16x slot as primary adapter,less driver issues as well.
I'll have to try that...thx I use 1x pcie power risers. What do you mean by primary adapter with power risers? And how do I get to the bios through team-viewer? Thx Sorry, the PSU i mention in my previous post was SENTEY SDP850SS (dunno why endup written sentry hehe, automatic corrector maybe) Primary adapter I mean if you connect your monitor to the rig, the card connected to the first 16x connector, should be the primary adapter (ie connected to the monitor) if you dont conect a monitor (BETTER!) and access remotely, it doesn't matter You don't get to the bios from team-viewer, that can only be done in servers, with iLO2 (HP) or DRAC (Dell) (fantastic feature btw!, but only reserved to the best of the best  ) 650W, depends on the brand, could be a little small for 6x 750Ti, I will be more confortable with 750W 80plus. , i have that setup with a single sentey 850W PSU, better safe than sorry but if that PSU is good, and you keep TDP low, it should be enough, my rig uses 300W at the wall mining quark with 6x 750Ti so, 650W PSU, if can really take 650W, would be enough. for example a GX650 Coolermaster is a nice little beast, it will leaf is ass of with only 300W of power consumption hehe. good that you have a power meter!! ) Underwriters Laboratories My psu is bad that is the problem my 750ti rig is mining but that one rig won't when the heat wave hit. |
|
|
|
On reboot again it may work.... now to try mining.  Hi tbearhere question why do you keep the 750ti there, is insignificant compared to the other ones, and it uses a different compute architecture. wouldn't be better get rid of it, at least until you solve the issue with the second GTX970 ? which is three times more powerful? just a thought, 80% of my cards are 750Ti and GTX970, I never ever mixed them, i already have way too many problems with risers, lack of lanes, power limitations, to have to deal with different compute architectures in the same machine hehe. (EDIT) I just saw the image you posted again, you could disable onboard VGA too, and use the vga on the 16x slot as primary adapter,less driver issues as well.I'll have to try that...thx I use 1x pcie power risers. What do you mean by primary adapter with power risers? And how do I get to the bios through team-viewer? Thx |
|
|
|
I would take it out but 7mh/s quark is alot of hash.
I did take it out and had the same problem.
I'm done messing with it, 200hrs, because my ANTEC psu is bad not allowing enough power to everything.
One rail must be bad so I'm leaving it at 2 980ti 1 970 1 750ti. Again if I take out the 750ti and put the 970gtx crash drivers and if it hashs for 2 minutes the psu shuts off. 1300 watts continuous meaning it should take a load of 1300 watts forever.. max I can get is 850 watts on that ANTEC psu 1 rma already on it. And no U/L listing anyone know what that is? I do..meaning no matter what is made in China Mexico ect can be sold good, bad, and falling apart in your hand. U/L listed would stop that. Undewighters laboratories.
I was warned about ANTEC after I bought it. I did do research on it and they listed the best. right. Next time I'll ask in here.
ps the 2nd 970 clocks show 1519 wtf Should be maybe 1312
And this rig was supposed to have dual everything mb psu and 12 980ti but it can't be done. So the next cards I'll buy is 750ti.............
Huh... ANTEC...... right, i had tons of issues with antec, and don't even get me started taking about thermaltake  Sure this forum IS the place to ask for a good PSU, probably no other place in the world has more experience pushing computer PSUs to their limits as alt-coin miners in this forum hehehe I think you shouldn't load any ATX psu above 70% capacity, almost all of them will die if you do that. If you have two PSUs that are dual conversion models (converts everything to 12V and then uses VRM to regulate 5 and 3.3) you can use them with ADD2PSU adapter and power them at the same time, I had entire farm working like that (using 2x850W Sentry 80 plus psus (superflower design)) and still have all the power supplies intact, but i never load them above 50% load. Also how do you measure power?, because software lies a lot!, do you have an wall-AC power meter like the kill-a-watt? only trust measuring at the wall, not software. sorry you probably already test that but i have been following your thread about this issue and don't remember if you did it. did you try only the two GTX 970's ? (removing the 980ti's and the 750ti ?), are they stable just those two?. listen at the problematic 970, does it sing (whine) while mining?, sometimes a faulty VRM or loose coil can cause weird effects. Recently I purchased 2 extra gigabyte 970 like yours and one, when used at top TDP, whines a little , it is bare noticeable, but it whines, so i moved it to the position where it would be the coolest card in the bunch, because i know it would be the first to die if I push it, and of course, lower the TDP, not only you get more efficiency Mh/watt but it also makes it more stable and will last a LOT more. Heat is the enemy! measuring at the wall in fact 1 meter from me is my rig with a watt meter. I have my 750ti rig at 70% or so on psu in another room and getting ready to move this to another room.. getting hot here. Sentry 80 plus ok I'll look into it... And one that I can set its fan speed I think corsair not sure... Wish I could get my BTC back on the ANTEC but no a rma then they well send another piece of s... But still these cards should be locked in the p0 state. ooooo my psu is 650 watt for 6 card 750ti rig. Working great. |
|
|
|
Adding to my previous post... Had a quick look at the AsRock BTC Pro manual, and couple of things sparked my interest: - Onboard NIC uses x1 PCIe lane! - 1 Slot can do PCIe v2.0 x16 - 5 Slots are PCIe v2.0 x1 I don't know what other Onboard devices might be using up lanes as those are not clearly stated (though I posted about the usual suspects already). It would be wise to disable every single motherboard/chipset feature that is not critical to the rig operation. @crysx & others, what setting do you have on the BIOS for "PCIE2 Link Speed"? Maybe worth fiddling with the possible options there. Edit: One last note on this mental exercise: I'm with joblo in suspecting that it could just be that the problem is when you cross the 32GB boundary in memory attached to PCIe devices. If this is the case, you'll find that the same rig will max out at 4 * GTX1080's  PCIE2 Link Speed seemed to cause my other 970 to stop hahing its locked in the p4 state. Using hd graphics to see the bios to set it back to normal. It was worth a try though. I wish I could lock these cards permanently in the p0 state like their supposed to. Done their back to p2 state. |
|
|
|
Is the errorcode 43? Disable internal grphics
Yes obut on the graphics card very rare on internal graphics sp And when the cards reboot some are in the p8 state p2 state these cards are crap to me these gaming cards should be locked in the p0 state always no matter what like the 750ti... Anyone have a non gaming cards to see what state it is in COLD very important that it is room temperature to measure because it goes through the p0 then p2 p6 p8 as its cooling. That is another problem I have. Just set the time to 10 sec but hot may take 1 minute. I hate these cards. I took the extra 970 out trying to get back where I was. |
|
|
|
|
Show Posts
