On reboot again it may work.... now to try mining. ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2F54GbPXD.jpg&t=663&c=g2Tycmx8ZQCqOA) Hi tbearhere question why do you keep the 750ti there, is insignificant compared to the other ones, and it uses a different compute architecture. wouldn't be better get rid of it, at least until you solve the issue with the second GTX970 ? which is three times more powerful? just a thought, 80% of my cards are 750Ti and Gafter TX970, I never ever mixed them, i already have way too many problems with risers, lack of lanes, power limitations, to have to deal with different compute architectures in the same machine hehe. (EDIT) I just saw the image you posted again, you could disable onboard VGA too, and use the vga on the 16x slot as primary adapter,less driver issues as well.I would take it out but 7mh/s quark is alot of hash. I did take it out and had the same problem. I'm done messing with it, 200hrs, because my ANTEC psu is bad not allowing enough power to everything. One rail must be bad so I'm leaving it at 2 980ti 1 970 1 750ti. Again if I take out the 750ti and put the 970gtx crash drivers and if it hashs for 2 minutes the psu shuts off. 1300 watts continuous meaning it should take a load of 1300 watts forever.. max I can get is 850 watts on that ANTEC psu 1 rma already on it. And no U/L listing anyone know what that is? I do..meaning no matter what is made in China Mexico ect can be sold good, bad, and falling apart in your hand. U/L listed would stop that. Undewighters laboratories. I was warned about ANTEC after I bought it. I did do research on it and they listed the best. right. Next time I'll ask in here. ps the 2nd 970 clocks show 1519 wtf Should be maybe 1312 Why do you keep the intel internal graphics. Disable it i the bios. Another trick is to disable the 2 cards in the list including the card with the yellow triangle, and then enable the two cards in the opposite order. And this rig was supposed to have dual everything mb psu and 12x 980ti but it can't be done. So the next cards I'll buy is 750ti............. I just didn't think that internal graphics not in use would do anything. Thx I now wonder how much power it is drawing. >Another trick is to disable the 2 cards in the list including the card with the yellow triangle, and then enable the two cards in the opposite order.< What would that do? The card did install but sometimes on reboot it has issues.
|
|
|
On reboot again it may work.... now to try mining. ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2F54GbPXD.jpg&t=663&c=g2Tycmx8ZQCqOA) Hi tbearhere question why do you keep the 750ti there, is insignificant compared to the other ones, and it uses a different compute architecture. wouldn't be better get rid of it, at least until you solve the issue with the second GTX970 ? which is three times more powerful? just a thought, 80% of my cards are 750Ti and Gafter TX970, I never ever mixed them, i already have way too many problems with risers, lack of lanes, power limitations, to have to deal with different compute architectures in the same machine hehe. (EDIT) I just saw the image you posted again, you could disable onboard VGA too, and use the vga on the 16x slot as primary adapter,less driver issues as well.I would take it out but 7mh/s quark is alot of hash. I did take it out and had the same problem. I'm done messing with it, 200hrs, because my ANTEC psu is bad not allowing enough power to everything. One rail must be bad so I'm leaving it at 2 980ti 1 970 1 750ti. Again if I take out the 750ti and put the 970gtx crash drivers and if it hashs for 2 minutes the psu shuts off. 1300 watts continuous meaning it should take a load of 1300 watts forever.. max I can get is 850 watts on that ANTEC psu 1 rma already on it. And no U/L listing anyone know what that is? I do..meaning no matter what is made in China Mexico ect can be sold good, bad, and falling apart in your hand. U/L listed would stop that. Underighters laboratories. I was warned about ANTEC after I bought it. I did do research on it and they listed the best. right. Next time I'll ask in here. ps the 2nd 970 clocks show 1519 wtf Should be maybe 1312 And this rig was supposed to have dual everything mb psu and 12 980ti but it can't be done. So the next cards I'll buy is 750ti.............
|
|
|
Adding to my previous post... Had a quick look at the AsRock BTC Pro manual, and couple of things sparked my interest: - Onboard NIC uses x1 PCIe lane! - 1 Slot can do PCIe v2.0 x16 - 5 Slots are PCIe v2.0 x1 I don't know what other Onboard devices might be using up lanes as those are not clearly stated (though I posted about the usual suspects already). It would be wise to disable every single motherboard/chipset feature that is not critical to the rig operation. @crysx & others, what setting do you have on the BIOS for "PCIE2 Link Speed"? Maybe worth fiddling with the possible options there. Edit: One last note on this mental exercise: I'm with joblo in suspecting that it could just be that the problem is when you cross the 32GB boundary in memory attached to PCIe devices. If this is the case, you'll find that the same rig will max out at 4 * GTX1080's Thx myagui I'm going to look now. One thing, the asrock will reset to defaults on power interrupt..so I have to go and check things out. I do many power interrupts. Ok PCIE2 Link set in Bios.... doing some test runs. ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) And I added the other 970gtx. After installed drivers clean I get this every time like crysx On reboot again it may work.... now to try mining. ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2F54GbPXD.jpg&t=663&c=g2Tycmx8ZQCqOA)
|
|
|
Adding to my previous post... Had a quick look at the AsRock BTC Pro manual, and couple of things sparked my interest: - Onboard NIC uses x1 PCIe lane! - 1 Slot can do PCIe v2.0 x16 - 5 Slots are PCIe v2.0 x1 I don't know what other Onboard devices might be using up lanes as those are not clearly stated (though I posted about the usual suspects already). It would be wise to disable every single motherboard/chipset feature that is not critical to the rig operation. @crysx & others, what setting do you have on the BIOS for "PCIE2 Link Speed"? Maybe worth fiddling with the possible options there. Edit: One last note on this mental exercise: I'm with joblo in suspecting that it could just be that the problem is when you cross the 32GB boundary in memory attached to PCIe devices. If this is the case, you'll find that the same rig will max out at 4 * GTX1080's Thx myagui I'm going to look now. One thing, the asrock will reset to defaults on power interrupt..so I have to go and check things out. I do many power interrupts. Ok PCIE2 Link set in Bios.... doing some test runs. ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) And I added the other 970gtx.
|
|
|
Adding to my previous post... Had a quick look at the AsRock BTC Pro manual, and couple of things sparked my interest: - Onboard NIC uses x1 PCIe lane! - 1 Slot can do PCIe v2.0 x16 - 5 Slots are PCIe v2.0 x1 I don't know what other Onboard devices might be using up lanes as those are not clearly stated (though I posted about the usual suspects already). It would be wise to disable every single motherboard/chipset feature that is not critical to the rig operation. @crysx & others, what setting do you have on the BIOS for "PCIE2 Link Speed"? Maybe worth fiddling with the possible options there. Edit: One last note on this mental exercise: I'm with joblo in suspecting that it could just be that the problem is when you cross the 32GB boundary in memory attached to PCIe devices. If this is the case, you'll find that the same rig will max out at 4 * GTX1080's Thx myagui I'm going to look now. One thing, the asrock will reset to defaults on power interrupt..so I have to go and check things out. I do many power interrupts.
|
|
|
it IS a dual core celeron g1840 intel chip ... 5 cards will work without issue ... 6 wont ... h81btcpro motherboard ...
the ram is kingston hyperx 1600 16gb ( 2 x 8gb ) and is the most ram you can put in these systems apparently ...
there are TWO psu - corsair ax1200i ... more than enough to power the whole system ...
#crysx
FWIW: That CPU maxes out at 16x PCIe 3.0 lanes. http://ark.intel.com/products/80800/Intel-Celeron-Processor-G1840-2M-Cache-2_80-GHzDepending on the motherboard implementation (specific lane design/splitting/switching), you'll run out of PCIe lanes to feed the last GPU. Any features that you disable on the BIOS, might help, especially if it has SATA, M.2, USB3.0, or any setting to force PCIe v2.0/1.0 mode. I didn't look into the motherboard specifics at all, so I'm just generally speaking in this case. A quick enough test, would be to plug in a more capable CPU, if you happen to have one at hand... Good luck with that! (seems like nothing on the regular consumer line would do) There you go... good job myagui. In my case I ran out of lanes and my psu maybe bad. That's why I am having so many problems. But it does work with 6 low end gpu's = 750ti's.. but not with the highend but then again I have psu issues. So my extra 970gtx can't be used in that rig. I should try taking out the 750ti and put the 970gtx in its place to see if that will work. Not sure if the psu will handle it. It cuts off sometimes at 900 watts and it is rated 1300 continuous. That is my second psu replacement from ANTEC. I will never buy ANTEC again. To send it back for a second rma would cost me more BTC then buying a new different psu. Again the rig that has issues has 2 980ti 1 970gtx 1 750ti. SP is running 6x970 on one rig with a small cpu so it definitely possible But it's a 4 core sp has. But the psu is probably bad.
|
|
|
it IS a dual core celeron g1840 intel chip ... 5 cards will work without issue ... 6 wont ... h81btcpro motherboard ...
the ram is kingston hyperx 1600 16gb ( 2 x 8gb ) and is the most ram you can put in these systems apparently ...
there are TWO psu - corsair ax1200i ... more than enough to power the whole system ...
#crysx
FWIW: That CPU maxes out at 16x PCIe 3.0 lanes. http://ark.intel.com/products/80800/Intel-Celeron-Processor-G1840-2M-Cache-2_80-GHzDepending on the motherboard implementation (specific lane design/splitting/switching), you'll run out of PCIe lanes to feed the last GPU. Any features that you disable on the BIOS, might help, especially if it has SATA, M.2, USB3.0, or any setting to force PCIe v2.0/1.0 mode. I didn't look into the motherboard specifics at all, so I'm just generally speaking in this case. A quick enough test, would be to plug in a more capable CPU, if you happen to have one at hand... Good luck with that! (seems like nothing on the regular consumer line would do) There you go... good job myagui. In my case I ran out of lanes and my psu maybe bad. That's why I am having so many problems. But it does work with 6 low end gpu's = 750ti's.. but not with the highend but then again I have psu issues. So my extra 970gtx can't be used in that rig. I should try taking out the 750ti and put the 970gtx in its place to see if that will work. Not sure if the psu will handle it. It cuts off sometimes at 900 watts and it is rated 1300 continuous. That is my second psu replacement from ANTEC. I will never buy ANTEC again. To send it back for a second rma would cost me more BTC then buying a new different psu. Again the rig that has issues has 2 980ti 1 970gtx 1 750ti.
|
|
|
is it just me that's confused at why these gripes keep getting repeated??
What gripes JaredKaragen? ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) The possibility that low diff coins have a detrimental effect on income? The estimate may go down, but the actual may go up. Some coins are so low on difficulty, that they can be solo mined. Pooled mining is something different. But when block winning hashes are so high that they are wasted against a low diff coin, rather than put against the high diff coin, we have to ask if it is worth it. But this is not just pooled mining, it is pooled exchanging. Yes... I understand. ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Like in my signature below.
|
|
|
is it just me that's confused at why these gripes keep getting repeated??
What gripes JaredKaragen? ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
8 pin gpu and pcie 8 different ... and the 970gtx only needs 2 6 pin on power but has 1 6 pin and 1 8 pin. Which layout is correct? I don't know.
Don't confuse the CPU power 2x4 pin with GPU 8 pin. Plug the six pin cables into the 8 pin GPU connectors, just make sure they keys are ligned up. And make sure you connect the CPU 4 or 8 pins to your mobo. I know that ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) I have 2 980ti and 1 970 gtx running. The thing is why the difference on the 2x 8 pin non cpu? One says some type of voltage control.
|
|
|
8 pin gpu and pcie 8 different ... and the 970gtx only needs 2 6 pin on power but has 1 6 pin and 1 8 pin. Which layout is correct? I don't know.
|
|
|
6 cards the same 750ti same rig. ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) 3 cards mc 3 bat MC quark bat file controled by pool lyra2v2 quark .0060 lyra2v2 .0030 earnings. Test run. qubit both .0150 earning. just now. 2:40 pm neoscrypt pending MC bat still qubit 2:43 neoscrypt both 2:45 end of test. ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Close to pool signal.
|
|
|
HASHPOWER I took my rigs off your pool until I get paid. Thx
|
|
|
WHERE IS MY PAYMENT ...........
I havwn't received a payment since before the system went down Monday. The coins are all exchanged, just need to pay them. You mean the exchange ? I mean the coins I was mining before the crash have all been exchanged for BTC and show up in my balance. HP just needs to fix their autopayout now. Ok I see thx EDIT: I think I know who owns hp... not sure but if I'm right he won't respond for a week or 2. And he has 35 rigs going so he won't care.
|
|
|
![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FcJtiDjf.png&t=663&c=ADWglYDxfjUDVg) ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FRrkMClT.jpg&t=663&c=qBoQU_BJSmaFGg) I ran across this. what is wrong with this picture? Seems wrong. Look at the 8 pin. My 970 is still on the shelf .. it maybe the psu.
|
|
|
WHERE IS MY PAYMENT ...........
I havwn't received a payment since before the system went down Monday. The coins are all exchanged, just need to pay them. You mean the exchange ?
|
|
|
WHERE IS MY PAYMENT ...........
|
|
|
a 750ti will do 250 kh/s scrypt = 1 a 750ti will do 6800 kh/s quark = 27.2 nvidia ccminer
Anyone have the nvidia auto switch chart for zpool settings plz. thx
'scrypt' => 1, 'scryptn' => 0.5, 'c11' => 2.0, 'x11' => 5.5, 'x13' => 3.9, 'x14' => 3.7, 'x15' => 3.5, 'nist5' => 6.0, 'zr5' => 10.0, 'drop' => 5.0; 'neoscrypt' => 0.3, 'lyra2' => 1.3, 'quark' => 6,
Got it very wrong. Very very wrong. unless this is an algorithm.
|
|
|
DARKNET quark algo why don't you add it Crackfoo looks like I wont get a payout from hp.
Tbear, are you ok ? dnet was always here, but hp's profitability on it is fake http://www.zpool.ca/site/block?id=1465Tell you the truth I'm not ok .. really so many things happening to me right now. ![Undecided](https://bitcointalk.org/Smileys/default/undecided.gif) Why is that fake? I can't see the problem? Plz help thx no problem, this is how yaamp pools earn money, i won't tell more here, you are long enough into it to understand The thing is they were paying me the amount due all along. Unless he gave up just now and is sending out false signals. I'm going to check net difficulty now then I'll know. EDIT: Yup hp paying .0077 per 6 750ti and bittrex is paying .005 per 6 750ti. Your correct .. I'm taking out hp from my confg files right now...damn him hp. Thx ax66.... appreciate that. I am getting payouts from hp lets see if he pays the true amount owed.
|
|
|
|