 Show Posts
|
|
Pages: « 1 [2] 3 4 5 6 »
|
Hello. I downloaded and tested this miner. I dont think that it is needed to add script for it. For me it is working stable. can you make script for sgminer ? many thanks
Hello. Please give me a link to it. Hello. Phoenix done. About dual mining need to think... Honestly i dont want to add this, in generally script ignore dual coin.  Great job, Acrefawn! However I'm having problems using the script with MiningRigRentals: when my rig is rented, MRR interrupts stratum connection and your script detects it and restars ccminer (switches servers): [17.03.2018][20:49:29] [2018-03-17 20:47:15] Stratum connection interrupted [17.03.2018][20:49:44] Pool server was switched to 0. Please check your Config_Cmnr.ini file carefully for spelling errors or incorrect parameters. Otherwise check if the pool you are connecting to is online. However miner was already working again and there was no need to restart it: ... [2018-03-17 20:47:13] [S/A/T]: 5/5430/5430, diff: 0.065, 44.21MH/s (yes!) [2018-03-17 20:47:15] Stratum connection interrupted <-- my rig was rented by someone [2018-03-17 20:47:30] [S/A/T]: 5/5431/5431, diff: 0.107, 44.20MH/s (yes!) [2018-03-17 20:47:35] [S/A/T]: 5/5432/5432, diff: 0.067, 44.20MH/s (yes!) [2018-03-17 20:47:39] xevan block 46796, diff 65.174 [2018-03-17 20:47:43] [S/A/T]: 5/5433/5433, diff: 0.067, 44.20MH/s (yes!) [2018-03-17 20:47:50] [S/A/T]: 5/5434/5434, diff: 0.200, 44.20MH/s (yes!) [2018-03-17 20:47:56] GPU#0:Found 2nd nonce: 05921de7 [2018-03-17 20:47:56] [S/A/T]: 5/5435/5435, diff: 0.423, 44.21MH/s (yes!) [2018-03-17 20:47:56] [S/A/T]: 5/5436/5436, diff: 0.423, 44.21MH/s (yes!) [2018-03-17 20:48:00] [S/A/T]: 5/5437/5437, diff: 0.168, 44.21MH/s (yes!) [2018-03-17 20:48:01] [S/A/T]: 5/5438/5438, diff: 0.514, 44.21MH/s (yes!) [2018-03-17 20:48:11] [S/A/T]: 5/5439/5439, diff: 0.095, 44.21MH/s (yes!) [2018-03-17 20:48:17] [S/A/T]: 5/5440/5440, diff: 0.096, 44.21MH/s (yes!) [2018-03-17 20:48:23] [S/A/T]: 5/5441/5441, diff: 0.207, 44.20MH/s (yes!) [2018-03-17 20:48:55] xevan block 46797, diff 70.295 [2018-03-17 20:49:00] [S/A/T]: 5/5442/5442, diff: 0.074, 44.21MH/s (yes!) [2018-03-17 20:49:06] [S/A/T]: 5/5443/5443, diff: 0.639, 44.21MH/s (yes!) [2018-03-17 20:49:09] [S/A/T]: 5/5444/5444, diff: 0.092, 44.21MH/s (yes!) [2018-03-17 20:49:09] [S/A/T]: 5/5445/5445, diff: 0.195, 44.21MH/s (yes!) [2018-03-17 20:49:12] [S/A/T]: 5/5446/5446, diff: 0.085, 44.21MH/s (yes!) [2018-03-17 20:49:12] [S/A/T]: 5/5447/5447, diff: 0.108, 44.21MH/s (yes!) [2018-03-17 20:49:14] [S/A/T]: 5/5448/5448, diff: 0.155, 44.21MH/s (yes!) [2018-03-17 20:49:22] [S/A/T]: 5/5449/5449, diff: 0.175, 44.21MH/s (yes!) [2018-03-17 20:49:31] [S/A/T]: 5/5450/5450, diff: 0.068, 44.21MH/s (yes!) [2018-03-17 20:49:34] Stratum difficulty set to 32 (0.12500) [2018-03-17 20:49:34] xevan block 46798, diff 72.021 here log file interrupts because miner was restarted. Please suggest what should I replace in the .bat file to avoid this in the future. Thanks very much. PS: donated sime mining time to you on March 17  Hello. Thank you very much! You need to disable switching servers in config. internetcheck=2 or fully disable this check internetcheck=0 |
|
|
|
|
Today version 1.9.6 released!
☄️ 1.9.6 - Список изменений.
- Обновлен внешний вид скрипта.
- Добавлена проверка на размер файла autorun.log и его удаление в случае если размер больше 1 мегабайта.
- Ошибка "gpu hangs" в Claymore больше не будет перезагружать компьютер, только майнер.
- Добавлена ошибка для Dstm "msg buffer full".
- Добавлена ошибка для Bminer "Fatal cuda error".
- Добавлена ошибка для Ccminer "unspecified launch failure".
- Возможность отключить определение 0C температуры как ошибку через конфиг.
- Исправлен баг когда скрипт не перезагружал майнер/компьютер в случае потери интернета.
- Добавлены ошибки телеметрии.
- Увеличен таймер ожидания после создания log файла на 5 секунд.
- Последующие обновления через команду /update обновят все скрипты в папке к текущей версии.
- Добавлен еще один бот для онлайн/офлайн сервера.
- Другие косметические исправления.
☄️ 1.9.6 - Changelog
- Updated the appearance of the script.
- Added check for the size of the autorun.log file and its deletion in case the size is more than 1 megabyte.
- The "gpu hangs" error in Claymore will no longer reset the computer, only the miner.
- An error has been added for Dstm "msg buffer full".
- Added error for Bminer "Fatal cuda error".
- Added error for Ccminer "unspecified launch failure".
- Ability to disable the definition of 0C temperature as an error through the config.
- Fixed a bug where the script did not reboot the miner / computer in the event of a loss of the Internet.
- Telemetry errors have been added.
- Increased the wait timer after creating the log file for 5 seconds.
- Subsequent updates through the / update command will update all the scripts in the folder to the current version.
- Added one more bot for online / offline server.
- Other cosmetic fixes.
Ewbf Equihash - Ewbfautorun.bat
Dstm Equihash - Dstmautorun.bat
Claymore Equihash - ClayZECautorun.bat
Claymore CryptoNote - ClayXMRautorun.bat
Claymore NeoScrypt - ClayNSautorun.bat
Claymore Dagger-Hashimoto - ClayETHautorun.bat
Ethminer Dagger-Hashimoto - Ethrautorun.bat
Ccminer tpruvot, alexis (palgin), KlausT - CCautorun.bat
Premium price changed from 0.05ZEC to 20$ eq in any cryptocurrency from donations list.
|
|
|
|
The addition of \update which automatically updates the script to the latest version is an extremely useful feature, especially when running multiple computers like me... This is a wonderful batch.
Thank you! Is there a way to view the ccminer window or the log or whatever while it's operating?
Unfortunately it is impossible using standard CMD.EXE to both display information on screen and write it in the .log file at the same time. The script will ONLY work if the information is written in the .log file, making "on screen" impossible. Also, ccminer is giving me card hash rates in mh and kh, which is ruining the hash rate reboot monitor. Any chance to remediate that somehow?
Sorry it is very hard to detect kh and mh what is exactly. Script take numbers and compare them. You just need to know what exactly NUMBER your miners give and use it in hashrate reboot monitor. Problem is because i create 1 script for all Ccminers. I need to think and get solution for all Ccminers... very hard  Does this work for Claymore CPU cryptonight?
Hello. Pls give me link to this miner. Hi,
scripts are fantastic, but I have a small problem with ccminer bot.
When miner crash, WatchBot still detect hashrate and does not restart miner.
Here is log:
2018-03-13 12:28:08] GPU #2: unspecified launch failure
[2018-03-13 12:28:08] GPU #4: unspecified launch failure
[2018-03-13 12:28:08] GPU #3: unspecified launch failure
[2018-03-13 12:28:09] GPU #3: MSI GTX 1080 Ti, 5563.03 MH/s
[2018-03-13 12:28:09] GPU #3: unspecified launch failure
[2018-03-13 12:28:09] GPU #0: MSI GTX 1080 Ti, 2737.09 MH/s
[2018-03-13 12:28:09] GPU #0: unspecified launch failure
[2018-03-13 12:28:09] GPU #1: MSI GTX 1080 Ti, 2321.70 MH/s
[2018-03-13 12:28:09] GPU #1: unspecified launch failure
[2018-03-13 12:28:09] GPU #4: MSI GTX 1080 Ti, 4041.11 MH/s
[2018-03-13 12:28:09] GPU #4: unspecified launch failure
[2018-03-13 12:28:09] GPU #2: MSI GTX 1080 Ti, 2393.04 MH/s
[2018-03-13 12:28:09] GPU #2: unspecified launch failure
[2018-03-13 12:28:09] GPU #0: unspecified launch failure
[2018-03-13 12:28:09] GPU #1: unspecified launch failure
[2018-03-13 12:28:09] GPU #4: unspecified launch failure
Can you look at this situation?
Thank you.
Hello! Thank you for reply, in next update this error will be added. Hi Acrefawn, Thanks for the great update.
Quick question is there a fee for using the non-telegram version.
I cant seem to remember......
tia.
Hello. 100% free. |
|
|
|
Today version 1.9.5 released!  Список изменений - 1.9.5- Добавлена проверка на размер файла логов.
- Добавлен еще один бот для помощи в обработке запросов.
- Изменено количество логов и скриншотов, которые сохраняются в папках с 50 до 30.
- Параметр hashrate= в config.ini дополнен информацией.
- Исправлена проблема корректного чтения скорости Ethminer.
- Добавлена еще одна ошибка в обработчик для Ccminer.
- GPU_FORCE_64BIT_PTR теперь равно 1 для Claymores Zec и Xmr.
- Косметические исправления.
Changelog - 1.9.5- Added check for the size of the log file.
- Added another bot to help with query processing.
- Changed the number of logs and screenshots that are stored in folders from 50 to 30.
- The hashrate = parameter in config.ini is supplemented with information.
- Fixed the problem of correct reading of the Ethminer speed.
- Another error was added to the handler for Ccminer.
- GPU_FORCE_64BIT_PTR is now 1 for Claymores Zec and Xmr.
- Cosmetic fixes.
Ewbf Equihash - Ewbfautorun.bat
Dstm Equihash - Dstmautorun.bat
Claymore Equihash - ClayZECautorun.bat
Claymore CryptoNote - ClayXMRautorun.bat
Claymore NeoScrypt - ClayNSautorun.bat
Claymore Dagger-Hashimoto - ClayETHautorun.bat
Ethminer Dagger-Hashimoto - Ethrautorun.bat
Ccminer tpruvot, alexis (palgin), KlausT - CCautorun.batPremium price 0.05ZEC or eq in other cryptocurrency.
|
|
|
|
Telegram will not let me contact you, Every time i try it says I can only message mutual contacts. Anyway, what I did was set the miner to operate up to 80c but have NV-Instector limit to 70c, so that issue is just fine. As far as the ZEC payments. I am interested in the telegram bot. I may not be able to contact you, but I can receive so telegram notifications will be nice.
Write to me in private your Telegram nickname starting from @ and I will add you. It is not a problem. Any chance of a Linux version?   Sorry, only Windows. I will not support Linux, you can try other good products like "hiveos" etc... Can i get more reviews from people who tried it ?
I'm using it. And not only does it do "as advertised" it has increased my average hash rate from 6.3 to 6.7 Kh/s. I'm running Claymore 12.6 with three 7990's, three R9-295X2's, three Radeon Pro Duo 12gb, and six RX-580's. My rigs were all relatively stable before I found this, but I was still having occasional issues with Claymore hanging. This resolved that. I also like the auto reboot every two days. I give this five out of five stars! Thank you very much for your trust and support! |
|
|
|
GPU temp is the biggest issue for me right now. Anyone know how to contact the dev besides telegram? I just signed up but it wont let me message anyone. I sent the 0.05 ZEC to get the other features and stuff. But I cant use it with the temp limit. I want DTSM to do its job with the temp limit.
Every change I make to the bat file just causes it to crash. Tried to comment out the warningslist, tried to stop it from parsing for temp data. nothing
Hello. I'm always answer here, on other forums, in Telegram and on my Facebook page. Also i have email. Remove --temp-limit 80 from config.ini. Or set it to 90C. What`s a problem? About donations, when you sent 0.05 ZEC? Why you dont contact me in Telegram? I confused, why you donating for premium features if premium features - Telegram bot... Ok, checked it. It seems like script was restarting the rig due to insufficient hashrate. I've set average hashrate in config file as 2900, but in reality its more like ~2850, so miner was restarting due to hashrate errors. So I've set it to 2800 and that seem to solve the problem, thanks! But can you please add commentary in the config file explaining why we need to set average hashrate and how it affects script functionality, in the future versions? Because I had no idea why that parameter exists and how it affects mining.
Hello. Okay I will add more information. Thx. As you can see, if hashrate is lower - miner will be restarted. Sometimes it helps when hashrate drops because of miner long run. Hi,
I tried clayethautorun.bat script today at my 12GPU rig and there is small problem. Sricp run Clay miner, but than kill it right before Clay load all 12 gpu with.
Is there some time out before autorun check for running Claymore?
Thank you.
Hello. Check ClayETHautorun.log. |
|
|
|
Hello! I'm getting quite strange behavior of the latest (1.9.4) version of the script working with DSTM 0.6. Runtime error check fills up for 5/5 very quickly, in 5 minutes or less, causing rig to restart, and there is nothing wrong with miner itself - it mines as usual without problems. Can you please investigate?
Hello. Check Dstmautorun.log. |
|
|
|
Today version 1.9.4 released!  Список изменений 1.9.2 - 1.9.3 - 1.9.4- Добавлена поддержка отображения большего количества видеокарт в Claymore.
- Увеличен таймер ожидания создания файла логов на 5 секунд.
- Уменьшено время ожидания перед перезагрузкой компьютера в случае потери соединения на 5 минут.
- Добавлена возможность переписывать то количество серверов, которое было задано изначально, а не всегда 5.
- Добавлен режим internetcheck=2 - отключает переключение серверов но оставляет за собой проверку интернета.
- Изменения на стороне сервера бота. Запуск новой версии сервера команд.
- Теперь Бимайнер корректно видит и распознает ошибки.
- Улучшено распознавание имен Ригов.
- Ускорена обработка Телеграм команд.
- Скрипт теперь принимает команды поочередно (одну за другой), а не только последнюю.
- Добавлена ошибка в обработчик для Dstm и Ewbf майнеров.
- Исправлена команда pool для Bminer.
- Добавлена возможность отключить полностью все уведомления в Телеграм.
- Сервер и майнер не будет переключатся если он уже работает на этой опции.
- Добавлена проверка целостности файла после обновления, а также проверка на использование последней версии скрипта.
- Поддержка Claymore Neoscrypt и Ethminer.
- Поддержка отображения информации для Ccminer lux.
- Оптимизация отображения информации для Ccminer.
- Дополнены и исправлены обработчики ошибок Ccminer, Bminer.
- Добавлены боты для более быстрой обработки онлайн сервера.
- Добавлена проверка на отправку пустых сообщений.
- Немного удалось ускорить чтение логов для Claymore.
- Улучшения апдейтера.
- Мелкие и косметические исправления.
Changelog - 1.9.2 - 1.9.3 - 1.9.4- Added support for displaying more video cards in the claymore.
- Increased the wait logging timer for 5 seconds.
- Reduced the wait time before rebooting the computer in the event of a connection loss for 5 minutes.
- Added the ability to overwrite the number of servers that were initially assigned, and not always 5.
- Added the mode internetcheck = 2 - disables the switching of servers but reserves the Internet check.
- Changes on the server side of the bot. Run a new version of the command server.
- Now Bminer correctly sees and recognizes errors.
- Improved recognition of Rig names.
- The processing of Telegram commands is accelerated.
- The script now takes commands one at a time (one after another), not just the last one.
- An error has been added to the handler for the Dstm and Ewbf miners.
- Fixed the pool command for Bminer.
- Added the ability to completely turn off all notifications in Telegram.
- The server and the miner will not switch if it already works on this option.
- Added file integrity check after update, as well as checking for the latest version of the script.
- Added support for Claymore Neoscrypt and Ethminer.
- Support for displaying information for Ccminer lux is provided.
- Optimization of information display for Ccminer.
- The error handlers Ccminer, Bminer are added and corrected.
- Added bots for faster processing of the online server.
- Added check for sending empty messages.
- A little has been done to speed up reading the logs for Claymore.
- Improvements of the updater.
- Minor and cosmetic corrections.
Ewbf Equihash - Ewbfautorun.bat Dstm Equihash - Dstmautorun.bat Claymore Equihash - ClayZECautorun.bat Claymore CryptoNote - ClayXMRautorun.bat Claymore NeoScrypt - ClayNSautorun.bat Claymore Dagger-Hashimoto - ClayETHautorun.bat Ethminer Dagger-Hashimoto - Ethrautorun.bat Ccminer tpruvot, alexis (palgin), KlausT - CCautorun.bat Premium price 0.05ZEC or eq in other cryptocurrency.
|
|
|
|
- The ability to update the script via the Telegram command is added.
Everything works great! One minor comment - in the Telegram bot, when you click "/" there is no "update" in the auto-complete options. Also, "update" is not in the "/help" result. I tried the "/update" and it worked just fine, it's just not in the list (using the premium 1.9.2). Thanks! Fixed. Today version 1.9.1 released!
Ewbf Equihash
Dstm Equihash
Claymore Equihash
Claymore CryptoNote
Claymore Dagger-Hashimoto
Ccminer tpruvot, alexis (palgin), KlausT
Awesome little script Acrefawn! You should make one for hsrminer! Thank you. Will think about it. On this weekends update i will share some other miners. Hello! Im got error use dstm 0.6 win10 zm.log is missing. Probably zm.exe hangs... Hello i hope you fixed this error, if not - contact me in Telegram t.me/acrefawn How can we remove thE GPU | Power usage and Efficiency, its wasting of time.. ! I don't know why its keeping showing. Dont understand what you are talking about. Sorry. Can we get an option to disable the scheduled miner restart messages? I have multiple rigs with audio alerts on the telegram bot chat in case of problems so it is annoying to be spammed with "scheduled miner restart" and "miner started" messages only to find out there is nothing that requires my attention when I check the app.
Done. Will be added in 1.9.4 version. Hi, do you planning to add phoenix miner support?
Yes. Hi,
I have a bug with the Claymore zcash 12.6 version of autorun:
When Claymore generates the error "GPU 0 mining has stopped because -tstop temerature reached" autorun closes. Claymore continues running but autorun does not.
Thank you for report I will test it now and fix. Hi, Nice work on bat Im testing the functionality, but i have two doubts. If i want to add an backup pool i add this on Config_xClay: # =================================================== [Miner] # Set the main server mining command here to auto-create Clay_miner.bat file if it is missing or wrong. [keep default order] commandserver1=NsGpuCNMiner.exe -xpool stratum+tcp:// eu.xxxxmine.graft.network:4444 -xwal xxxx -xpsw x -allpools 1 -tstop 80 -logfile miner.log -wd 0 # When the main server fails, ClayXMRautorun.bat will switch to the additional server below immediately. [in order] commandserver2=NsGpuCNMiner.exe -xpool stratum+tcp://pool.graftpool.online:4444 -xwal xxxx -xpsw x -allpools 1 -tstop 80 -logfile miner.log -wd 0 # Configure miner command here. Old Clay_miner.bat will be removed and a new one will be created with this value. [keep default order] internetcheck=1 required. # The default number of servers is 5, however, you can add or remove as many as you need. e.g. you can have servers 1 2 3 or you can have 1 2 3 4 5 6 7 8 9. There is no upper limit - e.g. you can have 1000 if you want. The minimum is 1. # =================================================== [Overclock program] But when for example i put purposely an error in my first server1, the program doesn t shift to commandserver2! Its ok my syntax? or have to change the ClayXMRautorun instead of Config_xClay.. Another thing is If i tried to change : # Set how many GPU devices are enabled. gpus=1and have 8 gpus, doens t gives me any error too.. and why it comes with default valor of 0, and worked good with 0 value? Even if i have more gpus installed.. Regards Thank you! 1) For test server failover put an mistake in server name or server port in commandserver1, then wait for 2 minutes, then server will be switched. Program can recognize if it is server problem or internet. So just cable disconnecting will not help to test. And program wait for 2 minutes because of miner self reconnect period. 2) Because if you use gpus=0 it will count them automatically, and if you use gpus=NUMBER program knows EXACT value. About "doesnt gives me any error" you probably disabled allowrestart function. Hi Acrefawn,
Thanks for your excellent work here.
I am finding that I am experiencing a couple of issues with this using DSTM's miner 0.5.6 with Autorun ver 1.8.1.
Issue 1:
When the server changes difficulty on several GPU's at once, there is sometimes a significant, temporary hashrate drop which autorun incorrectly identifies as a real problem and restarts the miner.
Issue 2:
I regularly receive the "Loaded too many GPUs" report on only one of my rigs.
This is a 7 card rig but for some reason Autorun is detecting 14/7 cards despite the problem not actually existing in the miner.
I suspect that this is related to an erroneous log output from the miner as follows; note that the miner has reported two iterations of each card before outputting the "average" line (the last line of the extract below)
2017-12-07 9:39:51 AM| ========== Sol/s: 2898.4 Sol/W: 3.89 Avg: 2874.0 I/s: 1565.8 Sh: 39.13 1.00 357
2017-12-07 9:39:51 AM|# GPU4 server set difficulty to: 000f0f0f0f0f0f0f0f0f0f0f...
2017-12-07 9:39:53 AM|# GPU5 server set difficulty to: 000f0f0f0f0f0f0f0f0f0f0f...
2017-12-07 9:39:55 AM|# GPU6 server set difficulty to: 000f0f0f0f0f0f0f0f0f0f0f...
2017-12-07 9:39:58 AM| GPU0 63C Sol/s: 291.4 Sol/W: 3.94 Avg: 432.1 I/s: 158.8 Sh: 4.97 1.00 349
2017-12-07 9:39:59 AM| GPU1 67C Sol/s: 279.9 Sol/W: 3.80 Avg: 419.6 I/s: 149.5 Sh: 5.31 1.00 352 ++
2017-12-07 9:40:01 AM| GPU2 54C Sol/s: 295.4 Sol/W: 3.99 Avg: 424.5 I/s: 154.2 Sh: 3.82 1.00 344
2017-12-07 9:40:03 AM| GPU3 66C Sol/s: 284.6 Sol/W: 3.74 Avg: 421.5 I/s: 152.0 Sh: 6.15 1.00 375 +
2017-12-07 9:40:05 AM| GPU4 70C Sol/s: 298.7 Sol/W: 3.83 Avg: 435.5 I/s: 159.8 Sh: 6.31 1.00 416
2017-12-07 9:40:05 AM|> GPU0 62C Sol/s: 229.0 Sol/W: 2.06 Avg: 229.0 I/s: 121.5 Sh: 5.99 1.00 343 ++
2017-12-07 9:40:06 AM|> GPU1 67C Sol/s: 225.1 Sol/W: 2.02 Avg: 225.1 I/s: 120.1 Sh: 2.96 1.00 344 +
2017-12-07 9:40:08 AM|> GPU2 54C Sol/s: 219.8 Sol/W: 2.06 Avg: 219.8 I/s: 119.7 Sh: 5.99 1.00 352 ++
2017-12-07 9:40:09 AM| GPU5 71C Sol/s: 276.1 Sol/W: 3.73 Avg: 437.3 I/s: 148.8 Sh: 7.44 1.00 344 +
2017-12-07 9:40:10 AM|> GPU3 66C Sol/s: 222.7 Sol/W: 1.95 Avg: 222.7 I/s: 119.4 Sh: 5.81 1.00 351 ++
2017-12-07 9:40:11 AM| GPU6 49C Sol/s: 162.0 Sol/W: 3.69 Avg: 248.7 I/s: 84.8 Sh: 3.79 0.96 360 +
2017-12-07 9:40:11 AM| ========== Sol/s: 1888.2 Sol/W: 3.82 Avg: 2819.2 I/s: 1008.0 Sh: 37.79 1.00 362
As a side note;
Inputting the real "average" hashrate into the config.bat file tends to cause autorun to detect too many instances of low hashrate because any reported hashrate below the average appears to be considered an error.
I'd suggest this parameter would be better if named "minimum acceptable hashrate" or similar
or
Add a configurable tolerance to the acceptable range of hashrates. ie, within (say) 10% of the average is -not- considered to be a hashrate error.
Further, (just an idea) rather than the user nominating the average hashrate, perhaps autorun could automatically detect the actual average hashrate from all log files and store it in the config.bat file.
Happy to discuss this with you if the issue isn't clear from my description. Sorry that my input is not in the form of code change suggestions, it's beyond my capability.
That said, using this script has been educational and I'm thankful that you have released it open source.
Thanks again.
Hi Firstly, I would like to thank you for this wonderful script. You are awesome. I've been testing it for the past few hours and I came across the same problem as posted above. I am using MiningPoolHub and auto-switching coins within the Equihash algorithm using DSTM on Windows 10 and Nvidia 1070s. When the difficulty changes or when DSTM is switching from one coin to another, my hashrate temporarily drops by 2000 sol/s for about 15 seconds but the script recognizes it as an error and begins to restart the miner. If I change the "average hashrate" to something very low, it won't make any sense because then there would be no point in monitoring it. Is there anyway I can add a delay or a temporary buffer for those 15 seconds while the difficulty is changing or when it's changing the coin being mined? I appreciate all of your help and thank you for making this script. Once this gets resolved, I will donate and go for the premium Thank you for detailed report, I will think about it. But in generally it is hard to realyse because we cant predict hashrate drop timeout or value. So your suggestion may not work... Hi, I use the PhoenixMiner.exe ver 2.7b, Link - https://bitcointalk.org/index.php?topic=2647654.0 which of the scripts versions will fit, if any? if not, I would LOVE if you'll support those in the very near future Thanks again for the great work! +1  same here .. if you can limit log file size, i dont have big disk ... Do not worry program self clean Logs and Screenshots folders. |
|
|
|
Today version 1.9.1 released! Список изменений - 1.9.1 - Добавлена поддержка последней версии Claymore, Dstm, Bminer.
- Исправлено отображение температуры Bminer.
- Большиснтво параметров перенесено в файл конфигурации.
- Разрешено использовать скрипты для разных майнеров одновременно на 1 компьютере.
- Исправлено и дополнено текстовую составляющую скрипта. Теперь большинство функций описаны более грамотно и детально. Надеюсь будет решен спор на тему нулевого сервера.
- Увеличено время ожидания до перезагрузки или выключения компьютера на 30 секунд.
- Увеличена разница между отправленными и принятыми шарами до 15 минут.
- Исправлена ситуация когда номер в имени компьютера ошибочно воспринимался как часть команды.
- Добавлена возможность обновлять скрипт через Телеграм команду.
- Исправлено неправильное отображение сервера для Bminer.
- Телеграм команды теперь доступны для использования до полной загрузки скрипта.
Changelog - 1.9.1 - Added support for the latest version of Claymore, Dstm, Bminer.
- Fixed Bminer temperature display.
- The majority of the parameters are transferred to the configuration file.
- It is allowed to use scripts for different miners simultaneously on 1 computer.
- The text component of the script has been fixed and added. Now most of the functions are described more competently and in detail. I hope the dispute on the topic of the zero server will be resolved.
- Increased the waiting time before restarting or turning off the computer for 30 seconds.
- The difference between sent and received shares is increased to 15 minutes.
- Fixed a situation where the number in the computer name was mistakenly perceived as part of the command.
- The ability to update the script via the Telegram command is added.
- Fixed incorrect server mapping for Bminer.
- Telegram commands are now available for use until the script is fully loaded.
Ewbf Equihash
Dstm Equihash
Claymore Equihash
Claymore CryptoNote
Claymore Dagger-Hashimoto
Ccminer tpruvot, alexis (palgin), KlausTPremium price 0.05ZEC
|
|
|
|
oops, I read an older version
Hope you fixed your problem. Or you can ask me in Telegram and i will help you. @acrefawn First let me say BEST SCRIPT OUT THERE. Easy to set up easy to use one thing i would like is to hide the cmd windows. when im at work the kids use my computer to play and internet and they always end up closing the cmd window ideal the program run in the backround on lower intensity and no way for the kids to end it thanks in advance if there is a way to do ....well just thanks Highly recomented
Thank you very much! Sorry, but i'm not planing to add "hide" functionality. It is always open to see it clear. I was planning on working on similar script (much more scaled down version though). But I am going to try this one and see how it goes. Might be able to pitch in later for further dev/testing
Good to know! If you have good ideas you can always ask me to add them in Telegram @acrefawn Thank you @Acrefawn
I think there is some issue with Bminer v5.3.0 .. I open the script .. 3sec blue CMD window close
same here ..... may be a log will welcome to know what's wrong start script one time , autoclose , no new file .... restart script "Config_Bmnr.ini" file was made and end restart again , some cmd windows start & turn off without see something in and got red windows Something is wrong... again and again Hello guys! Thank you for reply! Bminer ATM is for beta testing, it is okay to have some difficulties with it, will fix them soon! Sorry and Thx again. Hello
I think It Will Be nice if you putt to the script window:
- info about Power Consumption of each GPU
- Info about Drivers
- putt some Colors it will be look better.
- Shares
Thank you very much! I will think about it. Thanks for a great script @Acrefawn
I found everything to work well except the computer restart timer.
I have set minertimeoutrestart=24 and computertimeoutrestart=48 but only the miner restart timer works. The computer seems to be running forever.
Does it use the same timer for both miner and computer restart?
Tried restarting computer and autorun.bat manually, but it doesn't help.
Thank you! Yes, it using 1 timer. This "X" value of time means "how much miner works" - and if miner works for 24 hours - restart, but it never be 48. Recieved another reply. Yes, there is a message in the Telegram and an entry is made in the autorun.log file.
Because under normal operating conditions this part of the code is not involved. And I’m too lazy to write documentation, maybe tomorrow I’ll update it …
To reduce the size of the log file. That the script did not read the superfluous information.
If I wanted to grab your money with this script, then I would 100% do it so that no one saw it directly in the code. And the more so I would not leave a comment near this code. Therefore, as a whole, I see no reason to talk about this line. I have a lot of users who are satisfied with the result and reputation is more important to me. I cannot see in the logs or telegram anything about my mining being redirected to a third partys wallet address. Could you please enlighten me? Seems your not too lazy to write and update that part of the code to your new pools/addresses. I hope you will update the documemtation ASAP! Also add an option to the config file to give the user the choice of who they mine for while ‘debugging’. How many kb have you saved from the log file size? Why is it not recommended for us to do run with -wd 0 if the script suffers in some way from the extra information? How much have you made from the undocumented ‘debugging’ feature? |
|
|
|
Hi,
Firstly this seems to be one of the most beneficial scripts out there. Unfortunately it's not stable for me and for some reason tries to connect to the us east server every once in a while, even though I am connecting to the asia ethash server of mining pool hub. This error doesn't occurs if I run claymore standalone and the pc runs for days with no issue, but when I use this script it keeps giving me unable to connect to us-east1.ethereum.miningpoolhub.com:20535 error, please know, that this server is not mentioned anywhere in the config file. The mining script that I use, with the backup scripts is as follows
SET Server1BatCommand=EthDcrMiner64.exe -epool asia.ethash-hub.miningpoolhub.com:20535 -ewal xxxx.eth+sia -eworker xxxx.EthSiaMonitor -esm 2 -epsw x -estale 0 -dpool stratum+tcp://decred.eu.nicehash.com:3354 -dwal xxxx.570eth -dpsw x -dcri 16 -di 1 -mport 0 -tstop 80 -logfile miner.log
REM When the main server fails, autorun will switch to the additional server below immediately. [in order]
REM Configure miner command here. Old miner.bat will be removed and a new one will be created with this value. [keep default order] EnableInternetConnectivityCheck=1 required.
SET Server2BatCommand=EthDcrMiner64.exe -epool asia.ethash-hub.miningpoolhub.com:20535 -ewal xxxx.eth+sia -eworker xxxx.EthSiaMonitor -esm 2 -epsw x -dpool stratum+tcp://hub.miningpoolhub.com:20550 -dwal xxxx.eth+sia -dpsw x -dcoin sc -dcri 16 -di 1 -mport 0 -tstop 80 -logfile miner.log
SET Server3BatCommand=EthDcrMiner64.exe -epool asia.ethash-hub.miningpoolhub.com:20535 -ewal xxxx.eth+sia -eworker xxxx.EthSiaMonitor -esm 2 -epsw x -estale 0 -dpool stratum+tcp://decred.eu.nicehash.com:3354 -dwal xxxx.570eth -dpsw x -dcri 16 -di 1 -mport 0 -tstop 80 -logfile miner.log
SET Server4BatCommand=EthDcrMiner64.exe -epool asia.ethash-hub.miningpoolhub.com:20535 -ewal xxxx.eth+sia -eworker xxxx.EthSiaMonitor -esm 2 -epsw x -dpool stratum+tcp://hub.miningpoolhub.com:20550 -dwal xxxx.eth+sia -dpsw x -dcoin sc -dcri 16 -di 1 -mport 0 -tstop 80 -logfile miner.log
SET Server5BatCommand=EthDcrMiner64.exe -epool stratum+tcp://daggerhashimoto.eu.nicehash.com:3353 -ewal xxxx.rx570eth -epsw x -esm 3 -allpools 1 -estale 0 -dpool stratum+tcp://decred.eu.nicehash.com:3354 -dwal xxxx.rx570eth -dcri 16 -di 1 -mport 0 -tstop 80 -logfile miner.log
Here is a pic of the error.
Any help is appreciated.
Hello. Try latest version and report to me. Generally it is pool problem. |
|
|
|
Hello guys! Want to remind to all of you, that if somebody has any problems with stability of EWBF, DSTM, BMINER, CLAYMORE, CC miners or needs some extra control over your rigs please read carefully my message below. I want to introduce you a script, which can solve most of your problems. It is a result of half a year hard work with my beta testers. Now it is clean of any bugs and ready to be introduced for the wide mining community. 1) https://bitcointalk.org/index.php?topic=2071108.02) https://forum.z.cash/t/cmd-equihash-miner-autorun-autorestart-watchdog-for-ewbf-claymore-dstm/20640It will definetely reduce your valuable time spent near your rigs, because this script will do all the work for you. Just start it and forget about your rigs, relax or do anything else. In case of any problem this script will restart your miner, or the rig, if necessary. It will notify you by Telegramm message about all problems and corrective actions taken. It is open source code (CMD/BAT, not an .exe or something like this), so anyone can check throug the code if needed. Enjoy your life, let the script to monitor your rigs for you. |
|
|
|
Hello guys! Want to remind to all of you, that if somebody has any problems with stability of EWBF, DSTM, BMINER, CLAYMORE, CC miners or needs some extra control over your rigs please read carefully my message below. I want to introduce you a script, which can solve most of your problems. It is a result of half a year hard work with my beta testers. Now it is clean of any bugs and ready to be introduced for the wide mining community. 1) https://bitcointalk.org/index.php?topic=2071108.02) https://forum.z.cash/t/cmd-equihash-miner-autorun-autorestart-watchdog-for-ewbf-claymore-dstm/20640It will definetely reduce your valuable time spent near your rigs, because this script will do all the work for you. Just start it and forget about your rigs, relax or do anything else. In case of any problem this script will restart your miner, or the rig, if necessary. It will notify you by Telegramm message about all problems and corrective actions taken. It is open source code (CMD/BAT, not an .exe or something like this), so anyone can check throug the code if needed. Enjoy your life, let the script to monitor your rigs for you. |
|
|
|
Hello guys! Want to remind to all of you, that if somebody has any problems with stability of EWBF, DSTM, BMINER, CLAYMORE, CC miners or needs some extra control over your rigs please read carefully my message below. I want to introduce you a script, which can solve most of your problems. It is a result of half a year hard work with my beta testers. Now it is clean of any bugs and ready to be introduced for the wide mining community. 1) https://bitcointalk.org/index.php?topic=2071108.02) https://forum.z.cash/t/cmd-equihash-miner-autorun-autorestart-watchdog-for-ewbf-claymore-dstm/20640It will definetely reduce your valuable time spent near your rigs, because this script will do all the work for you. Just start it and forget about your rigs, relax or do anything else. In case of any problem this script will restart your miner, or the rig, if necessary. It will notify you by Telegramm message about all problems and corrective actions taken. It is open source code (CMD/BAT, not an .exe or something like this), so anyone can check throug the code if needed. Enjoy your life, let the script to monitor your rigs for you. |
|
|
|
Hello guys! Want to remind to all of you, that if somebody has any problems with stability of EWBF, DSTM, BMINER, CLAYMORE, CC miners or needs some extra control over your rigs please read carefully my message below. I want to introduce you a script, which can solve most of your problems. It is a result of half a year hard work with my beta testers. Now it is clean of any bugs and ready to be introduced for the wide mining community. 1) https://bitcointalk.org/index.php?topic=2071108.02) https://forum.z.cash/t/cmd-equihash-miner-autorun-autorestart-watchdog-for-ewbf-claymore-dstm/20640It will definetely reduce your valuable time spent near your rigs, because this script will do all the work for you. Just start it and forget about your rigs, relax or do anything else. In case of any problem this script will restart your miner, or the rig, if necessary. It will notify you by Telegramm message about all problems and corrective actions taken. It is open source code (CMD/BAT, not an .exe or something like this), so anyone can check throug the code if needed. Enjoy your life, let the script to monitor your rigs for you. |
|
|
|
Hello guys! Want to remind to all of you, that if somebody has any problems with stability of EWBF, DSTM, BMINER, CLAYMORE, CC miners or needs some extra control over your rigs please read carefully my message below. I want to introduce you a script, which can solve most of your problems. It is a result of half a year hard work with my beta testers. Now it is clean of any bugs and ready to be introduced for the wide mining community. 1) https://bitcointalk.org/index.php?topic=2071108.02) https://forum.z.cash/t/cmd-equihash-miner-autorun-autorestart-watchdog-for-ewbf-claymore-dstm/20640It will definetely reduce your valuable time spent near your rigs, because this script will do all the work for you. Just start it and forget about your rigs, relax or do anything else. In case of any problem this script will restart your miner, or the rig, if necessary. It will notify you by Telegramm message about all problems and corrective actions taken. It is open source code (CMD/BAT, not an .exe or something like this), so anyone can check throug the code if needed. Enjoy your life, let the script to monitor your rigs for you. |
|
|
|
Hello guys! Want to remind to all of you, that if somebody has any problems with stability of EWBF, DSTM, BMINER, CLAYMORE, CC miners or needs some extra control over your rigs please read carefully my message below. I want to introduce you a script, which can solve most of your problems. It is a result of half a year hard work with my beta testers. Now it is clean of any bugs and ready to be introduced for the wide mining community. 1) https://bitcointalk.org/index.php?topic=2071108.02) https://forum.z.cash/t/cmd-equihash-miner-autorun-autorestart-watchdog-for-ewbf-claymore-dstm/20640It will definetely reduce your valuable time spent near your rigs, because this script will do all the work for you. Just start it and forget about your rigs, relax or do anything else. In case of any problem this script will restart your miner, or the rig, if necessary. It will notify you by Telegramm message about all problems and corrective actions taken. It is open source code (CMD/BAT, not an .exe or something like this), so anyone can check throug the code if needed. Enjoy your life, let the script to monitor your rigs for you. |
|
|
|
Today version 1.9.0 released! Список изменений - 1.9.0 - Добавлена возможность замедления работы скрипта.
- Теперь скрипт будет перезагружать компьютер сразу если майнер завис.
- Исправления отправки статистики на сервер.
- Оптимизация циклов, должно снять нагрузку, особенно с Claymore скриптов.
- Добавлена опция для отключения стандартного вачдога Claymore -wd 0. Используйте ее для увеличения стабильности.
- Обработчики критических ошибок дополнены новыми ошибками.
- Добавлена поддержка Bminer.
- Другие мелкие исправления.
Changelog - 1.9.0 - The ability to slow down the script is added.
- Now the script will reboot the computer immediately if the miner hangs.
- Fixes sending statistics to the server.
- Optimizing cycles, should remove the load, especially with Claymore scripts.
- Added the option to disable the standard watchdog Claymore -wd 0. Use it to increase stability.
- Critical error handlers are supplemented with new errors.
- Added Bminer support.
- Other minor fixes.
Ewbf Equihash
Dstm Equihash
Claymore Equihash
Claymore CryptoNote
Claymore Dagger-Hashimoto
Ccminer tpruvot, alexis (palgin), KlausTPremium price 0.05ZEC
|
|
|
|
|
