I also tried to confirm the second transaction due to low fees, but that's not what I wanted! I think I did a useless double transaction! The transaction has been confirmed, but the other transaction remains, it has not disappeared! however it does the same, there is no problem. it was only to understand the reason for that transaction still there! None of your transactions that were confirmed spends any loutputs from the transaction (37c4286c9772a9519a7). It will remain there until the inputs of that transactions is used and confirmed in another transaction or if the network drops it. The inputs of that transaction is still not confirmed so it probably won't happen for a long time. thanks for the explanation!
|
|
|
wow, it works! Thanks guys, after more than a month, I did it. Now I understand how it works. It is not so difficult! Thank you Congrats! you could have just sent it directly to your exchange now with those small amount utxo, you can consolidate them when the network fee dropped to low level or you could just send them with low fee (but higher than 10s/B) and try to accelerate it thru viabtc every hour I'd better wait for fee to reduce. If I make a transaction again the maximum fees that allows me are 84 satoshi/byte!
|
|
|
So it's okay like that? I add these transactions except the (5d2532) and proceed with the payment? and what amount should I put?
Actually, no. Upon closer inspection, I've saw that your address has loads of dust unspent output related to it. Spending them would result in you paying more to spend them than to actually receive. I would recommend you to exclude any inputs that has 0.0006BTC or less value in it. You can spend however much you want, just like how you are going to spend to Yobit. To spend all, adjust the fee slider to the middle and press max. wow, it works! Thanks guys, after more than a month, I did it. Now I understand how it works. It is not so difficult! Thank you
|
|
|
yes, but these transactions are all confirmed, there are no unconfirmed transactions! How can I do? You aren't supposed to be including any inputs that is unconfirmed. If you do, your transaction can't confirm until the inputs are confirmed. The unconfirmed transaction (37c4286c) has been dropped from the mempool of whichever node you are connecting. That isn't a problem since can't use it for now. Delete the transaction (5d2532) from your from column; it cost more fees to spend it than you would receive. So it's okay like that? I add these transactions except the (5d2532) and proceed with the payment? and what amount should I put?
|
|
|
the last screenshot seems captured from coinb.in page? are you following my tutorial from another thread? you don't need to do that because you have it on electrum already I gave you the link for you to understand only how to obtain the actual private key that works for your uncompressed address you should just use the feature on electrum, and follow what HCP said: The "Coin" Tab (View -> Show Coins) IS the "coin control" in Electrum... you can select "ctrl+click" all the coins you want to spend...
You should also avoid creating that 0.00003602 output that sends to "1JAz" addreesss... it is below the "dust" limit and a lot of nodes are likely to reject your transaction as it is attempting to create a "dust" output.
in addition to that, you should just choose all coin with amount greater than 0.0005 BTCanything lower than that would cost you more to send that its own input value yes, but these transactions are all confirmed, there are no unconfirmed transactions! How can I do?
|
|
|
The "Coin" Tab (View -> Show Coins) IS the "coin control" in Electrum... you can select "ctrl+click" all the coins you want to spend...
Not sure why that other transaction is not showing. I guess the Electrum server you are using has dropped the transaction from it's mempool. In fact, most of the explorers seem to have dropped it as well. It is currently only showing on b.info.
These are the inputs of the transaction, except the highlighted one that I have to delete. Now if I copy them on elecrum you say it works? and then who should I send it not to my address but to that of yobit right?
|
|
|
So I could do a new transaction, without unconfirmed input, great! But how? enable coin control and choose all inputs from 1JAzCquFw... except the amount 0.00395 BTC and allocate sufficient fee to get the transaction confirmed in reasonable time do not create a dust change (0.00003602 BTC) like you did in old transaction before a small change like that would simply burden your future transaction, it costs more to send that its value I can not find the coin control. The only one is the coin tab, but the transactions are all confirmed!
|
|
|
So even doing with a double spent does not solve the problem, right? Is there a way to get out of it? I corrected my post. I wasn't clear on what transaction was the deposit to Yobit. If it's this: 36f93d3b456756671a4451e2143faefd19220eb30110fcb102b4aa9a4a400f57. You can create a replacement transaction but do not include the 0.004BTC unconfirmed input. the deposit is this https://blockchain.info/it/tx/36f93d3b456756671a4451e2143faefd19220eb30110fcb102b4aa9a4a400f57So I could do a new transaction, without unconfirmed input, great! But how?
|
|
|
now I understand. Perfect I succeeded, thank you.
Now, in your opinion, is it better to accelerate the transaction at a paid accelerator or with double spent?
I would not like to pay a lot for the transaction, but only to unlock the transaction with little ammount! It's possible?
If your request is as per your last sentence, definitely not a paid accelerator Paying an accelerator would definitely be out of the equation since there is a huge chain of unconfirmed parent transactions and you have to accelerate each and every of those transaction. Creating a replacement transaction wouldn't work either, if the previous transactions pays a small fee. Either you pay a huge sum of money to an accelerator or create a new transaction with a huge sum of money, neither is viable. Woops. You should script a new transaction and broadcast the new one, excluding the unconfirmed input. So even doing with a double spent does not solve the problem, right? Is there a way to get out of it? If I do as you say, the other 0.09BTC transaction will be unlocked? and how do I do this procedure?
|
|
|
I did it, I imported the private key, but the address that appears later is different from mine!
This is my BTC address 1JAzCquFwPQG7Ko7Bjz8HpJGQb6kkVnRyT
you've imported wrong private key. let me guess it starts with with K or L bc.info gave you private key for compressed address while yours (1JAzCquFw) is uncompressed address check my post here https://bitcointalk.org/index.php?topic=2613960.msg26729170#msg26729170read the instruction on part "acquiring your privkey" , the other instructions are irrelevant to you just a little note, download bitaddress tool from github and run it offline for your own safety after you get the private key that starts with a 5... then you can import it into your electrum if you still have problems after importing, don't hesitate to ask again now I understand. Perfect I succeeded, thank you. Now, in your opinion, is it better to accelerate the transaction at a paid accelerator or with double spent? I would not like to pay a lot for the transaction, but only to unlock the transaction with little ammount! It's possible?
|
|
|
I use blockchain.info, if I try to import the private key or address in electrum tells me "This wallet is watching-only"! How can I solve?
You need to import the private key, not the address. Importing the address into electrum creates a wacht-only wallet. In order to be able to spend funds from this address you need to import the private key. To export your private keys: In blockchain.info's wallet go to 'Settings-> Addresses' and export the private key. Afterwards you have to import this private key into electrum to be able to access your funds. and what amount should I put for the double spent?
This doesn't matter. You just have to create a transaction with the same input ('send the same coins') , the output doesn't matter. I did it, I imported the private key, but the address that appears later is different from mine! This is my BTC address 1JAzCquFwPQG7Ko7Bjz8HpJGQb6kkVnRyT
|
|
|
Because I have another pending transaction connected to this one. If this is not confirmed I lost 0.09BTC!! No, you won't lose your 0.09 BTC. It just stuck and you can't do anything with it until it returned to you or do something to rectify it. Like he said, you'll have to make a huge Child-pays-for-parent transaction paying the fees for ALL the unconfirmed transactions but you'll pay a relatively large amount of bitcoin (~0.04BTC) to make them all confirm.
If your CPFP transaction is successful they'll all confirm at the same time.
CPFP is not the best option for this condition. are you asking him to do 0.04 BTC fee CPFP for confirming utxo of 0.00395 BTC ? @chris190 I suggest you to just re-create your tx (below) if you really need your fund https://blockchain.info/tx/36f93d3b456756671a4451e2143faefd19220eb30110fcb102b4aa9a4a400f57that transaction's main problem is the 0.00395 input and its parent txs, so just exclude it from your tx above and increase your tx fee a bit this could be done by exporting your (1JAzCquFw...) private key from bc.info (or was it electrum?) then importing/using it on other wallet and attempting a double spend transaction if you want to do this way and have problems doing it, feel free to ask more details or help. Thanks for your help. I use blockchain.info, if I try to import the private key or address in electrum tells me "This wallet is watching-only"! How can I solve? and what amount should I put for the double spent?
|
|
|
Allora praticamente sono nella cacca fino al collo! Ho ricevuto una transazione il cui input non è ancora confermato. L'utente che mi ha mandato la transazione ha messo delle fee al limite del possibile! Siccome ho questa transazione bloccata, oltre ad accellerarla, dite che posso in qualche modo con una doppia spesa sbloccare la situazione? qui la discussione in inglese https://bitcointalk.org/index.php?topic=2722418.new#new
|
|
|
Thanks for the explanation. So, I did not send this transaction, I received it from a user who unfortunately put a low fee!! I use http://blockchain.info/ as a BTC wallet So now I do not know how to get out of it! In the meantime I made a deposit on yobit and even this, despite I put a fee of 140satoshi, is still not confirmed because the previous transaction is not confirmed! ( U) I do not know what to do. I absolutely have to confirm this transaction! If in addition to accelerating the transaction, I make a double spend or an RFB, you say that I can solve in some way? thank you
|
|
|
and how can I solve? Because I have another pending transaction connected to this one. If this is not confirmed I lost 0.09BTC!!
|
|
|
cè qualcuno di esperto che sa usare bene elcetrum? Ho un problema di input mancate, sapete come risolvere? grazie
|
|
|
I tried to broadcast the transaction, but it gives me this error. How can I solve?
|
|
|
Hi guys and happy new year. Is there anyone who uses electrum here and is able to do an RFB transaction? I need it urgently, of course I pay you (possibly in ethereum) for the commission to be paid. (Before proceeding let me know how much is the cost, so I decide whether to proceed or not!)
37c4286c9772a9519a741fbe8a3e84c685249d1846466732bf8fd278c67fb20a
thanks
There's no one other then you who can initiate a RBF, as you would need the private keys(?). Also, i doubt that you are able to do one if you don't already had it enabled before sending the transaction, (correct me if i'm wrong).. If you did enable it, simply follow this -> https://freedomnode.com/blog/75/how-to-fix-slow-bitcoin-transactions-with-replace-by-feeyes, I already did. But I do not use electrum, but blockchain.info. I should import the private key and see if I can make the transaction. But when i add the private key, the balance is zero! Now I'm importing my wallet, let's see if I can even by myself. Yes, it's not very difficult.
|
|
|
Hi guys and happy new year. Is there anyone who uses electrum here and is able to do an RFB transaction? I need it urgently, of course I pay you (possibly in ethereum) for the commission to be paid. (Before proceeding let me know how much is the cost, so I decide whether to proceed or not!)
37c4286c9772a9519a741fbe8a3e84c685249d1846466732bf8fd278c67fb20a
thanks
|
|
|
|